Amendment 0005 Attachment 1 RFI 2 Seed Project Physical_Access_Control__Data.pdf

309 East 10th Drive Mesa, Arizona 85210

Project Name: Spec Section #:

Job Number: Submittal #:

Date: Revision #:

Spec Section Title:

Submittal Title:

Contractor Stamp:

Architect / Consultant Stamp:

VA Stamp:

Remarks:

From:

SUBMITTAL

Joey Tapaha

28 13 00 for the cabling.

28-007

Physical Access Control System

Access Control & IP Video System

Per the request from the VA, this submittal contains all devices compatible with the C cure 9000 system. Please review this submittal with submittal 28-002.2

Clinical Lab and Pharmacy Building

16130

6/25/2018

REVIEWED

By Joey Tapaha at 2:51 pm, 6/25/18

Climatec LLC. Merging Buildings & Technology 2851 West Kathleen Road, Phoenix, Arizona, 85053 info@climatec.com (P) 602.944.3330 (F) 602.674.1279

SUBMITTAL BOOK:

Access Control & IP Video Systems

Project:

Prescott VA New Lab Pharmacy

500 N. Highway 80, Bldg. 164

Prescott, AZ 86313

Chang Order Re-Submittal Date:

June 7, 2018

References 3 of many jobs with SRP over the last 3 years Job #1 2016 - Complete System Upgrade at all SRP Sites $350,000 Completed 8/2017

SALT RIVER PROJECT

Audie Whipple 1521 Project Dr.

Tempe, AZ 85281 602-236-5207 audie.whipple@srpnet.net

Job #2 2017 – 16th St Security Upgrades $173,000 Completed 8/2017

SALT RIVER PROJECT

Audie Whipple 1521 Project Dr.

Tempe, AZ 85281 602-236-5207 audie.whipple@srpnet.net

Job #3 2017 – PAB Improvements Project East Wing $330,000 Completed 4/2017

SALT RIVER PROJECT

Audie Whipple 1521 Project Dr.

Tempe, AZ 85281 602-236-5207 audie.whipple@srpnet.net

1 of many jobs with AGUHSD over the past 10 years Job #4 2017 – Verrado Field House $117,000 Completed 12/2017 Agua Fria Unified School District Mary Hammonds 623-932-7077 mhammonds@aguafria.org www.swhouse.com

Features That Make a Difference:

• Powerful network-ready door controller for up to 32 readers (16 from ACMs)

• Embedded lock power management lowers installation costs

• Hardened Linux embedded OS for improved security and scalability

• Includes global anti-passback and advanced peer-to-peer clustering

• Native intrusion zone functionality

• LCD provides important controller status and diagnostics information

• Manages up to 500,000 cardholders in local memory

• Dedicated input for fire alarm interlock overrides door locks during fire conditions

• Onboard 256-bit AES network encryption

• Tested and validated for FIPS 140-2 under the National Institute of Standards and Technology (NIST) Cryptographic Module Validation Program

• Compatible with C•CURE 9000 v2.30 and above2

• Enables ASSA ABLOY Aperio or Schlage AD300 and AD400 wireless locks to communicate with C•CURE 9000 providing a fully integrated and managed lock solution

• Rack-mount models provide flexibility in mounting options

• Great solution for enterprise and government installations iSTAR Ultra Access Controller for up to 32 Readers1 iSTAR Ultra is a powerful, network-ready controller that supports up to 32 readers1.

The strong feature set answers the most demanding access control requirements of enterprise and government applications.

Rack-mount and wall-mount options provide installation flexibility, while iSTAR Ultra’s unique lock power management eliminates the need for separate lock power interface boards. iSTAR Ultra features a hardened Linux kernel for its operating system, improving the security and scalability of the system.

Supports up to 32 Readers iSTAR Ultra uniquely combines support for traditional hard-wired access control doors with support for wireless lock sets, all in the same controller. Up to 32 readers are supported by the iSTAR Ultra, of which 16 may come from the Access Control Module’s (ACM) I/O units – the rest can be made up of wireless lock sets and devices.

iSTAR Ultra is ideal for areas that require many readers in close proximity to the panel. For more distributed installations, iSTAR Ultra includes up to 16 RS-485 ports, allowing the installer to run longer distances to each door.

iSTAR Ultra uses a General Controller Module (GCM) which includes standard 2GB RAM and 16GB SD card for memory, and has two onboard gigabit network ports for reliable network communications.

The GCM controls up to two ACMs, with each ACM supporting up to eight Wiegand or RM readers, along with 24 supervised inputs and 16 outputs which can be individually wet- or dry-configured.

iSTAR Ultra also includes an alphanumeric LCD to provide status and troubleshooting information. Database backups and all buffered transactions are stored to non-volatile SD card memory. A real-time clock battery keeps the clock powered during a power failure.

Network Ready iSTAR Ultra includes two onboard gigabit network ports for primary and secondary communications to the host. 256-bit FIPS 197 and FIPS 140-2 AES network encryption, with custom key management, secures the controller from potential network threats. iSTAR Ultra supports both static and dynamic IP addresses, using DHCP and DNS to simplify network installation. In addition, the powerful iSTAR Configuration Utility (ICU) reduces startup time by allowing you to view online controllers, change configuration parameters, and download new firmware from a single interface.

1 Up to 16 readers hard-wired through the ACMs 2 iSTAR Ultra is not compatible with C•CURE 800/8000

Features

Embedded Lock Power Management The iSTAR Ultra’s ACM offers a unique, straightforward approach to managing the complete lock power needs of an installation. The ACM is designed to distribute power directly to each lock circuit without needing a separate fused distribution board (and the associated interconnect wiring). Each ACM has two separate lock power feeds in addition to controller power.

