Add4_Siphonic roof drainage system.pdf

ADDENDUM 4 : Siphonic roof drainage system

100% For Construction Shape Belgian School

S.H.A.P.E., Belgium

PN 328030

October 31, 2023

ABETEC Architects & Engineers nv

GEBERIT PLUVIA SYSTEM (With Pluvia rail system)

Project: SHAPE BELGIAN SCHOOL Study no: 16605 Phase:

Address: 7010 S.H.A.P.E - België Projectmanager: Andy Schouppe Rainfall intensity rate (l/s.m²): 0.05 Date: 29/05/2017

The calculations were made taking into account a rainfall intensity of 0.05 l/s.m² or 3 l/min.m².

Should another calculation be required with different rainfall intensity, please forward your request in writing.

The Geberit Pluvia system requires the same level of maintenance as a conventional roof drainage system. Therefore we also assume that your company will inform the end-user sufficiently on the maintenance of the system.

Our project department doesn’t practices engineering and therefore it restricts itself merely to the offer of counsel concerning our products. Our technical service has designed a perfectly performing roof drainage system, based on the information offered by your company. It has to be stated clearly that, upon reception of the isometric drawings and calculations, it stays the sole responsibility of the inquirer, to verify if:

1) the proposed system is fit to be installed, taking into account the constructional facilities.

2) the area of roof draining to each outlet corresponds to the actual situation.

3) the lengths and the heights of the piping system are correct, while these form the base of our calculations.

4) the present or anticipated sewer system is able to cope with the maximal flow intensity.

5) overflow measures, with sufficient drain capacity, are provided for.

6) the contact sheets of the Pluvia outlets are compatible with the roof lining and structure.

Included in the enclosed material list are:

Bends, T-pieces, reductions and the amount of pipe necessary for the project.

Up to diameter 160mm the list contains electrical welding sockets for 15% of all the connections to be made. From diameter 200mm on this amount is increased to 25%.

The number of outlets needed.

A fixing system with rail fixing features with a length equal or larger than 1 meter.

The expansion sockets for the vertical pipe sections.

Not included in the enclosed material list are:

Fixing materials (clamps, etc. …) for the vertical pipe sections.

Isolation material for the pipes (if necessary).

Roof outlet type:

The type of the Pluvia outlet has to be adapted by the inquirer to the roof lining, roof structure and if necessary to the vapour barrier.

Installation instructions:

Expansion sockets for horizontal piping systems are admitted up to diameter 110mm. From diameter 125mm on, the piping system has to be installed ‘fixed’ or with ‘expansion loops’ to be able to cope with possible expansions of the system.

The assembly has to be executed as it is mentioned on the isometric drawings.

Whatever the circumstances it is not allowed to use T-pieces 88.5° and insertion sockets type …779 in Geberit Pluvia systems. When modifications to the initial plan are mandatory during the installation works, always contact our advisors.

29/05/2017 - Page 1 of 22

The warranty for a well performing roof drainage installation is only valid if the roof drainage installation fulfills these conditions and after the inspection by one of our project advisors.

The warranty is only valid when all piping system products (pipes, fittings and accessories) are authentic Geberit products.

Pluvia rail system for pipes up to diameter 200mm

* A Ceiling fastening point with threaded rod M10 by means of:

- steel square pipe clamp

- steel square pipe connection element

AA Distance between 2 fastening points: 2,5 meters.

Steel square pipe 362.863.26.0

Connection element 362.864.26.0

Clamp 362.862.26.0

29/05/2017 - Page 2 of 22

* F Fixed point by means of Geberit Pluvia clamp in combination with electroweld tape (diameter 40mm up to 200mm)

FA Distance in between 2 fixed points should not exceed 20 meters and a minimum of 2 meters. To be installed at the end of every Pluvia rail system (also where the square pipe profile has been interrupted).

Also every branch (T-piece 45°) on the collector has to be equipped with one additional fixed point on the largest diameter.

