Attachment 19 - Supplemental Drawings - ELE.pdf

PDF 2 MB Posted Oct 25, 2021

Attached to: Y1AZ--36C77621B0013 - Construct Administration Bldg. POD 1A (Minor) - Gainesville Federal contract opportunity
Solicitation number: 36C77621B0013
Issued by: Department of Veterans Affairs Technology Acquisition Center Austin

About this file

Written by GovTribe AI · Dec 28, 2023

This solicitation seeks a firm-fixed-price contract to construct a new 26,000 square foot administration building at the Malcom Randall VA Medical Center in Gainesville, Florida. The scope of work includes architectural, site work, structural, fire protection, HVAC, plumbing, electrical, earthwork, exterior utilities, demolition of existing structures, and all other construction services required by the contract drawings and specifications. The Department of Veterans Affairs Technology Acquisition Center Austin aims to award a single contract for design-build-construction of the project, which involves building a new administration facility adjacent to an existing CLC building and north of SW 16th Avenue.

View the file

Other files for this federal contract opportunity

Other files attached to Y1AZ--36C77621B0013 - Construct Administration Bldg. POD 1A (Minor) - Gainesville, newest first.
File	Type	Posted
36C77621B0013 0007.pdf	PDF	Nov 10, 2021
Attachment 25 - Revised Specification Booklet.pdf	PDF	Nov 3, 2021
36C77621B0013 0006.pdf	PDF	Nov 3, 2021
36C77621B0013 0005.pdf	PDF	Oct 25, 2021
Attachment 18 - Supplemental Drawings - PLB.pdf	PDF	Oct 25, 2021
Attachment 23 - Site Visit Attendance Sheet.pdf	PDF	Oct 25, 2021
Attachment 20 - Supplemental Drawings - MECH.pdf	PDF	Oct 25, 2021
Attachment 21 - Supplemental Drawings - STR.pdf	PDF	Oct 25, 2021
Attachment 24 - Building T1B Floor Layout.pdf	PDF	Oct 25, 2021
Attachment 17 - RFIs - Technical Questions and Responses.pdf	PDF	Oct 25, 2021
Attachment 22 - 573-360 VA Admin Addendum 1.pdf	PDF	Oct 25, 2021
36C77621B0013 0004.pdf	PDF	Oct 19, 2021
Attachment 14 - Asbestos Survey Report.pdf	PDF	Oct 14, 2021
Attachment 15 - Geotechnical Report.pdf	PDF	Oct 14, 2021
36C77621B0013 0003.pdf	PDF	Oct 14, 2021
Attachment 16 - Lead Survey Report.pdf	PDF	Oct 14, 2021
36C77621B0013 0002.pdf	PDF	Sep 28, 2021
36C77621B0013 0001.pdf	PDF	Sep 24, 2021
Attachment 13 - Revised Specification Section 07 41 10.pdf	PDF	Sep 24, 2021
36C77621B0013_1.pdf	PDF	Sep 15, 2021
Attachment 11 - VA Admin Submittal List.pdf	PDF	Sep 15, 2021
Attachment 05 - Drawings - 573-360 VA Admin vol 4 of 5.pdf	PDF	Sep 15, 2021
Attachment 01 - Final Completed Specifications.pdf	PDF	Sep 15, 2021
Attachment 02 - Drawings - 573-360 VA Admin vol 1 of 5.pdf	PDF	Sep 15, 2021
Attachment 03 - Drawings - 573-360 VA Admin vol 2 of 5.pdf	PDF	Sep 15, 2021
Attachment 10 - Contractor Core Work Hours.docx	DOCX document	Sep 15, 2021
Attachment 04 - Drawings - 573-360 VA Admin vol 3 of 5.pdf	PDF	Sep 15, 2021
Attachment 06 - Drawings - 573-360 VA Admin vol 5 of 5.pdf	PDF	Sep 15, 2021
Attachment 07 - Wage Rates - Alachua County - 20210194 - 09032021.pdf	PDF	Sep 15, 2021
Attachment 09 - Contractor Safety - Environmental Form.docx	DOCX document	Sep 15, 2021
Attachment 12 - Service Contract Wage Determination - 2015-4537.txt	TXT text file	Sep 15, 2021
Attachment 08 - Limitations on Subcontracting - Construction.docx	DOCX document	Sep 15, 2021

Show all 32

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

ELECTRICAL GENERAL NOTES

2. RECEPTACLES, VOICE/DATA OUTLETS, WALL FURNITURE FEEDS SHALL BE MOUNTED 18 INCHES

ABOVE FINISHED FLOOR TO CENTER LINE OF DEVICE, UNLESS OTHERWISE NOTED. ABOVE

COUNTER RECEPTACLES SHALL BE MOUNTED 6" ABOVE BACK SPLASH TO CENTERLINE OF

DEVICE, UNLESS OTHERWISE NOTED.

LIGHT SWITCHES SHALL BE MOUNTED 48 INCHES ABOVE FINISHED FLOOR TO CENTER LINE OF

DEVICE, UNLESS OTHERWISE NOTED.

EQUIPMENT SHALL BE OF MATERIALS SUITABLE FOR AND RATED FOR THE ENVIRONMENT IN WHICH THEY ARE TO BE INSTALLED. ALL COMPONENTS OF THE ELECTRICAL SYSTEM LOCATED OUTDOORS OR INDOORS WHERE EXPOSED TO SIGNIFICANT MOISTURE SHALL BE WEATHERPROOF, NEMA 3R, AS A

MINIMUM, WHETHER INDICATED ON THE CONTRACT DRAWINGS OR NOT.

WORKING CLEARANCES FOR ELECTRICAL EQUIPMENT SHALL BE IN COMPLIANCE WITH NEC.

THE EXCLUSIVELY DEDICATED SPACE EXTENDING FROM FLOOR TO 6' ABOVE EQUIPMENT OR

STRUCTURAL CEILING, WHICHEVER DISTANCE IS LOWER, WITH A WIDTH AND DEPTH OF THE

PANELBOARD OR SWITCHBOARD MUST BE CLEAR OF ALL PIPING, DUCTS, EQUIPMENT FOREIGN TO

THE ELECTRICAL EQUIPMENT OR ARCHITECTURAL APPURTENANCES IN ACCORDANCE WITH NEC.

WHEN ELECTRICAL BOXES ARE LOCATED IN VERTICAL FIRE-RESISTIVE ASSEMBLIES,

(CLASSIFIED AS FIRE/SMOKE AND SMOKE PARTITIONS), THEY SHALL BE INSTALLED WITHOUT

AFFECTING THE FIRE CLASSIFICATION. ALL OF THE FOLLOWING CONDITIONS SHALL BE MET:

A. ALL ELECTRICAL BOXES SHALL BE METALLIC.

B. BOX OPENING SHALL OCCUR ONLY ON ONE SIDE OF FRAMING SPACE.

C. BOX OPENING SHALL NOT EXCEED 16 SQUARE INCHES.

D. ALL CLEARANCES BETWEEN OUTLET BOX AND GYPSUM BOARD SHALL BE

COMPLETELY FILLED WITH JOINT COMPOUND (OR OTHER APPROVED MATERIAL).

E. PROVIDE A WALL AROUND OUTLETS LARGER THAN 16 SQUARE INCHES. THE

INTEGRITY OF THE WALL RATING SHALL BE MAINTAINED.

F. THE TOTAL AGGREGATE SURFACE AREA OF THE BOXES SHALL NOT EXCEED 100

SQUARE INCHES PER 100 SQUARE FEET.

G. OUTLET BOXES LOCATED ON OPPOSITE SIDES OF FIRE RESISTIVE ASSEMBLIES SHALL

BE SEPARATED BY A MINIMUM HORIZONTAL DISTANCE OF 24 INCHES.

H. OUTLET BOXES SHALL BE SECURELY FASTENED TO WALL FRAMING MEMBERS.

I. THE OPENING IN THE GYPSUM BOARD FACING SHALL BE CUT NOT TO EXCEED 1/8 INCH

BETWEEN THE EDGES OF THE OUTLET BOX AND THE EDGES OF THE OPENING.

ALL DEVICES SHALL BE MOUNTED VERTICALLY, UNLESS OTHERWISE NOTED.

ALL RECEPTACLES SHALL BE MOUNTED SUCH THAT THE GROUND PIN IS MOUNTED UP.

ALL WIRE SHALL BE SIZED AS SHOWN ON THE DRAWINGS. IF NO SIZE IS SHOWN, THEN WIRE SHALL BE #12 AWG, EXCEPT THAT BRANCH HOMERUNS OVER 100' IN LENGTH SHALL BE MINIMUM #10 AWG FOR 120/208 VOLT CIRCUITS, AND HOMERUNS OVER 200' IN LENGTH SHALL BE MINIMUM #10 AWG FOR 277/480 VOLT CIRCUITS. REFER TO BRANCH CIRCUIT VOLTAGE DROP TABLES BELOW. BRANCH CIRCUIT WIRING SHALL BE SIZED TO LIMIT THE VOLTAGE DROP TO 3% OF NOMINAL VOLTAGE OR

LESS.

ALL COMPONENTS OF THE ELECTRICAL SYSTEM (INCLUDE RACEWAYS, ELECTRICAL

EQUIPMENT, OUTLET BOXES, JUNCTION BOXES, ETC.) LOCATED IN A HAZARDOUS

(CLASSIFIED) LOCATION SHALL BE APPROVED FOR USE IN SAID LOCATION, AS

DEFINED BY THE NEC, WHETHER INDICATED ON THE CONTRACT DOCUMENTS OR

NOT.

PROVIDE POLYOLEFIN JET-LINE #232 (NYLON PULL STRING) IN EACH EMPTY CONDUIT WITH

ENGRAVED METAL TAG INDICATING CONDUIT DESIGNATION.

ALL CONDUCTORS IN CABINETS MUST BE CAREFULLY FORMED AND HARNESSED SO THAT EACH

CONDUCTOR DROPS OFF DIRECTLY OPPOSITE TO TERMINAL.

MINIMUM RACEWAY SIZE SHALL BE 3/4" UNLESS NOTED OTHERWISE.

COMPRESSION TYPE FITTINGS ARE ALLOWED FOR EMT CONDUIT.

