ADD 1 - 02 Project Manual - 09 06 00 - SCHEDULE FOR FINISHES - Addendum 1.pdf

636a-21-701, EHRM Infrastructure Upgrades VAMC Grand Island, NE

01-01-21

09 06 00 - 1 Addendum 1

SECTION 09 06 00

SCHEDULE FOR FINISHES

PART 1 - GENERAL

1.1 DESCRIPTION

A. This section contains a coordinated system in which requirements for materials specified in other sections shown are identified by abbreviated material names and finish codes in the room finish schedule or shown for other locations.

1.2 MANUFACTURERS

A. Manufacturer’s trade names and numbers used herein are only to identify colors, finishes, textures and patterns. Products of other manufacturer’s equivalent to colors, finishes, textures and patterns of manufacturers listed that meet requirements of technical specifications will be acceptable upon approval in writing by contracting officer for finish requirements.

1.3 SUBMITTALS

A. Submit in accordance with SECTION 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES provide quadruplicate samples for color approval of materials and finishes specified in this section.

1.4 APPLICABLE PUBLICATIONS

A. Publications listed below form a part of this specification to the extent referenced. Publications are referenced in text by basic designation only.

B. MASTER PAINTING INSTITUTE: (MPI)

6/1/2019................Architectural Painting Specification Manual

09 06 00 - 2 Addendum 1

PART 2 - PRODUCTS

2.1 DIVISON 04 – MASONRY

A. Section 04 05 13, MASONRY MORTARING and Section 04 05 16, MASONRY GROUTING

Finish Code Manufacturer Mfg. Color Name

Exposed Mortar (At face brick and cast stone)

Ashgrove Match existing adjacent mortar color

Exposed Mortar (At concrete masonry units)

Ashgrove Standard Gray

B. Section 04 20 00, UNIT MASONRY

1. FACE BRICK (FB)

Finish Code Size Pattern Manufacturer Mfg. Color Name/No.

Match existing adjacent masonry units

Match existing adjacent masonry units

Match existing adjacent masonry units

Match existing adjacent masonry units

Match existing adjacent masonry units

2. CONCRETE MASONRY UNIT (CMU)

Type Size Pattern Finish Mfg. Color Name/No.

CMU Standard 8” x 16”, thickness as shown on the drawings

Running Bond Standard Standard Gray

09 06 00 - 3 Addendum 1

C. CAST STONE (04 72 00)

Size Pattern Manufacturer Mfg. Color Name/No.

See Drawings for Building 19 Running NA Match existing adjacent copings and window sills at Buildings 6 and 8

2.2 DIVISION 05 – METALS

A. SECTION 05 12 00, STRUCTURAL STEEL FRAMING

Component Finish Color

Exposed beams at Building 19 Flat P-20

B. SECTION 05 31 00, STEEL DECKING, SECTION 05 36 00, COMPOSITE METAL DECKING

Finish Color

Exposed roof deck at Building 19 P-20

C. SECTION 05 50 00, METAL FABRICATIONS

Item Finish

Steel framing at TR racks in Building 1 P-20

Loose Lintels Galvanized, prime coat, (2) coats of Interior Alkyd, Semi-Gloss, color to match color of material directly adjacent – as applies

Shelf Angles Galvanized, prime coat, (2) coats of Interior Alkyd, Semi-Gloss, color to match color of material directly adjacent – as applies

Railings and Guardrails Galvanized, prime coat, (2) coats of Interior Alkyd, Semi-Gloss, color to match color of material directly adjacent – as applies

09 06 00 - 4 Addendum 1

2.3 DIVISION 06 - WOOD, PLASTICS, AND COMPOSITES – NOT USED

2.4 DIVISION 07 - THERMAL AND MOISTURE PROTECTION

A. SECTION 07 53 23, ETHYLENE-PROPYLENE-DIENE-MONOMER (EPDM) ROOFING

Color Manufacturer Mfg. Color Name/No.

White

B. SECTION 07 60 00, FLASHING AND SHEET METAL

Item Material Finish

Hanging Gutters and Downspouts Prime coat, (2) coats of Exterior Alkyd, gloss level 1, color to match color of material directly adjacent

Aluminum

Gravel Stops

Aluminum Prime coat, (2) coats of Exterior Alkyd, gloss level 1, color to match color of material directly adjacent

C. SECTION 07 72 00, ROOF ACCESSORIES

Item Material Finish Manufacturer Manufacturer/Color Name/Number.