* G Sliding clamp by means of Geberit Pluvia clamp.

GA Distance in between 2 clamps: maximum 10x the pipe diameter (e.g. diameter 63 x 10 = 63cm)

Remark:

* It is recommended, depending on the conditions of the piping system, to install a secondary connection in a 90° angle to the main fastening points, every 10 meters.

* To prevent possible mechanical stresses to occur in between roof lining and the outlets, it is necessary to install a fixed point at every Pluvia outlet.

Overview table with the weights [kg] per ceiling fastening point, taking into account an interval of

2.5 meters without support shell.

RA = distance in between clamps [meters]

Pluvia guiding clamp Anchor point with electroweld tape

Guide clamps steel (rail only)

360. – 370.681.00.1

Electro weld tapes 36x.776.16.1

Tension wedge for sliding and anchor clamp 362.865.26.0

29/05/2017 - Page 3 of 22

Vertical installation

Distance in between expansion sockets (= anchor points): 6 meters Distance in between clamps: 15x pipe diameter

The vertical pipes have to be installed in a conventional way.

29/05/2017 - Page 4 of 22

Geberit Pluvia rail system diameter 250mm

Geberit Pluvia rail system diameter 315mm

29/05/2017 - Page 5 of 22

Project number: 16605 Page 1 / 7

Project name: Shape Belgian School

Project description: Date: 29/05/2017 14:01:08

Person responsible: Dirk Waterschoot

Project cover sheet

Project data Project number: 16605

Project name: Shape Belgian School

Postal code: 7010

Date created: vrijdag 14 oktober 2016

Date changed: maandag 29 mei 2017

Subprojects 001 (Roof drainage systems)

101 - situatie 4x (Roof drainage systems)

102 - situatie 3x (Roof drainage systems)

103 (Roof drainage systems)

104 (Roof drainage systems)

105 (Roof drainage systems)

106 (Roof drainage systems)

107 (Roof drainage systems)

Changes 0 14/10/2016 Dirk Waterschoot ProPlanner project aangemaakt

1 12/12/2016 Karolien Neirinck wijziging tracé.

2 5/01/2017 Leen Abbeloos Wijziging tracé op vraag van Abetec

3 20/01/2017 Leen Abbeloos Wijziging keldertracé op vraag van Abetec

4 10/04/2017 Karolien Neirinck 2 dakvlakken toegevoegd + noodoverstort.

5 16/05/2017 Karolien Neirinck Wijziging noodoverstort

Plumber/sanitary engineer Company: Geberit nv

Street: Beaulieustraat 6

Postal code: 1830

City: Machelen

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Project: 16605 (X:\PDF\16605\16605.gpp)

Geberit ProPlanner 2017 (4.0.0.0), Belgium (flemish) (4.0.0.0)

Geberit nv, BE-1830 Machelen, Belgium

29/05/2017 - Page 6 of 22

Project number: 16605 Page 2 / 7

Project description: Date: 29/05/2017 14:01:08

Person responsible: Dirk Waterschoot

Project cover sheet

Fax: pluvia.be@geberit.com

Project: 16605 (X:\PDF\16605\16605.gpp)

Geberit ProPlanner 2017 (4.0.0.0), Belgium (flemish) (4.0.0.0)

Geberit nv, BE-1830 Machelen, Belgium

29/05/2017 - Page 7 of 22

Project number: 16605 Page 3 / 7

Project description: Date: 29/05/2017 14:01:08

Person responsible: Dirk Waterschoot

Material list Roof drainage systems

Quantity Art. no. Article description

Roof outlets 24 pcs 359.105.00.1 Geberit Pluvia trechter met klemflens, voor synthetische dakafdichtingen: 12l/s 12 pcs 359.114.00.1 Geberit Pluvia noodoverloop 12 l/s