ARC FLASH DANGER/WARNING LABELS SHALL BE APPLIED TO SWITCHBOARD, PANELBOARDS, AND

EQUIPMENT CONTROLLERS PER NEC.

FIRE PROTECTION PIPING SHALL NOT BE USED FOR GROUNDING.

PROVIDE TYPED PANEL DIRECTORIES FOR ALL NEW PANELBOARDS, AND EXISTING PANELBOARDS AFFECTED BY THIS PROJECT. DIRECTORIES SHALL REFLECT PROJECT AS- BUILT CONDITIONS FOR ALL BRANCH CIRCUITS. DIRECTORIES SHALL INCLUDE WHERE EACH PANEL IS FED FROM. ADDITIONALLY, EACH BRANCH CIRCUIT LOAD DESCRIPTION SHALL INCLUDE THE ROOM NUMBER(S) FOR EACH LOAD SERVICE (I.E., RECEPTACLES-RMS 501,503). ROOM NUMBERS SHALL BE BASED ON ACTUAL ROOM SIGNAGE INSTALLED IN FIELD. COORDINATE EXACT ROOM NUMBERS WITH A/E AND OWNER PRIOR TO

COMPLETION OF PANEL DIRECTORIES.

NO PVC CONDUIT MAY BE USED INSIDE OF BUILDING UNLESS ROUTED UNDERGROUND, AND UNLESS

OTHERWISE NOTED.

ALL WIRE SIZES ARE BASED ON AMPACITIES FOR 75 DEG. F TEMPERATURE RATING LISTED IN NEC.

WHERE DEVICES ARE SHOWN IN WALLS BACK-TO-BACK ON OPPOSITE SIDES, INSTALL SO THAT

THEY ARE SEPARATED BY AT LEAST 12".

VERIFY AND COORDINATE LOCATIONS OF ANY MISCELLANEOUS EQUIPMENT REQUIRING ELECTRICAL

CONNECTIONS (I.E., COPIERS, FAX MACHINES, PRINTERS, KITCHEN APPLIANCES, LAUNDRY

APPLIANCES, PROJECTION SCREENS, SHOP TOOLS, MACHINE, ELEVATORS, ETC.) WITH APPROVED

SHOP DRAWINGS, OWNER-PROVIDED CUT SHEETS, MANUFACTURER'S INSTRUCTIONS, AND

EQUIPMENT NAMEPLATE INFORMATION, PRIOR TO ROUGH IN, AND PROVIDE ALL NECESSARY

ELECTRICAL REQUIRED.

LOCATIONS OF VFD'S, DISCONNECTS, MOTOR STARTERS, ETC. FOR HVAC EQUIPMENT ARE

DIAGRAMMATIC ON THE PLAN DRAWINGS. EXACT LOCATIONS ARE TO BE COORDINATED WITH

CONTRACTOR'S COORDINATION DRAWINGS PRIOR TO ROUGHING IN TO ENSURE PROPER NEC

CLEARANCES AND APPROPRIATE MOUNTING SURFACE.

ALL CONDUITS ARE TO BE CONCEALED UNLESS IMPOSSIBLE DUE TO EXISTING CONDITIONS (I.E., EXPOSED CEILINGS, BUILDING EXTERIOR WALL RUNS). CONCEAL ALL CONDUITS ABOVE CEILINGS OR IN

WALLS AND MILLWORK. WHERE EXISTING CONDITIONS DICTATE THAT CONDUITS CANNOT BE

CONCEALED, NOTIFY ARCHITECT/ENGINEER PRIOR TO INSTALLING CONDUIT FOR RESOLUTION TO

ROUTING.

SEAL ALL PENETRATIONS AND OPENINGS MADE DURING EXECUTION OF WORK IN FIRE-RATED WALLS.

WALLS SHALL BE SEALED WITH UL-APPROVED PRODUCT WITH THE SAME OR GREATER RATING OF

WALL PENETRATED.

ALL CONDUIT TERMINATIONS AT TERMINAL BOARDS ARE TO HAVE GROUNDING BUSHINGS AT

CONDUIT ENDS.

PROVIDE A COMPLETE UL LISTED LIGHTNING PROTECTION SYSTEM WITH A MASTER LABEL FOR

THE ENTIRE FACILITY PER THE REQUIREMENTS OF NFPA 780, AND THE DIVISION 26

SPECIFICATIONS, UNLESS NOTED OTHERWISE. LIGHTNING PROTECTION SYSTEM SHALL INCLUDE

BURIED COUNTERPOISE, UNLESS NOTED OTHERWISE.

INCLUDE IN BID THE TRANSPORT AND DISPOSAL OR RECYLING OF ALL WASTE MATERIALS

GENERATED BY THIS PROJECT IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL RULES,

REGULATIONS AND GUIDELINES APPLICABLE. COMPLY FULLY WITH FLORIDA STATUTES REGARDING MERCURY-CONTAINING DEVICES, AND WITH ALL DEP AND EPA APPLICABLE GUIDELINES AT THE

TIME OF DISPOSAL. PROVIDE OWNER WITH WRITTEN CERTIFICATION OF ACCEPTED DISPOSAL.

COORDINATE RECEPTACLE LOCATIONS WITH TECHNOLOGY DRAWINGS OR OWNER'S VENDOR

DRAWINGS SO THAT A 120V 20A 5-20R RECEPTACLE IS LOCATED ADJACENT TO EACH VOICE/DATA OUTLET AND TV OUTLET INDICATED ON PLANS. RECEPTACLE IS TO BE CONNECTED TO NEAREST 120V

RECEPTACLE CIRCUIT, UNLESS OTHERWISE NOTED ON PLANS.

THE DRAWINGS AND APPLICABLE SPECIFICATIONS SHALL BE CONSIDERED SUPPLEMENTARY, ONE

TO THE OTHER AND ARE CONSIDERED THE "CONTRACT DOCUMENTS". ALL WORKMANSHIP,

METHODS AND/OR MATERIALS DESCRIBED OR IMPLIED BY ONE AND NOT DESCRIBED OR IMPLIED BY THE OTHER SHALL BE PROVIDED, FURNISHED OR PERFORMED AS IF IT HAD APPEARED IN BOTH SECTIONS. THE TERM "CONTRACT DOCUMENTS" DESCRIBED HEREIN IS NOT LIMITED SOLELY TO THE ELECTRICAL PORTION OF THE DRAWINGS AND SPECIFICATIONS, BUT ENCOMPASSES THE DRAWINGS

AND SPECIFICATIONS OF ALL DIVISIONS AS A WHOLE.

WHERE A DISCREPANCY OR CONFLICT IS FOUND BETWEEN ONE DRAWING AND ANOTHER, OR

BETWEEN A DRAWING AND APPLICABLE SPECIFICATIONS, NOTIFY THE ARCHITECT/ENGINEER

IMMEDIATELY IN WRITTEN FORM. IN GENERAL, THE MOST STRINGENT REQUIREMENT SHALL GOVERN UNLESS THE DISCREPANCY CONFLICTS WITH APPLICABLE CODES OR OWNER'S DESIGN STANDARDS, WHEREIN THE CODE OR OWNER'S DESIGN STANDARDS SHALL GOVERN.

CAREFULLY EXAMINE THOSE PORTIONS OF THE BUILDING AND/OR SITE AFFECTED BY THIS WORK PRIOR TO SUBMITTAL BID PRICE, SO AS TO BECOME FAMILIAR WITH EXISTING CONDITIONS AND DIFFICULTIES THAT MAY AFFECT EXECUTION OF THE WORK. SUBMISSION OF A BID PRICE SHALL BE CONSTRUED AS EVIDENCE THAT SUCH EXAMINATION HAS BEEN MADE. LATER CLAIMS FOR LABOR, EQUIPMENT AND/OR MATERIALS REQUIRED DUE TO DIFFICULTIES ENCOUNTERED THAT COULD HAVE

BEEN REASONABLY OBSERVED WILL NOT BE RECOGNIZED.

COORDINATE ALL PROJECT SCHEDULING AND PHASING REQUIREMENTS WITH

ARCHITECT/ENGINEER AND OWNER PRIOR TO SUBMITTING BID PRICE. THIS PROJECT MAY

REQUIRE PHASING SEQUENCES AND POTENTIAL PREMIUM TIME WORK AND ALL COSTS FOR

SUCH SHALL BE INCLUDED IN THE BID PRICE. PROVIDE ADEQUATE WORK FORCE AND

EQUIPMENT, AND INCLUDE PREMIUM TIME AS MAY BE REQUIRED IN ORDER TO ADHERE TO THE

PROJECT SCHEDULE. ADDITIONALLY, ENSURE THAT LONG LEAD ITEMS DO NOT IMPACT THE

PROJECT'S SCHEDULE OR PHASING.

ANY TEMPORARY INTERRUPTION ON POWER REQUIRED FOR THE SYSTEM TIE-IN OR SWITCHOVER

FOR ANY PORTION OF THE ELECTRICAL SYSTEM SHALL BE PRE-APPROVED IN WRITING BY THE

OWNER AND SCHEDULED IN ADVANCE.

COORDINATE EXACT REQUIREMENTS WITH THE LOCAL UTILITY COMPANIES AND PROVIDERS

(ELECTRIC, TELEPHONE, CABLE TV, ETC.) AND INCLUDE ALL COSTS FOR PROVIDING

TEMPORARY AND PERMANENT SERVICES REQUIRED FOR THIS PROJECT IN THE BID PRICE.

CONDUCT WORK OPERATIONS AND DEBRIS REMOVAL IN A MANNER THAT ENSURES MINIMUM

INTERFERENCE WITH NORMAL BUSINESS OPERATIONS, TRAFFIC, PARKING, ETC. ONGOING IN

ADJACENT OCCUPIED SPACES OR FACILITIES. PROVIDE ALL THAT IS REQUIRED TO EFFECTIVELY PROTECT SURROUNDING OCCUPANTS, EQUIPMENT, FINISHES, FURNITURE, ETC. FROM DAMAGE OR EXCESSIVE NOISE THROUGHOUT THE DURATION OF THIS PROJECT. CONTRACTOR IS RESPONSIBLE FOR ANY LOSSES OR DAMAGE. ANY DAMAGE RESULTING FROM THE FAILURE TO ADHERE TO THIS

REQUIREMENT. RESTORE DAMAGED ELEMENTS TO ORIGINAL CONDITION BY THE CONTRACTOR TO

THE SATISFACTION OF THE ARCHITECT/ENGINEER AND OWNER, AT NO ADDITIONAL COSTS. REPORT

OF ANY SUCH OCCURRENCE TO THE ARCHITECT/ENGINEER AND OWNER IMMEDIATELY AND AWAIT

WRITTEN DIRECTION PRIOR TO PROCEEDING WITH REPAIRS.