These feeds can be used for different voltages (12 V and 24 V for example) or for battery-backed and non battery-backed power sources to comply with certain local life safety codes.

Each lock output can then be selected to use either a dry contact, lock power 1, or lock power 2, providing tremendous flexibility. In addition, each lock circuit is protected with a PTC resettable fuse and over-voltage surge protection through the extensive use of transzorbs, and includes a socketed relay for quick field replacement. Each lock circuit can be individually selected to unlock or lock based on the dedicated fire alarm input setting, meeting life safety requirements.

Ensure Reliable Communication with Clusters iSTAR Ultra supports peer-to-peer communications across clusters meaning that the controllers communicate with one another without needing host intervention. Clusters are user-defined groups of up to 16 controllers and can be created to enhance security by separating a widely dispersed facility into different controlled areas. For example, events linking inputs on one controller to outputs on another controller will still be active without the host.

Local and Global Anti-Passback Provides Effective System-Wide Security Anti-passback prevents cardholders from passing their credentials back to others in order to gain access to secured areas. Global anti-passback is critical for ensuring uncompromised security on a large scale. Building upon cluster based anti-passback as described above, the controllers are able to send an anti-passback violation notice to the C•CURE server. Tailgating, or following another cardholder into a secured area without presenting a separate badge, can easily be flagged within the C•CURE monitoring station.

Rack-Mount Flexibility iSTAR Ultra is available in a modular rack-mount configuration, reducing the space requirements and costs associated with installing a panel on the wall. Separate GCM and ACM modules can be arranged in the rack to optimize your server room installation. For example, the GCM can be mounted in the front of a four-post rack, while the ACM and field wiring can be located in the rear of the rack. Field wiring on the ACM is easily routed through the top and/or bottom of the enclosure, with the ACM board mounted front and center for convenient servicing.

iSTAR Ultra is easy to configure in its convenient rack-mount model

Keypad Commands Provide the Ultimate in Control iSTAR Ultra supports custom keypad commands which provide a powerful way to easily activate events in C•CURE.

These commands include anything from triggering a duress call and sounding an alarm, to locking and unlocking doors directly from an RM reader keypad. Commands can be configured to require a card presentation and/or a card and PIN to validate the command. Keypad commands can also be used to arm and disarm intrusion zones.

Improves Life Safety A dedicated input for a fire alarm tie-in automatically locks or unlocks selected door lock outputs in the event of a fire condition. The fire input may be unsupervised or supervised, and the release circuit does not require software programming for operation. In addition, a second input for a manual keyswitch is provided, such that the door lock outputs will not re-lock unless authorized safety personnel confirm the safety of the building via the keyswitch. The keyswitch functionality is enabled via an onboard DIP switch.

Features

Extended Card Formats Enhance Security iSTAR Ultra supports extended card formats of up to 256 bits, providing the utmost in flexibility when configuring custom card formats. iSTAR Ultra supports the full 200-bit FASC-N format for compliance with the US Government’s FIPS 201 initiative, as well as the 128-bit GUID format for PIV-I credentials. These extended cardholder formats are stored locally in iSTAR allowing the controller to make the access decision even when it is offline from the host. Each format supports multiple data fields such as card number, site code, issue code, parity, agency code, system code, plus up to four custom card integer fields. Longer card numbers and formats offer greater protection against card duplication, and are especially valuable to customers who require card numbers that exceed 10 digits.

Cardholder Flexibility Used with C•CURE 9000, iSTAR Ultra allows administrators to assign up to five cards per cardholder record rather than having to create a separate record for each card. This simplifies the management and maintenance of personnel records. For additional flexibility, iSTAR Ultra can support up to 128 card formats system-wide and ten card formats per reader, including smart cards. This expanded ability to use multiple card types (such as 26-bit, 37-bit, or Corporate 1000) at a single reader frees customers from having to consolidate or re-issue new cards.

Built-in Diagnostics to Easily Test and Troubleshoot iSTAR Ultra includes both built-in web diagnostics pages and a local LCD to test and troubleshoot inputs, outputs, reader ports, and last card read. In addition, via the network, you can retrieve real-time status and diagnostics of:

• controller time/boot time

• total/available memory

• connection status

• firmware and OS versions

• hardware (MAC) and IP addresses

• downloaded clearances and cardholders

Fully Integrated and Managed Lock Solution Utilizing iSTAR Ultra, wireless locks from ASSA ABLOY or Schlage communicate with C•CURE 9000, providing a fully integrated and managed lock solution. Up to 32 ASSA ABLOY Aperio or Schlage AD300 and AD400 locksets can be managed by a single iSTAR Ultra. In addition to traditional locksets, the ASSA ABLOY Aperio line also includes cabinet and data center locks, allowing you to extend the breadth of your access control system to non-traditional openings. Each lockset communicates using AES 128-bit encrypted wireless technology to the wireless hub, which is then connected to the iSTAR Ultra with a simple RS-485 communications bus. Each hub can accommodate up to eight Aperio wireless locks or 16 Schlage wireless locks.