Pipes 14,7 m 360.000.16.0 Geberit PE buis: d40mm

109,1 m 361.000.16.0 Geberit PE buis: d50mm

137,5 m 363.000.16.0 Geberit PE buis: d56mm

26,1 m 364.000.16.0 Geberit PE buis: d63mm

26,4 m 365.000.16.0 Geberit PE buis: d75mm

14,9 m 366.000.16.0 Geberit PE buis: d90mm

25,8 m 367.000.16.0 Geberit PE buis: d110mm

39,0 m 368.000.16.0 Geberit PE buis: d125mm

28,3 m 369.000.16.0 Geberit PE buis: d160mm

11,8 m 370.000.16.0 Geberit PE buis: d200mm

Fittings 2 pcs 360.055.16.1 Geberit PE bocht met lang been: 90° d40mm

4 pcs 360.700.16.1 Geberit PE uitzettingsmof met dubbele kraag: d40mm

7 pcs 360.771.16.1 Geberit elektrolasmof: d40mm

1 pcs 361.045.16.1 Geberit PE bocht: 45° d50mm

36 pcs 361.055.16.1 Geberit PE bocht met lang been: 90° d50mm

5 pcs 361.558.16.1 Geberit PE reductie excentrisch, kort: d50mm d1=40mm

18 pcs 361.700.16.1 Geberit PE uitzettingsmof met dubbele kraag: d50mm

22 pcs 361.771.16.1 Geberit elektrolasmof: d50mm

2 pcs 363.045.16.1 Geberit PE bocht: 45° d56mm

26 pcs 363.055.16.1 Geberit PE bocht met lang been: 90° d56mm

1 pcs 363.115.16.1 Geberit PE T-stuk 45°: d56mm d1=56mm

1 pcs 363.558.16.1 Geberit PE reductie excentrisch, kort: d56mm d1=40mm

Subproject: 001, 4 x 101 - situatie 4x, 3 x 102 - situatie 3x, 103, 104, 105, 106, 107 Project: 16605 (X:\PDF\16605\16605.gpp)

Geberit ProPlanner 2017 (4.0.0.0), Belgium (flemish) (4.0.0.0)

Geberit nv, BE-1830 Machelen, Belgium

All material data is provided without guarantee.

