25-0051 SID.pdf

interior design within

G70 BEQ Replacement CL

Marine Corps Base, Camp Lejeune, NC Structural Interior Design Package Sealed Final Submittal May 2026

G703 BEQ Renovation CL Marine Corps Base, Camp Lejeune, NC Structural Interior Design Package interior design within

Table of Contents

1. Point of Contact List

2. SID Narrative

3. Meeting Minutes

4. Finish Plans & Schedules

5. Finish Boards

Structural Interior Design Package interior design within

Point of Contact List Base Architectural Supervisor Cathy Martin Architectural Design Branch Public Works Division G-F, Marine Corps Base, Camp Lejeune

(910) 451-0394 catherine.martin@usmc.mil

A&E Interior Designer Jamie Kissel, NCIDQ Within Interior Design 1008 Granby Street Norfolk, VA 23510

(757) 224-0489 jkissel@withindesigns.com

A&E Project Manager John Schmeid MBF Architects 317-C Pollock Street New Bern, NC 28560

(252) 637-6373 schmeid@mbfarchitects.com

Structural Interior Design Package interior design within

SID Narrative

INTERIOR DESIGN CRITERIA

Interior Design work will comply with the latest edition of the following codes and standards:

FC 1-300-09N Navy & Marine Corps Design Requirements UFC 1-200-01 DoD Building Code UFC 3-120-01 Design: Sign Standards UFC 3-120-10 Interior Design UFC 3-190-06 Protective Coatings and Paints

INTERIOR BASIS OF DESIGN

This Basis of Design Narrative outlines the proposed Structural Interior Design requirements for Repairs to BEQ G703 at United States Marine Corps Base, Camp Lejeune. The interior finishes are the most exposed interior elements in a building and must be durable to withstand the daily traffic and demands of the environment. To meet these objectives, the SID package will use all the general requirements for interior finishes that have been applied in similar facilities recently constructed at MCB Camp Lejeune, as well as best practices recommended by manufacturers for areas requiring enhanced durability. Structural finishes in accordance with the following guidelines will provide longevity and timeless aesthetics without compromising the functional integrity of the facility.

Finishes will be selected because of their high durability and low maintenance requirements.

Squad bays, common areas, and private offices will receive epoxy resinous flooring. Porcelain tile will cover the floors in the head/shower rooms. The laundry room and corridors on all floors will receive a standard resinous flooring.

Interior partitions will be painted CMU & drywall. Accent walls painted in geometric shapes will be used in the Squad Bays to break up the large open spaces and provide visual variety. Offices will recieve a solid accent wall while toilet rooms will recieve porcelain tile with a glazed ceramic tile accent band. All wall finishes will be cohesive to adjacent spaces and provide a fresh and upgraded look. Drywall and exposed ceilings will also have a painted finish.

Interior signage will be provided throughout the facility to form a well-organized, comprehensive interior environment that guides users and visitors through the building. Interior Signage will include identification, directional, and informational systems utilizing permanent and changeable signage.

Structural Interior Design Package interior design

Meeting Minutes interior design

1 | P a g e

1008 Granby Street | Norfolk, VA 23510 | 757.224.0489

MEETING MINUTES

Project: Repair BEQ G703 Meeting: 50% Review Meeting Date: December 2nd, 2025 Location: Microsoft Teams Meeting

PROJECT TEAM IN ATTENDANCE:

Architecture MBF Architects (252) 637-6373 Civil Engineer Avolis Engineering (252) 633-0068 Structural Engineer Kaydos-Daniels Engineers (919) 828-4966 Mechanical/Electrical/Plumbing Crenshaw Consulting (919) 871-1070 Fire Protection Jensen Hughes (757) 213-6856 Cost Estimating Aiken Cost Consultants (864) 232-9342 Geotechnical ECS Southeast (919) 861-9910 Interior Design Within Interior Design (757) 224-0489

Below are the items that were addressed at the 50% Review Meeting.

50% REVIEW COMMENTS

REVIEWER: DANNY MISHOE

Item #19 I-102 & I-601: Change finish in Telecom Rm 202 to same as 106: SC-1, RB-1, PNT-1, PNT- 2(Exposed)

Response: Concur. Finishes will be updated.

Item #20 I-112: Update all I-XXX prints to show Telecom Rm 202

Response: Concur. Room numbers will be updated.

ACTION ITEMS

1. 95% Submittal due to government on 1/26/26.

INTERIOR DESIGN

1 | P a g e

1008 Granby Street | Norfolk, VA 23510 | 757.224.0489

MEETING MINUTES

Project: Repair BEQ G703 Meeting: Prefinal Review Meeting Date: April 7th, 2026 Location: 1005 Michael Road, Camp Lejeune, NC.

PROJECT TEAM IN ATTENDANCE:

Architecture MBF Architects (252) 637-6373 Civil Engineer Avolis Engineering (252) 633-0068 Structural Engineer Kaydos-Daniels Engineers (919) 828-4966 Mechanical/Electrical/Plumbing Crenshaw Consulting (919) 871-1070 Fire Protection Jensen Hughes (757) 213-6856 Cost Estimating Aiken Cost Consultants (864) 232-9342 Geotechnical ECS Southeast (919) 861-9910 Interior Design Within Interior Design (757) 224-0489

Below are the items that were addressed at the Prefinal Review Meeting.