All activity and alarms from each wireless device are sent to the iSTAR Ultra and then up to the C•CURE 9000 in real time, guaranteeing a high level of control and visibility of door actions. Besides standard card access transactions, each device also communicates low battery, tamper, and communications status to the system.

iSTAR Ultra and Wireless Lock System Layout

1 2 3 4 5 victor Application Server3

1 2 3 4 5

C•CURE 9000 Client iSTAR Ultra Wall-Mount

Wireless Lock4 Wireless Lock4

Traditional Hard Wired Doors Up to 16 Readers

Wireless Hub

Up to eight Aperio locks or 16 Schlage locks

Up to eight Aperio locks or 16 Schlage locks

Wireless Hub

Ethernet

RS-485

3 The C•CURE 9000 Server component is now called the victor Application Server.

4 ASSA ABLOY Aperio or Schlage AD300 or AD400 but not both.

www.swhouse.com

Related Products Approvals

© 2015 Tyco Security Products. All Rights Reserved. SH0302-DS-201506-R06-LT-EN Tyco and the product names listed above are marks and/or registered marks. Unauthorized use is strictly prohibited.

Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your sales representative.

Specifications Physical Dimensions (H x W x D)

Wall-Mount . . . . . . . . . . . . . . . 635 x 560 x 127 mm (25.0 x 22.0 x 5.0 in) Rack-Mount GCM . . . . . . . . . 86 x 445 x 252 mm (3.4 x 17.5 x 10 in)

(2U rack height) Rack-Mount ACM . . . . . . . . . 175 x 445 x 125 mm (6.9 x 17.5 x 4.9 in)

(4U rack height) GCM Board . . . . . . . . . . . . . . 165 x 266 x 26 mm (6.5 x 10.5 x 1.02 in) ACM Board . . . . . . . . . . . . . . 115 x 397 x 36 mm (4.5 x 15.7 x 1.4 in)

Weight Wall-Mount . . . . . . . . . . . . . . . 12.3 kg (27 lbs) Rack-Mount GCM . . . . . . . . . 4.3 kg (9.5 lbs) Rack-Mount ACM . . . . . . . . . 4.1 kg (9.0 lbs)

Enclosure Material . . . . . . . . . . . . 16 gauge carbon steel, with tamper switch

Environmental Operating Temperature. . . . . . 0-50°C (32-122°F) Operating Relative Humidity . . 5-95% RH non-condensing Storage Temperature . . . . . . . -20-60°C (-4-140°F)

Electrical Power Requirements, GCM. . . . . 12 VDC +/- 20%, 0.5 A plus up to

1.5 A per RS-485 port

Power Requirements, Each ACM. . . . . . . . . . . . . . . . . . ACM board: 12 VDC +/- 20%, 0.5 A min, up to

12 A max depending on power required of connected devices (readers, door modules, PIRs). ACM lock power (optional): 0-30 VDC, up to 12 A max (two lock power inputs per ACM)

Heat Dissipation . . . . . . . . . . . . . GCM: 61 BTU/hr, each ACM: 20.5 BTU/hr Memory and RTC Backup. . . . . . CR 2032 lithium battery provides RTC backup;

database and buffered transactions stored in non-volatile memory

System and Network CPU . . . . . . . . . . . . . . . . . . . . . . Freescale i.MX6 1 GHz dual core Cortex-A9 System Memory . . . . . . . . . . . . . 2 GB RAM SD Storage . . . . . . . . . . . . . . . . . 16 GB SD card Primary Network Port . . . . . . . . . 10/100/1000 Mbps, full duplex, auto-negotiate Secondary Network Port . . . . . . . 10/100/1000 Mbps, full duplex, auto-negotiate Network Encryption. . . . . . . . . . . Optional AES 256-bit, with custom key management Indicators and Switches . . . . . . . LCD for diagnostics, LEDs for power, LAN activity, serial port activity, output status, encryption-enable switch

Memory Capacity5

Ten clearances, five cards/ person, 40-digit card . . . . . . . . . . 500,000 cardholders Transaction Buffer Size . . . . . . . . 10,000 minimum, 500,000 maximum

Inputs/Outputs, GCM Dedicated Inputs . . . . . . . . . . . . . Cabinet tamper, AC fail, low battery

Distance, GCM to ACM. . . . . . . Up to 1.83 m (6 ft)

Specifications for Wireless Lockset Support6

Wireless Lockset Technologies Supported . . . . . . . ASSA ABLOY Aperio, Schlage AD300 and AD400 GCM RS485 Ports to Connect Wireless Hubs

Max # of Locksets per RS485 Port Max # of Wireless Hubs per RS485 Port . . . . . . . . . . . . . . 15 (Aperio), 16 (Schlage) Max # of Locksets per Wirless Hub. . . . . . . . . . . . . . . . . 8 (Aperio), 16 (Schlage)

Specifications per ACM Board7

Readers Number of Readers Supported, per ACM Board Types of Readers Supported . . . . Wiegand and RM (RS-485) Reader Technologies Supported . . . . . . . . . . . . . . . . . . Multi-Technology, Proximity, Smart Card (incl. PIV II & TWIC), Wiegand, and Magnetic Stripe (RM only) Maximum Distance to Door . . . . . RM: 1,219 m (4,000 ft); Wiegand: 150 m (500 ft) Reader Power Available (dependent on power supply) . . . 12 VDC, 1.5 A max per reader (including aux power and RM port power) Reader Power Status Indication . On/off indication per port, through C•CURE 9000 RM Bus Communications . . . . . . Eight ports, RS-485 half duplex, two wire, plus optional two wires for device power

Inputs Number of General Purpose Inputs per ACM. . . . . . . . . . . . . . 24, configurable supervision per input Additional Dedicated Inputs. . . . . cabinet tamper, fire alarm interlock, fire alarm keyswitch override (supervision supported) Input Expansion. . . . . . . . . . . . . . Up to 128 additional inputs using I8 modules on RM bus

Outputs Number of Relay Outputs per ACM . . . . . . . . . . . . . . . . . . . 16 (eight for locking devices, eight for local annunciation) Output Power Feeds . . . . . . . . . . Two per ACM (L1 and L2), 0-30 VDC, 12 A max.