INCLUDE ALL COSTS FOR EXCAVATION, SAW CUTTING, DIRECTIONAL BORING, CORE DRILLING, BACKFILLING, SURFACE RESTORATION, REPAIR OF FINISHES, ETC. THAT IS REQUIRED IN

ORDER TO MEET THE PROJECT REQUIREMENTS.

LOCATE, IDENTIFY, PROTECT AND DOCUMENT ALL UTILITY LINES LOCATED WITHIN THE

PROJECT BOUNDARY. FOR LOCATING SITE UTILITIES, CONTACT SUNSHINE STATE ONE CALL OF

FLORIDA, INC. AT LEAST 48 HOURS IN ADVANCE PRIOR TO DIGGING, AT 1-800-432-4770.

VERIFY AND COORDINATE LOCATIONS AND EXACT ELECTRICAL REQUIREMENTS FOR ALL MECHANICAL, PLUMBING AND FIRE PROTECTION EQUIPMENT PRIOR TO SUBMITTAL OF SHOP DRAWINGS OF

ELECTRICAL EQUIPMENT. PROVIDE ALL NECESSARY RACEWAYS, CONDUCTORS, BOXES, EQUIPMENT, ACCESSORIES, ASSOCIATED DISCONNECT SWITCHES, CIRCUIT BREAKERS, CONTROL TRANSFORMERS, FIRE ALARM SHUTDOWN, ETC. REQUIRED FOR A COMPLETE AND OPERATIONAL SYSTEM. COORDINATE WITH APPROPRIATE TRADE'S APPROVED SHOP DRAWINGS, MANUFACTURER'S INSTRUCTIONS, AND

EQUIPMENT NAMEPLATE INFORMATION, PRIOR TO ROUGH IN, AND PROVIDE ALL NECESSARY

ELECTRICAL REQUIRED, UNLESS OTHERWISE NOTED.

PROVIDE ALL PENETRATIONS THROUGH FLOORS, WALL, CEILINGS AND ROOFS WHERE

REQUIRED. COORDIANTE LOCATIONS AND SIZES WITH ARCHITECTURAL AND STRUCTURAL

DRAWINGS, FIELD CONDITIONS AND WORK OF ALL OTHER DIVISIONS/TRADES. ALL OPENINGS

ARE TO BE SEALED WATERTIGHT.

THE USE OF ELECTRICAL NON-METALLIC TUBING (ENT) AND LIQUIDTIGHT FLEXIBLE NON-METALLIC CONDUIT (LFNC) ARE PROHIBITED UNLESS SPECIFICALLY NOTED OTHERWISE, OR UNLESS A/E OR

OWNER GRANTS WRITTEN PERMISSION.

ALL WORK ON THE ELECTRICAL SYSTEM REQUIRED BY THE CONTRACT DOCUMENTS SHALL BE

COORDINATED WITH THE WORK OF ALL OTHER DIVISIONS/TRADES PRIOR TO COMMENCEMENT OF

WORK. AVOID INTERFERENCES WITH THE PROGRESS OF OTHER DIVISIONS/TRADES.

THE USE OF ALUMINUM CONDUCTORS, RACEWAYS, BOXES, BUSSING, WINDINGS, ETC. ARE

PROHIBITED. ALL MATERIALS SHALL BE COPPER, UNLESS SPECIFICALLY NOTED OTHERWISE OR

UNLESS A/E OR OWNER GRANTS WRITTEN PERMISSION.

ALL CONDUCTORS SHALL BE COPPER, THHN/THWN , AND SOLID FOR #10 AWG AND SMALLER, AND

STRANDED FOR #8 AWG AND LARGER.

CONNECTIONS TO TRANSFORMERS, AHU'S, AND PUMPS SHALL BE WITH LIGUIDTIGHT, FLEXIBLE METAL

CONDUIT.

ALL FEEDER AND BRANCH CIRCUIT CONDUCTORS, INCLUDING LOW VOLTAGE SYSTEMS, SHALL BE INSTALLED IN A COMPLETE RACEWAY SYSTEM (CONDUIT) UNLESS SPECIFIED NOTED OTHERWISE.

ALL FEEDERS AND BRANCH CIRCUITS SHALL INCLUDE AN EQUIPMENT GROUND CONDUCTOR. METAL

RACEWAYS SHALL NOT BE USED AS EQUIPMENT GROUND.

ALL RACEWAYS THAT TURN UP INTO THE SLAB OR ELECTRICAL EQUIPMENT FROM UNDERGROUND

SHALL BE RIGID GALVANIZED STEEL (RGS) WITH BITUMASTIC COATING FOR AT LEAST THE FINAL 18" IN

LENGTH. THE USE OF NON-METALLIC CONDUIT ABOVE GRADE IS PROHIBITED.

FLEXIBLE METAL CONDUIT AND LIQUIDTIGHT METAL CONDUIT (FMC & LFMC) SHALL NOT BE USED IN LENGTHS THAT EXCEED 6'-0" UNLESS SPECIFICALLY NOTED OTHERWISE, OR UNLESS A/E GRANTS

WRITTEN PERMISSION.

PANEL SCHEDULES AND FLOOR PLANS MAY INDICATE DEDICATED HOMERUNS FOR EACH BRANCH

CIRCUIT. BRANCH CIRCUITS MAY BE GROUPED IN A COMMON HOMERUN WHERE THE HOMERUN DOES

NOT EXCEED 3 PHASE CONDUCTORS, 3 NEUTRAL CONDUCTORS, AND 1 EQUIPMENT GROUND. THE

HOMERUN RACEWAY SIZE AND CONDUCTOR SIZE SHALL BE INCREASED AS NECESSARY TO COMPLY

WITH THE NEC FOR 40% MAXIMUM FILL AND DERATING REQUIREMENTS.

WHERE A PHASE CONDUCTOR IS INCREASED IN SIZE DUE TO VOLTAGE DROP, THE EQUIPMENT

GROUND CONDUCTOR SHALL BE INCREASED IN SIZE PROPORTIONATELY.

PROVIDE ENGRAVED PLASTIC LAMINATE NAME TAGS ON EACH SWITCHBOARD, SWITCHGEAR,

DISTRIBUTION PANEL, PANELBOARD, MOTOR CONTROL CENTER, SAFETY SWITCH, ENCLOSED CIRCUIT BREAKER, CABINET, STEP-DOWN TRANSFORMER, TRANSFER SWITCH, ETC., AND ANY OTHER MAJOR

COMPONENT OF THE ELECTRICAL SYSTEM.

PROVIDE ENGRAVED PLASTIC LAMINATE NAME TAGS FOR EACH DISTRIBUTION BREAKER OR BRANCH

CIRCUIT BREAKER IN SWITCHGEAR, SWITCHBOARDS, MOTOR CONTROL CENTERS AND OTHER

DISTRIBUTION EQUIPMENT. NAME TAG SHALL INCLUDE LOAD DESCRIPTION AND ROOM NUMBER FOR

EACH LOAD SERVICE.

IT IS THE INTENT THAT ALL DEVICE OUTLET BOXES (POWER AND SYSTEMS) BE FLUSH MOUNTED IN WALLS, CEILINGS OR FLOORS, AND JUNCTION BOXES FLUSH MOUNTED IN WALLS, CEILINGS, OR

FLOORS, OR CONCEALED ABOVE ACCESSIBLE CEILINGS, AND NOT SURFACE MOUNTED, UNLESS

SPECIFICALLY NOTED ON THE CONTRACT DRAWINGS, OR UNLESS A/E GRANTS WRITTEN PERMISSION.

PROVIDE A REINFORCED CONCRETE PAD, SIZED 4" LARGER IN ALL DIRECTIONS THAN THE

FOOTPRINT OF THE EQUIPMENT, AND 4" HIGH, FOR ALL FREESTANDING, FLOOR-MOUNTED

ELECTRICAL EQUIPMENT. PROVIDE VIBRATION ISOLATORS AND/OR ANCHORS PER MANUFACTURER'S

INSTRUCTIONS.

REFER TO ARCHITECTURAL, MECHANICAL, PLUMBING, FIRE PROTECTION, CIVIL, LANDSCAPE, INTERIOR

DESIGN, TECHNOLOGY, STRUCTURAL, AND KITCHEN EQUIPMENT DRAWINGS FOR RELATED

INFORMATION AND ADDITIONAL INSTALLATION REQUIREMENTS TO BE PERFORMED AS PART OF THE

WORK.

THIS PROJECT REQUIRES COORDINATION DRAWINGS BY THE CONTRACTOR. PARTICIPATE IN THE

COORDINATION DRAWING PREPARATION PROCESS AND PROVIDE ALL NECESSARY INFORMATION

REQUIRED TO COORDINATE ALL TRADE INFORMATION.

GENERAL:

ELECTRICAL DEVICES, OUTLET BOXES, JUNCTION BOXES:

IDENTIFICATION:

CONDUCTORS:

RACEWAYS:

COORDINATION:

GROUNDING:

PROVIDE A GROUND BUS BAR IN EACH ELECTRICAL ROOM AND TELECOMMUNICATIONS / IDF/ MDF ROOM FOR ALL NEW CONSTRUCTION AND NEW ROOMS IN EXISTING CONSTRUCTION, AND IN EXISTING

CONSTRUCTION WHERE THERE IS NONE INSTALLED WITHIN AN EXISTING ROOM.

TERMINATION PROVISIONS FOR ALL ELECTRICAL EQUIPMENT (PANELBOARDS, SWITCHBOARD,

TRANSFORMERS, DISCONNECT SWITCHES, MOTOR CONTROLLERS, AUTOMATIC TRANSFER SWITCHES, ENCLOSED CIRCUIT BREAKERS, WIREWAYS, ETC.) SHALL BE LISTED AND IDENTIFIED FOR USE WITH

MINIMUM 75 DEG. F CONDUCTORS IN ACCORDANCE WITH NEC.