Roof Access Hatch Aluminum Mill Clear Anodized Aluminum

Equipment Support Galv. Steel Paint Prime coat, (2) coats of Exterior Alkyd, gloss level 1, color to match color of material directly adjacent –

Color:

09 06 00 - 5 Addendum 1

A. SECTION 07 40 00, ROOFING AND SIDING PANELS

Type Shape Ext. Finish Int. Finish Manufacturer Mfg. Color Name/No.

Roof Panel 12” Standing Seam

3-Coat Fluoropolymer

White Pac Clad To match exterior HM Doors & Frames, from Mfgr. Standard colors

Siding Panel 12” Standing Seam

3-Coat Fluoropolymer

White Pac Clad To match exterior HM Doors & Frames, from Mfgr. Standard colors

B. SECTION 07 92 00, JOINT SEALANTS

Location Color Manufacturer Manufacturer Color

Masonry Expansion Joints Match mortar

CMU Control Joints Match mortar

Cast Stone Joints Match Cast Stone

New to Existing Walls Match mortar

2.5 DIVISION 08 - OPENINGS

A. SECTION 08 11 13, HOLLOW METAL DOORS AND FRAMES

1. Paint both sides of door and frames as noted in the Room Finish Schedule. Ferrous metal louvers and hardware attached to match door.

Component Color of Paint Type and Gloss

Door Sherwin Williams DTM

Frame Paint per Room Finish Schedule see Sheet A601- ROOM

FINISH SCHEDULE

B. SECTION 08 14 00, INTERIOR WOOD DOORS

09 06 00 - 6 Addendum 1

Component Finish/Color

Doors Match Existing White Birch / Rotary Cut, Clear Finish

C. SECTION 08 56 59, SERVICE AND TELLER WINDOW UNITS

Room No. and Name Finish Glazing Manufacturer Mfg. Color Name/No.

Bldg. 1, 1-N116 Cashier

Stainless Steel- Frame and Exchange

Shelf

Clear, bullet-resistant glass, 1-1/2“ minimum thickness. See 08 80 00 Glazing

Creative Industries

Stainless Steel, Clear

D. SECTION 08 71 00, BUILDERS HARDWARE (See Door Hardware Section 08 71 00)

E. SECTION 08 80 00, GLAZING

Glazing Type Manufacturer Mfg. Color Name/No.

SG-1 Bullet-resisting Clear Tempered Glass Clad Polycarbonate Security

Glazing Unit, minimum 1-1/2” thickness

Clear

F. SECTION 08 90 00, LOUVERS AND VENTS

Item Material Finish Manufacturer Mfg. Color Name/No.

Exterior Louvers

Galvanized Steel P-19

09 06 00 - 7 Addendum 1

2.6 DIVISION 09 - FINISHES

A. SECTION 09 51 00, ACOUSTICAL CEILINGS

Finish Code Component Color Pattern Manufacturer

Basis of Design

Mfg. Name/No.

AT-1 w/ESS-1 Exposed Grid

White

White

24” x 24” x 3/4”

USG

Mars Healthcare Panels

86684 SLT Edge

AT-2 w/ESS-1 Exposed Grid

White

White

24” x 48” x 3/4”

USG

Mars Healthcare Panels

88189 Square Edge

ESS-1 Exposed Suspension System White USG DX 15/16”

B. SECTION 09 65 19, RESILIENT TILE FLOORING

Finish Code

Size Material/Component Manufacturer

Basis of Design

Mfg. Name/No.

VCT-1 12” x 12” x 1/8”

1/8” (3.2 mm) Thick Armstrong Premium Exelon Crown Texture

To be selected from full range of colors.

Color to Match:

Building 1

Ground Floor

Corridor 1-CGCOR.1

VCT-2 12” x 12” x

1/8” (3.2 mm) Thick Armstrong Premium Excelon Crown Texture

To Be Selected From Full Range Of Colors.

Color To Match:

Building 1

Ground Floor

Corridor 1-NEGCOR.1

09 06 00 - 8 Addendum 1

VCT-3 12” x 12” x

Colors.

