A07 ATTACHMENT 0057 TE 6.4 Sign Replacement Requirements.pdf
PDF 278 KB Posted
- Solicitation number
- W52P1J-21-R-5001
About this file
This document outlines requirements for a base operations support services contract on the Rock Island Arsenal in Rock Island, Illinois. The solicitation is for one base year plus four option years, with an additional six month option to extend services. Services required under the contract include grounds maintenance, pavement clearance, facility maintenance for buildings and Army family housing, pest management, hydroelectric plant operations and maintenance, bridge operations and maintenance, and unscheduled services. The solicitation was issued by the Department of the Army Materiel Command Joint Munitions Command. The response is due under solicitation number W52P1J-21-R-5001.
View the file
Other files
Show 40 more
Latest 50 of 109 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
A07 Attachment 0057 Te 6.4 Sign Replacement Requirements
A07 Attachment 0057 Te 6.4 Sign Replacement Requirements 1
TE 6.4 SIGN REPLACEMENT REQUIREMENTS
Sign Replacement Requirements
Newly installed or replaced signs shall meet the following requirements:
- All hardware shall be corrosion resistant, using nylon washers against sign face.
- Sign posts shall be square, 2”x2”x12’, 14 gauge full punched galvanized steel.
Perforated posts shall have 7-16” diameter holes on 1” centers that run the full length of the post.
- All sleeves shall be installed to a forty eight inch (48”) depth.
- Sign post anchor sleeves shall be 2.25”x2.25”x4’, 12 gauge thickness, with full punch holes, and have galvanized finish.
- In rock locations, rock shall be drilled until forty eight inch (48”) depth is obtained.
The bottom twenty-four inches (24”) of rock-drilled holes shall be grouted after sleeves are installed.
- Sign post sleeves shall protrude between 1.5 and 2.5 inches out of ground once completely installed. Material matching surrounding material shall be used to backfill hole.
- All signs installed shall bear a weatherproof installation date sticker (available from most sign manufacturers) attached to back of sign.
File details come from the government source that posted it. Updated .