102800_-_TOILET_BATH_AND_LAUNDRY_ACCESSORIES.pdf

USDA FOREST SERVICE – BUILDING 26

PHASE 2, NORTH WING RENOVATION

FORT MISSOULA, MISSOULA, MONTANA

TOILET, BATH, AND LAUNDRY ACCESSORIES 102800 - 1

SECTION 102800 - TOILET, BATH, AND LAUNDRY ACCESSORIES

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Public-use washroom accessories.

2. Childcare accessories.

3. Underlavatory guards.

4. Custodial accessories.

1.2 ACTION SUBMITTALS

A. Product Data: For each type of product indicated.

B. Product Schedule: Indicating types, quantities, sizes, and installation locations by room of each accessory required.

1. Identify locations using room designations indicated.

2. Identify products using designations indicated.

1.3 CLOSEOUT SUBMITTALS

A. Maintenance data.

1.4 WARRANTY

A. Special Mirror Warranty: Manufacturer's standard form in which manufacturer agrees to replace mirrors that develop visible silver spoilage defects and that fail in materials or workmanship within specified warranty period.

1. Warranty Period: 15 years from date of Substantial Completion.

PART 2 - PRODUCTS

2.1 PUBLIC-USE WASHROOM ACCESSORIES

A. Paper Towel (Roll) Dispenser, TA-1

1. Bradley, Sensor Activated Roll Paper Towel Dispenser, Model No. 2A02-11

2. Description: Lever-actuated mechanism permits controlled delivery of paper rolls in preset lengths per stroke.

3. Mounting: Surface mounted.

4. Minimum Capacity: 8-inch- wide, 800-foot-long roll.

TOILET, BATH, AND LAUNDRY ACCESSORIES 102800 - 2

5. Material and Finish: Stainless steel, No. 4 finish (satin).

6. Lockset: Tumbler type.

B. Waste Receptacle, TA-2:

1. Bradley, Waste Receptacle, Recessed BradEX, Model No. 3A05

2. Mounting: Open top, recessed.

3. Minimum Capacity: 12 gal.

4. Material and Finish: Stainless steel, No. 4 finish (satin).

5. Liner: 12 gallon vinyl liner #P11-044

C. Foaming-Soap Dispenser, TA-3:

1. GOJO foaming Soap Push Dispenser, Model No. H-2557

2. Description: Designed for dispensing soap in lather form.

3. Mounting: Vertically oriented, surface mounted.

4. Materials: Dove Gray.

5. Capacity: 42 ounce, 1,250 mL

6. Refill Indicator: Window type.

D. Toilet Tissue (Jumbo-Roll) Dispenser, TA-4:

1. Bradley, Toilet Tissue Dispenser, Surface-Mounted BradEX, Model No. 5424

2. Description: One-roll unit.

3. Mounting: Surface mounted.

4. Capacity: 10-inch- diameter rolls.

5. Material and Finish: Stainless steel, No. 4 finish (satin).

6. Lockset: Tumbler type.

7. Refill Indicator: Viewing slot at front.

8. Mounting: Vertically oriented, surface mounted.

9. Materials: Chrome plate finish.

10. Refill Indicator: Window type.

E. Sanitary-Napkin Disposal Unit, TA-5:

1. Bradley, Napkin Disposal, Surface-Mounted BradEX, Model No. 4781-15

2. Mounting: Surface mounted.

3. Door or Cover: Disposal-opening cover.

4. Receptacle: Removable.

5. Material and Finish: Stainless steel, No. 4 finish (satin).

6. Mounting: Surface Mounted.

F. Horizontal Grab Bar, TA-6:

1. Bradley, Grab Bar, 1¼” OD Heavy Duty Stainless Steel Grab Bar with Concealed Mounting, Model No. 832

2. Mounting: Flanges with concealed fasteners.

3. Material: Stainless steel, 0.05 inch thick.

a. Finish: Smooth, No. 4 finish (satin)..

4. Outside Diameter: 1-1/4 inches.

5. Configuration and Length: As indicated on Drawings (36 inches and 42 inches long).

TOILET, BATH, AND LAUNDRY ACCESSORIES 102800 - 3

G. Vertical Grab Bar, TA-7:

1. Bradley, Grab Bar, 1¼” OD Heavy Duty Stainless Steel Grab Bar with Concealed Mounting, Model No. 832

2. Mounting: Flanges with concealed fasteners.

3. Material: Stainless steel, 0.05 inch thick.

a. Finish: Smooth, No. 4 finish (satin).

4. Outside Diameter: 1-1/4 inches.

5. Configuration and Length: 18 inches long.

H. Seat-Cover Dispenser, TA-8:

1. Bradley, Seat Cover Dispenser, Surface-Mounted BradEX, Model No. 5831.

2. Mounting: Surface mounted.

3. Minimum Capacity: 250 seat covers.

4. Exposed Material and Finish: Stainless steel, No. 4 finish (satin).

I. Mirror Unit, TA-9

1. Bradley, Channel-Frame Mirror BradEX, Standard Model No. 781-2436

2. Frame: Stainless-steel channel.

a. Corners: Mitered and mechanically interlocked.

3. Hangers: Produce rigid, tamper- and theft-resistant installation, using method indicated below.

a. One-piece, galvanized-steel, wall-hanger device with spring-action locking mechanism to hold mirror unit in position with no exposed screws or bolts.

4. Size: 2’-0” x 3’-0” as indicated on Drawings.

2.2 CHILDCARE ACCESSORIES

A. Diaper-Changing Station, TA-10

1. Koala Kare Products, KB200-00 horizontal wall mounted baby changing station.

2. Description: Horizontal unit that opens by folding down from stored position and with child-protection strap.

a. Engineered to support a minimum of 250-lb static load when opened.

3. Mounting: Surface mounted, with unit projecting not more than 4 inches from wall when closed.

4. Operation: By pneumatic shock-absorbing mechanism.

5. Material and Finish: HDPE in manufacturer's standard color.

6. Liner Dispenser: Built in.

7. Color: Cream

TOILET, BATH, AND LAUNDRY ACCESSORIES 102800 - 4

2.3 UNDERLAVATORY GUARDS

A. Underlavatory Guard, TA-12:

1. Plumberex specialty Products Inc., Pro-Extreme, ADA Compliant Under-Lav Cover, Model No. X4444.

2. Description: Insulating pipe covering for supply and drain piping assemblies that prevent direct contact with and burns from piping; allow service access without removing coverings.

3. Material and Finish: Antimicrobial, molded plastic, white.

2.4 CUSTODIAL ACCESSORIES

A. Mop and Broom Holder, TA-11

1. Bradley, Utility Shelf BradEX, Model No. 9984.

2. Description: Spring-loaded rubber cam holders with anti-slip coating. Powder coated steel retainers.

3. Length: 36 inches.

4. Mop/Broom Holders: Four, spring-loaded, rubber hat, cam type.

5. Material and Finish: Stainless steel, No. 4 finish (satin).

2.5 FABRICATION

A. Keys: Provide universal keys for internal access to accessories for servicing and resupplying.

Provide minimum of six keys to Owner's representative.

PART 3 - EXECUTION

3.1 INSTALLATION

A. Install accessories according to manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated.

B. Grab Bars: Install to withstand a downward load of at least 250 lbf (1112 N), when tested according to ASTM F 446.

END OF SECTION 102800

4. Size: 2’-0” x 3’-0” as indicated on Drawings.