Attachment 0016 - TDP 13071733 - XM1128 Metal Parts Assembly.pdf

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 1

PICATINNY ARSENAL, NEW JERSEY 07806-5000

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

TDPL COVER SHEET RELEASED BY:

1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND

OTHER TECHNICAL DATA LISTED IN THIS TDPL.

2. THIS TDPL IS COMPRISED OF THE FOLLOWING SECTIONS WHICH LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE, PACKAGE AND INSPECT THE MATERIAL BEING PRODUCED. (NA INDICATES NOT APPLICABLE)

FROM TO

A. PRODUCT DRAWINGS AND ASSOCIATED LISTS ........................................ 0001 0002 B. PACKAGING DRAWINGS AND DOCUMENTS ............................................ 0003 0003 C. INSPECTION DRAWINGS AND DOCUMENTS ........................................... 0004 0004 D. SPECIFICATIONS AND STANDARDS ............................................... 0005 0009 E. HAZARDOUS COMPONENT SAFETY DATA STATEMENTS ................................. N/A F. OUTSTANDING APPROVED ENGINEERING CHANGES .................................... 0010 0010 G. TDPL NOTE LEGEND ............................................................ 0011 0011

3. DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS LISTED IN THE ABOVE TDPL SECTIONS ARE IDENTIFIED AS TO TYPE BY PREFIX CODES AS FOLLOWS:

DX: SOURCE CONTROL NC: NON CATEGORIZED SPEC

PE: PERFORMANCE SPEC PK: PACKAGING SPEC

4. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDPL IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE REVISION OR AMENDMENT FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDPL. SUPERCEDED SPECIFICATIONS AND STANDARDS WHICH MAYBE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERCEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDPL. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL

PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE.

5. ALL REFERENCES ON DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS TO PICATINNY, FRANKFORD OR ROCK ISLAND ARSENALS WILL BE CONSIDERED AS CHANGED TO COMMANDER, DEVCOM ARMAMENTS CENTER, ATTN: FCDD-ACE-SP BUILDING 12, PICATINNY, NJ 07806-5000

6. ALL REFERENCES TO PARTS LISTS ON US ARMY TANK AUTOMOTIVE COMMAND (TACOM) DRAWINGS SHALL BE DISREGARDED

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

TDPL COVER SHEET RELEASED BY:

7. THE HIGHEST SECURITY CLASSIFICATION CONTAINED WITHIN THIS TECHNICAL DATA PACKAGE IS:

"N NON-CLASSIFIED

THE SECURITY CLASSIFICATION OF DRAWINGS/DOCUMENTS, ASSOCIATED LISTS AND SPECIFICATIONS/STANDARDS ARE SHOWN BY CODE UNDER

THE SEC CL COLUMN.

8. DISTRIBUTION STATEMENT: THE MOST RESTRICTIVE DISTRIBUTION STATEMENT CONTAINED WITHIN THIS TDPL IS:

"D DISTR STATEMENT D - DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY

PER DODI 5230.24, CHANGE 1, 2016, ALLOWABLE DISTRIBUTION STATEMENTS ARE:

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES (REASON) (DATE OF DETERMINATION).

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS (REASON) (DATED OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT E: DISTRIBUTION AUTHORIZED TO DoD COMPONENTS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT F: FURTHER DISSEMINATION ONLY AS DIRECTED BY (CONTROLLING OFFICE) (DATE OF DETERMINATION) OR HIGHER DoD AUTHORITY.

9. 3D MODEL AVAILABLE FOR REFERENCE PURPOSES ONLY

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 1

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

E 19200 12579607 001 0001 A C 08/04/2009 GEOMETRIC SYMBOLS F/DIMENSIONING TOLERANCING

D 19200 12961015 001 0001 A F 01/28/2016 WEBBING

D 19200 12961016 001 0001 A V 06/02/2021 COVER, ROTATING BAND, FLEXIBLE (FRBC)