GENERAL NOTES

• Counter vs. Wall Mounted Trough Sinks – sinks currently specified are stainless steel and tamper proof.

o A separate shelf will be provided at each sink

• Laundry Sinks:

o Users prefer floor mounted mop sinks in Janitor’s Closet’s.

• Laundry Rooms:

o Folding Area – folding tables should be added next to mop hanging station and outside of door 120E.

Folding Counters will consist of a support wall, with space under the counter for mop bucket storage.

PREFINAL REVIEW COMMENTS

REVIEWER: TREVOR STREETER

ID #2103251 Sheet I-101: G702 and G703 Do the showers in both/all central baths have the first two needing tile on the floor? As opposed to a solid-surface pan? Are all the showers to be tiled on the shower floors?

Response: Concur. Finishes will be updated.

ID #2103256 Sheet I-111: G702 and G703 Fix double pasting of double doors leading to exterior stairwells.

INTERIOR DESIGN

2 | P a g e

1008 Granby Street | Norfolk, VA 23510 | 757.224.0489

Response: Concur. Extra door has been removed.

ID #2103260 Sheet I-201: G702 and G703 The heights of the accent paints shaped like half-doors have so many heights and thicknesses to them that vary by just a few inches, down to a single inch. Create a rhyme and reason for the shapes and sizes. For example, the difference between two shapes that meet, varies from 15", to 14", to 10" between their heights, creating a non-rhythmic look. The widths are also varied, 23" to 21" on some elevations, while others are called at 21" and 21", sharing the same proportions. If proportions are to be the same, if thickness are supposed to be nominal, if colors are supposed to be rhythmic, then create a more stringent design on the accent wall that reflects the 3 colors chosen as accents, with respect to proportions and scale. Walking through a doorway that has the same shape and same color painted on it, but showing a 2-3" shorter shape is going to be an eyesore. Consider 4 nominal sizes, small, medium, medium large, and large to reflect throughout the space. Use the same thicknesses for each shape defined, ensure that these do not vary and are rigid to the defined dimension.

Response: Concur. Extra door has been removed.

ID #2103261 Sheet I-601: G702 and G703 Should the mechanical room 104 be a RES flooring? I imagine being a mechanical room, it should be SC-1, double check this.

Response: Concur. This room has been updated to show the correct floor finish.

ID #2103266 Sheet I-601: G702 and G703 Entry for 121C is labeled as "room" but has seemingly no function or location on the plans, consider removing this row of boxes from the finish schedule.

Response: Concur. This room has been removed.

ID #2103268 Sheet I-601: G702 and G703 Is there a reason why half of the storage rooms have RES-

1 as the flooring and the other half have SC-1? Shouldn't all of these have the same flooring so the subcontractor doesn't get his wires crossed when ordering/installing?

Especially with all the rooms sharing the same function, just was wondering if there was a reason. The base moulding should also reflect the final choice in flooring for the storage rooms.

Response: Concur. Correction has been made. All Storage rooms will have concrete floors and rubber bases.

ID #2103270 Sheet I-601: G702 and G703 Storage room 115 shows having an accent wall painted, none of the other storage rooms show this to be the case. Unless for a specific reason, have the paint in this room be only PNT-1, just like the other storage rooms.

Response: Concur. Error has been corrected.

ACTION ITEMS

1. Final Submittal due to the Government on 4/27/26.

Structural Interior Design Package interior design

Finish Plans & Schedules

COMM

ELEC

WOMEN

MEN

STORAGE

VESTIBULE

DUTY

MECH

STAIR

CENTRAL

BATH

121A

CENTRAL

BATH

121B

JAN.

122B

MECH

123B

CORRIDOR

120B

CORRIDOR

120A

JAN.

122A

MECH

123A

DUTY

124A

DUTY

125A

SLEEPING

ROOM

127A

CLOSET

126A

DUTY

124B

DUTY

125B

SPRINKLER

RISER

126B

SLEEPING

ROOM

127B

CORRIDOR

CORRIDOR

OFFICE

OFFICE

STORAGE

MECHANICAL

STORAGE

LOUNGE/MEETING

LAUNDRY

EXTERIOR

STAIRS

129B

EXTERIOR

STAIRS

129A

I-202

B1

PNT-3

--I-201

A1

I-201

C1

I-201

B1

I-201

B2I-202

B2

I-401 B6

FLOOR FINISH LEGEND

T-1

T-4

RES-1

SC-1

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:1

AM

I-101

APG

JDK

JDK REPAIR BEQ G703

FIRST FLOOR FINISH PLAN

60043509 N40085-25-B-0051

SCALE: 1/8" = 1'-0"A1 1ST FLOOR FINISH PLAN

FINISH NOTES

A. FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY COLOR, PATTERN, TEXTURE AND

SALIENT CHARACTERISTICS ONLY. THE LISTING OF

MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT

THE SELECTION OF PRODUCTS PROVIDED BY OTHER

MANUFACTURERS. PRODUCTS MEETING THESE CRITERIA

WILL BE CONSIDERED AND MUST BE REVIEWED BY THE

INTERIOR DESIGNER OF RECORD (IDOR) AND THE NAVFAC

INTERIOR DESIGNER AND APPROVED BY THE

CONTRACTING OFFICER.

