504-BT specs.pdf
PDF 3 MB Posted
- Attached to
- Z2NA--AMENDMENT 0003 POST RFI ANSWERS AND DOCUMENTS REQUESTED MARTINSBURG VAMC 36C24526Q0341
- Solicitation number
- 36C24526Q0341
About this file
This document is a Bill of Materials and technical specification package for a 500 kW diesel generator set with fuel tank and ancillary equipment for the VA Medical Center (VAMC) Martinsburg Potable Water facility.
The primary equipment consists of a Generac Industrial SD500KG22152D18HPSY2 diesel generator rated at 500 kW, 277/480 VAC three-phase, 60 Hz, featuring a turbocharged/aftercooled 6-cylinder 15.2L engine with permanent magnet excitation and stationary emergency-standby rating. The generator includes a Level 1 acoustic steel enclosure meeting 75 dBA requirements, UL2200 and EPA certification, and SCAQMD compliance. The H-100 digital microprocessor control panel provides NFPA 99 and 110 compliance with dual 4-line x 20 displays, three-phase sensing voltage regulation (±0.25%), RS232/RS485/CANbus remote ports, and comprehensive engine monitoring with programmable I/O and built-in PLC. Additional components include 225 AH Group 8D batteries with charger, 2500W coolant heater, alternator and crankcase heaters, 21-light remote annunciator panel, 600-amp MLCB with electronic trip, and one-hour factory load testing at 0.8 power factor. A Generac 7000 Series 72EE2 bypass automatic transfer switch rated 600A at 480V/60Hz includes selective load disconnect, retransfer selector, strip heater accessory, and Ethernet module with dashboard control. The fuel system comprises a UL-142 listed subbase tank with 3,422 gallons usable capacity (3,521 actual), double-wall secondary containment, emergency vents, fuel level gauge, critical low/high alarms, fuel in basin alarm, locking fill cap, and basin drain. Manufacturer lead times are 10-12 weeks for the generator and 17-19 weeks for the transfer switch, both requiring deposits. The package includes 6-hour field load bank testing and 4-hour owner training during normal business hours.
View the file
Other files
Show all 31
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AutoCAD SHX Text U
AutoCAD SHX Text L
AutoCAD SHX Text R
AutoCAD SHX Text Underwriters
AutoCAD SHX Text Laboratories, Inc.
AutoCAD SHX Text Listed
AutoCAD SHX Text R
AutoCAD SHX Text
MH18481
AutoCAD SHX Text
FILE NO. MH46743
AutoCAD SHX Text
MH25279
AutoCAD SHX Text 2300 S. 51st ST.
AutoCAD SHX Text
MILWAUKEE, WI 53219
AutoCAD SHX Text
PH (414)475-3000 FAX (414) 475-3441
AutoCAD SHX Text www.globalpowercomponents.com
AutoCAD SHX Text
GLOBAL POWER COMPONENTS
AutoCAD SHX Text
NOTES:
AutoCAD SHX Text
1. 3080 GALLONS AT 90% OF USEABLE CAPACITY
AutoCAD SHX Text
QUOTE #
AutoCAD SHX Text
TANK CAPACITY ACTUAL
AutoCAD SHX Text
GENSET MODEL
AutoCAD SHX Text
TANK WEIGHT
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
33106-REV2
AutoCAD SHX Text
3,521 GAL
AutoCAD SHX Text
SD500 15.2L L1 SAE
AutoCAD SHX Text
X LBS
AutoCAD SHX Text
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
AutoCAD SHX Text
GLOBAL POWER COMPONENTS. ANY REPRODUCTION IN PART OR WHOLE WITHOUT
AutoCAD SHX Text
THE WRITTEN PERMISSION OF GLOBAL POWER COMPONENTS IS PROHIBITED.
AutoCAD SHX Text
TANK CAPACITY USEABLE
AutoCAD SHX Text
3,422 GAL
AutoCAD SHX Text
GENSET FOOTPRINT
AutoCAD SHX Text 66.1'' X 154.4''
AutoCAD SHX Text
33106-REV2
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
SHEET 1 OF 1
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
SIZE
AutoCAD SHX Text
SCALE: 1:1
AutoCAD SHX Text
SUBBASE TANK WITH RUPTURE BASIN
AutoCAD SHX Text
DRAWING REFERENCE:
AutoCAD SHX Text
JOB REFERENCE:
AutoCAD SHX Text
CUSTOMER NAME:
AutoCAD SHX Text X
AutoCAD SHX Text
VAMC MARTINSBURG POTABLE WATER GEN
AutoCAD SHX Text
KELLY GENERATOR & EQUIP
AutoCAD SHX Text 7/16/2020
AutoCAD SHX Text
AJF
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
THIRD ANGLE PROJECTION
AutoCAD SHX Text
& STUB UP
AutoCAD SHX Text
REV.