Voltage value of each feed displayed through

C•CURE 9000

Output Power Selection. . . . . . . . Individually configurable via jumper as power sourcing (wet, L1 or L2), or dry contact relay Output Power (Wet). . . . . . . . . . . Up to 0.75 A per lock. Voltage follows selection of power feed (L1 or L2) Primary Lock Output Rating, Dry Contact. . . . . . . . . . . . . . . . . 0 to 30 VAC/DC, 5 A max Secondary Output Rating, Dry Contact. . . . . . . . . . . . . . . . . 0 to 30 VAC/DC, 1 A max Output Protection . . . . . . . . . . . . Individual PTC resettable fuse, snubber, transzorb, reverse polarity protection (primary lock outputs use socketed relays) Output Expansion . . . . . . . . . . . . Up to 128 additional relay outputs using R8 modules on RM bus

Regulatory Access Control . . . . . . . . . . . . . . UL 294, CSA C22.2 No. 205 (Canada) Burglar Alarm . . . . . . . . . . . . . . . UL 1076, ULc 1076 (Canada) CE. . . . . . . . . . . . . . . . . . . . . . . . EN 55022 (EMI), EN 55024 (EMC), EN 60950-1 (Safety) Safety . . . . . . . . . . . . . . . . . . . . . IEC 60950-1 EMI . . . . . . . . . . . . . . . . . . . . . . . FCC Part 15 Class A, EN 55022, ICES-003 (Canada), VCCI Class A ITE (Japan), C-Tick (AS/NZS CISPR 22 - Australia/New Zealand) EMC . . . . . . . . . . . . . . . . . . . . . . EN 55024, EN 50130-4, IEC 62599-2, EN 61000-6-1

Encryption. . . . . . . . . . . . . . . . . . . FIPS 140-2 Level 2 (Certificate #2315), FIPS 197 Seismic Certification . . . . . . . . . . OSHPD Certification File # OSP-0425-10

5 Memory allocation is dynamic and shared between cardholders, event storage, and configuration information.

6 iSTAR Ultra supports 32 readers (ACM and/or wireless) total of which 16 may come from ACMs 7 Up to two ACM boards per iSTAR Ultra

C•CURE 9000iSTAR Pro iSTAR Edge

Description Maximal Access Power/Controllers distribute and switch power to access control systems and accessories. They convert a 115VAC, 60Hz input into sixteen (16) independently controlled 12VDC or 24VDC fuse protected outputs. These Fail-Safe/

Fail-Secure power outputs may be converted to dry form “C” contacts. The outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Keypad, Push Button, REX PIR, etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric

Strikes, Magnetic Door Holders, etc. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the sixteen (16) outputs.

Maximal Series Dual P/S Access Power Controllers (fused)

Maximal Dual Power Supply Series Configuration Reference Chart

Rev. Maximal DualP/S-01302018

Key Features

- Sixteen (16) independently controlled outputs.

Output options:

a) Sixteen (16) Fail-Safe and/or Fail-Secure power outputs.

b) Sixteen (16) form “C” 5A rated relay outputs.

c) Any combination of the above.

- Sixteen (16) auxiliary power outputs (unswitched).

- Output fuses are rated @ 3.5A.

- Filtered and electronically regulated outputs.

- Supervision:

- AC Fail.

- Battery Fail and Battery Presence.

- Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.

- Alarm output relay indicates that FACP input is triggered.

- Fire Alarm disconnect input options:

a) Normally open (NO) or normally closed (NC) dry contact input

b) Polarity reversal input from FACP signaling circuit.

- Built-in charger for sealed lead acid or gel type batteries.

- Instantaneous transfer to stand-by batteries.

- UL Listed in the U.S. and Canada.

- Lifetime Warranty / Made in the U.S.A.

Altronix Model Number

Output Voltage Options Total Output

Current (16 outputs)

Fuse Protected Outputs

115VAC 60Hz Input (current)

Current per ACM8 output

Power Supply Board Input Fuse Rating

Power Supply Board Battery Fuse RatingPower Supply 1 Power Supply 2

Maximal11

AL400ULXB2 AL400ULXB2

7A 2.5A

5A/250V

15A/32V

12VDC @ 3.5A 12VDC @ 3.5A 7A

12VDC @ 2.7A 24VDC @ 2.7A 5.4A

24VDC @ 3.5A 24VDC @ 2.7A 6.2A

Maximal33

AL600ULXB AL600ULXB

7A 2.5A ---

12VDC @ 5.5A 12VDC @ 5.5A 11A

12VDC @ 5.7A 24VDC @ 5.7A 11.4A

24VDC @ 5.5A 24VDC @ 5.7A 11.2A

Maximal55

AL1012ULXB AL1012ULXB

19 5.2A 2.5A

15A/32V

12VDC @ 9.5A 12VDC @ 9.5A

Maximal75

AL1012ULXB AL1024ULXB2

19.2 7A 2.5A 5A/250V

6.3A/250V12VDC @ 9.5A 24VDC @ 9.5A

Maximal77

AL1024ULXB2 AL1024ULXB2

19.4 8.8A 2.5A 6.3A/250V

24VDC @ 9.7A 24VDC @ 9.7A

Maximal75

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com

Specifications

Maximal Series Dual P/S Access Power Controllers (fused)

Input Voltage 115VAC, 60Hz.

Fusing Varies, See Reference Chart.

Outputs Voltage 12VDC or 24VDC, see Reference Chart.

Current Varies, See Reference Chart.

Protection Fused 3.5A.

