Attachment 0017 - TDP 13082834 - XM1128 Base Closure.pdf

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 1

PICATINNY ARSENAL, NEW JERSEY 07806-5000

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

TDPL COVER SHEET RELEASED BY:

1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND

OTHER TECHNICAL DATA LISTED IN THIS TDPL.

2. THIS TDPL IS COMPRISED OF THE FOLLOWING SECTIONS WHICH LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE, PACKAGE AND INSPECT THE MATERIAL BEING PRODUCED. (NA INDICATES NOT APPLICABLE)

FROM TO

A. PRODUCT DRAWINGS AND ASSOCIATED LISTS ........................................ 0001 0001 B. PACKAGING DRAWINGS AND DOCUMENTS ............................................ 0002 0002 C. INSPECTION DRAWINGS AND DOCUMENTS ........................................... N/A D. SPECIFICATIONS AND STANDARDS ............................................... 0003 0004 E. HAZARDOUS COMPONENT SAFETY DATA STATEMENTS ................................. N/A F. OUTSTANDING APPROVED ENGINEERING CHANGES .................................... 0005 0005 G. TDPL NOTE LEGEND ............................................................ 0006 0006

3. DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS LISTED IN THE ABOVE TDPL SECTIONS ARE IDENTIFIED AS TO TYPE BY PREFIX CODES AS FOLLOWS:

NC: NON CATEGORIZED SPEC PD: PACKAGING DATA SHEET

PK: PACKAGING SPEC

4. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDPL IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE REVISION OR AMENDMENT FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDPL. SUPERCEDED SPECIFICATIONS AND STANDARDS WHICH MAYBE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERCEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDPL. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL

PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE.

5. ALL REFERENCES ON DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS TO PICATINNY, FRANKFORD OR ROCK ISLAND ARSENALS WILL BE CONSIDERED AS CHANGED TO COMMANDER, DEVCOM ARMAMENTS CENTER, ATTN: FCDD-ACE-SP BUILDING 12, PICATINNY, NJ 07806-5000

6. ALL REFERENCES TO PARTS LISTS ON US ARMY TANK AUTOMOTIVE COMMAND (TACOM) DRAWINGS SHALL BE DISREGARDED

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

TDPL COVER SHEET RELEASED BY:

7. THE HIGHEST SECURITY CLASSIFICATION CONTAINED WITHIN THIS TECHNICAL DATA PACKAGE IS:

"N NON-CLASSIFIED

THE SECURITY CLASSIFICATION OF DRAWINGS/DOCUMENTS, ASSOCIATED LISTS AND SPECIFICATIONS/STANDARDS ARE SHOWN BY CODE UNDER

THE SEC CL COLUMN.

8. DISTRIBUTION STATEMENT: THE MOST RESTRICTIVE DISTRIBUTION STATEMENT CONTAINED WITHIN THIS TDPL IS:

"D DISTR STATEMENT D - DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY

PER DODI 5230.24, CHANGE 1, 2016, ALLOWABLE DISTRIBUTION STATEMENTS ARE:

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES (REASON) (DATE OF DETERMINATION).

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS (REASON) (DATED OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT E: DISTRIBUTION AUTHORIZED TO DoD COMPONENTS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT F: FURTHER DISSEMINATION ONLY AS DIRECTED BY (CONTROLLING OFFICE) (DATE OF DETERMINATION) OR HIGHER DoD AUTHORITY.

9. 3D MODEL AVAILABLE FOR REFERENCE PURPOSES ONLY

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 1

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

E 19200 12579607 001 0001 A C 08/04/2009 GEOMETRIC SYMBOLS F/DIMENSIONING TOLERANCING

D 19200 13071704 001 0001 D - 06/02/2021 BASE CLOSURE

A 19200 13082834 001 0001 A - 06/02/2021 COAI-XM1128 BASE CLOSURE

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PACKAGING DRAWINGS AND DOCUMENTS

PD A 19200 13071704 001 0001 A - 03/16/2021 BASE CLOSURE

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 3

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-DTL-NS-XM1128 - 00/00/0000 *** DEFICIENCY ***