C 19200 12989961 001 0001 A E 11/17/2017 THINNER, ANTI-SEIZE

DX C 19200 12991256 001 0001 A AC 03/16/2021 PRIMER, INTERIOR, AMMUNITION

F 19200 13015329 001 0001 D D 06/02/2021 PLUG, LIFTING, M107 AND M804

F 19200 13023905 001 0001 A E 06/02/2021 COVER ASSEMBLY

F 19200 13023906 001 0001 A C 06/25/2013 PALLET TOP

D 19200 13029014 001 0001 A D 06/02/2021 U-BOLT ASSEMBLY

D 19200 13071726 001 0001 D - 06/02/2021 XM1128 BODY AND BAND ASSEMBLY

D 19200 13071728 001 0001 D - 06/02/2021 THREAD PROTECTOR, BASE

F 19200 13071732 001 0001 D - 06/02/2021 XM1128 METAL PARTS ASSEMBLY

A 19200 13071733 001 0001 A - 06/02/2021 COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY

D 19200 13071736 001 0001 A - 06/02/2021 BASE ASSEMBLY

D 19200 13071737 001 0001 A - 06/02/2021 DECKBOARD

C 19200 13071738 001 0001 A - 06/02/2021 STRINGER

C 19200 13071739 001 0001 A - 06/02/2021 SKID

C 19200 13071740 001 0001 A - 06/02/2021 IRON CORNER BRACE

DX A 19200 13082831 001 0001 D - 06/02/2021 RESIN

C 19203 9211789 001 0001 A V 01/26/2018 INK, MKG, OPAQUE F/POROUS SURFACES

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 19200 9327806 001 0001 A J 06/02/2021 GASKET, ENERGY ABSORBING LIFTING PLUG

DX C 19200 9340744 001 0001 A P 11/17/2017 COMPOUND, ANTI-SEIZE

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 3

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PACKAGING DRAWINGS AND DOCUMENTS

A 19200 12999545 001 0001 A K 05/06/2021 AMMO/EXP PALLET/PKG LABEL (AEPPL) INSTRU

F 19200 13023905 001 0001 A E 06/02/2021 COVER ASSEMBLY

F 19200 13023906 001 0001 A C 06/25/2013 PALLET TOP

D 19200 13029014 001 0001 A D 06/02/2021 U-BOLT ASSEMBLY

F 19200 13071732 001 0001 D - 06/02/2021 XM1128 METAL PARTS ASSEMBLY REF

D 19200 13071734 001 0001 A - 06/02/2021 PKG & MKG PALLET WD AMMO PROJ 155MM HE

D 19200 13071736 001 0001 A - 06/02/2021 BASE ASSEMBLY

D 19200 13071737 001 0001 A - 06/02/2021 DECKBOARD

C 19200 13071738 001 0001 A - 06/02/2021 STRINGER

C 19200 13071739 001 0001 A - 06/02/2021 SKID

C 19200 13071740 001 0001 A - 06/02/2021 IRON CORNER BRACE

A 28620 1948-4076 001 0001 A 04 08/01/2010 BUNDLING SEP LOAD PJCTLS F/STOR TRANSPORT REF

C 19203 9211789 001 0001 A V 01/26/2018 INK, MKG, OPAQUE F/POROUS SURFACES

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 4

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

INSPECTION DRAWINGS AND DOCUMENTS

A 19200 13071724 001 0001 D - 06/02/2021 ENVELOPE DWG, ULTRASONIC INSP EQUIP & PR

D 19200 13071726 001 0001 D - 06/02/2021 XM1128 BODY AND BAND ASSEMBLY REF

D 19200 13071727 001 0001 D - 06/02/2021 XM1128 BODY, MACHINED

F 19200 13071729 001 0001 D - 06/02/2021 ULTRASONIC INSPEC STD, WALL THICKNESS

F 19200 13071730 001 0001 D - 06/02/2021 ULTRASONIC INSP STD, LONGITUDINAL & RADI

F 19200 13071731 001 0001 D - 06/02/2021 ULTRASONIC INSP STD CIRCUMFERENTIAL & P

A 19200 13082825 001 0001 D - 06/02/2021 ENVELOP DWG MAGNETIC PARTICLE INSPECTION A 19200 13082826 001 0001 D - 06/02/2021 ENVELOPE DWG MAGNETIC PARTICLE INSPECTIO F 19200 13082827 001 0001 D - 06/02/2021 ULTRASONIC INSPEC STD LONGITUDINAL & RAD