B. FINISH ITEMS ARE NOT TO BE SUBSTITUTED DUE TO

ORDERING LEAD TIMES. IT IS THE CONTRACTOR ’S

RESPONSIBILITY TO ORDER ALL MATERIALS IN TIME TO

AVOID DELAYS.

C. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL

DRAWINGS AND CONSTRUCTION MANAGER. INSTALL

THERMOSTATS NEAR A CORNER OF THE ROOM OR BY

LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

FINISH NOTES

I. ROOMS IDENTIFIED TO RECEIVE TILE ON WALLS MUST

INCLUDE METAL TRANSITIONS ON ALL OUTSIDE AND INSIDE

CORNERS AS WELL AS THE INTERSECTION BETWEEN

FLOOR AND WALL TILE WHERE APPLICABLE FOR A

COMPLETE INSTALLATION.

J. ALL WALLS TO BE PAINTED (PNT-1) UNLESS OTHERWISE

INDICATED. ALL HOLLOW METAL DOORS AND DOOR

FRAMES TO BE PAINTED (PNT-3). ALL GWB & EXPOSED

CEILINGS TO BE PAINTED (PNT-2).

K. ALL WINDOW SILLS TO BE SOLID SURFACE (SS-2).

L. ALL SHOWER FLOORS AND SHOWER WALLS TO BE SOLID

SURFACE (SS-3).

M. ALL TOILET PARTITIONS TO BE HDPE FINISH (HDP-1).

N. ALL INTERIOR WOOD DOORS TO BE (WD-1).

O. ALL FLOOR TILE TO RECEIVE GROUT FINISH (GR-1). ALL

WALL TILE TO RECEIVE GROUT FINISH (GR-2).

P. EXTERIOR WALLS MUST BE CLEANED AND REPAINTED TO

MATCH EXISTING CONDITIONS.

Q. SEE I-601 FOR FINISH LEGEND.

FINISH NOTES

D. ALL INTERIOR FINISHES IN VERTICAL EXIT WAYS, EXIT

LOBBIES, AND EXIT CORRIDORS MUST MEET MINIMUM

CLASS A RATING.

E. ALL MATERIALS/PRODUCTS ARE TO BE INSTALLED PER

MANUFACTURER'S INSTALLATION REQUIREMENTS

F. SPRAY PAINT ELECTRICAL PANELS, ACCESS PANELS, AND

EXPANSION JOINTS TO MATCH THE ADJACENT WALL

COLOR. PANELS PAINTED BY BRUSH ARE NOT

ACCEPTABLE

G. ALL FLOORING TRANSITIONS MUST MEET ABA GUIDELINES.

FLOORING TRANSITIONS OCCURRING UNDER DOORS MUST

BE CENTERED UNDER DOOR.

H. INSTALL CORNER GUARDS (CG-1) ON ALL OUTSIDE

CORNERS. INSTALL END WALL PROTECTORS AT OPEN

ENDED WALLS. CORNER GUARDS AND END CAPS MUST BE

FULL HEIGHT AND SHOULD NOT BE USED ON CMU WALLS,

TILED WALLS, OR MANUFACTURED STONE WALLS.

4' 8' 16'0' 1/8" =1'-0"

GRAPHIC SCALE:

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

GN

E No.

VESTIBULE

COMM

STORAGE

STAIR

CENTRAL

BATH

206A

CENTRAL

BATH

206BJAN.

207B

MECH

208B

CORRIDOR

205B

CORRIDOR

205A

JAN.

207A

MECH

208A

DUTY

209A

DUTY

210A

SLEEPING

ROOM

212A

CLOSET

211A

DUTY

209B DUTY

210B

CLOSET

211B

SLEEPING

ROOM

212B

EXTERIOR

STAIRS

214B

EXTERIOR

STAIRS

214A

I-201

A1

I-201

A2

FLOOR FINISH LEGEND

T-1

T-4

RES-1

SC-1

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-102

APG

JDK

JDK REPAIR BEQ G703

SECOND FLOOR FINISH PLAN

60043510 N40085-25-B-0051

SCALE: 1/8" = 1'-0"A1 2ND FLOOR FINISH PLAN

FINISH NOTES

A. FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY COLOR, PATTERN, TEXTURE AND

SALIENT CHARACTERISTICS ONLY. THE LISTING OF

MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT

THE SELECTION OF PRODUCTS PROVIDED BY OTHER

MANUFACTURERS. PRODUCTS MEETING THESE CRITERIA

WILL BE CONSIDERED AND MUST BE REVIEWED BY THE

INTERIOR DESIGNER OF RECORD (IDOR) AND THE NAVFAC

INTERIOR DESIGNER AND APPROVED BY THE

CONTRACTING OFFICER.

B. FINISH ITEMS ARE NOT TO BE SUBSTITUTED DUE TO

ORDERING LEAD TIMES. IT IS THE CONTRACTOR ’S

RESPONSIBILITY TO ORDER ALL MATERIALS IN TIME TO

AVOID DELAYS.

C. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL

DRAWINGS AND CONSTRUCTION MANAGER. INSTALL

THERMOSTATS NEAR A CORNER OF THE ROOM OR BY

LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

FINISH NOTES

I. ROOMS IDENTIFIED TO RECEIVE TILE ON WALLS MUST

INCLUDE METAL TRANSITIONS ON ALL OUTSIDE AND INSIDE

CORNERS AS WELL AS THE INTERSECTION BETWEEN

FLOOR AND WALL TILE WHERE APPLICABLE FOR A

COMPLETE INSTALLATION.