Auxiliary 3.5A (unswitched).

Other Overvoltage protection.

Filtered and regulated outputs.

Back-up Battery (not included) Capacity 12AH / 12VDC (up to 4 within enclosure).

40 AH / 65 AH (requires separate enclosure).

Type Sealed lead acid or gel type.

Fuse Rating 15A @ 32VDC Maximal33 does not have a battery fuse.

Failover Upon AC loss, instantaneous.

Fire Alarm Disconnect Latching or non-latching, individually selectable for any or all of the sixteen (16) outputs.

Supervision AC Failure Form “C” contacts.

Battery Form “C” contacts.

Indicators (LED) Input 115VAC is present.

DC Output Powered.

Battery Discharged or not connected.

Relays Individual LEDs indicate outputs are triggered (relays energized).

FACP Indicates FACP disconnect is triggered.

Agency Listings

UL:

UL294 Access Control System Units.

cUL:

C22.2 No.205-M1983 General Signaling Equipment;

CSFM California State Fire Marshall Approved.

Physical and Environmental Dimensions (H x W x D) 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm).

Weight (approx.)

Model Product Weight Shipping Weight Maximal11 32.4 lb. (14.7 kg) 39.4 lb. (17.9 kg) Maximal33 31.6 lb. (14.3 kg) 38.6 lb. (17.5 kg) Maximal55 32.6 lb. (14.8 kg) 39.6 lb. (18.0 kg) Maximal75 33.0 lb. (15.0 kg) 40.0 lb. (18.1 kg) Maximal77 33.4 lb. (15.2 kg) 40.4 lb. (18.3 kg)

Temperature Operating 0ºC to 49ºC (32ºF to 120ºF).

Storage -20ºC to 70ºC (-4ºF to 158ºF).

Relative Humidity 85% +/- 5%.

BTU/Hr. (approx.):

Model 12VDC 24VDC 12VDC and 24VDC Maximal11 43 66 55 Maximal33 68 140 104 Maximal55 117 N/A N/A Maximal75 N/A N/A 177 Maximal77 N/A 238 N/A

VoIP

Application Diagram

Vi3026

The Smart Choice for Transmission Solutions www.vigitron.com

The Vi3026 is the next generation L2+ managed switch designed for PoE+ and high Bandwidth network applications. It provides a reliable infrastructure for your business network. The Vi3026 delivers unique intelligent features that are needed to improve the availability of your critical business applications with unique PoE monitoring and application features. The Vi3026 can be programmed to apply PoE individually timed to each port to lower the potential for power overload that can result in damage. Total power and PoE are monitored for over power conditions. Programmable IP and PoE connection reduces connection failure potentials and will automatically re-establish connections and apply PoE, reducing down time and field service calls. It can easily support any Ethernet device such as IP Phones, IP Cameras, and Wireless base stations; thus helping you to create a more efficient, better networked workforce. Full CLI documentation is provided for custom integration.

Vigitron Vi3026 is designed to meet the growing power and bandwidth requirements for IP security cameras by providing both reliability and conductivity with the ability to locate and determine network system problems:

• High PoE Power Budget: Total 525W power supply with 370W PoE budget providing 24-ports at full 15.4 W (802.3af) and 12-ports at full 30W (802.3at) with 10 watt PoE power overhead reserve.

• Programmable Video/Data packet transmission up to the Jumbo Frame limit of 9600 bytes for transmitting the highest mega pixel cameras at 100Mbps and 1Gps port speeds.

• Wide 52Gbps switch fabric assuring all required bandwidth, even with all ports at their maximum bandwidth assuring video and data quality.

• Automatic connection and re-connection with PoE application for more reliable startups reducing down time potentials.

• Programmable multicasting for compatibility and performance with largest IP video network systems.

• Programmable Rapid Spanning Tree for redundant network configuration assuring maintenance of network communication using multiple paths.

• Virtual Stacking features eliminate the need for all switches to be at the same location, while providing access to all switches anywhere on the network using one IP address.

• Automatic MAC address detection for connected devices for easy connection verification and security programming.

• Easy port feature provides one step port settings for IP camera, VoIP and wireless connections.

MaxiiNet Gigabit Ethernet L2 Plus Managed PoE SwitchTM

Features

• Provides 26 Gb Ethernet ports with 24 PoE plus 6 SFP ports

• 24 ports at 802.3af PoE and up to 12-ports at 802.3at (30W)

• Two 1Gbps independent uplink and downlink ports allow for full use of all 24-ports

• SNMP for communicating error messaging to local computers

• Automatic IP and PoE connection and reconnection

• Automatic MAC identification for all connected devices

• Individual IP Source Guard for protecting ports

• Supports Jumbo Frames up to 9600 bytes

• High Bandwidth 52Gbyte switching fabric

• Virtual Network Switch Stacking

RoHS

IP Camera

Up to 3,000 ft. (914m) Cat-5Cat-5 Cat-5

Vi3026IP Camera

IP Camera

Up to 5,000 ft./1,515 m Coax Cat-5

Cat-5

Network Switches

DSVi3026_0616

Vi2401AVi2401A

Vi2301A Vi2301A

© Copyright 2014 Vigitron, Inc.