AutoCAD SHX Text
AutoCAD SHX Text ± .1
AutoCAD SHX Text ± .06
AutoCAD SHX Text ± 2°
AutoCAD SHX Text ± .005
AutoCAD SHX Text .X
AutoCAD SHX Text
.XX
AutoCAD SHX Text
THE TOLERANCES ARE:
AutoCAD SHX Text
ONE PLACE
AutoCAD SHX Text
TWO PLACE
AutoCAD SHX Text
ANGLE
AutoCAD SHX Text
HOLE DIA.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED
AutoCAD SHX Text
DIMENSIONS ARE IN INCHES
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
REV.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text
BY
AutoCAD SHX Text
BILL OF MATERIALS
AutoCAD SHX Text
ITEM
AutoCAD SHX Text
PART NUMBER
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
QTY.
AutoCAD SHX Text S
AutoCAD SHX Text
AutoCAD SHX Text
FLANGE, 6", EMERGENCY VENT
AutoCAD SHX Text
AutoCAD SHX Text T
AutoCAD SHX Text 3650R
AutoCAD SHX Text
FLANGE, 2", FUEL RETURN W/ 1/2" DIP TUBE
AutoCAD SHX Text
AutoCAD SHX Text U
AutoCAD SHX Text 3650S
AutoCAD SHX Text
FLANGE, 2", FUEL SUPPLY W/ 1/2" DIP TUBE
AutoCAD SHX Text
AutoCAD SHX Text 700-1065
AutoCAD SHX Text
1/2" SPRING CHECK VALVE
AutoCAD SHX Text
AutoCAD SHX Text V
AutoCAD SHX Text
AutoCAD SHX Text
FLANGE, 2", CRITICAL LOW LEVEL ALARM (SET AT 27-1/4")
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
CRITICAL HIGH LEVEL ALARM (SET AT 2-1/2")
AutoCAD SHX Text
AutoCAD SHX Text X
AutoCAD SHX Text
AutoCAD SHX Text
FLANGE, 2", FUEL LEVEL GAUGE
AutoCAD SHX Text
AutoCAD SHX Text Y
AutoCAD SHX Text
AutoCAD SHX Text
FLANGE, 2", STANDARD VENT CAP
AutoCAD SHX Text
AutoCAD SHX Text Z
AutoCAD SHX Text
AutoCAD SHX Text
FLANGE, 2", LOCKING FILL PORT
AutoCAD SHX Text
AutoCAD SHX Text A
AutoCAD SHX Text
AutoCAD SHX Text
FUEL IN BASIN ALARM
AutoCAD SHX Text
AutoCAD SHX Text B
AutoCAD SHX Text
AutoCAD SHX Text
FLANGE, 1/2", BASIN DRAIN
AutoCAD SHX Text
AutoCAD SHX Text C
AutoCAD SHX Text
AutoCAD SHX Text
1/2" FLUSH MOUNT LIFTING PLATE
AutoCAD SHX Text
AutoCAD SHX Text D
AutoCAD SHX Text
AutoCAD SHX Text
REMOVABLE END PLATE, 3" BEND
AutoCAD SHX Text
AutoCAD SHX Text E
AutoCAD SHX Text
AutoCAD SHX Text
28" STANDARD ELECTRICAL STUB UP AREA
AutoCAD SHX Text
AutoCAD SHX Text G
AutoCAD SHX Text
AutoCAD SHX Text
FLANGE, 2", EXTRA FITTING W/ PLUG
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
6" I-BEAM GENSET SUPPORT
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
GENSET SKIRT W/ STUB UP COVERS
AutoCAD SHX Text
AutoCAD SHX Text
DW-101
AutoCAD SHX Text
DOUBLE WALL SECONDARY CONTAINMENT
AutoCAD SHX Text
PAINT COLOR
AutoCAD SHX Text
GLOSS BLACK (9638)
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
END
AutoCAD SHX Text 139.38
AutoCAD SHX Text 139.38
AutoCAD SHX Text 171.69
AutoCAD SHX Text 171.69
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 230.31