J. ALL WALLS TO BE PAINTED (PNT-1) UNLESS OTHERWISE

INDICATED. ALL HOLLOW METAL DOORS AND DOOR

FRAMES TO BE PAINTED (PNT-3). ALL GWB & EXPOSED

CEILINGS TO BE PAINTED (PNT-2).

K. ALL WINDOW SILLS TO BE SOLID SURFACE (SS-2).

L. ALL SHOWER FLOORS AND SHOWER WALLS TO BE SOLID

SURFACE (SS-3).

M. ALL TOILET PARTITIONS TO BE HDPE FINISH (HDP-1).

N. ALL INTERIOR WOOD DOORS TO BE (WD-1).

O. ALL FLOOR TILE TO RECEIVE GROUT FINISH (GR-1). ALL

WALL TILE TO RECEIVE GROUT FINISH (GR-2).

P. EXTERIOR WALLS MUST BE CLEANED AND REPAINTED TO

MATCH EXISTING CONDITIONS.

Q. SEE I-601 FOR FINISH LEGEND.

FINISH NOTES

D. ALL INTERIOR FINISHES IN VERTICAL EXIT WAYS, EXIT

LOBBIES, AND EXIT CORRIDORS MUST MEET MINIMUM

CLASS A RATING.

E. ALL MATERIALS/PRODUCTS ARE TO BE INSTALLED PER

MANUFACTURER'S INSTALLATION REQUIREMENTS

F. SPRAY PAINT ELECTRICAL PANELS, ACCESS PANELS, AND

EXPANSION JOINTS TO MATCH THE ADJACENT WALL

COLOR. PANELS PAINTED BY BRUSH ARE NOT

ACCEPTABLE

G. ALL FLOORING TRANSITIONS MUST MEET ABA GUIDELINES.

FLOORING TRANSITIONS OCCURRING UNDER DOORS MUST

BE CENTERED UNDER DOOR.

H. INSTALL CORNER GUARDS (CG-1) ON ALL OUTSIDE

CORNERS. INSTALL END WALL PROTECTORS AT OPEN

ENDED WALLS. CORNER GUARDS AND END CAPS MUST BE

FULL HEIGHT AND SHOULD NOT BE USED ON CMU WALLS,

TILED WALLS, OR MANUFACTURED STONE WALLS.

4' 8' 16'0' 1/8" =1'-0"

GRAPHIC SCALE:

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

VESTIBULE

STORAGE

STORAGE

STAIR

CENTRAL

BATH

306A

CENTRAL

BATH

306BJAN.

307B

MECH

308B

CORRIDOR

305B

CORRIDOR

305A

JAN

307A

MECH

308A

DUTY

309A

DUTY

310A

SLEEPING

ROOM

312A

CLOSET

311A

DUTY

309B

DUTY

310B

CLOSET

311B

SLEEPING

ROOM

312B

EXTERIOR

STAIR

314B

EXTERIOR

STAIR

314A

FLOOR FINISH LEGEND

T-1

T-4

RES-1

SC-1

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-103

APG

JDK

JDK REPAIR BEQ G703

THIRD FLOOR FINISH PLAN

60043511 N40085-25-B-0051

SCALE: 1/8" = 1'-0"A1 3RD FLOOR FINISH PLAN

FINISH NOTES

A. FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY COLOR, PATTERN, TEXTURE AND

SALIENT CHARACTERISTICS ONLY. THE LISTING OF

MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT

THE SELECTION OF PRODUCTS PROVIDED BY OTHER

MANUFACTURERS. PRODUCTS MEETING THESE CRITERIA

WILL BE CONSIDERED AND MUST BE REVIEWED BY THE

INTERIOR DESIGNER OF RECORD (IDOR) AND THE NAVFAC

INTERIOR DESIGNER AND APPROVED BY THE

CONTRACTING OFFICER.

B. FINISH ITEMS ARE NOT TO BE SUBSTITUTED DUE TO

ORDERING LEAD TIMES. IT IS THE CONTRACTOR ’S

RESPONSIBILITY TO ORDER ALL MATERIALS IN TIME TO

AVOID DELAYS.

C. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL

DRAWINGS AND CONSTRUCTION MANAGER. INSTALL

THERMOSTATS NEAR A CORNER OF THE ROOM OR BY

LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

FINISH NOTES

I. ROOMS IDENTIFIED TO RECEIVE TILE ON WALLS MUST

INCLUDE METAL TRANSITIONS ON ALL OUTSIDE AND INSIDE

CORNERS AS WELL AS THE INTERSECTION BETWEEN

FLOOR AND WALL TILE WHERE APPLICABLE FOR A

COMPLETE INSTALLATION.

J. ALL WALLS TO BE PAINTED (PNT-1) UNLESS OTHERWISE

INDICATED. ALL HOLLOW METAL DOORS AND DOOR

FRAMES TO BE PAINTED (PNT-3). ALL GWB & EXPOSED

CEILINGS TO BE PAINTED (PNT-2).

K. ALL WINDOW SILLS TO BE SOLID SURFACE (SS-2).

L. ALL SHOWER FLOORS AND SHOWER WALLS TO BE SOLID

SURFACE (SS-3).