IT IS THE INTENT THAT ALL RACEWAYS BE CONCEALED IN WALLS, ABOVE CEILINGS, IN SLAB, OR

BELOW SLAB UNLESS SPECIFICALLY NOTED OTHERWISE, OR UNLESS A/E GRANTS WRITTEN

PERMISSION. WHERE RACEWAYS ARE INSTALLED IN SLABS, THE MINIMUM SPACING, MAXIMUM

RACEWAY SIZE, AND ANY OTHER STRUCTURAL LIMITATIONS SHALL BE COORDINATED WITH THE

STRUCTURAL DRAWINGS AND THE STRUCTURAL ENGINEER PRIOR TO INSTALLATION.

ELECTRICAL EQUIPMENT:

PROVIDE LABELS ON THE INSIDE OF EACH DEVICE COVERPLATE, IDENTIFYING THE PANEL(S)/ CIRCUIT

NUMBER(S) DEVICE IS CONNECTED TO.

PROVIDE NEATLY, HANDWRITTEN IDENTIFICATION ON THE EXTERIOR COVER OF ALL JUNCTION

BOXES, PULLBOXES AND WIREWAYS, IDENTIFYING THE PANEL(S)/ CIRCUIT NUMBER(S) CONTAINED

WITHIN.

10.

11.

12.

13.

COORDINATE THE LOCATION OF ALL LIGHT FIXTURES, DEVICES AND BOXES WITH WINDOWS,

MIRRORS, MILLWORK, CABINETS, GLASS CURTAIN WALLS, AND GLASS WALLS PRIOR TO

INSTALLATION OF CONDUITS OR BOXES. REVIEW ALL CONTRACT DRAWINGS TO ASCERTAIN ANY

CONFLICTS PRIOR TO BIDDING. OBTAIN CLARIFICATION FROM A/E PRIOR TO BID. CONTRACTOR

SHALL NOT BE ENTITLED TO ADDITIONAL COMPENSATION FOR WORK REQUIRED TO RELOCATE

OUTLET BOXES OR RACEWAYS FOR COORDINATION WITH OTHER TRADE'S WORK.

BRANCH CIRCUITS SHALL BE INCREASED IN SIZE AS REQUIRED TO COMPENSATE FOR VOLTAGE DROP FROM LENGTH OF CIRCUIT DUE TO FIELD ROUTING. FINAL INSTALLATION SHALL NOT EXCEED A MAXIMUM OF 3% VOLTAGE DROP FOR BRANCH CIRCUITS. REFER TO VOLTAGE DROP TABLE BELOW

FOR CONDUCTOR SIZES FOR BRANCH CIRCUITS:

120V (BASED ON 1500W LOAD) MIN. CONDUCTOR SIZE

CIRCUIT LENGTH INCREASE FOR VOLTAGE DROP

0 FT - 70 FT #12 AWG

71 FT - 115 FT #10 AWG

116 FT - 180 FT #8 AWG

181 FEET AND LONGER: SUBMIT WIRE SIZE TO ENGINEER OF RECORD FOR WRITTEN APPROVAL.

277V (BASED ON 4155W LOAD) MIN. CONDUCTOR SIZE

CIRCUIT LENGTH INCREASE FOR VOLTAGE DROP

0 FT - 140 FT #12 AWG

141 FT - 220 FT #10 AWG

221 FT - 350 FT #8 AWG

PROVIDE A PERMANENT SIGN ON THE MAIN ELECTRICAL ROOM DOOR TO THE BUILDING STATING

THAT THE MAIN SERVICE DISCONNECTING MEANS IS LOCATED INSIDE.

RECEPTACLES OR JUNCTION BOXES FOR ELECTRIC WATER COOLERS SHALL BE LOCATED

DIRECTLY BEHIND ELECTRIC WATER COOLER, CONCEALED FROM DIRECT VIEW. RECEPTACLES

SHALL BE GFCI TYPE. JUNCTION BOXES FOR HARD-WIRED CONNECTION TO EWC SHALL BE

CIRCUITED TO GFCI PROTECTED CIRCUIT BREAKER IN PANELBOARD.

PROVIDE HACR RATED CIRCUIT BREAKER FOR ALL HVAC EQUIPMENT.6.

9. CONTRACTOR IS TO SUBMIT FOR APPROVAL TO THE ENGINEER OF RECORD FINAL COORDINATED

SETTINGS REQUIRED FOR MAIN CIRCUIT BREAKER AND ALL DOWNSTREAM ADJUSTABLE

OVERCURRENT PROTECTIVE DEVICES, BASED ON SELECTED EQUIPMENT MANUFACTURER.

PROVIDE A PERMANENT LABEL ON ALL PANELBOARDS, SWITCHBOARDS, SWITCHGEAR, MOTOR

CONTROLS CENTERS AND DISTRIBUTION PANELS STATING "DO NOT WORK ON EQUIPMENT WHILE

ENERGIZED. LOCK-OUT TAG-OUT REQUIRED".

8. ALL EXTERIOR RECEPTACLES OR RECEPTACLES LOCATED IN AREAS SUBJECT TO MOISTURE

(PARKING GARAGE, WASHDOWN AREAS IN KITCHEN, ETC) SHALL BE GFCI TYPE. ALL EXTERIOR

RECEPTACLES SHALL BE PROVIDED WITH CAST METAL, IN-USE COVER UNLESS NOTED

OTHERWISE.

ALL PANELBOARDS OR DISCONNECT SWITCHES LOCATED IN KITCHEN AREAS SHALL BE STAINLESS STEEL (COVER AND DOOR WHERE PANEL IS FLUSH MOUNTED, PANEL BOX, COVER & DOOR WHERE

SURFACE MOUNTED).

9. ALL RECEPTACLES LOCATED IN KITCHENS, BATHROOMS OR WITHIN 6' OF THE INSIDE FACE OF A

SINK, IN MECHANICAL ROOMS, JANITOR CLOSETS, ELEVATOR SHAFTS, ELEVATOR SUMP PUMP,

AND ELEVATOR EQUIPMENT ROOMS SHALL BE GFCI TYPE OR GFCI PROTECTED.

10.

11.

12.

13.

14.

15.

16.

PROVIDE SEAL OFF FITTINGS, APPROVED FOR SUCH USE, WHERE RACEWAYS PENETRATE

BETWEEN A DRY, CONDITIONED ENVIRONMENT AND THE EXTERIOR OR WET ENVIRONMENTS SUCH

AS WALK-IN COOLERS OR FREEZERS, KITCHEN WASH-DOWN AREAS, ETC.

PROVIDE SURGE PROTECTION DEVICE FOR ALL MAIN SERVICE EQUIPMENT, PANELBOARDS SERVING SENSITIVE ELECTRONIC EQUIPMENT (DATA RACKS) OR COMPUTERS, LIGHTING PANELS SERVING EXTERIOR LIGHTING, POWER CIRCUITS OR LOW VOLTAGE (FIRE ALARM, TELECOMMUNICATIONS)

EXITING THE BUILDING. PROVIDE MINIMUM 30A/3P BREAKER IN PANELBOARDS AND 60A/3P

DISTRIBUTION PANEL OR SWITCHBOARD, UNLESS OTHERWISE NOTED, OR PER THE SPD

MANUFACTURER'S RECOMMENDATIONS FOR SURGE PROTECTION DEVICE.

WHERE THERE IS A DISCREPANCY BETWEEN ABOVE GENERAL NOTES AND SPECIFICATIONS, WHERE APPLICABLE, SPECIFICATIONS SHALL BE FOLLOWED

PROVIDE REQUIRED IDENTIFICATION PER ANSI STANDARDS, NEC REQUIREMENTS, AND OWNER'S

PUBLISHED DESIGN STANDARDS WHERE APPLICABLE.

ALL WORK AND EQUIPMENT UNDER THIS DIVISION SHALL BE IN STRICT COMPLIANCE WITH THE CODES, STANDARDS AND PRACTICES LISTED HEREIN:

A. LIFE SAFETY CODE, NFPA 101.

B. UNDERWRITERS LABORATORIES, INC. (UL) PUBLICATIONS.

C. NATIONAL FIRE PROTECTION ASSOCIATION (NFPA).

D. AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI).

E. NATIONAL ELECTRICAL CODE (NEC), 2017 EDITION.

F. INSTITUTE OF ELECTRICAL AND ELECTRONIC ENGINEERS (IEEE).

G. NATIONAL ELECTRICAL MANUFACTURER'S ASSOCIATION (NEMA).

H. REQUIREMENTS OF LOCAL POWER COMPANY.

I. THE AMERICANS WITH DISABILITIES ACT (ADA).

J. VA DESIGN GUIDES.

APPLICABLE CODES

10. ALL RECEPTACLES SHALL BE HOSPITAL GRADE RECEPTACLES.

COORDINATE EXACT LOCATIONS OF LIGHT FIXTURES IN LAY-IN AND GYPBOARD CEILINGS WITH ARCHITECTURAL REFLECTED CEILING PLANS, AND WALL MOUNTED EXTERIOR AND INTERIOR LIGHT FIXTURES WITH ARCHITECTURAL ELEVATIONS PRIOR TO INSTALLATION. WHERE THE QUANTITY OF

LIGHTS DIFFERS BETWEEN THE ARCHITECTURAL RCP AND THE ELECTRICAL LIGHTING PLANS,

PROVIDE THE HIGHEST QUANTITY OF FIXTURES IN THE BID PRICE. THE DISCREPANCY IN QUANTITY SHALL BE BROUGHT TO THE ATTENTION OF THE A/E. THE HIGHEST QUANTITY SHALL BE CIRCUITED

TO THE LOCAL ROOM OR AREA LIGHTING CIRCUITS AND LIGHTING CONTROL DEVICES, UNLESS

OTHERWISE DIRECTED IN WRITING BY THE ARCHITECT/ENGINEER.

LIGHTING:

VERIFY ACTUAL CEILING CONSTRUCTION TYPE AS DEFINED ON THE ARCHITECTURAL DRAWINGS AND

FURNISH ALL LIGHT FIXTURES WITH THE CORRECT MOUNTING DEVICES WHETHER OR NOT SUCH

VARIATIONS ARE INDICATED BY THE LIGHT FIXTURE CATALOG NUMBER. VERIFY THE DEPTH OF ALL

RECESSED LIGHT FIXTURES WITH THE ARCHITECTURAL DRAWINGS PRIOR TO ORDERING LIGHT

FIXTURES. ANY DISCREPANCIES THAT WOULD CAUSE THE RECESSED LIGHT FIXTURES NOT TO FIT INTO CEILING SHALL BE REPORTED TO ARCHITECT/ENGINEER PRIOR TO ORDERING LIGHT FIXTURES.