AutoCAD SHX Text 230.31
AutoCAD SHX Text 259.69
AutoCAD SHX Text 259.69
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
END
AutoCAD SHX Text
END
AutoCAD SHX Text
PLATE
AutoCAD SHX Text
PLATE
AutoCAD SHX Text
PLATE
AutoCAD SHX Text Y
AutoCAD SHX Text U
AutoCAD SHX Text V
AutoCAD SHX Text T
AutoCAD SHX Text X
AutoCAD SHX Text
TOP
AutoCAD SHX Text G
AutoCAD SHX Text Z
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text A
AutoCAD SHX Text B
AutoCAD SHX Text
RADIATOR END
AutoCAD SHX Text S
AutoCAD SHX Text S
AutoCAD SHX Text
CUSTOMER
AutoCAD SHX Text
STUB UP AREA
AutoCAD SHX Text C
AutoCAD SHX Text
SIDE
AutoCAD SHX Text 12X
AutoCAD SHX Text
AutoCAD SHX Text
" HOLE
AutoCAD SHX Text
BEAM
AutoCAD SHX Text 16X
AutoCAD SHX Text
AutoCAD SHX Text
" HOLE
AutoCAD SHX Text
BOTTOM
AutoCAD SHX Text
1/4" GUSSETS W/
AutoCAD SHX Text
WING SUPPORTS
vhamwvmoorer Sticky Note Measured inner tank dim:
93"W x 36"H x 243"L
U
AutoCAD SHX Text L
AutoCAD SHX Text R
AutoCAD SHX Text Underwriters
AutoCAD SHX Text Laboratories, Inc.
AutoCAD SHX Text Listed
AutoCAD SHX Text R
AutoCAD SHX Text
MH18481
AutoCAD SHX Text
FILE NO. MH46743
AutoCAD SHX Text
MH25279
AutoCAD SHX Text 2300 S. 51st ST.
AutoCAD SHX Text
MILWAUKEE, WI 53219
AutoCAD SHX Text
PH (414)475-3000 FAX (414) 475-3441
AutoCAD SHX Text www.globalpowercomponents.com
AutoCAD SHX Text
GLOBAL POWER COMPONENTS
AutoCAD SHX Text
QUOTE #
AutoCAD SHX Text
TANK CAPACITY ACTUAL
AutoCAD SHX Text
GENSET MODEL
AutoCAD SHX Text
TANK WEIGHT
AutoCAD SHX Text
APPROVED BY:
AutoCAD SHX Text
DATE:
AutoCAD SHX Text
33106-REV2
AutoCAD SHX Text
3,521 GAL
AutoCAD SHX Text
SD500 15.2L L1 SAE
AutoCAD SHX Text
X LBS
AutoCAD SHX Text
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
AutoCAD SHX Text
GLOBAL POWER COMPONENTS. ANY REPRODUCTION IN PART OR WHOLE WITHOUT
AutoCAD SHX Text
THE WRITTEN PERMISSION OF GLOBAL POWER COMPONENTS IS PROHIBITED.
AutoCAD SHX Text
TANK CAPACITY USEABLE
AutoCAD SHX Text
3,422 GAL
AutoCAD SHX Text
GENSET FOOTPRINT
AutoCAD SHX Text 66.1'' X 154.4''
AutoCAD SHX Text
33106-REV2
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
SHEET 1 OF 1
AutoCAD SHX Text
DWG. NO.
AutoCAD SHX Text
SIZE
AutoCAD SHX Text
SCALE: 1:1
AutoCAD SHX Text
SUBBASE TANK WITH RUPTURE BASIN
AutoCAD SHX Text
DRAWING REFERENCE:
AutoCAD SHX Text
JOB REFERENCE:
AutoCAD SHX Text
CUSTOMER NAME:
AutoCAD SHX Text X
AutoCAD SHX Text
VAMC MARTINSBURG POTABLE WATER GEN
AutoCAD SHX Text
KELLY GENERATOR & EQUIP
AutoCAD SHX Text 7/16/2020
AutoCAD SHX Text
AJF
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DRAWN BY
AutoCAD SHX Text
THIRD ANGLE PROJECTION
AutoCAD SHX Text
& STUB UP
AutoCAD SHX Text
REV.