29/05/2017 - Page 8 of 22

Project number: 16605 Page 4 / 7

Project description: Date: 29/05/2017 14:01:08

Person responsible: Dirk Waterschoot

Material list Roof drainage systems

Quantity Art. no. Article description

25 pcs 363.561.16.1 Geberit PE reductie excentrisch, kort: d56mm d1=50mm

18 pcs 363.700.16.1 Geberit PE uitzettingsmof met dubbele kraag: d56mm

41 pcs 363.771.16.1 Geberit elektrolasmof: d56mm

4 pcs 364.045.16.1 Geberit PE bocht: 45° d63mm

3 pcs 364.055.16.1 Geberit PE bocht met lang been: 90° d63mm

5 pcs 364.566.16.1 Geberit PE reductie excentrisch, kort: d63mm d1=56mm

4 pcs 364.700.16.1 Geberit PE uitzettingsmof met dubbele kraag: d63mm

3 pcs 364.771.16.1 Geberit elektrolasmof: d63mm

3 pcs 365.045.16.1 Geberit PE bocht: 45° d75mm

5 pcs 365.055.16.1 Geberit PE bocht met lang been: 90° d75mm

5 pcs 365.566.16.1 Geberit PE reductie excentrisch, kort: d75mm d1=56mm

1 pcs 365.571.16.1 Geberit PE reductie excentrisch, kort: d75mm d1=63mm

1 pcs 365.700.16.1 Geberit PE uitzettingsmof met dubbele kraag: d75mm

4 pcs 365.771.16.1 Geberit elektrolasmof: d75mm

2 pcs 366.045.16.1 Geberit PE bocht: 45° d90mm

3 pcs 366.055.16.1 Geberit PE bocht met lang been: 90° d90mm

1 pcs 366.125.16.1 Geberit PE T-stuk 45°: d90mm d1=75mm

2 pcs 366.576.16.1 Geberit PE reductie excentrisch, kort: d90mm d1=75mm

1 pcs 366.700.16.1 Geberit PE uitzettingsmof met dubbele kraag: d90mm

2 pcs 366.771.16.1 Geberit elektrolasmof: d90mm

1 pcs 367.045.16.1 Geberit PE bocht: 45° d110mm

1 pcs 367.120.16.1 Geberit PE T-stuk 45°: d110mm d1=63mm

1 pcs 367.130.16.1 Geberit PE T-stuk 45°: d110mm d1=90mm

2 pcs 367.566.16.1 Geberit PE reductie excentrisch, kort: d110mm d1=56mm

2 pcs 367.771.16.1 Geberit elektrolasmof: d110mm

1 pcs 368.045.16.1 Geberit PE bocht: 45° d125mm

1 pcs 368.055.16.1 Geberit PE bocht met lang been: 90° d125mm

3 pcs 368.120.16.1 Geberit PE T-stuk 45°: d125mm d1=63mm

2 pcs 368.586.16.1 Geberit PE reductie excentrisch, kort: d125mm d1=110mm

Subproject: 001, 4 x 101 - situatie 4x, 3 x 102 - situatie 3x, 103, 104, 105, 106, 107 Project: 16605 (X:\PDF\16605\16605.gpp)

Geberit ProPlanner 2017 (4.0.0.0), Belgium (flemish) (4.0.0.0)

Geberit nv, BE-1830 Machelen, Belgium

29/05/2017 - Page 9 of 22

Project number: 16605 Page 5 / 7

Project description: Date: 29/05/2017 14:01:08

Person responsible: Dirk Waterschoot

Material list Roof drainage systems

Quantity Art. no. Article description

3 pcs 368.771.16.1 Geberit elektrolasmof: d125mm

1 pcs 369.045.16.1 Geberit PE bocht: 45° d160mm

1 pcs 369.125.16.1 Geberit PE T-stuk 45°: d160mm d1=75mm

1 pcs 369.130.16.1 Geberit PE T-stuk 45°: d160mm d1=90mm

1 pcs 369.145.16.1 Geberit PE T-stuk 45°: d160mm d1=160mm

2 pcs 369.588.16.1 Geberit PE reductie excentrisch, kort: d160mm d1=125mm

2 pcs 369.771.16.1 Geberit elektrolasmof: d160mm

1 pcs 370.055.16.1 Geberit PE segmentbocht: 90° d200mm

1 pcs 370.125.16.1 Geberit PE T-stuk 45°: d200mm d1=75mm

1 pcs 370.594.16.5 Geberit PE reductie excentrisch, lang: d200mm d1=160mm

2 pcs 370.775.16.1 Geberit PE thermolasmof: d200mm

Fastening material 6 pcs 360.841.00.2 Geberit beugel met draadmof G 1/2", instelbaar: G1/2" d1=40mm d2=48mm 11 pcs 360.843.00.2 Geberit beugel met draadmof M10, instelbaar: d1=40mm d2=48mm

14 pcs 361.776.16.1 Geberit elektrolasband voor vast punt: d50mm d1=58mm

27 pcs 361.841.00.2 Geberit beugel met draadmof G 1/2", instelbaar: G1/2" d1=50mm d2=58mm

91 pcs 361.843.00.2 Geberit beugel met draadmof M10, instelbaar: d1=50mm d2=58mm

14 pcs 361.861.00.1 Geberit Pluvia beugel instelbaar: d1=50mm d2=58mm

112 pcs 362.839.00.1 Geberit bevestigingsplaat rechthoekig met afgeronde hoeken, twee gaten, met draadmof G 1/2": G1/2"

