A15 - CDRL C001 Safety Training2025.pdf

PDF 126 KB Posted

Attached to
Southeast Regional Maintenance Center (SERMC) - Combat Systems Services
Solicitation number
N4002725R3000
Issued by

About this file

This is a Contract Data Requirements List (CDRL) form DD 1423-1 documenting one required data item for a federal contract.

The contract requires submission of Safety Training Requirement Completion Certificates as the primary data item. The contractor must provide documentation of required safety training for each employee in accordance with 29 CFR 1915 OSHA standards for shipyard employment. Submissions are required initially and annually, with the first submission due per Block 16 requirements and subsequent annual submissions thereafter. Two copies total are required: one to SERMC C200 TPOC and one to SERMC COR. The contract references PWS Sections C.11 and C.27, with specific training requirements detailed in Block 16 remarks including hazard assessments per C.27.3.1; confined space and dangerous atmosphere training per C.27.4.1; fall protection training per C.27.5.1; Work Authorization Form (WAF) process training per C.27.6.2; Tag Out Users Manual (TUM) training per C.27.7.2 and C.27.7.4; SERMC safety requirements presentations per C.27.8.1; valid 10-hour OSHA Maritime Shipyard Employment Course completion per C.27.9.1; and OSHA Form 300A Summary submission per C.27.11 for contractors with employees working over 1,000 hours quarterly in government spaces. The form was prepared on 3/7/2025 and is assigned to SERMC as the requiring office.

View the file

Other files

Show all 25

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

data_item: C001
title: Safety Taining Requirement
sub: Completion Certificates
auth:
ref: PWS Sections C.11 & C.27
req_ofc: SERMC
dd250: N/A
appcode: N/A
dist: N/A
freq: initially/annually
asof: N/A
firstsub: SEE BLK 16
subsub: SEE BLK 16
addressee1: SERMC C200 TPOC
draft1:
reg1: 1
repro1:
addressee2: SERMC COR
draft2:
reg2: 1
repro2:
addressee3:
draft3:
reg3:
repro3:
addressee4:
draft4:
reg4:
repro4:
addressee5:
draft5:
reg5:
repro5:
addressee6:
draft6:
reg6:
repro6:
addressee7:
draft7:
reg7:
repro7:
addressee8:
draft8:
reg8:
repro8:
addressee9:
draft9:
reg9:
repro9:
addressee10:
draft10:
reg10:
repro10:
addressee11:
draft11:
reg11:
repro11:
addressee12:
draft12:
reg12:
repro12:
addressee13:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0
total_reg: 2
total_repro: 0
remarks: The contractor shall submit documents of required safety training for each employee IAW 29 CFR 1915 OSHA standards for Shipyard Employment.

C.27.3.1 IAW 29 CFR 1915 152(b)(4) Employer will conduct a hazard assessment for each employee and provide documentation of training IAW 29 CFR 1915.152(e) to SERMC.

C.27.4.1 IAW 29 CFR 1915.12(d) through (d)(4)(ii) Employer will provide confined space, enclosed space, or other areas of dangerous atmospheres training to each employee shown to require it from the hazard assessment. Employer will provide documentation of training IAW 29 CFR 1915.12(d)(5) to SERMC.

C.27.5.1 IAW 29 CFR 1915.159(d) Employer will provide Fall protection training for each employee shown to require it from the hazard assessment. Employer will provide documentation of training IAW 29 CFR 1915.159(d) to SERMC.

C.27.6.2 IAW COMUSFLTFORCOMINST 4790.3 (JFMM) Employer will provide Work Authorization Form (WAF) process training for each employee shown to require it from the hazard assessment. Employer will provide documentation of training to SERMC.

C.27.7.2 IAW S0400-AD-URM-010/TUM Tag Out Users Manual (TUM) Employer will provide Tag Out training for each employee shown to require it from the hazard assessment and who are assigned (RA) Repair Activity Representative.

Employer will provide documentation of training IAW 29 CFR 1915.89(o) to SERMC.

C.27.7.4 IAW S0400-AD-URM-010/TUM Tag Out Users Manual (TUM) Employer will provide Basic Tag Out training for each employee shown to require it from hazard assessment and who are not assigned (RA) Repair Activity Representative. Employer will provide documentation of training IAW 29 CFR 1915.89(o) to SERMC.

C.27.8.1 IAW SERMC Safety Requirements Employer will conduct SERMC provided training presentations for the following subjects. (1) Intro. to VPP (2) PPEINST5100.4B

(3) Shipboard Fire Safety Plan (4) Safety SOP Fire Prevention. Employer will provide documentation of training to SERMC.

group:
total_price:
prep_name:
line_item:
exhibit:
xtdp: Off
xtm: Off
othercat: ADMIN
system:
ctr_no:
contr:
remarksb:

C.27.9.1 Employees that will be conducting tasks shipboard shall have a valid 10 hour OSHA Maritime Shipyard Employment Course #7615 completion Card with in 60 days of employment and shall maintain qualifications. Employer will provide a copy of the OSHA outreach training program report as documentation of course #7615 completion until cards are received by SERMC.

C.27.11 Contractor whose employees perform work within Government spaces in excess of 1000 hours per calendar quarter during a calendar year shall submit the data elements on OSHA form 300A Summary or work Related Injuries and Illnesses for those employees to the Safety office via the COR by 15 January for the previous calendar year, even if no work related injuries or illnesses occurred.

Page2:
Reset:
2025-03-07T10:12:25-0500
MEAD.EZRA.1043260878
prep_date: 3/7/2025
app_by:
app_date:
Page:
of_pages:
app: Adobe Professional 8.0

File details come from the government source that posted it. Updated .