AutoCAD SHX Text
AutoCAD SHX Text ± .1
AutoCAD SHX Text ± .06
AutoCAD SHX Text ± 2°
AutoCAD SHX Text ± .005
AutoCAD SHX Text .X
AutoCAD SHX Text
.XX
AutoCAD SHX Text
THE TOLERANCES ARE:
AutoCAD SHX Text
ONE PLACE
AutoCAD SHX Text
TWO PLACE
AutoCAD SHX Text
ANGLE
AutoCAD SHX Text
HOLE DIA.
AutoCAD SHX Text
UNLESS OTHERWISE SPECIFIED
AutoCAD SHX Text
DIMENSIONS ARE IN INCHES
AutoCAD SHX Text
REVISIONS
AutoCAD SHX Text
REV.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text
BY
AutoCAD SHX Text
END
AutoCAD SHX Text
TOP
AutoCAD SHX Text
RADIATOR END
SIDE
Spare Ports
Fuel Gauge
Vent w/ Mushroom Cap
Fuel Lock Box with fuel containment
Emergency Vents
H-100 CONTROL PANEL
Part No. 0172110SBY Rev. D 10/18/19
GE
NE
RA
TO
R
CO
NT
RO
LS
Features
The Quiet-Test™ H-100 Control Panel is a digital microprocessor electronic controller that integrates all engine and transfer switch functions into a single control system.
• Digital Controls for All Saftey Shutdowns
• Isochronous Governor Control
• Digital 3 Phase Sensing Voltage Regulator
• Sealed Digital Circuit Board
• Mates with HTS Transfer Switch and Any 2-wire Start ATS
• Alarm and Event Logging
• Built-in Diagnostics
• Internal PLC
| • | Two 4-line x 20 Displays |
| • | Full System Status |
| • | 3 Phase Sensing Digital Voltage Regulator |
| • | Remote Ports |
- RS232
- RS485
- CANbus
| • | Waterproof Connections |
| • | Built -in PLC |
| • | Full Range Standby Operation |
| • | Full System Status |
- 3 Phase AC Volts
- 3 Phase Amps
- kW
- Power Factor
- Reactive Power
- Oil Pressure
- Water Temperature
- Water Level
- Oil Temperature (Optional)
- Fuel Pressure
- Engine Speed
- Battery Voltage
- Alternator Frequency
- Time
- Date
- Transfer Switch Status
- Run Hours
- Service Reminders
- Trending
- Fault History (Alarm Log)
- I2T Function for Full Generator Protection
• Shutdowns
- Overvoltage
- Overspeed
- Low Oil Pressure
- High Coolant Temperature
- Low Coolant Level
| • | Remote Communications |
| • | Configurable to NFPA 110, Level 1 or 2 |
| • | Programmable Auto Crank |
| • | Emergency Stop |
| • | On/Off/Manual Switch |
| • | Not in Auto Flashing Light |
| • | Audible Alarm for Fault Condition |
| • | Transfer Switch Logic Communicates with HTS Transfer Switch |
| • | Selectable Low Speed Exercise |
| • | Temperature Range: -40° to +70°C |
The generator set parameters can be manipulated and monitored without standing in front of the control panel with GenLink® software. The Generac H-100 control panel also monitors and controls transfer switch functions when used with the HTS transfer switch.
| • | Monitors Utility Voltage |
| • | Monitors Generator Voltage |
| • | Timer for Line Interrupt Delay |
| • | Timer for Engine Warmup |
| • | Timer for Minimum Engine Run Time |
| • | Timer for Return to Utility Position |
| • | Timer for Engine Cooldown |
| • | Built-in Exerciser Timer (7 Day) |
| • | Additional 2-wire Start Controls for Any 2-wire Transfer Switch |
12/12/2019 Bill of Materials for VAMC Martinsburg Potable Water Gen
Quantity 1 – Generac Industrial Diesel engine-driven generator set with turbocharged/aftercooled 6-cylinder 15.2L engine, consisting of the following features and accessories:
• Stationary Emergency-Standby rated
• 500 kW Rating, wired for 277/480 VAC three phase, 60 Hz
• Permanent Magnet Excitation
• Level 1 Acoustic Enclosure, Steel o Meets 75 dba requirement.