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 5

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-DTL-NS-XM1128 - 00/00/0000 *** DEFICIENCY ***

A-A-00208 D 10/01/2013 INK,MARKING,STENCIL,OPAQUE(POROUS/NON-POROUS) *

A-A-208 (REPLACED BY A-A-00208 ) *

A-A-1733 A A 3 09/10/2020 STENCILBOARD...NFND *

A-A-50199 B 07/31/2018 THREAD,POLYESTER CORE,COTTON OR POLYESTE *

A-A-55126 C 12/21/2016 FASTENER TAPES, HOOK AND LOOP, SYNTHETIC *

A-A-59291 A A 2 08/04/2020 INK, MARKING, PARACHUTES & OTHER TEXTILE ITEMS *

DOD-4100.39 - 10/01/2010 FLIS PRICEDURE MAN MULTIPLE APPL & REFE *

FED-STD-191 A 7 08/09/2000 TEXTILE TEST METHODS...NFND *

MIL-A-2550 A B 1 2 10/18/2013 AMMUNITION, GENERAL SPEC FOR...NFND *

MIL-D-3464 A E 1 10/15/2020 DESICCANTS,ACTIVATED BAGGED,PKG USE AND *

Q MIL-DTL-11195 A H 1 08/23/2016 ENAMEL, LUSTERLESS, FAST DRY, VOC COMP *

MIL-DTL-11414 A F 1 04/24/2018 PRIMER,ALKYD,FAST DRY,CORROSION INHIBITING *

MIL-DTL-32263 A - 2 01/10/2018 COVER,FLEXIBLE ROTATING BAND *

MIL-DTL-32263 A - 2 01/10/2018 COVER,FLEXIBLE ROTATING BAND *

QAT-1451 (REPLACED BY MIL-DTL-32263 ) **

MIL-DTL-45449 A C 2 1 05/16/2017 PALLET,UNITS,WOOD,F/SHPT OF PJCTL METAL PARTS/PJ *

MIL-DTL-63268 A B 1 04/14/2016 PLUG, SHOCK ATTENUATING & PLUG, LIFTING *

MIL-E-45829 A 5 10/08/2013 ELCTD,WLD,COPPER,SILICON-DEOXIDIZED...NFND *

Q MIL-E-52891 A B 3 06/17/2015 ENAMEL, LUSTERLESS, ZINC PHOS...NFND *

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 6

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-PRF-61002 A B 2 06/05/2013 PRESSURE-SENSITIVE ADHESIVE LABELS *

MIL-S-50783 A - 1 3 09/08/2020 STEEL ALLOY, SPCL PURPOSE FOR AMMO CMPNT *

MIL-S-70703 A - 2 2 11/01/2017 STRAND CAST STEEL, CARBON ALLOY *

MIL-STD-1168 A C 1 02/21/2019 AMMUNITION LOT NUMBER AMMO DATA CARD *

MIL-STD-129 R 2 09/27/2019 MILITARY MARKINGS F/SHIPMENT/STORAGE *

MIL-STD-130 A N 1 08/26/2019 IDENTIFICATION MARKING OF U.S. MILITARY *

MIL-STD-171 A F 05/31/2011 FINISHING OF METAL AND WOOD SURFACES *

MIL-STD-1916 A - 2 06/05/2014 DOD PREFER MTHDS F/ACCEPTANCE PRODUCT *

NAS410 A - 5 10/30/2020 NAS CERT/QUAL/NONDESTRUCTIVE TEST *

STANAG-4147 - 06/05/2001 CHEMICAL COMPATIBILITY OF AMMO COMPONENT *

TT-C-490 A H 09/16/2021 CHEMICAL CONVERSION COATINGS *

ASME-B46.1 A - 06/30/2020 SURFACE TEXTURE **

ASME-Y14.100 A - 11/14/2017 ENGINEERING DRAWING PRACTICES **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ANSI-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASTM-A1011/A1011M A 09/01/2018 STANDARD SPEC FOR STEEL, SHEET AND STRIP **

