A004.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

E-160

CO FLAP US50(1)

Little Blue Creek Canyon Class 3, Finish 5, soft temper prior to weaving into the mesh. Use wire with a minimum tensile strength of 60,000 psi when tested in accordance with ASTM A 370.

(b) Wire Mesh Fasteners. Furnish C-ring type fasteners composed of high tensile, galvanized wire with a wire diameter of 0.120 inches, an open diameter of 1½-inches and a closed inside dimension of 9/16-inches. Galvanize all fasteners conforming to ASTM A641 for zinc coatings, ASTM A764 for chemical and mechanical specifications; and to ASTM E8/MPT 2004 for tensile strength requirements.

(c) Wire mesh lacing wire. Furnish 9 gauge zinc coated wire conforming to ASTM A

641. If PVC coated system is selected, furnish 9 gauge PVC coated wire that matches selected color.

(d) Hardware Furnish wire rope clips that meet Federal Specification FF-C-450; wire rope thimbles that meet Federal Specification FF-T-276B; and, shackles and swivels that meet Federal Specification RR-C-271D. Provide wire rope clips, thimbles, shackles, and swivels sized for wire rope diameters of 1-inch, ¾-inch, 9/16-inch, and/or 5/16-inches. Galvanize all other hardware according to AASHTO M 232 (ASTM A153).

Repair any damaged galvanizing according to Subsection 563.08(c).

(e) Mesh Anchors. Refer to Subsection 722.03 Rock Bolts and Dowels.

(f) Wire Rope. Refer to Subsection 709.03.

Section 713. — ROADSIDE IMPROVEMENT MATERIAL

713.04 Seed. Add the following:

Apply seed mix at a rate of 20 lb. PLS per acre. Use the following seed mix:

Junegrass- 5% (PLS) Sandberg bluegrass- 14% Western wheatgrass- 10% Indian ricegrass- 11% Slender wheatgrass- 15% Blue grama- 7% Scarlet globemallow- 2% Arizona fescue- 15% Utah sweetvetch- 5% Galleta- 7% Aspen daisy- 1% Sterile Rye – 8%

713.06 Plant Material. Add the following:

(f) Willow Stakes. Harvest or furnish willow stakes conforming to the following:

Amendment A004

CENTRAL FEDERAL LANDS HIGHWAY DIVISION

12300 WEST DAKOTA AVENUE, SUITE 360

LAKEWOOD, COLORADO 80228

ATTENTION: RYAN PHILLIPS

Remove and replace page E-160 with the attached corresponding page.

*FAILURE TO ACKNOWLEDGE THIS AMENDMENT IN BLOCK 19 OF THE SF 1442 BY THE DESIGNATED DATE AND HOUR SPECIFIED IN THE SOLICITATION MAY RESULT IN REJECTION OF YOUR BID (REFER TO ITEM 11.)