o Industrial Grey Baked-On Powder Coat Finish
• UL2200
• EPA Certified
• SCAQMD
• H-100 Control Panel o Meets NFPA 99 and 110 requirements o Temp Range -40 to 70 degrees C o Digital Microprocessor:
▪ Two 4-line x 20 displays, full system status
▪ 3 Phase sensing, +/-0.25% digital voltage regulation
▪ RS232, RS485 and Canbus remote ports
▪ Waterproof connections
▪ All engine sensors are 4-20ma for minimal interference
▪ Programmable I/O
▪ Built-in PLC for special applications o Engine function monitoring and control:
▪ Full range standby operation; programmable auto crank, Emergency Stop, Auto-OffManual switch
▪ Isochronous Governor, +/-0.25% frequency regulation
▪ Full system status on all AC output and engine function parameters
▪ Service reminders, trending, fault history (alarm log)
▪ I2T function for full generator protection
▪ Selectable low-speed exercise o HTS transfer switch function monitoring and control o 2-wire start controls for any 2-wire transfer switch
• 21 Light Annunciator – Surface Battery Heating Pad
• Battery Charger, 10 Amp, NFPA 110 compliant, installed
• 225 AH, 1155 CCA Group 8D Batteries, with rack, installed
• Coolant Heater, 2500W, 240VAC
• Remote Emergency Stop Switch, Flush-Mount, shipped loose
• AC/DC Enclosure Interior LED Lighting Kit
• Std set of 3 Manuals
• 120V GFCI and 240V Outlet
• Alternator Strip Heater
• Crankcase Oil Heater
• Flex Fuel Line
• MLCB, 100% rated, LSI Electronic Trip o 600 Amp o Shunt trip and Auxiliary Contacts
• 1 Hour factory load testing at reactive (0.8) power factor
• Standard 2-Year Limited Warranty
• SD0500KG22152D18HPSY2
Products #2
• ATS AMPS: 0600 QTY: 1
o 7000 Series Bypass Transfer Switches
▪ 72EE/72EE2
o Catalog Number
▪ J07ATBB30600N5XP,6DL,31Z,44G 72EE2
o Service Voltage / Hz
▪ 480V/60Hz
• ACCESSORY DESCRIPTIONS
o Accessory Code Description
▪ 1 6DL
• Retransfer to normal mode selector. Maintained two position selector switch permits selection of manual or automatic retransfer. Manual retransfer requires a second selector switch 6B or 6C be momentarily closed to initiate a retransfer to the normal source. While in manual retransfer mode if an emergency source failure should occur and the normal source is still available manual retransfer will be automatically bypassed. A pilot light indicates manual retransfer mode.
▪ 2 31Z
• Selective Load disconnect circuit to provide a pre-transfer and/or post transfer signal when transferring from emergency to normal and/or normal to emergency.
The signal can be programmed to occur during all transfers or only when the transfer is occurring between two live sources. The length of the pre and post transfer delays can be set to 0-5 minutes 59 seconds.
▪ 3 44G 208-240VAC and or 440-480VAC Accessory 44 Strip heater is designed to keep humidity and or temperature within the ATS enclosure at acceptable levels. This accessory consists of a mounting bracket with strip heater, thermostat and terminal block.
▪ 4 72EE2
• 5170 Quad-Ethernet Module provides transfer switch dashboard screen with password protected control capabilities, email alerts and open protocol support in a single module with an integrated 4 port Ethernet switch.
• Product #3 o ITEM QTY: 1
▪ Product Number
▪ 5310 Annunciator Assy 1 CH.
▪ Connects directly to an Ethernet network.
▪ Connects directly to a transfer switch accessory 72EE/72EE2.