3. LIGHT FIXTURES RECESSED IN FIRE-RATED CEILINGS SHALL BE PROVIDED WITH APPROVED FIRE- RATED ENCLOSURE WITH A FIRE RATING EQUAL TO THAT OF THE CEILING. PROVIDE A MINIMUM OF

3" CLEARANCE FROM SIDES AND TOP OF RECESSED LIGHT FIXTURES.

EACH LIGHTING CIRCUIT SHALL BE PROVIDED WITH A DEDICATED NEUTRAL.

MODIFY ALL LIGHT FIXTURE CATALOG NUMBERS AS REQUIRED TO COORDINATE WITH THE

LIGHTING BRANCH CIRCUIT VOLTAGES INDICATED. COORDINATE THE CATALOG NUMBERS WITH

THE EXACT FIXTURE MOUNTING AND TRIM REQUIRED BY THE CEILING IN WHICH EACH FIXTURE IS

BEING INSTALLED.

ALL LIGHT FIXTURES SHALL BE PROVIDED COMPLETE WITH LAMPS, UNLESS OTHERWISE NOTED.

ALL EXIT LIGHTS, LIGHT FIXTURES INDICATED WITH UNSWITCHED CIRCUIT (NIGHTLIGHT N/L), EMERGENCY TWIN-HEAD FIXTURES WITH INTEGRAL BATTERY PACKS, AND BATTERY PACKS INTEGRAL TO LIGHT FIXTURES, SHALL BE WIRED AHEAD OF ANY LOCAL SWITCHING OR LIGHTING CONTROLS.

PROVIDE UL WET LABEL OR IP67 RATED LIGHT FIXTURES FOR ALL FIXTURES LOCATED OUTSIDE OR IN

PARKING GARAGES, IN SHOWERS, OR OPEN STRUCTURES.

PROVIDE 0-DEGREE BALLASTS FOR EXTERIOR FLUORESCENT OR HID LIGHT FIXTURES.

PROVIDE FUSING FOR ALL EXTERIOR LIGHT FIXTURES, OR FIXTURES IN PARKING GARAGES OR OPEN

STRUCTURES.

PROVIDE ALL TEMPORARY NORMAL LIGHTING, EMERGENCY LIGHTING AND EXIT SIGNAGE

REQUIRED DURING THE PROJECT CONSTRUCTION PHASE.

COORDINATE EXACT FOUNDATION AND/OR COMPACTING REQUIREMENTS FOR ALL POLE MOUNTED

LIGHT FIXTURES WITH MANUFACTURER'S AND/OR INSTALLER'S STRUCTURAL ENGINEER. POLE

BASES SHALL MEET OR EXCEED ALL WIND LOAD RATINGS, GUST FACTORS, IMPORTANCE FACTORS, ETC. REQUIRED BY NATIONAL AND/OR LOCAL CODES. SHOP DRAWINGS SHALL INCLUDES

STRUCTURAL DRAWINGS FOR ALL POLE BASES, POLE, ASSEMBLY AND OVERTURN CALCULATIONS

REQUIRED IN THIS PROJECT, SIGNED AND SEALED BY A PROFESSIONAL STRUCTURAL ENGINEER

REGISTERED IN THE PROJECT STATE.

10.

11.

13.

WHERE THERE IS NO EMERGENCY GENERATOR/ LIFE SAFETY DISTRIBUTION BRANCH AVAILABLE, PROVIDE INTEGRAL BATTERY PACKS, RATED FOR A MINIMUM OF 90 MINUTES, FOR FIXTURES

SHOWN WITH SOLID SHADING AND/OR WITH "E" AFTER FIXTURE TAG, AND FOR ALL EXIT LIGHTS, OR

UNLESS OTHERWISE NOTED.

14.

REFER TO LIGHT FIXTURE SCHEDULE FOR LIGHT FIXTURE TYPES, DESCRIPTIONS, CATALOG

NUMBERS AND ADDITIONAL INFORMATION PERTINENT TO THE LIGHT FIXTURE OR INSTALLATION

THEREOF.

15. COORDINATE LIGHT FIXTURE TRIM TYPE AND FINISH COLOR WITH ARCHITECT PRIOR TO ORDERING.

12.

DISTRIBUTED ANTENNA SYSTEMS (DAS) SHALL BE A DELEGATED DESIGN AND INSTALLATION OF A PUBLIC SAFETY SYSTEMS BOOSTING THE 700MHZ & 800MHZ SIGNALS WHERE THEY ARE DEFICIENT

IN THE BUILDING. THIS SHALL INCLUDE ALL COMMISSIONING AND TESTING OF SYSTEM IN

ACCORDANCE WITH THESE PLANS AND THE APPLICABLE SPECIFICATION SECTIONS. SYSTEM SHALL

SUPPORT FREQUENCIES 851-860MHZ (800MHZ), AND THE 700MHZ (OR OTHER) FREQUENCIES

PROVIDED BY THE AHJ.

DAS SYSTEMS SHALL MEET NFPA 72 REQUIREMENTS, AS WELL AS LOCAL/STATE/NATIONAL CODES, INCLUDING THE LATEST EDITION OF THE INTERNATIONAL FIRE CODE. DAS SYSTEM ALARMS SHALL

REPORT TO THE FIRE ALARM CONTROL PANEL.

DAS SYSTEM RISER SHALL BE DESIGNED TO A LEVEL 2 SURVIVABILITY PATHWAY FOR CABLE AND ALL ROOMS CONTAINING EQUIPMENT SHALL BE 2-HOUR RATED. ALL CALE LOCATED OUTSIDE OF

THE 2-HOUR RATED CHASE OR FIRE RATED ROOMS SHALL BE INSTALLED IN METAL RACEWAY

(MINIMUM IMC), EACH RACEWAY SHALL HAVE A MINMUM BEND RADIUS OF 12-INCHES. ALL SPACES

CONTAINING DAS EQUIPMENT SHALL BE 2-HOUR FIRE RATED ROOMS. RACEWAYS LOCATED

OUTSIDE OF 2-HOUR FIRE RATING SHALL BE DESIGNED TO A LEVEL 1 SURVIVABILITY. PULLBOXES SHALL BE PROVIDED BY ELECTRICAL CONTRACTOR TO LIMIT PULLING TENSION AND BEND RADIUS

FACTOR ON CABLES.

RADIO EQUIPMENT SHALL BE FCC COMPLIANT.

EXTERIOR ANTENNAS SHALL BE HIGH GAIN, VERTICALLY POLARIZED AND PERFORM IN THE

OPERATING FREQUENCIES.

DISTRIBUTED ANTENNA SYSTEM NOTES:

K. INTERNATIONAL BUILDING CODE, 2018 EDITION.

Drawing Title

Approved: Project Director

Project Title

Date

Location

Checked

Building Number

Project Number

Drawing Number

Drawn

Dwg. of

CONSULTANTS: ARCHITECT/ENGINEERS: Office of Construction and Facilities Management

7370 Cabot Court, Ste. 103 Melbourne, FL 32940

COA #15 TLC NO:

Phone: 321-636-0274

Fax: 321-639-8986 www.tlc-engineers.com

P.O. Box 1296, Winter Park, FL 32790 Tel 407.467.8833 - Fax 407.926.0701 o n e e ig h t h i n c h o n e f o o t 16 t h r e e i n c h e s o n e f o o t o n e a n d o n e h a l f i n c h e s o n e f o o t o n e i n c h o n e f o o t t h r e e q u a r t e r s i n c h o n e f o o t o n e h a l f i n c h o n e f o o t t h r e e e ig h t h s i n c h o n e f o o t o n e q u a r t e r i n c h o n e f o o t

VA FORM 08−6231

1 2 3 4 5 6 87 9

MALCOM RANDAL VA HOSPITAL

ADMINISTRATION BUILDING

VAWPBMC PLANNING AND ENGINEERING

IF THIS DRAWING IS LESS THAN 30" X

42" IT IS A REDUCED SIZE DRAWING

CONSTRUCTION DOCUMENTS

FLGAINESVILLE

BLDG #

573-360

AMHMMH

ELECTRICAL GENERAL NOTES

518056 06/18/2021

M. MONCEF HADIJI, P.E.

Florida License #48022

06/18/2021

E-002 # Revisions: Date:

1 ADDENDUM 1 10/19/21

LV LV

L V

OSOS

OS OS

OSDS

OSOS

L C

OS OS

L V

L C

LVg

D D D D D

OSOSOSOS

OS OS

D D D D

OS OS OS

OSOS OS

LV LV

OS OS

OSOS

OS OS

L C

OS LV

O S

OS OS

LVg

D D D D

D D D D D

OS OS OS OS

OSOSOSOS

C2E

J2E

C2E C2 C2E

D1 D1 D1E

A B C D E

LOBBY

1-100

OFFICE

1-101

MECHANICAL

1-102

CORRIDOR

1-103

WOMEN

1-104

MEN

1-105

HAC ROOM

1-106

PUMP ROOM

1-107

STAIR B

1-108

BREAK ROOM

1-110

WOMEN

1-112

MEN

1-113

TELE/COM

1-115

VESTIBULE

1-114

STAIR A

1-118

RECEIVING

1-117

CORRIDOR

1-116

ELECTRICAL ROOM

1-109

0.9

C2 C2

C2C2EC2C2C2C2E

C2C2

C2E C2 C2 C2 C2

C2 C2

C3E

J2E

J2EJ2

J2J2E

J2EJ2

D1E

D1E D1

D1D1

D1D1E

D1E

J2 J2

J2E J2E

X2 X1

W1W1

J3E J3 J3 J3 J3 J3

AFF

BELOW

WINDOW

BELOW

WINDOW

J2E

AFF

J2 W3W3

1H1-51H1-5

C2E

1H1-10

1H1-2

1H1-10

1H1-1

1H1-10

1H1-2

1H 1-

1H1-10

1H1-2

1H1-10

1H1-2

1H 1-

1H1-10

1H1-2

1H1-10

1H1-2

1H1-2 1H1-5

1H1-5

1H1-5 1H1-5

1H1-5

1H1-3 1H1-3

1H1-1

1H1-1 1H1-1 1H1-1

1H1-1

1H1-1 1H1-1

1H1-11H1-11H1-11H1-11H1-11H1-1

1H1-11H1-1

1H1-1 1H1-1 1H1-1

1H1-1 1H1-1

1H1-1

1H1-1 1H1-1

1H1-1

1H1-6

1H1-13 1H1-13 1H1-13 1H1-13 1H1-13 1H1-13

1H1-71H1-7

1H1-2

W1W1

1H1-9

1H1-9 1H1-81H1-8

1H1-81H1-8

1H1-9

1H1-91H1-9

1H1-9

1H1-91H1-9

1H1-10 1H1-9 1H1-9 1H1-9

1H1-9

1H1-11

1H1-9

1H1-91H1-9

1H1-9

1H1-12

W2E

W2E 1H1-14

1H1-14

W2 f f f f ff f d c a bbb b c c c a a c h h h h h h e e e e e e e e

1H1-4

J2E

1H1-3

1H1-4

1H1-1 C2 ddddd d d d d ddddd

1H1-2

1H1-2 c c c cccc c c c cccc

1H1-2

C2 C2

1H1-2

1H1-2 1H1-2

1H1-10 1H1-10

C2 b b bbbbb b b bb b b b b b bbbb

1H1-10

C2 aa a a a a a a aaa a a a a a

C2 C2

1H1-10 1H1-10

1H1-10 a,b a,b a,b,c a,b,c b,c,d b,c,d c,d c,d

1H1-10 h f f f

1H1-2

1H1-2 1H1-2

1H1-2

C3 C3

C3E

J2E J2

J2E

1H1-7

1H1-7 1H1-7

1H1-7

J2 b g g g g g g g1 f

1H1-5 1H1-5 D1E D1E

W1W1 1H1-91H1-9

D A

G H

T Z

O N

DAYLIGHT ZONE

1H1-13

2 2 2 2 2 2 2

1H1-14

2J3

1H1-14

2J3

1H1-14

W5 W5 W5 1H1-13 1H1-13 1H1-13

1H1-1

1H1-1 X1 g g

a,b b,c,d c,d f

1H1-7

C2 C2 C2 C2 C2

J2 1H1-9

1H1-10 1H1-10 1H1-10 1H1-10

1H 1-e 1H1-2

X1 e e e h

C2 1H1-1 C2 1H1-1 1H1-1C2

C2 1H1-1

1H1-7

1H1-2

1H1-5

1H1-2

1H1-10

1H1-14 W2

A B C D E

MEETING ROOM

2-100

OFFICE

2-101

STAIR B

2-108

WOMEN

2-104 ELEC ROOM

2-107

OIT IT

2-115

WOMEN

2-112 MEN

2-113

VESTIBULE

2-114

CORRIDOR

2-116

STAIR A

2-118

MEN

2-105

BREAK/COPY

2-117

TRAINING

2-110

0.9

C2E

C2C2

C2E C2 C2

C2 C2

C2E

C2C2E C2E

C2E

C2 C2E

J2E

J2 J2E

J2E

J2ED1 D1

D1E

D1E D1E

D1 D1

C3C3

C3E

J2E J2

W1 W1

W1W1

AFF

BELOW

WINDOW

BELOW

WINDOW

1H1-6

2H1-6

2H1-5

2H1-6

2H1-5

2H1-6

2H1-5

2H1-6

2H1-5

2H1-6

2H1-5

2H1-5 2H1-5

2H1-5

2H1-6 2H1-7 2H1-7 2H1-7

2H1-7

2H1-3 2H1-3

2H1-3

2H1-2

2H1-2 2H1-2

2H1-1

2H1-1 2H1-12H1-12H1-1 2H1-1

2H1-1

2H1-1 2H1-1

2H1-1

2H1-3

2H1-42H1-3

2H1-4

2H1-3

2H1-32H1-3

2H1-5

2H1-8 2H1-8

2H1-7 2H1-7 2H1-7

2H1-7

2H1-7 2H1-7

2H1-7

2H1-7 2H1-7

1H1-12

1H1-12 h h h h h h e e e ee e

C2C2 2H1-1 2H1-1 d d d d d d d d dd d dd d d c c c c cc c cc c cc c c cc c c c

2H1-5

2H1-52H1-5

2H1-5

2H1-6

2H1-62H1-62H1-6

2H1-62H1-6 2H1-6

2H1-6 b b b b b b b b b b b b b b b b b b b b b b b b

C2C2C2

2H1-5

X1 a a aa a a aaa a a a a a aa a a a

C2 C2 a,b a,b a,b a,b,c a,b,c b,c,d b,c,db,c,d c,d c,d c,d e h

J2E

2H1-2

2H1-3

1H1-6 f f f f f f f f f f f f f f f f f f

C3 C3

C3E C3C3C3

C3 C3 C3

2H1-5 2H1-5 2H1-5

2H1-52H1-52H1-52H1-5

2H1-5

2H1-52H1-5 f

2H1-8 2H1-8

2H1-82H1-8 g g g g g g g g

2H1-7

2H1-7 2H1-7

2H1-7 2H1-72H1-7

2H1-7

C3 C3 C3

C3C3E

C3E

D1E 2H1-3 2H1-3

D1E

2H1-7

2H1-7 W1 W1

D A

G H

T Z

O N

DAYLIGHT

ZONE

DAYLIGHT

ZONE

DAYLIGHT

ZONE

C3 C3E

2H1-9 2H1-9

2H1-10 2H1-10 g

C2 2H1-1

C2E C2

2H1-1 2H1-1

2H1-1 2H1-1 e e

C2 C2

2H1-7

2H1-6 2H1-6

2H1-6 2H1-6 2H1-6

C2 C2 C2 C2 e f

2H1-1

X1 2H1-1

2H1-6

2H1-5

Drawing Title

Approved: Project Director

Project Title

Date

Location

Checked

Building Number

Project Number

Drawing Number

Drawn

Dwg. of

CONSULTANTS: ARCHITECT/ENGINEERS: Office of Construction and Facilities Management

7370 Cabot Court, Ste. 103 Melbourne, FL 32940

COA #15 TLC NO:

Phone: 321-636-0274

Fax: 321-639-8986 www.tlc-engineers.com

VA FORM 08−6231

1 2 3 4 5 6 87 9

MALCOM RANDAL VA HOSPITAL

ADMINISTRATION BUILDING

VAWPBMC PLANNING AND ENGINEERING

IF THIS DRAWING IS LESS THAN 30" X

42" IT IS A REDUCED SIZE DRAWING

CONSTRUCTION DOCUMENTS

FLGAINESVILLE

BLDG #

573-360

AMHMMH

ELECTRICAL LIGHTING PLANS

518056 06/18/2021

M. MONCEF HADIJI, P.E.

Florida License #48022

06/18/2021

EL101

1/8" = 1'-0"

FIRST FLOOR PLAN - LIGHTING 1/8" = 1'-0"

SECOND FLOOR PLAN - LIGHTINGN

PLAN NOTES:

GENERAL NOTES:

ALL EXTERIOR AND SITE LIGHTING CIRCUIT SHALL BE CIRCUITED TO LIGHTING CONTROL

PANEL/RELAY. PROVIDE 7-DAY PROGRAMMABLE TIME CLOCK LIGHTING CONTROL PANEL.

ALTERNATE #3: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR SECOND FLOOR BUILD-OUT.

ALTERNATE SHALL INCLUDE SHELL 2ND FLOOR ONLY. SHELL SHALL INCLUDE PANELBOARDS,

TRANSFORMERS, LIGHTING, RECEPTACLES ALONG PERIMETER AT 50' INTERVALS, POWER TO

MECHANICAL EQUIPMENT, POWER TO PLUMBING EQUIPMENT, AND POWER ASSOCIATED WITH

ELEVATORS.

ALTERNATE #5: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR DELETION OF WESTERN

ELEVATOR IN THE BANK OF TWO ELEVATORS.

PROVIDE LIGHTING CONTROL STATION FOR MANUAL ON/OFF/DIM CAPABILITIY FOR

ZONES A, B, C, D, AND E.

2 MOUNT FIXTURES TO ALUMINUM WALKWAY COVER.

3 MOUNT FIXTURES TO DECORATIVE COLUMN ABOVE THE ALUMINUM WALKWAY COVER TO LIGHT

BUILDING FACADE.

DAYLIGHT SENSOR COMPONENT TO CONTROL DIMMING FOR LIGHTING FIXTURES WITHIN

DAYLIGHITNG ZONE.