M. ALL TOILET PARTITIONS TO BE HDPE FINISH (HDP-1).

N. ALL INTERIOR WOOD DOORS TO BE (WD-1).

O. ALL FLOOR TILE TO RECEIVE GROUT FINISH (GR-1). ALL

WALL TILE TO RECEIVE GROUT FINISH (GR-2).

P. EXTERIOR WALLS MUST BE CLEANED AND REPAINTED TO

MATCH EXISTING CONDITIONS.

Q. SEE I-601 FOR FINISH LEGEND.

FINISH NOTES

D. ALL INTERIOR FINISHES IN VERTICAL EXIT WAYS, EXIT

LOBBIES, AND EXIT CORRIDORS MUST MEET MINIMUM

CLASS A RATING.

E. ALL MATERIALS/PRODUCTS ARE TO BE INSTALLED PER

MANUFACTURER'S INSTALLATION REQUIREMENTS

F. SPRAY PAINT ELECTRICAL PANELS, ACCESS PANELS, AND

EXPANSION JOINTS TO MATCH THE ADJACENT WALL

COLOR. PANELS PAINTED BY BRUSH ARE NOT

ACCEPTABLE

G. ALL FLOORING TRANSITIONS MUST MEET ABA GUIDELINES.

FLOORING TRANSITIONS OCCURRING UNDER DOORS MUST

BE CENTERED UNDER DOOR.

H. INSTALL CORNER GUARDS (CG-1) ON ALL OUTSIDE

CORNERS. INSTALL END WALL PROTECTORS AT OPEN

ENDED WALLS. CORNER GUARDS AND END CAPS MUST BE

FULL HEIGHT AND SHOULD NOT BE USED ON CMU WALLS,

TILED WALLS, OR MANUFACTURED STONE WALLS.

4' 8' 16'0' 1/8" =1'-0"

GRAPHIC SCALE:

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

S2

S2 S2

S2

S2

S2 S2

S2

S2

S2

S2

S2

S2

S2

S1 S1

S1 S1

S1S1

S1 S1

S2E

S2E

S2E S2E

S3 S3

S3

S4M S4M

S4W

S6

S6S6

S4M

S7

COMM

ELEC

WOMEN

MEN

STORAGE

VESTIBULE

DUTY

MECH

STAIR

CENTRAL

BATH

121A

CENTRAL

BATH

121BJAN.

122B

MECH

123B

CORRIDOR

120B

CORRIDOR

120A

JAN.

122A

MECH

123A

DUTY

124A

DUTY

125A

SLEEPING

ROOM

127A

CLOSET

126A

DUTY

124B

DUTY

125B

SPRINKLER

RISER

126B

SLEEPING

ROOM

127B

CORRIDOR

CORRIDOR

OFFICE

OFFICE

STORAGE

MECHANICAL

STORAGE

LOUNGE/MEETING

LAUNDRY

EXTERIOR

STAIRS

129B

EXTERIOR

STAIRS

129A

S7

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-111

APG

JDK

JDK REPAIR BEQ G703

FIRST FLOOR SIGNAGE PLAN

60043512 N40085-25-B-0051

SCALE: 1/8" = 1'-0"A1 1ST FLOOR SIGNAGE PLAN

SIGNAGE SCHEDULE

TYPE DESCRIPTION QTY

S1 ROOM IDENTIFICATION SIGN 16

S2 PERMANENT ROOM IDENTIFICATION SIGN 30

S2E EXTERIOR ROOM IDENTIFICATION SIGN 5

S3 STAIRWAY LEVEL INDICATOR 9

S4M MENS RESTROOM IDENTIFICATION SIGN 7

S4W WOMENS RESTROOM & SHOWER IDENTIFICATION SIGN 1

S6 STAIR IDENTIFICATION SIGN 5

S7 LARGE DIRECTIONAL SIGN 6

4' 8' 16'0' 1/8" =1'-0"

GRAPHIC SCALE:

SIGNAGE NOTES

A. ALL SIGNAGE TO COMPLY WITH UFC 3 120 01.

B. ALL SIGN TYPES, TEXT WORDING, AND ROOM NUMBERS TO

BE VERIFIED WITH END USER AND REVIEWED BY NAVFAC

INTERIOR DESIGNER PRIOR TO FABRICATION.

C. ALL GRADE 2 BRAILLE TO BE TACTILE RAISED 0.8 MM FROM

THE SURFACE WITH ROUNDED DOTS.

D. SIGNS MUST USE HIGH CONTRAST, NON-GLARE FINISHES.

CHARACTERS MUST BE UPPER CASE AND USE SANS SERIF

FONTS.

E. SIGNS MUST INCLUDE CLEAR VISUAL ELEMENTS FOR

INDIVIDUALS WITH LOW VISION, BLINDNESS AND COGNITIVE

DISABILITIES.

F. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

G. SEE ELEVATION A3 & B3 ON SHEET I-501 FOR MOUNTING

HEIGHT OF ACRYLIC SIGNAGE.

H. REFER TO SHEET I-602 FINISH LEGEND FOR SIGNAGE

FINISHES.

I. MOUNTING OF SIGNAGE SYSTEM MUST INCLUDE SURFACE

MOUNTING WITH SCREW-ON APPLICATION FOR INTERIOR

WALLS.

J. SIGNS THAT MOUNT TO GLASS MUST INCLUDE AN EQUALLY

SIZED BLANK SIGN PANEL ALIGNED TO OPPOSITE SIDE OF

THE GLASS.