Technical Specification

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com

Electrical Ethernet Interface RJ-45 10/100Mbps/ 1Gbps port

Throughput 95.232Mbps

Power 100-240 VAC 50~60 Hz, internal , universal

Status LEDs Power, traffic, link and PoE

Switch Capacity 38.69 MPPS, 52 Gbps

Ports Total System Ports: 26 GbE RJ-45 Ports: 20 GbE RJ-45/SFP(100/1G) Combo: 4

SFP (100/1G): 2

PoE Compatibility IEEE 802.3af, IEEE 802.3at Supports per port PoE configuration function Supports per port PoE scheduling to turn on/off the PoE

Jumbo Frame Support Yes

Mac Table Up to 8K MAC addresses

Regulatory FCC Part 15, Class A

Safety CE, UL, cUL

Environmental WEEE/RoHS

Environmental Humidity 0 to 95%, non-condensing

Temperature Operating: 32° to 104° F; 0° to 40° C Storage: -4° to 158° F; -20° to 70°C

Operating Humidity 10% to 90% , relative, noncondensing

Mechanical Dimensions 442 x 44 x 300 mm;

17.4 x 1.7 x 11.8 in (HxWxL)

Weight 5.1Kg; 11.3 lb

Material Extruded Aluminum

Accessories

• Switch

• Power Cord

• Mounting Kit

• Console Cable

• CD-ROM includes: Operations Manual, CLI Document, Quick Install Guide, and Quick Set-Up Guide

Minimum Requirements

• Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet Explorer version 6 or later

• Category 5 Ethernet network cable

• TCP/IP, network adapter, and network operating system (such as Microsoft Windows, or Linux) installed on each computer in network.

Vi3026 S20-Port 10/100/1000Base-T + 4 TP /(100/1G) SFP/UTP Combo + 2 (100/1G) SFP PoE+ L2 Plus Managed Switch

Ordering Information Part No. Description

Compatiable ANSI/IEEE Standards

IEEE 802,3

IEEE 802.3u IEEE 802.3ab IEEE802.3z IEEE 802.3af IEEE 802.3at IEEE 802.3x IEEE 802.1q IEEE 802.1p IEEE 802.1x IEEE 802.1d IEEE 802.1w IEEE 802.1s IEEE 802.1ad

IEEE 802.1AB

IEEE 802.3az IEEE 802.3ad

IEEE 802.1Q

ANSI/IEEE 802.3

Product Compatiable IEEE/ANSI Standard Ethernet 10baseT UTP Fast Ethernet 1000baseTX UTP Ethernet 1000baseTX UTP Ethernet 1000baseX Power over Ethernet Power over Ethernet; Type 1 and Type 2 Flow control Capability

VLAN

Class of Service Access Control Spanning Tree Rapid Spanning Tree Multiple Spanning Tree Link Aggregation Control Protocol (LACP) Link Layer Discovery Protocol (LLDP) Energy Efficient Ethernet Task Trunking Tag Based VLAN Auto – negotiation

Vi3026

Spanning Tree Standard Spanning Tree 802.1d Protocol (STP) Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s

Trunking Link Aggregation Control Protocol (LACP) IEEE 802.3ad

● Up to 13 groups

● Up to 16 ports per group

VLAN Supports up to 4K VLANs simultaneously (out of 4096 VLAN IDs)

● Port-based VLAN

● 802.1Q tag-based VLAN

● MAC-based VLAN

● Management VLAN

● Private VLAN Edge (PVE)

Easy Port Voice or IP video is automatically assigned to specific VLANS with appropriates levels of QoS.

Generic VLAN Protocol for automatically propagating and configuring VLANs in a bridged domain.

Registration

(GVRP)

DHCP Relay Relay of DHCP traffic to DHCP server in different VLAN. Works with DHCP Option 82.

(Layer 2)

IGMP v1/v2/v3 IGMP limits bandwidth-intensive multicast traffic to only the requesters.

Snooping Supports 1024 multicast groups (source-specific multicasting is also supported)

IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router.

IGMP Proxy Supports IGMP Proxy

MLD v1/v2 Delivers IPv6 multicast packets only to the required receivers.

Snooping

© Copyright 2014 Vigitron, Inc.

Technical Specification

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

Layer 2 Plus

Secure Shell SSH secures Telnet traffic in or out of the switch, SSH v1 and v2 are supported.

(SSH)

Secure Sockets SSL encrypts the http traffic, allowing advanced secure access to the browser-based management GUI in the switch.

Layer (SSL)

IEEE 802.1X IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash, guest VLAN , single/multiple host mode and single/multiple sessions.

Supports IGMP-RADIUS based 802.1X Dynamic VLAN assignment

Layer 2 isolation PVE (also knows as protected ports) provides L2 isolation between clients in the same VLAN.

Private VLAN Supports multiple uplinks.

Edge (PVE)

Port Security Locks MAC Addresses to ports, and limits the number of learned MAC addresses.

IP Source Guard Prevents datagram with spoofed addresses from being in the network.

Radius/ Tacacs+ Supports RADIUS and TACACS+ authentication. Switch as a client.

Storm control Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port.

ACLs Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag. Supports up to 256 entries.

Security

Hardware Supports 8 hardware queues Priority Queue

Scheduling Strict priority and weighted round-robin (WRR). Queue assignment based on DSCP and class of service (802.1p/ CoS).

Classification Port based; 802.1p VLAN priority based; IPv4/IPv6 precedence/ type of service (ToS) / DSCP based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS.

Rate Limiting Ingress policer; egress shaping and rate control; per VLAN, per port and flow based.

IPv6/IPv4 Web/ SSL, Telnet/ SSH, ping, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, Applications Syslog, DNS Client, protocol-based VLANs.

© Copyright 2014 Vigitron, Inc.

Technical Specification

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

Quality of Service

Web GUI Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs).

Interface Supports configuration, system dashboard, maintenance, and monitoring.

Dual Image Dual image provides independent primary and secondary OS files for backup while upgrading.

SNMP SNMP version1, 2c and 3 with support for traps, and SNMP version 3 user-based security model (USM).