MIL-A-2550 A B 1 2 10/18/2013 AMMUNITION, GENERAL SPEC FOR...NFND *

Q MIL-DTL-11195 A H 1 08/23/2016 ENAMEL, LUSTERLESS, FAST DRY, VOC COMP *

MIL-DTL-22020 A E 2 08/29/2019 BAGS,TRANSPARENT,FLEX,SEAL,VOLATILE,CRSN *

MIL-DTL-45449 A C 2 1 05/16/2017 PALLET,UNITS,WOOD,F/SHPT OF PJCTL METAL PARTS/PJ *

MIL-S-70703 A - 2 2 11/01/2017 STRAND CAST STEEL, CARBON ALLOY *

MIL-STD-1168 A C 1 02/21/2019 AMMUNITION LOT NUMBER AMMO DATA CARD *

MIL-STD-129 R 2 09/27/2019 MILITARY MARKINGS F/SHIPMENT/STORAGE *

MIL-STD-171 A F 05/31/2011 FINISHING OF METAL AND WOOD SURFACES *

MIL-STD-2073-1 A E 4 04/22/2019 STANDARD PRACTICE F/ MILITARY PACKAGES *

PPP-C-1797 A A 3 08/28/2019 CUSHIONING MATERIAL,RESILIENT,LOW DENSITY *

TT-C-490 A H 09/16/2021 CHEMICAL CONVERSION COATINGS *

ASME-B46.1 A - 06/30/2020 SURFACE TEXTURE **

ASME-Y14.100 A - 11/14/2017 ENGINEERING DRAWING PRACTICES **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASTM-B117 - 11/01/2019 STANDARD PRAC F/SALT OPER SALT SPRAY **

ASTM-D1974/D1974M - 10/01/2016 STANDARD PRACTICE/METHODS CLOS,SEALING **

ASTM-D1974 (REPLACED BY ASTM-D1974/D1974M ) **

ASTM-D5118/D5118M A - 10/01/2020 FABRICATION FIBERBOARD SHIPPING BOXES **

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 4

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

SAE-AMS-STD-595 A 03/01/2021 COLORS USED IN GOVERNMENT PROCUREMENT **

SAE-AMS6415 U 12/01/2016 STEEL, BARS, FORGINGS, AND TUBING **

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 5

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

PREFIX DRAWING/DOCUMENT AFFECTED NUMBER OF ECP DISTRIBUTION APPROVAL CHANGE

CODE CAGE NUMBER IMAGES NUMBER CODE DATE CLASS

OUTSTANDING APPROVED ENGINEERING CHANGES

NOTE - THE FOLLOWING ENGINEERING DOCUMENTS ARE AFFECTED BY APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) WHICH HAVE NOT BEEN INCORPORATED INTO THE AFFECTED DOCUMENTS. THE APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) IDENTIFIED BELOW ARE INCLUDED

WITH AND FORM A PART OF THIS TECHNICAL DATA PACKAGE

19200 13071704 1 R21A2038 D 11/29/2021 M

NCAGE MIL-DTL-45449 1 R21A2023 D 06/29/2021 N

12/08/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 6

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13082834:19200

DOCUMENT NUMBER : A 13082834:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1320-01-689-8999

COAI-XM1128 BASE CLOSURE REQUEST/PRON ID: P22C13

TDPL NOTE LEGEND

DESCRIPTION OF SYMBOLS IN THE NOTE LEGEND

* -Not Furnished - To be obtained from Defense Logistics Agency (DLA) Document Services, http://quicksearch.dla.mil or https://assist.dla.mil

** -Not Furnished - Commercial specifications and standards may be obtained from the publishers. They are not available from government sources.

*** -Not Furnished - Supplied only upon request submitted to the procuring contract officer.

**** -Not Furnished - Supplied only by request to program/project manager.

REF - Reference Drawing.

Q - The Letter (Q) before the specification number indicates that a qualified products list is required. The number of the QPL is the same as the number of the specification

CS - Computer Software Document - The print of this drawing included in the technical data package is not to be used for manufacture. A computer software program on CD, DVD or via a website or FTP will be furnished by the procuring contracting officer upon request.

SB - Stable Base Drawing - The print of this drawing included in the technical data package is not to be used for manufacture. A stable master will be furnished by the procuring contracting officer upon request.

G - Government Furnished Equipment or Material.