49 pcs 362.862.26.1 Geberit Pluvia ophangelement

168,1 m 362.863.26.1 Geberit Pluvia montagerail

30 pcs 362.864.26.1 Geberit Pluvia verbindingselement

356 pcs 362.865.26.1 Geberit Pluvia bevestigingsspie

18 pcs 363.776.16.1 Geberit elektrolasband voor vast punt: d56mm d1=64mm

27 pcs 363.841.00.2 Geberit beugel met draadmof G 1/2", instelbaar: G1/2" d1=56mm d2=64mm

99 pcs 363.843.00.2 Geberit beugel met draadmof M10, instelbaar: d1=56mm d2=64mm

Subproject: 001, 4 x 101 - situatie 4x, 3 x 102 - situatie 3x, 103, 104, 105, 106, 107 Project: 16605 (X:\PDF\16605\16605.gpp)

Geberit ProPlanner 2017 (4.0.0.0), Belgium (flemish) (4.0.0.0)

Geberit nv, BE-1830 Machelen, Belgium

29/05/2017 - Page 10 of 22

Project number: 16605 Page 6 / 7

Project description: Date: 29/05/2017 14:01:08

Person responsible: Dirk Waterschoot

Material list Roof drainage systems

Quantity Art. no. Article description

40 pcs 363.861.00.1 Geberit Pluvia beugel instelbaar: d1=56mm d2=64mm

2 pcs 364.776.16.1 Geberit elektrolasband voor vast punt: d63mm d1=71mm

6 pcs 364.841.00.2 Geberit beugel met draadmof G 1/2", instelbaar: G1/2" d1=63mm d2=71mm

23 pcs 364.843.00.2 Geberit beugel met draadmof M10, instelbaar: d1=63mm d2=71mm

6 pcs 365.776.16.1 Geberit elektrolasband voor vast punt: d75mm d1=83mm

2 pcs 365.841.00.2 Geberit beugel met draadmof G 1/2", instelbaar: G1/2" d1=75mm d2=83mm

5 pcs 365.843.00.2 Geberit beugel met draadmof M10, instelbaar: d1=75mm d2=83mm

30 pcs 365.861.00.1 Geberit Pluvia beugel instelbaar: d1=75mm d2=83mm

4 pcs 366.776.16.1 Geberit elektrolasband voor vast punt: d90mm d1=98mm

2 pcs 366.841.00.2 Geberit beugel met draadmof G 1/2", instelbaar: G1/2" d1=90mm d2=98mm

4 pcs 366.843.00.2 Geberit beugel met draadmof M10, instelbaar: d1=90mm d2=98mm

12 pcs 366.861.00.1 Geberit Pluvia beugel instelbaar: d1=90mm d2=98mm

7 pcs 367.776.16.1 Geberit elektrolasband voor vast punt: d110mm d1=118mm

27 pcs 367.861.00.1 Geberit Pluvia beugel instelbaar: d1=110mm d2=118mm

12 pcs 368.776.16.1 Geberit elektrolasband voor vast punt: d125mm d1=133mm

34 pcs 368.861.00.1 Geberit Pluvia beugel instelbaar: d1=125mm d2=133mm

8 pcs 369.776.16.1 Geberit elektrolasband voor vast punt: d160mm d1=168mm

23 pcs 369.861.00.1 Geberit Pluvia beugel instelbaar: d1=160mm d2=168mm

3 pcs 370.776.16.1 Geberit elektrolasband voor vast punt: d200mm d1=208mm

7 pcs 370.861.26.1 Geberit Pluvia beugel instelbaar, met veiligheidsbeugel: d200mm d1=200mm d2=208mm

49 pcs Draadstang M10

Welding joints 379 pcs Aantal lasverbindingen

Note:

Ensure that Pluvia roof outlets are compatible with the on-site roof structure.