(RMON) Remote Embedded RMON software agent supports RMON groups 1,2,3,9 (history, statistics, alarms, and events) Monitoring for enhanced traffic management, monitoring and analysis.

IPv4 and IPv6 Coexistence of both protocol stacks to migration.

dual stack

Firmware • Web browser upgrade (HTTP/ HTTPs) and TFTP Upgrade • Upgrade through console port as well

Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported.

Easy Port Easily to configure of clients’ QoS and Security capabilities.

Configuration

Other Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client/ DHCPv6 Client; SNTP; cable diagnostics; ping;

syslog; Telnet client (SSH secure support).

s-Flow The industry standard technology for monitoring high speed switched networks. It gives complete visibility into the use of networks enabling performance optimization, accounting/billing for usage, and defense against security threats.

UPnP The Universal Plug and Play Forum, an industry group of companies working to enable device-to-device interoperability by promoting Universal Plug and Play.

Management

Link Compliant with IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power on Gigabit Ethernet RJ-45 port Detection when detecting link down or idle of client. Active mode is resumed without loss of any packets when the switch detects the link up.

Green Ethernet

Link Layer Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network, Discovery principally wired Ethernet.

Protocol (LLDP)

Discovery

© Copyright 2014 Vigitron, Inc.

Notes

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com

Benefits The Vi3026 provides security, performance, quality of services, central management, and other network control capabilities. Optimized and customized design, and affordable pricing, it best fit for SMB or entry-level enterprise solution. It provides:

• Excellent Performance and Reliability: The Vi3026 passed the rigorously testing to deliver excellent performance. As a managed switching solution, it also provides the flexibility to manage and prioritize suitable-bandwidth traffic and PoE for IP Cameras and Voice.

• Easy, Simple Deployment and Configuration: The device manager software provides an intuitive, web-based interface to simplify deployment, advanced security (ACLs, IP Source guard, VLAN…etc), and quality of service (QoS) traffic prioritization. This switch uses IEEE802.1AB LLDP to automatically discover all the devices (those support LLDP) connected to the network. For more advanced capabilities and easy-to-use graphical tools, such as EPC (Easy-Port-Configuration), it provides preset options for easily configuring each port of the switch. It will make setup easy when operating with IP phones, IP cameras or Wifi APs.

• Strong Security: The switch provides an advanced security and gives you tight control to safeguard the network from unauthorized users. Advanced security features include:

• Secure remote management by supporting SSH, SSL, and SNMPv3 connection which encrypt the packet content at each session.

• Extensive access control lists (ACLs) to restrict sensitive portions of the network from unauthorized users or guests.

• Guest virtual LANs (VLANs) provide Internet connectivity to guests while isolating critical traffic from guest traffic.

• IP Source Guard to prevent datagrams with spoofed addresses from being in the network.

• IEEE802.1X port security to tightly limit access to specific segments of network.

• Video and Voice Support: The switch can be easily configured with the specific VLAN and QoS parameters to prioritize IP Cameras and voice traffic whereas ensure consistent network performance for all services.

• Advanced Network Management Capabilities: As a managed switch, it helps you to use a variety of advanced managing features to manage traffic over your network. Features include:

• Support IPv6: As the IP network addressing scheme evolves to accommodate more devices, Vi3026 supports IPv6, the newest version of the Internet Protocol, as well as the previous IPv4 standard. As the result, you have the ability to move up to the next generation of networking applications without an extensive equipment upgrade.

• Remote management: Using Simple Network Management Protocol (SNMP) and IEEE802.1AB LLDP, you can configure and manage Vi3026 and other Vigitron switches in the network remotely, instead of having to directly connect to them.

• Energy Efficiency: Vi3026 is designed to comply with IEEE802.3az, energy efficient Ethernet protocol, reducing energy costs without compromising performance. Power-saving features include:

• The latest application-specific integrated circuits (ASICs), using low-power technology, allow for lower power consumption and thinner, more efficient designs.

• Embedded intelligence to adjust signal strength based on cable length.

• Expansion Ports: Featuring 20 Gigabit UTP ports, the Vi3026 also offers 4 Combo RJ-45/SFP for a total of 24 ports providing PoE and speeds up to 1Gbps and 2 100/1G SFP ports for uplinks to Fast Ethernet or Gigabit Ethernet fiber optic networks.

Disclaimer No liability is assumed for any misprint or technical change in this document. Pricing and specifications are subject to change without notice. All brand names and trademarks are registered property of Vigitron.

SFP Vi00850MM

The Smart Choice for Transmission Solutions www.vigitron.com

Applications

• Switch-to-Switch interconnect

• High speed wide bandwidth up and downlink

RoHS

Features

• Compliant with Fiber Channel 100-M5-SN-I and 100-M6-SN-I standard

• Compliant with IEEE802.3z Gigabit Ethernet standard

• Industry standard small form pluggable (SFP) package

• Duplex LC connector

• Conforms to MultiSource Agreement for SFP

• Distances of 550m using 50/125um fiber and 300m using 62.5/125 cable

• Single power supply 3.3V

• TTL signal detect indicator

• Hot pluggable

• Class 1 laser product complies with EN 60825-1

850 nm Multi-Mode SX Small Format Pluggable Fiber Transceiver

The Vi00850MM is 850 nanometer SFP transmitting on multimode fiber. Compatible with the MultiSource Agreement (MSA), the Vi00850MM is designed to work with any device conforming to the MSA stanards. Operating on 50/125um fiber cable signals be transmitted up to 550 meters (1815 feet). The Vi00850MM is also compatible with 62.5/125 um fiber for distance of up to 300 meters (990 feet). The Vi00850MM is the perfect solution for interfacing with existing fiber cable installation for single/multiple camera transmission or short haul backbones.