J J

JJJ

L V

J JJJ

J J

JJJ

L V

J J

1T1

1L21L1

A B C D E

LOBBY

1-100

OFFICE

1-101

MECHANICAL

1-102

CORRIDOR

1-103

WOMEN

1-104

MEN

1-105

HAC ROOM

1-106

PUMP ROOM

1-107

STAIR B

1-108

BREAK ROOM

1-110

WOMEN

1-112

MEN

1-113

TELE/COM

1-115

VESTIBULE

1-114

STAIR A

1-118

RECEIVING

1-117

CORRIDOR

1-116

ELECTRICAL ROOM

1-109

COPIER

1-111

0.9

1TC1

1LDP

1M1

CLG/PWR

CLG/PWRCLG/DATA

CLG/PWR

CLG/DATACLG/PWR

CLG/PWR

CLG/DATA

CCC

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA CLG/PWR

CLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA CLG/PWR

CLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

ELEVATOR

DISC-2

ELEVATOR

CAB DISC-2

ELEVATOR

DISC-1

ELEVATOR

CAB

DISC-1

120V DOOR

CONTROL

120V DOOR

CONTROL

CLG

FACP

120V DDC

CONTROL

CLG

120V DDC

CONTROL

CLG

SWB-14

1L2-29

120V DDC

CONTROL

CLG

SWB-15

1L2-38 1L2-35

1L2-39

1L1-6

1L1-2

1L1-2 1L1-2

1L2-18 1L2-18

1L1-17

1L2-18

1L1-24

1L1-1

1L1-3 1L1-3

1L1-3

1L 1-

1L1-23

1L1-30

1L1-26

1L1-261L1-26

1L1-17

1L2-9

1L1-17

1L1-20

1L2-19

1L2-9 1L1-171L2-91L1-17

1L2-12

1L1-24

1L2-12

1L1-24

1L2-9

1L1-24

1L2-9

1L1-8

1L1-25

1L1-34

1L2-1

1L1-29

1L2-2

1L1-38

1L2-3

1L1-331L2-4

1L1-421L2-51L2-6 1L1-37

1L1-46

1L2-71L1-411L2-81L2-10 1L1-50

1L2-11 1L1-45

1L1-54

1L2-131L1-491L2-14

1L2-15 1L1-581L1-531L2-161L1-571L2-17

1L2-12

1L2-27

1L1-15

1L1-22

1L2-32

1L2-30

1L1-8

1L1-13

1L1-21

1L1-12

1L1-12 1L1-12

1L1-12

1L1-30

1L2-27

WP WP

3 1

42"AFF

1L1-28

DRYER

ELEVATOR

SHUNT TRIP

ELEVATOR

SHUNT TRIP

DRYER DRYER

1L1-10 1L1-5

1L2-37

42"AFF

1L1-19

1L1-24

1L1-17

1HDP 1H1

SWB

R C

P 1-

R C

P 1-

30AR

1L2-33

1L2-40

1L1-3

1L 1-

1L2-19

1L1-23

1L2-19

1L1-321L1-271L1-36

1L1-31

1L1-401L1-35

1L1-44

1L1-391L1-48

1L1-43

1L1-52

1L1-47

1L1-561L1-511L1-55

EP401

120V DOOR

CONTROL

CLG

1L1-1

1L1-2

120V METAL

DETECTOR

CLG

1L1-4

1L1-8

1L2-31

1L2-28

ELEVATOR

DISC-3

ELEVATOR

CAB DISC-3

SWB-16 4

30AR

1L2-34

ELEVATOR

SHUNT TRIP

1L2-36

1L2-54

1L 2-

1L2-27

1L1-14

2L1 2L2

A B C D E

MEETING ROOM

2-100

OFFICE

2-101

STAIR B

2-108

WOMEN

2-104 ELEC ROOM

2-107

OIT IT

2-115

WOMEN

2-112 MEN

2-113

VESTIBULE

2-114

CORRIDOR

2-116

STAIR A

2-118

MEN

2-105

BREAK/COPY

2-117

TRAINING

2-110

0.9

2TC1

2M1

CLG/PWR

CLG/PWRCLG/DATACLG/PWR

CLG/PWR

CLG/DATA

CLG/PWR

CLG/DATA

CLG/PWR

CLG/DATA

CLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

C CLG/DATA

CLG/PWR

CLG/PWRCLG/PWR

CLG/DATA

CLG/PWRCLG/PWR

CLG/DATA

120V DDC

CONTROL

CLG

120V DDC

CONTROL

CLG

CLG/DATA

CLG/PWR

CLG/DATA

CLG/PWR

CLG/DATA

CLG/PWR

CLG/DATA

120V DDC

CONTROL

CLG

2L2-15

2L1-5

2L1-4

2L2-16

2L1-7

2L2-18

2L2-14 2L1-8

2L1-11

2L2-13 2L2-12

2L1-10

2L1-172L2-92L1-162L2-102L1-21 2L2-11

2L1-202L2-8 2L1-25

2L2-7

2L1-242L2-6

2L1-292L2-12L1-282L2-32L1-332L2-5

2L1-1

2L2-212L1-30

2L2-4 2L1-56

2L1-32

2L1-56

2L1-34

2L1-30 2L2-21

2L2-21

2L1-32

2L2-22 2L1-35

2L2-22

2L1-32

2L2-17

2L1-32

2L2-17

2L1-34

2L2-17

2L1-34

2L2-2

2L1-34

2L2-2

2L1-34

2L 1-

2L1-40

2L2-19

2L1-50 2L2-19

2L2-19

2L1-37

2L1-372L1-37

2L1-49

2L1-46

2L1-462L1-46

2L2-20

2L1-51

2L2-20

2L1-44

2L2-20

2L1-38

2L1-37

2L1-41

2M1-17

2L1-45

2L1-52

2L1-55

2L1-53

2 1

3 2

2 1

2 2

1 1

3 3 3

DRYERDRYER

2H1

2HDP

2T1 2T2

R C

P 2-

C P

2L1-37

2L1-39 2L1-36

DRYER DRYER

2L1-38

COPIER

2L1-47 2L1-48

2L1-49

COPIER

2L2-19

2L2-20

2L1-3

2L1-2

2L1-9

2L1-6

2L1-13 2L1-12

2L1-152L1-142L1-19

2L1-182L1-232L1-22

2L1-272L1-262L1-31

EP401

2L1-54

42" AFF

2L1-37

2L1-49

2L1-57

2L 2-

2L2-17 2L2-17

2L2-17

2L1-32

2L2-22 2L2-22

2L1-35

2L2-4 2L2-4

2L2-4 2L1-56

2L1-56

2L1-562L1-58

2L1-58

2L1-59

2L1-59 2L1-59

2L1-59

2L1-60

2L1-61

2L1-35

Drawing Title

Approved: Project Director

Project Title

Date

Location

Checked

Building Number

Project Number

Drawing Number

Drawn

Dwg. of

CONSULTANTS: ARCHITECT/ENGINEERS: Office of Construction and Facilities Management

7370 Cabot Court, Ste. 103 Melbourne, FL 32940

COA #15 TLC NO:

Phone: 321-636-0274

Fax: 321-639-8986 www.tlc-engineers.com

VA FORM 08−6231

1 2 3 4 5 6 87 9

MALCOM RANDAL VA HOSPITAL

ADMINISTRATION BUILDING

VAWPBMC PLANNING AND ENGINEERING

IF THIS DRAWING IS LESS THAN 30" X

42" IT IS A REDUCED SIZE DRAWING

CONSTRUCTION DOCUMENTS

FLGAINESVILLE

BLDG #

573-360

AMHMMH

ELECTRICAL POWER PLANS

518056 06/18/2021

M. MONCEF HADIJI, P.E.

Florida License #48022

06/18/2021

EP101

1/8" = 1'-0"

FIRST FLOOR PLAN - POWER 1/8" = 1'-0"

SECOND FLOOR PLAN - POWER

PLAN NOTES:

PROVIDE CEILING MOUNTED JUNCTION BOX TO BE USED FOR FURNITURE ACTIVATION.

PROVIDE 6' ELECTRICAL WHIP FOR FURNITURE CONNECTION. COORDINATE FINAL LOCATION OF

JUNCTION BOX WITH CONSTRUCTION MANAGER/FURNITURE CONTRACTOR PRIOR TO START

OF WORK.

PROVIDE CEILING MOUNTED JUNCTION BOX TO BE USED FOR FURNITURE ACTIVATION. CIRCUIT

IN THIS JUNCTION BOX IS PROVIDING AUTOMATIC RECEPTACLE CONTROL TO MEET

REQUIREMENT OF ASHRAE 90.1. PROVIDE 6' ELECTRICAL WHIP FOR FURNITURE CONNECTION.

COORDINATE FINAL LOCATION OF JUNCTION BOX WITH CONSTRUCTION MANAGER/FURNITURE

CONTRACTOR PRIOR TO START OF WORK. CIRCUIT SHALL CONTROLLED BASED ON STATUS OF

OCCUPANCY SENSOR IN CORRESPONDING AREA.

PROVIDE CEILING MONTED JUNTION BOX TO BE USED FOR LOW-VOLTAGE WIRING. PROVIDE 1"

CONDUIT TO NEAREST CABLE TRAY. COORDINATE FINAL LOCATION OF JUNCTION BOX WITH

CONSTRUCTION MANAGER/FURNITURE CONTRACTOR PRIOR TO START OF WORK.

COORDINATE FINAL LOCATION OF MRL ELEVATOR CONTROLLER AND DISCONNECT LOCATION IN-

FIELD PRIOR TO START OF WORK.

STACK 75kVA TRANSFORMERS.

COORDINATE RECEPTACLE TYPE W/ ELECTRICAL PIT SUMP PUMP.

PROVIDE A GFCI BREAKER FOR WATER FOUNTAIN.

MULTI-ZONE LOW VOLTAGE OVERIDE SWITCH FOR CONTROLLED RECEPTACLES. ZONE A IS THE

NORTHERN OPEN OFFICE SPACE, ZONE B IS THE SOUTHERN OPEN OFFICE SPACE, ZONE C IS THE

WESTERN BREAK/COPY ROOM, AND ZONE D FOR THE SECOND FLOOR ONLY SHALL BE THE

ADDITIONAL NORTHERN BREAK/COPY ROOM.

PROVIDE JUNCTION BOX TO POWER NAC.

GENERAL NOTES:

ALTERNATE #3: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR SECOND FLOOR BUILD-OUT.

ALTERNATE SHALL INCLUDE SHELL 2ND FLOOR ONLY. SHELL SHALL INCLUDE PANELBOARDS,

TRANSFORMERS, LIGHTING, RECEPTACLES ALONG PERIMETER AT 50' INTERVALS, POWER TO

MECHANICAL EQUIPMENT, POWER TO PLUMBING EQUIPMENT, AND POWER ASSOCIATED WITH

ELEVATORS.

ALTERNATE #5: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR DELETION OF WESTERN

ELEVATOR IN THE BANK OF TWO ELEVATORS.