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

S1

S1 S1

S2

S2 S2

S2

S2

S2 S2

S2

S3 S3

S3

S6

S7

S4M S4MVESTIBULE

COMM

STORAGE

STAIR

CENTRAL

BATH

206A

CENTRAL

BATH

206BJAN.

207B

MECH

208B

CORRIDOR

205B

CORRIDOR

205A

JAN.

207A

MECH

208A

DUTY

209A

DUTY

210A

SLEEPING

ROOM

212A

CLOSET

211A

DUTY

209B DUTY

210B

CLOSET

211B

SLEEPING

ROOM

212B

EXTERIOR

STAIRS

214B

EXTERIOR

STAIRS

214A

S7

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-112

APG

JDK

JDK REPAIR BEQ G703

SECOND FLOOR SIGNAGE PLAN

60043513 N40085-25-B-0051

SCALE: 1/8" = 1'-0"A1 2ND FLOOR SIGNAGE PLAN

SIGNAGE SCHEDULE

TYPE DESCRIPTION QTY

S1 ROOM IDENTIFICATION SIGN 16

S2 PERMANENT ROOM IDENTIFICATION SIGN 30

S2E EXTERIOR ROOM IDENTIFICATION SIGN 5

S3 STAIRWAY LEVEL INDICATOR 9

S4M MENS RESTROOM IDENTIFICATION SIGN 7

S4W WOMENS RESTROOM & SHOWER IDENTIFICATION SIGN 1

S6 STAIR IDENTIFICATION SIGN 5

S7 LARGE DIRECTIONAL SIGN 6

4' 8' 16'0' 1/8" =1'-0"

GRAPHIC SCALE:

SIGNAGE NOTES

A. ALL SIGNAGE TO COMPLY WITH UFC 3 120 01.

B. ALL SIGN TYPES, TEXT WORDING, AND ROOM NUMBERS TO

BE VERIFIED WITH END USER AND REVIEWED BY NAVFAC

INTERIOR DESIGNER PRIOR TO FABRICATION.

C. ALL GRADE 2 BRAILLE TO BE TACTILE RAISED 0.8 MM FROM

THE SURFACE WITH ROUNDED DOTS.

D. SIGNS MUST USE HIGH CONTRAST, NON-GLARE FINISHES.

CHARACTERS MUST BE UPPER CASE AND USE SANS SERIF

FONTS.

E. SIGNS MUST INCLUDE CLEAR VISUAL ELEMENTS FOR

INDIVIDUALS WITH LOW VISION, BLINDNESS AND COGNITIVE

DISABILITIES.

F. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

G. SEE ELEVATION A3 & B3 ON SHEET I-501 FOR MOUNTING

HEIGHT OF ACRYLIC SIGNAGE.

H. REFER TO SHEET I-602 FINISH LEGEND FOR SIGNAGE

FINISHES.

I. MOUNTING OF SIGNAGE SYSTEM MUST INCLUDE SURFACE

MOUNTING WITH SCREW-ON APPLICATION FOR INTERIOR

WALLS.

J. SIGNS THAT MOUNT TO GLASS MUST INCLUDE AN EQUALLY

SIZED BLANK SIGN PANEL ALIGNED TO OPPOSITE SIDE OF

THE GLASS.

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

S1 S1

S2

S2 S2

S2

S2

S2 S2

S2

S3

S6

S7

S4M S4MVESTIBULE

STORAGE

STORAGE

STAIR

CENTRAL

BATH

306A

CENTRAL

BATH

306BJAN.

307B

MECH

308B

CORRIDOR

305B

CORRIDOR

305A

JAN

307A

MECH

308A

DUTY

309A

DUTY

310A

SLEEPING

ROOM

312A

CLOSET

311A

DUTY

309B

DUTY

310B

CLOSET

311B

SLEEPING

ROOM

312B

EXTERIOR

STAIR

314B

EXTERIOR

STAIR

314A

S3 S3

S7

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-113

APG

JDK

JDK REPAIR BEQ G703

THIRD FLOOR SIGNAGE PLAN

60043514 N40085-25-B-0051

SCALE: 1/8" = 1'-0"A1 3RD FLOOR SIGNAGE PLAN

SIGNAGE SCHEDULE

TYPE DESCRIPTION QTY

S1 ROOM IDENTIFICATION SIGN 16

S2 PERMANENT ROOM IDENTIFICATION SIGN 30

S2E EXTERIOR ROOM IDENTIFICATION SIGN 5

S3 STAIRWAY LEVEL INDICATOR 9

S4M MENS RESTROOM IDENTIFICATION SIGN 7

S4W WOMENS RESTROOM & SHOWER IDENTIFICATION SIGN 1

S6 STAIR IDENTIFICATION SIGN 5

S7 LARGE DIRECTIONAL SIGN 6

4' 8' 16'0' 1/8" =1'-0"

GRAPHIC SCALE:

SIGNAGE NOTES

A. ALL SIGNAGE TO COMPLY WITH UFC 3 120 01.

B. ALL SIGN TYPES, TEXT WORDING, AND ROOM NUMBERS TO

BE VERIFIED WITH END USER AND REVIEWED BY NAVFAC

INTERIOR DESIGNER PRIOR TO FABRICATION.

C. ALL GRADE 2 BRAILLE TO BE TACTILE RAISED 0.8 MM FROM

THE SURFACE WITH ROUNDED DOTS.