Application Diagram

DSVi00850MM_0915

Vi3026

Vi00850MM

Fiber IP Cameras

Vi3005

Vi1120

SFP

60W PTZ Dome

Vi3005

IP Cameras

Vi3326

Vi2216A

SFP

Data & PoE

Data 60W PoE

Data 60W PoE

Data & PoE UTP

Vi0015

PoE Camera Vi3026/Vi3326

Vi5001

SFPSFP

Fiber Data & PoE

© Copyright 2013 Vigitron, Inc.

Technical Specifications

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com

Electrical Supply Voltage Recommended: 3.1V to 3.5V

Current Operating: 400mA

Signal Detect TTL

Compatible with IEEE 802.3z Gigabit Ethernet Standard

Fiber Type Multi-mode

Transmission Distance 550m using 50/125 um fiber 300m using 62.5/125 um fiber

Transmission Speed 1.25Gbps Ethernet

Wavelength 850nm

Environmental Temperature Operating: 10°C to +70°C Storage: -40°C to +85°C

Mechanical Dimensions 2.2 x .49 x 0.3 in (55.2 x 12.46 x 7.6mm)

Weight 0.035 lbs (15g)

Material Metal Alloy

Accessories 3.3V Single-power supply (optional)

*Specifications subject to change without notice.

**Distances are based on indicated power at the PD input and are obtained using Cat-5e cable, 56V power supply. Factors such as cabling, connections and environmental conditions may affect actual distances and should be taken into consideration.

Part No. Description

Vi00850MM

850MM NM Multi-mode small format pluggable fiber transceiver

Absolute Maximum Ratings

Max

-40

-0.5

°C

MinParameter Units

Output Current

-0.5 mA---

Supply Voltage

Input Voltage

Operating Current ---

Storage Temperature 85

4.0

Vcc

V

V mA

Recommended Operating Conditions

Max

-10

3.1

°C

MinParameter Units

Supply Voltage

Supply Current

Case Operating Temperature 70

3.5

V mA

© Copyright 2013 Vigitron, Inc.

Notes

TEL (+1) 858 - 484 - 5209 • FAX (+1) 858 - 484 - 1205

7810 Trade Street, Suite 100, San Diego, CA 92121, USA • support@vigitron.com • www.vigitron.com

Transmitter Section The transmitter section consists of a 850 nm VCSEL in an eye safe optical subassembly (OSA) which mates to the fiber cable. The laser OSA is driven by a LD driver IC which converts differential input LVPECL logic signals into an analog laser driving current.

TX_DISABLE

The TX_DISABLE signal is high (TTL logic “1”) to turn off the laser output. The laser will turn on when TX_DISABLE is low (TTL logic “0”).

Receiver Section The receiver utilizes a MSM detector integrated with a trans-impedance preamplifier in an OSA. This OSA is connected to a circuit providing post-amplication quantization, and optical signal detection.

Receive Loss (RX_LOS) The RX_LOS is high (logic “1”) when there is no incoming light from the companion transceiver. This signal is normally used by the system for the diagnostic purpose. The signal is operated in TTL level.

8.2

8.4

45.00 55.50

56.60

8.00

1.6

.70

.00

.35

6.25

.40

TX RX

.60

0.4

41.80 + 0.15

0.60 + 0.40 www.illustracameras.com

Features That Make a Difference:

• 2, 3, 5 megapixel resolutions, triple streaming

• True WDR on 2MP/3MP models

• Quick, easy installation and configuration

• One-touch auto focus and motorized zoom

• Multiple motorized lens options

• Gaming mode on 2MP/3MP/5MP models

• IP66 and IK10 rated for weather and vandal-resistance

• Superior low-light performance

• Video intelligence analytics

PRO

IP Mini-Domes

2/3/5MP

Smart Design

Fast Uptime

easier.

Seamless Failover Redundancy

Versatile Lens Options

Superior Performance with Premium Video Quality

Specifications

Field of View

2MP

1.8-3mm 113°/78° 84°/53°

2MP

3-9mm 105°/57° 36°/20°

2MP

9-22mm 34°/19° 14°/8°

3MP and 5MP 1.8-3mm 103°x87° 74°/59°

3MP

3-9mm 88°/64° 30°/22°

3MP

9-22mm 29°/21° 12°/9°

5MP

3-9mm 88°/64° 30°/22°

5MP

9-22mm 29°/21° 12°/9°

Network

WS-Security, SNMP, CIDS, FSTP, UPnP™, SIP Configuration Management

Onboard Storage

Electrical

Physical

Indoor Outdoor

Regulatory

Minimum Illumination

Color B/W With IR (IR Models Only)

2MP

1.8-3mm

2MP

3-9mm

2MP

9-22mm

3MP

1.8-3mm

3MP

3-9mm

3MP

9-22mm

5MP

1.8-3mm

5MP

3-9mm

5MP

9-22mm

2/3/5MP IP Mini-Domes Operational

H.264

MJPEG

2MP

1920x1080@30fps 1920x1080@30fps

3MP

2048x1536@30fps 1920x1440@30fps

5MP

2592x1944@15fps 1920x1440@15fps

ONVIF-Compliant Yes Analog Video Output 1.0 Vp-p, BNC pigtail included Resolution 2MP

(384x216) 16:9

(384x216) 16:9

(384x216) 16:9

3/5MP

Imager 1/3.2˝ CMOS progressive scan Day/Night Yes

1 Outdoor 2MP and 3MP models only.