• Product #4 o UL-142 Listed Sub Base Fuel Tank o SB2S-3300 Usable Gallons (3000 usable at 90% full) o 36''H x 102''W x 292''L 8,125# o 1 DW-101 Double Wall Secondary Containment o 1 4000 Standard Electrical Stub Up Area 28" o 1 8001 Removable End Plate o 1 3650 1/2" Supply/Return Dip Tube Package (2" NPT) o 1 4306 Fuel in Basin Alarm (Side Mounted) o 1 3502 Basin Drain, 1/2" NPT o 1 1003 Rochester Fuel Level Gauge (2" NPT, Swing Arm) o 1 3005 Locking Manual Fill Cap (2" NPT) o 1 3152 Standard Vent Cap (2" NPT) o 4 3166 Emergency Vent (6" NPT) o 6 8303 6" I-Beam Generator Set Support o 1 4004 Genset Skirt w/Steel Covers Over Exposed Stub Up o 4 8410 Flush Mount Lifting Plate (Minimum of 4) o 1 Black-Gloss Paint Color Gloss Black (9638) o 2 3195 Extra Fitting w/Plug (2" NPT) Spares o 1 700-1065 Spring Check Valve, 1/2" NPT for supply line to engine o Options Included o 1 1005 Critical Low Level Alarm (2" NPT, Set at 25%) o 1 1020 Critical High Level Alarm (2" NPT, Set at 95%)
6-hour Load Bank Test during normal business hours in the field.
4-hour Owner Training during normal business hours – This is to be scheduled separately from start-up of load banking. It is the electrical contractors’ responsibility to schedule the required personnel to be there.
*QUOTE PREPARED WITHOUT SPECIFICATIONS OR DRAWINGS
Current manufacturer’s lead time for the generator is 10 to 12 weeks ARO and Deposit.
Current manufactuer’s lead time for ATS is 17 to 19 weeks ARO and Deposit.
This lead time is subject to change at any time by the factory.
21 LIGHT REMOTE ANNUNCIATOR AND REMOTE RELAY PANEL
Part No. 0604160SSD Rev. E 06/13/19
GE
NE
RA
TO
R
CO
NT
RO
LS
The Remote Annunciator Panel provides remote monitoring and annunciation of up to 18 generator parameters using LEDs located on the annunciator keypad. It also provides two system level warnings which are System Ready and Communications OK.
The Relay Panel has up to 8 selectable functions on form A relays; multiple relay panels can be connected for all 18 generator parameters.
The specific faults can be selected using either the DIP switches located on the annunciator circuit board or through a computer via the RS232 connection on the circuit board. All relays are energized on power up and open during a fault condition.
Communication is via a RS485 serial data link and power is supplied by the generator battery (+12 VDC or +24 VDC).
The Remote Annunciator Panel complies with NFPA 99 and
NFPA 110.
Environmental Specifications:
Operating Temperature .................................................................................................................................................................... -25 ºC to 60 ºC Humidity.......................................................................................................................................................................... 0 to 95% Non-Condensing Power Supply ............................................................................................................................................ Generator Battery, +12 or +24 Volts DC Power Usage..................................................................................................................................................................................... 6 WattsTypical Communication Line...................................................................................................................RS485 Fully Isolated Twisted Pair Cable with Shield Maximum Cable Length................................................................................................................................................................................4,000 ft Relay Output............................................................................One NO Contact (Energized when Annunciator is Powered and No Faults are Present) Relay Contact Rating............................................................................................................................................................................. 30 VDC, 1 A Enclosure Rating..........................................................................................................................................................................................NEMA 1 Alarm Horn (Remote Annunciator Panels Only)................................................................................................................................ 90 dB @ 10 cm
Model 0054650 Gray Remote Annunciator Panel without Relays Model 0054660 Gray Remote Relay Panel without LEDs and Keypad (Relays Only) Model 0054640 Gray Remote Annunciator Panel with 8 Relays Model 0056370 Tan Flush Mount Enclosure without Annunciator Model 0066950 Gray Flush Mount Enclosure without Annunciator
Description:
2.15 bsummerlin Highlight bsummerlin Highlight
ULR
Underwriters Laboratories, Inc.
Listed
R
MH18481
FILE NO. MH46743
MH25279
2300 S. 51st ST.
MILWAUKEE, WI 53219
PH (414)475-3000 FAX (414) 475-3441
www.globalpowercomponents.com
GLOBAL POWER COMPONENTS
18.91 64.19
102 BEAM
FLANGE
99 1.5
END
END
PLATE
LIP
17.81
TYP
.5
.3
BE
A
M
.6
BE
B
EA
.3
BE
.6
BE
B
EA
6.5 21
21.5
59.25 Y
UV T X
TOP
G Z
D
E
A
B
2X 10 GA STUB
UP COVER
RA
D
IA
TO
R
EN
D
S
S
CUSTOMER
STUB UP AREA
TYP
.8
.1
.8
.1
.3
.6
.3
.6
C
SIDE
12X 15
16" HOLE
BEAM
16X 15
16" HOLE
BOTTOM
1/4" GUSSETS W/
WING SUPPORTS
NOTES:
1. 3080 GALLONS AT 90% OF USEABLE CAPACITY
REVISIONS
REV. DESCRIPTION DATE BY
1 INCREASED TANK HEIGHT TO 37" 4/22/20 AJF
BILL OF MATERIALS
ITEM PART NUMBER DESCRIPTION QTY.