D. SIGNS MUST USE HIGH CONTRAST, NON-GLARE FINISHES.

CHARACTERS MUST BE UPPER CASE AND USE SANS SERIF

FONTS.

E. SIGNS MUST INCLUDE CLEAR VISUAL ELEMENTS FOR

INDIVIDUALS WITH LOW VISION, BLINDNESS AND COGNITIVE

DISABILITIES.

F. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

G. SEE ELEVATION A3 & B3 ON SHEET I-501 FOR MOUNTING

HEIGHT OF ACRYLIC SIGNAGE.

H. REFER TO SHEET I-602 FINISH LEGEND FOR SIGNAGE

FINISHES.

I. MOUNTING OF SIGNAGE SYSTEM MUST INCLUDE SURFACE

MOUNTING WITH SCREW-ON APPLICATION FOR INTERIOR

WALLS.

J. SIGNS THAT MOUNT TO GLASS MUST INCLUDE AN EQUALLY

SIZED BLANK SIGN PANEL ALIGNED TO OPPOSITE SIDE OF

THE GLASS.

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

9" 24" 4" 24" 122" 24" 4" 24" 44" 24" 4" 24" 20" 24" 4" 24" 21"

424"

8"

R 2' -0"

R 2'-0"

R 2' -0"

R 2'-0"

R 2' -0"

R 2'-0"

R 2' -0"

R 2'-0"

PNT-3

WD-1

PNT-6

PNT-7

PNT-1

PNT-6

PNT-8

PNT-8

PNT-7

RB-1

PNT-8

PNT-7

OPEN TO

CORRIDOR

5" 24" 4" 24" 24" 24" 4" 24" 14" 24" 4" 24" 19" 158" 16" 24" 8"

424"

8"

R 2'-0" R 2'-0

R 2'-0"

R 2' -0"

R 2'-0"

R 2'-0"

R 2' -0"

PNT-6

PNT-8

PNT-7

PNT-6

PNT-8

PNT-1

PNT-8

RB-1

PNT-1

9"24"4"24"108"24"4"24"49"24"4"24"16"24"4"24"34"

R 2'-0"

R 2'-0"

R 2' -0"

R 2'-0"

R 2' -0

R 2'-0"

R 2'-0"

PNT-1

WD-1

PNT-3

RB-1

PNT-8 PNT-7

PNT-6

PNT-8

PNT-7

PNT-6

PNT-8

PNT-7

OPEN TO

CORRIDOR

8" 24" 16" 19" 24" 4" 24" 15" 24" 4" 24" 23 3/4" 2 3/8"

24" 4" 24" 2"

48" 158" 161 3/4" 56 3/8"

8"

R 2'-0"

R 2'-0"

R 2' -0"

R 2'-0"

R 2'-0"

R 2'-0"

R 2' -0"

PNT-8

PNT-7

PNT-6

PNT-8

PNT-1

RB-1

PNT-6

PNT-8

OPEN TO

CORRIDOR

7" 24" 17" 9"24"4"24"28"24"4"24"14"24"4"24"11"

48" 158" 218"

8"

R 2'-0"

R 2'-0"

R 2'-0"

R 2' -0"

PNT-8

PNT-1

PNT-1

PNT-8

PNT-6

PNT-7

RB-1

PNT-8

PNT-6

R 2'-0"

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-201

APG

JDK

JDK REPAIR BEQ G703

INTERIOR ELEVATIONS

60043515 N40085-25-B-0051

FINISH NOTES

A. FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY COLOR, PATTERN, TEXTURE AND

SALIENT CHARACTERISTICS ONLY. THE LISTING OF

MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT

THE SELECTION OF PRODUCTS PROVIDED BY OTHER

MANUFACTURERS. PRODUCTS MEETING THESE CRITERIA

WILL BE CONSIDERED AND MUST BE REVIEWED BY THE

INTERIOR DESIGNER OF RECORD (IDOR) AND THE NAVFAC

INTERIOR DESIGNER AND APPROVED BY THE

CONTRACTING OFFICER.

B. FINISH ITEMS ARE NOT TO BE SUBSTITUTED DUE TO

ORDERING LEAD TIMES. IT IS THE CONTRACTOR ’S

RESPONSIBILITY TO ORDER ALL MATERIALS IN TIME TO

AVOID DELAYS.

C. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL

DRAWINGS AND CONSTRUCTION MANAGER. INSTALL

THERMOSTATS NEAR A CORNER OF THE ROOM OR BY

LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

FINISH NOTES

I. ROOMS IDENTIFIED TO RECEIVE TILE ON WALLS MUST

INCLUDE METAL TRANSITIONS ON ALL OUTSIDE AND INSIDE

CORNERS AS WELL AS THE INTERSECTION BETWEEN

FLOOR AND WALL TILE WHERE APPLICABLE FOR A

COMPLETE INSTALLATION.

J. ALL WALLS TO BE PAINTED (PNT-1) UNLESS OTHERWISE

INDICATED. ALL HOLLOW METAL DOORS AND DOOR

FRAMES TO BE PAINTED (PNT-3). ALL GWB & EXPOSED

CEILINGS TO BE PAINTED (PNT-2).

K. ALL WINDOW SILLS TO BE SOLID SURFACE (SS-2).

L. ALL SHOWER FLOORS AND SHOWER WALLS TO BE SOLID

SURFACE (SS-3).