M M

M M M

M M

M MM

A B C D E

LOBBY

1-100

OFFICE

1-101

MECHANICAL

1-102

CORRIDOR

1-103

WOMEN

1-104

MEN

1-105

HAC ROOM

1-106

PUMP ROOM

1-107

STAIR B

1-108

BREAK ROOM

1-110

WOMEN

1-112

MEN

1-113

TELE/COM

1-115

VESTIBULE

1-114

STAIR A

1-118

RECEIVING

1-117

CORRIDOR

1-116

ELECTRICAL ROOM

1-109

0.9

FCU-1-2

FCU-1-4FCU-1-4

FCU-1-4 FCU-1-4

FCU-1-4FCU-1-4

FCU-1-4 FCU-1-4

FCU-1-4

UH-1

UH-2

AHU-57

ERV-1

FCU-1-4

1HDP-5

1HDP-4

1HDP-2

1HDP-3

1L2-47,49

1L2-42,44

1M1-9,111M1-9,11

1M1-9,11

1M1-10,121M1-5,71M1-5,7

1M1-6,81M1-5,71M1-5,7

1M1-6,8

1M1-6,81M1-6,8

1M1-2,41M1-2,41M1-2,4

1M1-2,4

1M1-1,3

1M1-13,15

EF-151

FCU-1-3

1L2-51,53

EF-152

1L2-46

1L2-55

1M1-10,12

1L2-43,45

FCU-1-4

FCU-1-1

FCU-1-4

CCU-4

CCU-3

CCU-6

CCU-5

1M1-1,3

30AR

20AF

60AR

60AF

A F

200AR

120AF

200AR

120AF

30AR

20AF

1M1-14,16,18

UNDER SINK POINT OF

USE WATER HEATER

UNDER SINK POINT OF

USE WATER HEATER

1M1-17,19 1M1-20,22

1M 1-

60AR

1L2-52

RECIRCULATION PUMP

CRAC-1

ACC-1

ACC-2

1HDP-6

60AR

50AF

1H1-31,33,35

30AR

15AF

1H1-37,39,41

30AR

15AF

FCU-2-4

1M1-6,8

FCU-1-3

VALVE BOX

1M1-21

1M1-23

1M1-25

1M1-27

60AR

60AF

4X1H D

P -7

CCU-6-A

A B C D E

MEETING ROOM

2-100

OFFICE

2-101

STAIR B

2-108

WOMEN

2-104 ELEC ROOM

2-107

OIT IT

2-115

WOMEN

2-112 MEN

2-113

VESTIBULE

2-114

CORRIDOR

2-116

STAIR A

2-118

MEN

2-105

BREAK/COPY

2-117

TRAINING

2-110

0.9

FCU-2-2

FCU-2-1

FCU-2-4

EF-154

EF-153

FCU-2-3FCU-2-3

FCU-2-3 FCU-2-3

FCU-2-3FCU-2-3

FCU-2-3 FCU-2-3

FCU-2-3

FCU-2-3 FCU-2-3

AHU-58ERV-2

2M1-10,122M1-10,12

2M1-9,112M1-9,112M1-9,11

2M1-10,12

2M1-6,82M1-6,82M1-6,8

2M1-5,72M1-5,72M1-5,7

2M1-2,42M1-2,42M1-2,4

2M1-1,3

2M1-1,32M1-1,3

2M1-2,4

2L2-35

2L2-33

2M1-23,25

2M1-10,12

2M1-13,152M1-14,16,18

2L2-34,36

FCU-2-3

2M1-5,7

2M1-6,8

30AR

20AF

30AR

20AF

EWH-1

30AR

2L2-38,40

2M1-19,212M1-20,22

2M1-24,26

60AR

UNDER SINK POINT OF

USE WATER HEATER

UNDER SINK POINT OF

USE WATER HEATER

2L2-30

2L2-32

RECIRCULATION PUMP

CRAC-2

2HDP-4

60AR

50AF

VALVE BOX

FCU-2-5

2M1-1,3

2M1-27

2M1-29

2M1-31

2M1-33

Drawing Title

Approved: Project Director

Project Title

Date

Location

Checked

Building Number

Project Number

Drawing Number

Drawn

Dwg. of

CONSULTANTS: ARCHITECT/ENGINEERS: Office of Construction and Facilities Management

7370 Cabot Court, Ste. 103 Melbourne, FL 32940

COA #15 TLC NO:

Phone: 321-636-0274

Fax: 321-639-8986 www.tlc-engineers.com

VA FORM 08−6231

1 2 3 4 5 6 87 9

MALCOM RANDAL VA HOSPITAL

ADMINISTRATION BUILDING

VAWPBMC PLANNING AND ENGINEERING

IF THIS DRAWING IS LESS THAN 30" X

42" IT IS A REDUCED SIZE DRAWING

CONSTRUCTION DOCUMENTS

FLGAINESVILLE

BLDG #

573-360

AMHMMH

ELECTRICAL POWER PLANS -

MECHANICAL EQUIPMENT

518056 06/18/2021

M. MONCEF HADIJI, P.E.

Florida License #48022

06/18/2021

EP201

1/8" = 1'-0"

FIRST FLOOR PLAN - MECHANICAL EQUIPMENT POWER

1/8" = 1'-0"

SECOND FLOOR PLAN - MECHANICAL EQUIPMENT POWER

N N

GENERAL NOTES:

ALTERNATE #3: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR SECOND FLOOR BUILD-OUT.

ALTERNATE SHALL INCLUDE SHELL 2ND FLOOR ONLY. SHELL SHALL INCLUDE PANELBOARDS,

TRANSFORMERS, LIGHTING, RECEPTACLES ALONG PERIMETER AT 50' INTERVALS, POWER TO

MECHANICAL EQUIPMENT, POWER TO PLUMBING EQUIPMENT, AND POWER ASSOCIATED WITH

ELEVATORS.

ALTERNATE #5: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR DELETION OF WESTERN

ELEVATOR IN THE BANK OF TWO ELEVATORS.

F F

F F F

F F

T S

F S

T S

F S

T S

R R

F F

R R

S P

RTI

F R

R T

I R

R T

F F

RRTI

R T

T S

F S

R R

T I

A B C D E

LOBBY

1-100

OFFICE

1-101

MECHANICAL

1-102

CORRIDOR

1-103

WOMEN

1-104

MEN

1-105

HAC ROOM

1-106

PUMP ROOM

1-107

STAIR B

1-108

BREAK ROOM

1-110

WOMEN

1-112

MEN

1-113

TELE/COM

1-115

VESTIBULE

1-114

STAIR A

1-118

RECEIVING

1-117

CORRIDOR

1-116

ELECTRICAL ROOM

1-109

0.9

OAHU-1

FACP

FAAP

ERV-1

PRIMARY

ALTERNATE

FIRE HAT

SHUNT TRIP

BATTERY

LOWERING

LOCATE AT

ELEVATOR

CONTROL

PRIMARY

ALTERNATE

FIRE HAT

SHUNT TRIP

BATTERY

LOWERING

LOCATE AT

ELEVATOR

CONTROL

75CD

S8S9

75CD

S10

S11 S12

S13

N10

75CD

75CD 75CD

75CD

S15

S14

S16

N12

75CD

S17

S18

N14N1545CD

45CD

S19

S21

N18 N20

75CD

S22

N22

75CD

N23

S23

S56

S24

S25S26

S27

S28

S29

S30

S31

S32

S33

N24 S34

75CD

15CD15CD

N19 N21

S55

S51

S52 S53 S54

75CD

N25

S62

S63

S64

S65

S66

PRIMARY

ALTERNATE

FIRE HAT

SHUNT TRIP

BATTERY

LOWERING

S67

S68S69

75CD

N50

N49

75CD

N51

CRAC-1

N52

S90

S91

S92

N17

45CD

75CD

N13

N16

75CD

S94

S93

S95

S96

S101

A B C D E

MEETING ROOM

2-100

OFFICE

2-101

STAIR B

2-108

WOMEN

2-104 ELEC ROOM

2-107

OIT IT

2-115

WOMEN

2-112 MEN

2-113

VESTIBULE

2-114

CORRIDOR

2-116

STAIR A

2-118

MEN

2-105

BREAK/COPY

2-117

TRAINING

2-110

0.9

OAHU-2

ERV-2

75CD

N27

N28

N26

75CD

S36S37

S38

S39

S40

N29

75CD

N30

N31

N32

75CD

75CD 75CD

75CD

N33

N34

N35

S41

N36

S42

75CD

N37 N38

N39N40

S43

45CD

75CD

45CD45CD

S44

S45 N41

75CD

15CD

45CD 45CD

15CD

N42

N43 N44

N45

S46

N46

75CD

N47 S47

S48

S49

S50

N48

75CD

MAGNETIC HOLD OPEN

S58

S57

S60

S59

N53

75CD

S78

S79

S80

N54

N55

75CD

N56

75CD

N57

75CD

S82

S83S81

S84

S86 S85

S87

S88

S89

N58

75CD

S75

S74

S77

S76

NAC

CRAC-2S97

S98

S99

S100

S102

Drawing Title

Approved: Project Director

Project Title

Date

Location

Checked

Building Number

Project Number

Drawing Number

Drawn

Dwg. of

CONSULTANTS: ARCHITECT/ENGINEERS: Office of Construction and Facilities Management

7370 Cabot Court, Ste. 103 Melbourne, FL 32940

COA #15 TLC NO:

Phone: 321-636-0274

Fax: 321-639-8986 www.tlc-engineers.com

VA FORM 08−6231

1 2 3 4 5 6 87 9

MALCOM RANDAL VA HOSPITAL

ADMINISTRATION BUILDING

VAWPBMC PLANNING AND ENGINEERING

IF THIS DRAWING IS LESS THAN 30" X

42" IT IS A REDUCED SIZE DRAWING

CONSTRUCTION DOCUMENTS

FLGAINESVILLE

BLDG #

573-360

DRSMMH

FIRE ALARM PLANS

518056 06/18/2021

M. MONCEF HADIJI, P.E.

Florida License #48022

06/18/2021

FA101

1/8" = 1'-0"

FIRST FLOOR PLAN - FIRE ALARM

1/8" = 1'-0"

SECOND FLOOR PLAN - FIRE ALARM

N N

GENERAL NOTES:

ALTERNATE #3: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR SECOND FLOOR BUILD-OUT.

ALTERNATE SHALL INCLUDE SHELL 2ND FLOOR ONLY. SHELL SHALL INCLUDE MINIMAL

NOTIFICATION AND SIGNAL DEVICES.

ALTERNATE #5: PROVIDE DEDUCTIVE ALTERNATE PRICE FOR DELETION OF WESTERN

ELEVATOR IN THE BANK OF TWO ELEVATORS.

Sheets

E-002 - ELECTRICAL GENERAL NOTES

EL101 - ELECTRICAL LIGHTING PLANS

EP101 - ELECTRICAL POWER PLANS

EP201 - ELECTRICAL POWER PLANS - MECHANICAL EQUIPMENT

FA101 - FIRE ALARM PLANS

File details come from the government source that posted it. Updated Oct 25, 2021.