Color To Match:

Building 1

Ground Floor

Corridor 1-NEGCOR.2

VCT-4 12” x 12” x

Colors.

Color To Match:

Building 1

First Floor

Corridor 1-N1COR.1

VCT-5 12” x 12” x

Colors.

Color To Match:

Building 1

Second Floor

Corridor 1-S2COR.1

VCT-6 12” x 12” x

1/8” (3.2 mm) Thick Armstrong Excelon Crown Texture

Colors. Match:

Building 1

Fourth Floor

Corridor 1-C4COR.3

VCT-7 12” x 12” x

1/8” (3.2 mm) Thick Armstrong Excelon Crown Texture

Colors. Match:

Building 1

09 06 00 - 9 Addendum 1

Ground Floor

Corridor 1-CGCOR.5

SD-1 24” x 24” 3.17 mm Gauge American Biltrite

Electrotile Static

Dissipative Tile

SDT-143 White Taupe

C. SECTION 09 65 16, [RESILIENT SHEET FLOORING], HEAT WELDED SEAMS (WSF)

Finish Code Pattern name Manufacturer

Basis of Design

Mfg. Color Name/No.

WSF-1

Naturelife

Size: 72” x 25yd

20 mil Heterogeneous Sheet

Shaw Contract Style No. 0002V

Color Brazilian Cherry

Color No. 05306

D. SECTION 09 65 16, [RESILIENT SHEET FLOORING], WELDING RODS (WSF)

Finish code Manufacturer

Basis of Design

Mfg. Color Name/No.

WSF-1 (Welding Rod) Shaw Contract Rod Style No. 353VS (*002V)

Wels Rod 180’ WEL 09446

E. SECTION 09 65 16, [RESILIENT SHEET FLOORING], CAP STRIPS (WSF)

Finish Code Manufacturer Mfg. Color Name/No.

Metal to match existing

09 06 00 - 10 Addendum 1

F. SECTION 09 65 13, RESILIENT BASE AND ACCESSORIES

Finish Code

Item Height Manufacturer

Basis of Design

Mfg. Name/No.

RB-1 Rubber Base (RB)

4” Coved Tarkett 31 Zephyr

RB-2 Rubber Base (RB)

6” Coved Tarkett Dark Brown B 44

RB-3 Rubber

Base (RB)

6” Coved Tarkett Black 40

RB-4 Rubber

Base (RB)

6” Coved Tarkett 31 Zephyr

RB-5 Rubber

Base (RB)

6” Coved (VERIFY HEIGHT) Tarkett Color To Be Selected from Full Range

Of Colors.

Color to Match:

Building 1, Fourth Floor

Homeless Clinic

1-C404B

RB-6 Rubber

Base (RB)

4” Coved Tarkett Color To Be Selected from Full Range

Of Colors.

Color to Match:

Building 3

Room 3-2

RB-7 Rubber

Base (RB)

4” Coved Tarkett Color To Be Selected From Full Range

Of Colors.

Color to Match:

Building 4

Room 4-2

09 06 00 - 11 Addendum 1

G. SECTION 09 68 00, CARPET TILES (CPT)

Finish Code Install Pattern Manufacturer

Basis of Design

Mfg. Color Name/No.

CPT-1 Brick Ashlar Backlit

10469 18” x 36”

Patcraft

Material Paradox

Color:

Ambient 00290

CPT-2 Brick Ashlar BT443

24” x 24”

Mohawk

First One Up II Tile

Color:

To Be Selected from Full Range Of Colors

CPT-3 Patch in Direction of Existing Carpet

24” x 24” Modular

Ethos Omnicoat Backing

Tarkett

Crayon 01957

Precious Metal 48010

1. SECTION 09 68 00, CARPET EDGE STRIP

Finish Code Material Manufacturer

Basis of Design

Mfg. Color Name/No.

Carpet to VCT Metal Provide Transition

Per Detail

Metal Trim

H. SECTION 09 72 16 VINYL-COATED FABRIC WALL COVERING

Finish Code Pattern Manufacturer

Basis of Design

Mfg. Color Name/No.