ASTM-A1011 (REPLACED BY ASTM-A1011/A1011M ) **

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 7

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-A47/A47M A - 11/01/2018 FERRITIC MALLEABLE IRON CASTINGS **

ASTM-A536 A - 05/01/2019 STANDARD SPEC DUCTILE IRON CASTINGS **

ASTM-A602 - 11/01/2018 AUTO MALLEABLE IRON CASTINGS **

ASTM-A802/A802M A - 09/01/2019 STANDARD PRACTICE FOR STEEL CASTINGS **

ASTM-B117 - 11/01/2019 STANDARD PRAC F/SALT OPER SALT SPRAY **

ASTM-B134/B134M A - 07/01/2021 STANDARD SPECIFICATION F/BRASS WIRE **

ASTM-B633 - 03/01/2019 ELECTRODEPOSITED COATINGS ZINC IRON STEEL **

ASTM-D2000 A - 06/01/2018 RUBBER PRODUCTS IN AUTOM APPL, CLASS **

ASTM-D2582 A - 05/01/2021 STANDARD TEST METH F/PUNCTURE-PROPAGATION **

ASTM-D3951 - 05/01/2018 STANDARD PRACTICE F/COMMERCIAL PKG **

ASTM-D3953 - 05/01/2015 STANDARD SPEC F/STRAPPING FLAT STEEL/SEALS **

ASTM-D4212 - 02/01/2016 STANDARD TEST METHOD VISCOSITY **

ASTM-D4727/D4727M - 04/01/2017 CORRUGATED SOLID FIBERBOARD SHT STOCK **

ASTM-D523 - 05/01/2018 METHOD OF TEST FOR SPECULAR GLOSS **

ASTM-D5363 - 04/01/2016 ANAEROBIC SINGLE-COMPONENT ADHESIVES **

ASTM-D7932 - 09/01/2017 PRINTED, PRESSURE-SENSITIVE ADHESIVE LAB **

ASTM-D882 - 08/01/2018 STANDARD TEST METHOD TENSILE PROPERTIES **

ASTM-E10 - 07/01/2018 STANDARD TEST METHOD BRINELL HARDNESS **

ASTM-E103 - 04/01/2017 TEST METHOD FOR RAPID INDENTATION HARDNESS **

ASTM-E1444/E1444M A - 09/01/2021 STANDARD PRACTICE F/ MAGNETIC PARTICLE TEST **

ASTM-E1444 (REPLACED BY ASTM-E1444/E1444M ) **

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 8

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-E1444/E1444M A - 09/01/2021 STANDARD PRACTICE F/ MAGNETIC PARTICLE TEST **

ASTM-E18 A - 02/01/2020 STANDARD TEST METHOD ROCKWELL HARDNESS **

ASTM-E381 A - 05/01/2020 RATING MACROETCH STEEL, STANDARD METHOD **

ASTM-E399 A - 12/01/2020 LINEAR ELASTIC PLAIN-STAIN FRACTURE **

ASTM-E8/E8M A - 02/01/2021 STANDARD TEST METHOD F/TENSION TESTING **

ASTM-F1667 A - 06/01/2021 STANDARD SPEC DRIVEN FASTENERS **

ASTM-G152 A - 06/01/2021 OPERATING OPEN FLAME CARBON ARC LIGHT **

ASTM-G153 A - 06/01/2021 OPERATING ENCLOSED CARBON ARC LIGHT APPARATUS **

DISA-X12.3 - 01/01/1992 ELECTRONIC BUSINESS DATA INTERCHANGE **

ANSI-X12.3 (REPLACED BY DISA-X12.3 )