S 3166 FLANGE, 6", EMERGENCY VENT 4
T 3650R FLANGE, 2", FUEL RETURN W/ 1/2" DIP TUBE 1
U
3650S FLANGE, 2", FUEL SUPPLY W/ 1/2" DIP TUBE 1
700-1065 1/2" SPRING CHECK VALVE 1
V
1005 FLANGE, 2", CRITICAL LOW LEVEL ALARM (SET AT 27-1/4") 1
1020 CRITICAL HIGH LEVEL ALARM (SET AT 2-1/2") 1
X 1003 FLANGE, 2", FUEL LEVEL GAUGE 1
Y 3152 FLANGE, 2", STANDARD VENT CAP 1
Z 3005 FLANGE, 2", LOCKING FILL PORT 1
A 4306 FUEL IN BASIN ALARM 1
B 3502 FLANGE, 1/2", BASIN DRAIN 1
C 8410 1/2" FLUSH MOUNT LIFTING PLATE 4
D 8003 REMOVABLE END PLATE, 3" BEND 1
E 4000 28" STANDARD ELECTRICAL STUB UP AREA 1
G 3195 FLANGE, 2", EXTRA FITTING W/ PLUG 2
8303 6" I-BEAM GENSET SUPPORT 6
4004 GENSET SKIRT W/ STUB UP COVERS 1
DW-101 DOUBLE WALL SECONDARY CONTAINMENT
PAINT COLOR GLOSS BLACK (9638)
JOB # TANK CAPACITY ACTUAL GENSET MODELTANK WEIGHT
APPROVED BY: DATE:33106 3,521 GAL SD500 15.2L L1 SAE 7,850 LBS
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
GLOBAL POWER COMPONENTS. ANY REPRODUCTION IN PART OR WHOLE WITHOUT
THE WRITTEN PERMISSION OF GLOBAL POWER COMPONENTS IS PROHIBITED.
TANK CAPACITY USEABLE
3,422 GAL
GENSET FOOTPRINT
66.1'' X 154.4''
15-33106B
DESCRIPTION
SHEET 2 OF 6
DWG. NO.SIZE
SCALE: 1:36
SUBBASE TANK WITH RUPTURE BASIN
DRAWING REFERENCE:
JOB REFERENCE:
CUSTOMER NAME:
X
VAMC MARTINSBURG POTABLE WATER GEN
KELLY GENERATOR & EQUIP 12/17/2019
DBP
DATE
DRAWN BY
THIRD ANGLE PROJECTION
& STUB UP
REV. 1
± .1 ± .06 ± 2° ± .005
.X
.XX
THE TOLERANCES ARE:
ONE PLACE
TWO PLACE
ANGLE
HOLE DIA.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
2.5, B, 2
Rectangle
Laboratories, Inc.
Listed
R
MH18481
FILE NO. MH46743
MH25279
2300 S. 51st ST.
MILWAUKEE, WI 53219
PH (414)475-3000 FAX (414) 475-3441
www.globalpowercomponents.com
GLOBAL POWER COMPONENTS
ISO VIEW
15-33106B
DESCRIPTION
SHEET 3 OF 6
DWG. NO.SIZE
SCALE: 1:22
JOB # APPROVED BY: DATE:33106
SUBBASE TANK WITH RUPTURE BASIN
ISO VIEW
DRAWING REFERENCE:
JOB REFERENCE:
CUSTOMER NAME:
X
VAMC MARTINSBURG POTABLE WATER GEN
KELLY GENERATOR & EQUIP 12/17/2019
DBP
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
GLOBAL POWER COMPONENTS. ANY REPRODUCTION IN PART OR WHOLE WITHOUT
THE WRITTEN PERMISSION OF GLOBAL POWER COMPONENTS IS PROHIBITED.
1REV.