VWC-1 Twinkle

100% Vinyl

54” Wide

DESIGNTEX

To Be Selected From Full Range Of Colors

09 06 00 - 12 Addendum 1

I. SECTION 09 91 00, PAINTING

1. MPI Gloss and Sheen Standards

Gloss @60 Sheen @85

Gloss Level 1 a traditional matte finish-flat max 5 units, and max 10 units

Gloss Level 2 a high side sheen flat-“a velvet-like” max 10 units, and finish 10-35 units

Gloss Level 3 a traditional “egg-shell like” finish 10-25 units, and 10-35 units

Gloss Level 4 a “satin-like” finish 20-35 units, and min. 35 units

Gloss Level 5 a traditional semi-gloss 35-70 units

Gloss Level 6 a traditional gloss 70-85 units

Gloss level 7 a high gloss more than 85 units

2. Paint code Gloss Manufacturer

Basis of Design

Mfg. Color Name/No.

Basis of Design

P-1 Level 1

(Flat)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

SW 7007

Ceiling Bright White

P-2 Level 3

(Egg-Shell)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

Color Match Sherwin Williams SW 7036 Accessible Beige

P-3 Level 3

(Egg-Shell)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

Color Match Sherwin Williams SW 7636 Origami White

P-4 Level 7

(High Gloss)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

SW 7007

Ceiling Bright White

P-5 Level 7

(High Gloss)

PrepRite B25W25

Interior Latex Block Filler

White

P-6 Level 7

(High Gloss)

Fire Resistant Paint

White

P-7 Level 3

(Eggshell)

Scrubmaster, Scrub Tough

Water Based Polyurethane Acrylic, Rich Eggshell

Match Sherwin Williams

SW 6119 Antique White

09 06 00 - 13 Addendum 1

P-8 Level 5

(Semi-Gloss)

Sherwin Williams DTM Match Sherwin Williams

SW 6119 Antique White

P-9 Level 5

(Semi-Gloss)

Sherwin Williams DTM SW 7036

Accessible Beige

P-10 Level 3 Scrubmaster, Scrub Tough

Water Based Polyurethane Acrylic, Rich Eggshell

Match North/East Wall

Lobby 1-001

P-11 Level 3 Scrubmaster, Scrub Tough

Water Based

Polyurethane Acrylic, Rich Eggshell

Match SW 7036

Accessible Beige

P-12 Level 5

(Semi-Gloss)

Sherwin Williams DTM Match Hollow Metal Frame Paint

In Corridor 1-N1COR.1

West Wall

P-13 Level 3

(Egg-Shell)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

SW 6116

Tatami Tan

P-14 Level 3

(Egg-Shell)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

Match Walls In Building 1 Fourth Floor

Homeless Clinic 1-C404B

P-15 Level 3

(Egg-Shell)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

Match Walls In Building 3

Room 3-2

P-16 Level 5

(Semi-Gloss)

Sherwin Williams DTM Match Frames In Building 3

Room 3-2

P-17 Level 3

(Egg-Shell)

Sherwin Williams, ProMar 200, Zero VOC, Latex Paint

Match Walls In Building 4

Room 4-2

P-18 Level 5

(Semi-Gloss)

Sherwin Williams DTM Match Frames In Building 4

Room 4-2

P-19

(Exterior)

Level 5

(Semi-Gloss)

Sherwin Williams DTM SW 7067 Cityscape

To be approved by COR and Architect

09 06 00 - 14 Addendum 1

P-20 Level 5 (Semi- Gloss)

Sherwin Williams DTM Match SW7007

Ceiling Bright White

P-21 Level 3

(Egg-Shell)

Sherwin Williams

Promar 200, Zero VOC Latex Paint

Match Walls in Building 5

P-22 Level 3

(Egg-Shell)

Sherwin Williams DTM Match Frames in Building 5

3. Stain Code

(ST)

Gloss and Transparency

Manufacturer Mfg. Color Name/No.

ST-1 Stain for Doors

Match Existing Finish, to be approved by COR

2.7 DIVISION 10 - SPECIALTIES

A. SECTION 10 26 00, WALL AND DOOR PROTECTION

Code Item Material

Manufacturer

Basis of Design

Mfg. Color Name/No.

CG-1 Corner Guards G100 - 2” Vinyl Corner Guard with 1/4” radius over continuous aluminum retainer.

Provide top and bottom cap.