Subproject: 001, 4 x 101 - situatie 4x, 3 x 102 - situatie 3x, 103, 104, 105, 106, 107 Project: 16605 (X:\PDF\16605\16605.gpp)

Geberit ProPlanner 2017 (4.0.0.0), Belgium (flemish) (4.0.0.0)

Geberit nv, BE-1830 Machelen, Belgium

29/05/2017 - Page 11 of 22

Project number: 16605 Page 7 / 7

Project description: Date: 29/05/2017 14:01:08

Person responsible: Dirk Waterschoot

Material list Roof drainage systems

Quantity Art. no. Article description

The fastening material for vertical installation with an expansion socket can only be used for a wall distance of 20 cm. Other installation rules must be taken into account for different wall distances.

Subproject: 001, 4 x 101 - situatie 4x, 3 x 102 - situatie 3x, 103, 104, 105, 106, 107 Project: 16605 (X:\PDF\16605\16605.gpp)

Geberit ProPlanner 2017 (4.0.0.0), Belgium (flemish) (4.0.0.0)

Geberit nv, BE-1830 Machelen, Belgium

29/05/2017 - Page 12 of 22

29/05/2017 - Page 13 of 22

29/05/2017 - Page 14 of 22

Product range legend Geberit PE

Colour legend for fastening type Direct installation (expansion socket) No fastening Support rail (rigid)

Traditionele diameter 315 met 1,5% helling of diameter 400 met 1%.

plafond kelder plafond kelder

Zie bevestigingsvoorwaarden op het voorblad van deze studie.

S 50 9,3 l/s 0,35 m

S m m

,0 m

S 4856 mm0,50 m

S m m 0, m

S 45 9,3 l/s 0,35 m

S m m

,0 m

S 4356 mm0,50 m

S m m 0, m

S 40 4,7 l/s 0,35 m

S m m 8, m

S 3856 mm0,50 m

S m m 0, m

S 32125 mm0,20 m

S 62 9,3 l/s 0,35 m

S m m

,0 m

S 58s51s31s5 75 mm 0,70 m

S 6056 mm0,50 m

S m m 0, m

S 57 9,3 l/s 0,35 m

S m m

,0 m

S 53 63 mm 0,70 m

S 5556 mm0,50 m

S m m 0, m

S 30 8,3 l/s 0,35 m

S m m

,0 m

S 2850 mm0,50 m

S 29 50 mm 0,20 m

S 25 8,3 l/s 0,35 m

S m m

,0 m

S 2356 mm0,50 m

S 24 56 mm 0,20 m

S 66 50 mm 0,20 m

S 65 50 mm 0,50 m

S m m

,0 m

S 67 8,3 l/s 0,35 m

S 80 50 mm 0,20 m

S 79 50 mm 0,50 m

S m m

,0 m

S 81 8,3 l/s 0,35 m

S 75 50 mm 0,20 m

S 7450 mm0,50 m

S 72 50 mm 0,70 m

S m m 8, m

S 76 4,7 l/s 0,35 m

S 31s5160 mm18,00 m

91,0 l/s

S 77s68s1 56 mm 0,50 m

S 1 200 mm 0,50 m

S 2200 mm1,30 m

S 46s33 63 mm 0,70 m

S 33

125 mm

7,50 m

S 41s34 63 mm 0,70 mS 34

110 mm

19,50 m

S 36 56 mm 0,70 m

S 35

56 mm

12,50 m

S 51s31s5

90 mm

9,50 m

S 52

75 mm

21,00 m

S 26s6 56 mm 0,70 m

S 21s7 56 mm 0,70 m

S 6 125 mm

12,50 m

S 63s4 56 mm 0,70 m

S 5 160 mm

2,80 m

S 68s1 56 mm 0,30 m

S 69

56 mm

6,00 m

S 70 50 mm 1,00 m

S 71

50 mm

7,40 m

S 7 125 mm

18,50 m

S 8 125 mm 0,30 m

S 9 110 mm 0,50 m

S 15 4,9 l/s 0,35 m

S m m 8, m

S 1350 mm0,50 m

S m m 0, m

S 20 6,3 l/s 0,35 m

S 1890 mm0,50 m

S 19 75 mm 0,20 m

S 16s1090 mm0,70 m

S 10

110 mm

5,80 m

S 11

56 mm

7,80 m

S m m 4, m

S 4 160 mm

7,50 m

S 3 200 mm

10,00 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 001

Subproject: 001

Street: Beaulieustraat 6

Postal code: 1830

City: Machelen Created: 14/10/2016 Changed: 29/05/2017

29/05/2017 - P age 15 of 22

Colour legend for fastening type Direct installation (expansion socket) No fastening