THIRD ANGLE PROJECTION
± .1 ± .06 ± 2° ± .005
.X
.XX
THE TOLERANCES ARE:
ONE PLACE
TWO PLACE
ANGLE
HOLE DIA.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
2.5 B
Laboratories, Inc.
Listed
R
MH18481
FILE NO. MH46743
MH25279
2300 S. 51st ST.
MILWAUKEE, WI 53219
PH (414)475-3000 FAX (414) 475-3441
www.globalpowercomponents.com
GLOBAL POWER COMPONENTS
0K1606-SD500-15.2L-REV-F-AJF-040920150K1606-SD500-15.2L-REV-F-AJF-04202020
END
332.05
0K1606-SD500-15.2L-REV-F-AJF-04092015 0K1606-SD500-15.2L-REV-F-AJF-042020200K1606-SD500-15.2L-REV-F-AJF-04202020
TOP
RA
D
IA
TO
R
EN
D
123.01
0K1606-SD500-15.2L-REV-F-AJF-04092015
0K1606-SD500-15.2L-REV-F-AJF-04202020
SIDE
JOB # TANK CAPACITY ACTUAL GENSET MODELTANK WEIGHT
APPROVED BY: DATE:33106 3521 GAL SD500 15.2L L1 SAE 7850 LBS
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
GLOBAL POWER COMPONENTS. ANY REPRODUCTION IN PART OR WHOLE WITHOUT
THE WRITTEN PERMISSION OF GLOBAL POWER COMPONENTS IS PROHIBITED.
TANK CAPACITY USEABLE
3422 GAL
GENSET FOOTPRINT
66.1'' X 154.4''
15-33106B
DESCRIPTION
SHEET 6 OF 6
DWG. NO.SIZE
SCALE: 1:36
SUBBASE TANK WITH RUPTURE BASIN
DRAWING REFERENCE:
JOB REFERENCE:
CUSTOMER NAME:
X
VAMC MARTINSBURG POTABLE WATER GEN
KELLY GENERATOR & EQUIP 12/17/2019
DBP
THIRD ANGLE PROJECTION
& STUB UP
REV. 1
± .1 ± .06 ± 2° ± .005
.X
.XX
THE TOLERANCES ARE:
ONE PLACE
TWO PLACE
ANGLE
HOLE DIA.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
| 7.17.2020 Meeting |
| 15-33106-REV2-QUOTE |
| Sheets and Views |
| Model |
| 15-33106-REV2-QUOTE-ASSEMBLY |
| Sheets and Views |
| Model |
| Transmittal #138 Engine Generators REVISION #3 |
| Transmittal #138 Engine Generators REVISION #3 |
| Generator Issue Responses |
| Battery Charge |
| Generator Issue Responses |
| Cover Letter |
| Generator Issue Responses |
| Questions from VA Rev. 1 |
| Questions from VA |
| Prototype Certificate |
| Level 1 Air Intake and Exhaust |
| GENERATOR INFORMATION REVISED |
| Typical Fuel Tank Vents and Fill |
0172110SBY (3)
| vamc_martinsburg_-_matoc_-_upgr-submittal#2-rev-2-engine_generator_revision_#2-202007081658 |
| Transmittal #138 Engine Generators REVISION #2 |
| 263213-2.1 Engine Generators |
| Re-Submittal for Approval VAMC Martinsburg with updated tank |
| 0197890SSD (4) |
| Re-Submittal for Approval VAMC Martinsburg with updated tank |
| Sheet 1 |
| Views |
| new_view_5 |
| top_6 |
| left_7 |
| left_8 |
| Sheet 2 |
| Views |
| new_view_1 |
| Sheet 3 |
| Sheet 1 |
| Views |
| new_view_4 |
| right_5 |
| top_6 |
| Generac Power Systems 2 Year (2B) Limited Warranty forIndustrial Standby Generators |
| Tank Re-Submittal fo Approval VAMC Potable Water.pdf |
| APPROVAL |
| Drawing View43 |
| Drawing View44 |
| Drawing View45 |
| ISO |
| Drawing View11 |
| 15-33106-SD500 15.2L L1 SAE-3300GAL-REV1-ASSEMBLY.PDF |
| ASSEMBLY |
| Drawing View46 |
| Drawing View47 |
| Drawing View48 |
File details come from the government source that posted it. Updated .