Install above base to 52” H. (Verify to match building standard height.)

Korogard Oyster

HR-1 Handrail HRB-10C Acrovyn 374 Mahogany With 108 Black Accent Reveal

RWC-1 Wall Guard 0.40 Thickness Wall Protection/with Standard Trim Cap and Divider bars as required where seams occur.

Korogard Oyster

09 06 00 - 15 Addendum 1

RWC-2 Wall Guard 0.40 Thickness Protec0.40 Thickness Wall Protection/with Standard Trim Cap and

Divider bars as required where seams occur.

Korogard Color To Match Existing In Adjacent Corridors

2.8 DIVISION 12 - FURNISHINGS

A. SECTION 12 36 00, WINDOWSILL

Type Manufacturer

Basis of Design

Finish/Color/Location

Solid Surface Corian S-1 White Jasmine

1-S517 Conference Room

2.9 DIVISION 22 – PLUMBING (SEE PLUMBING DRAWINGS AND SPECIFICATIONS)

2.10 DIVISON 26 – ELECTRICAL (SEE ELECTRICAL DRAWINGS AND SPECIFICATIONS)

09 06 00 - 16 Addendum 1

PART 3 - EXECUTION

3.1 FINISH SCHEDULES & MISCELLANEOUS ABBREVIATIONS

Term Abbreviation

Access Flooring AF

Accordion Folding Partition AFP

Acoustical Ceiling AT

Acoustical Ceiling, Special

Faced

AT (SP)

Acoustical Metal Pan Ceiling AMP

Acoustical Wall Panel AWP

Acoustical Wall Treatment AWT

Acoustical Wallcovering AWF

Anodized Aluminum Colored AAC

Anodized Aluminum Natural

Finish

AA

Baked On Enamel BE

Brick Face BR

Brick Flooring BF

Brick Paving BP

Carpet CP

Carpet Athletic Flooring CAF

Carpet Module Tile CPT

Ceramic Glazed Facing Brick CGFB

Ceramic Tile CT

Concrete C

Concrete Masonry Unit CMU

Divider Strips Marble DS MB

Direct To Metal DTM

Epoxy Coating EC

Epoxy Resin Flooring ERF

Existing E

Exposed Divider Strips EXP

Exterior EXT

Exterior Finish System EFS

Exterior Paint EXT-P

Exterior Stain EXT-ST

Fabric Wallcovering WF

Facing Tile SCT

Feature Strips FS

Floor Mats & Frames FM

Floor Tile, Mosaic FT

Fluorocarbon FC

Folding Panel Partition FP

Foot Grille FG

Glass Masonry Unit GUMU

Glazed Face CMU GCMU

Glazed Structural Facing Tile SFTU

Granite GT

09 06 00 - 17 Addendum 1

Gypsum Wallboard GWB

High Glazed Coating SC

Latex Mastic Flooring LM

Linear Metal Ceiling LMC

Linear Wood Ceiling LWC

Marble MB

Material MAT

Mortar M

Multi-Color Coating MC

Natural Finish NF

Paint P

Paver Tile PVT

Perforated Metal Facing (Tile or Panels)

PMF

Plaster PL

Plaster High Strength HSPL

Plaster Keene Cement KC

Plastic Laminate HPDL

Polypropylene Fabric

Wallcovering

PFW

Porcelain Paver Tile PPT

Porcelain Tile PT

Quarry Tile QT

Radiant Ceiling Panel System RCP

Resilient Stair Tread RST

Rubber Base RB

Rubber Tile Flooring RT

Spandrel Glass SLG

Stain ST

Stone Flooring SF

Structural Clay SC

Suspension Decorative Grids SDG

Terrazzo Portland Cement PCT

Terrazzo Tile TT

Terrazzo, Thin Set

Textured Gypsum Ceiling Panel TGC

Textured Metal Ceiling Panel TMC

Thin set Terrazzo TST

Veneer Plaster VP

Vinyl Base VB

Vinyl Coated Fabric

Wallcovering

W

Vinyl Composition Tile VCT

Vinyl Sheet Flooring VSF

Vinyl Sheet Flooring (Welded

Seams)

WSF

Wall Border WB

Wood WD

09 06 00 - 18 Addendum 1

--- E N D---

(This page is left blank intentionally)