DISA-X12.3 - 01/01/1992 ELECTRONIC BUSINESS DATA INTERCHANGE **

ISO-IEC-15415 - 12/15/2011 INFO TECH-AUTO ID & DATA CAPTURE TECHNIQ **

ISO-IEC-15434 - 02/01/2019 INFO-TECH TRANSFER SYNTAX HIGH CAPACITY **

ISO/IEC-16022 - 02/01/2011 INFO TECH-AUTOMATIC ID & DATA CAPTURE TE **

MHI-MH10.8.2 - 01/01/2016 DATA IDENTIFIER/APPLICATION IDENTIFIER STD **

ANSI-MH10.8.2 (REPLACED BY MHI-MH10.8.2 ) **

MHI-MH10.8.2 - 01/01/2016 DATA IDENTIFIER/APPLICATION IDENTIFIER STD **

PARTS100-199 - 10/01/2012 CODE OF FEDERAL REGULATIONS, TITLE 49 **

PARTS100-199 - 10/01/2012 CODE OF FEDERAL REGULATIONS, TITLE 49 **

CFR-49 (REPLACED BY PARTS100-199 ) **

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 9

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

PS-1 - 05/01/2010 STRUCTURAL PLYWOOD(W/TYPICAL APA TRADEMARKS) **

SAE-AMS-STD-595 A 03/01/2021 COLORS USED IN GOVERNMENT PROCUREMENT **

SAE-AMS-STD-595 A 03/01/2021 COLORS USED IN GOVERNMENT PROCUREMENT **

FED-STD-595 (REPLACED BY SAE-AMS-STD-595 ) ***

SAE-AMS2759 A G 04/01/2019 HEAT TREATMENT OF STEEL PARTS GEN REQUIREMENTS **

SAE-AMS2759/1 A J 08/01/2021 HEAT TREATMENT OF CARBON AND LOW-ALLOY STEEL **

SAE-AS3582 - 01/01/2018 PACKING, PREFORMED-O-RING SEAL **

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 10

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

PREFIX DRAWING/DOCUMENT AFFECTED NUMBER OF ECP DISTRIBUTION APPROVAL CHANGE

CODE CAGE NUMBER IMAGES NUMBER CODE DATE CLASS

OUTSTANDING APPROVED ENGINEERING CHANGES

NOTE - THE FOLLOWING ENGINEERING DOCUMENTS ARE AFFECTED BY APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) WHICH HAVE NOT BEEN INCORPORATED INTO THE AFFECTED DOCUMENTS. THE APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) IDENTIFIED BELOW ARE INCLUDED

WITH AND FORM A PART OF THIS TECHNICAL DATA PACKAGE

DG 19200 13071724 1 R21A2038 D 11/29/2021 M

19200 13071726 1 R21A2038 D 11/29/2021 M 19200 13071727 1 R21A2038 D 11/29/2021 M 19200 13071728 1 R21A2038 D 11/29/2021 M 19200 13071732 1 R21A2038 D 11/29/2021 M 19200 13071736 1 R21K2015 D 11/29/2021 N

DX 19200 13082831 1 R21A2038 D 11/29/2021 M

NCAGE MIL-DTL-45449 1 R21A2023 D 06/29/2021 N

12/09/2021 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 11

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13071733:19200

DOCUMENT NUMBER : A 13071733:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 8140-01-689-6709

COAI-PROJ 155MM:HE XM1128 MTL PTS ASSY REQUEST/PRON ID: P22C12

TDPL NOTE LEGEND

DESCRIPTION OF SYMBOLS IN THE NOTE LEGEND

* -Not Furnished - To be obtained from Defense Logistics Agency (DLA) Document Services, http://quicksearch.dla.mil or https://assist.dla.mil

** -Not Furnished - Commercial specifications and standards may be obtained from the publishers. They are not available from government sources.

*** -Not Furnished - Supplied only upon request submitted to the procuring contract officer.

**** -Not Furnished - Supplied only by request to program/project manager.

REF - Reference Drawing.

Q - The Letter (Q) before the specification number indicates that a qualified products list is required. The number of the QPL is the same as the number of the specification

CS - Computer Software Document - The print of this drawing included in the technical data package is not to be used for manufacture. A computer software program on CD, DVD or via a website or FTP will be furnished by the procuring contracting officer upon request.

SB - Stable Base Drawing - The print of this drawing included in the technical data package is not to be used for manufacture. A stable master will be furnished by the procuring contracting officer upon request.

G - Government Furnished Equipment or Material.