Uitloop boven maaiveld situatie 4x

+ Noodoverstortelement 359.114

S 5 9,3 l/s 0,35 m

S m m

,0 m

S 350 mm0,50 m

S m m 0, m

9,3 l/s

S 1 56 mm 0,50 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 101 - situatie 4x

Subproject: 101 - situatie 4x

Street: Beaulieustraat 6

Postal code: 1830

City: Machelen Created: 14/10/2016 Changed: 29/05/2017

29/05/2017 - Page 16 of 22

Colour legend for fastening type Direct installation (expansion socket) No fastening

Uitloop boven maaiveld situatie 3x

+ Noodoverstortelement 359.114

8,3 l/s

S 5 8,3 l/s 0,35 m

S m m

,0 m

S 350 mm0,50 m S 4 50 mm 0,20 m

S 1 50 mm 0,50 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 102 - situatie 3x

Subproject: 102 - situatie 3x

Street: Beaulieustraat 6

Postal code: 1830

29/05/2017 - Page 17 of 22

Colour legend for fastening type Direct installation (expansion socket) No fastening

Uitloop boven maaiveld

+ Noodoverstortelement 359.114

4,7 l/s

S 5 4,7 l/s 0,35 m

S m m 7, m

S 350 mm0,50 m S 4 50 mm 0,20 m

S 1 50 mm 0,50 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 103

Subproject: 103

Street: Beaulieustraat 6

Postal code: 1830

29/05/2017 - Page 18 of 22

Colour legend for fastening type Direct installation (expansion socket) No fastening

Uitloop boven maaiveld

+ Noodoverstortelement 359.114

S 5 4,7 l/s 0,35 m

S m m 7, m

S 350 mm0,50 m

S m m 0, m

4,7 l/s

S 1 50 mm 0,50 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 104

Subproject: 104

Street: Beaulieustraat 6

Postal code: 1830

29/05/2017 - Page 19 of 22

Colour legend for fastening type Direct installation (expansion socket) No fastening

Uitloop boven maaiveld

+ Noodoverstortelement 359.114

4,9 l/s

S 5 4,9 l/s 0,35 m

S m m 7, m

S 340 mm0,50 m S 4 40 mm 0,20 m

S 1 50 mm 0,50 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 105

Subproject: 105

Street: Beaulieustraat 6

Postal code: 1830

29/05/2017 - Page 20 of 22

Colour legend for fastening type Direct installation (expansion socket) No fastening

Uitloop boven maaiveld

+ Noodoverstortelement 359.114

8,3 l/s

S 5 8,3 l/s 0,35 m

S m m 7, m

S 356 mm0,50 m S 4 56 mm 0,20 m

S 1 56 mm 0,50 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 106

Subproject: 106

Street: Beaulieustraat 6

Postal code: 1830

29/05/2017 - Page 21 of 22

Colour legend for fastening type Direct installation (expansion socket) No fastening

+ Noodoverstortelement 359.114

12,0 l/s

S 5 12,0 l/s 0,35 m

S m m 3, m

S 4 56 mm 0,20 mS 3

75 mm

0,50 m

S 1 75 mm

0,50 m

Project no.:

16605

Person responsible: Dirk Waterschoot

Telephone: 02/257.42.36

Fax: pluvia.be@geberit.com

Project: Shape Belgian School

Description: 107

Subproject: 107

Street: Beaulieustraat 6

Postal code: 1830

29/05/2017 - Page 22 of 22