M. ALL TOILET PARTITIONS TO BE HDPE FINISH (HDP-1).

N. ALL INTERIOR WOOD DOORS TO BE (WD-1).

O. ALL FLOOR TILE TO RECEIVE GROUT FINISH (GR-1). ALL

WALL TILE TO RECEIVE GROUT FINISH (GR-2).

P. EXTERIOR WALLS MUST BE CLEANED AND REPAINTED TO

MATCH EXISTING CONDITIONS.

Q. SEE I-601 FOR FINISH LEGEND.

FINISH NOTES

D. ALL INTERIOR FINISHES IN VERTICAL EXIT WAYS, EXIT

LOBBIES, AND EXIT CORRIDORS MUST MEET MINIMUM

CLASS A RATING.

E. ALL MATERIALS/PRODUCTS ARE TO BE INSTALLED PER

MANUFACTURER'S INSTALLATION REQUIREMENTS

F. SPRAY PAINT ELECTRICAL PANELS, ACCESS PANELS, AND

EXPANSION JOINTS TO MATCH THE ADJACENT WALL

COLOR. PANELS PAINTED BY BRUSH ARE NOT

ACCEPTABLE

G. ALL FLOORING TRANSITIONS MUST MEET ABA GUIDELINES.

FLOORING TRANSITIONS OCCURRING UNDER DOORS MUST

BE CENTERED UNDER DOOR.

H. INSTALL CORNER GUARDS (CG-1) ON ALL OUTSIDE

CORNERS. INSTALL END WALL PROTECTORS AT OPEN

ENDED WALLS. CORNER GUARDS AND END CAPS MUST BE

FULL HEIGHT AND SHOULD NOT BE USED ON CMU WALLS,

TILED WALLS, OR MANUFACTURED STONE WALLS.

1' 2' 4'0' 1/2" =1'-0"

GRAPHIC SCALE:

SCALE: 1/2" = 1'-0"B1 TYP. SLEEPING BAY PLAN NORTH ACCENT WALL

SCALE: 1/2" = 1'-0"B2 TYP. SLEEPING BAY PLAN SOUTH ACCENT WALL

SCALE: 1/2" = 1'-0"A1 TYP. SLEEPING BAY PLAN NORTH ACCENT WALL

SCALE: 1/2" = 1'-0"C1 SLEEPING BAY 127B PLAN SOUTH ACCENT WALL

SCALE: 1/2" = 1'-0"A2 TYP. SLEEPING BAY PLAN SOUTH ACCENT WALL

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

EQ.26"36"36"36"26"EQ.

4"

SS-1

COUNTERTOP

PLAM-1

CABINETS

CP-1

CABINETS

RB-1

TOE KICK

PNT-3

A1 I-301

_______A2 I-301

C

O U

R

SE

S

C O

U R

SE

S

TO

C

EI

LI

N G

T-3

T-2

TS-5

T-2

B1 I-502

1/8" GROUT

LINES

T-2

TS-7

PNT-1

C

O U

R

SE

S

TS-5

B1

I-502

B3 I-502

1/8" GROUT

LINES

1" 15" 72" 15" 1"

PNT-1

SS-1

COUNTERTOP

CP-1

CABINETS

PLAM-1

CABINETS

RB-1

TOEKICK

HW-1

SUPPORT BRACKET

A2 I-301

_______ A3 I-301

FRP-1

RB-2

A4

I-502

U P

TO

C

EI

LI

N G

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-202

APG

JDK

JDK REPAIR BEQ G703

INTERIOR ELEVATIONS

60043516 N40085-25-B-0051

SCALE: 1/2" = 1'-0"B1 117 LOUNGE/MEETING ELEVATION

SCALE: 1/2" = 1'-0"A1 TYP. RESTROOM TILE ELEVATION

SCALE: 1/2" = 1'-0"A2 TYP. JANITOR TILE ELEVATION

1' 2' 4'0' 1/2" =1'-0"

GRAPHIC SCALE:

FINISH NOTES

A. FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY COLOR, PATTERN, TEXTURE AND

SALIENT CHARACTERISTICS ONLY. THE LISTING OF

MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT

THE SELECTION OF PRODUCTS PROVIDED BY OTHER

MANUFACTURERS. PRODUCTS MEETING THESE CRITERIA

WILL BE CONSIDERED AND MUST BE REVIEWED BY THE

INTERIOR DESIGNER OF RECORD (IDOR) AND THE NAVFAC

INTERIOR DESIGNER AND APPROVED BY THE

CONTRACTING OFFICER.

B. FINISH ITEMS ARE NOT TO BE SUBSTITUTED DUE TO

ORDERING LEAD TIMES. IT IS THE CONTRACTOR ’S

RESPONSIBILITY TO ORDER ALL MATERIALS IN TIME TO

AVOID DELAYS.

C. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL

DRAWINGS AND CONSTRUCTION MANAGER. INSTALL

THERMOSTATS NEAR A CORNER OF THE ROOM OR BY

LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

FINISH NOTES

I. ROOMS IDENTIFIED TO RECEIVE TILE ON WALLS MUST

INCLUDE METAL TRANSITIONS ON ALL OUTSIDE AND INSIDE

CORNERS AS WELL AS THE INTERSECTION BETWEEN

FLOOR AND WALL TILE WHERE APPLICABLE FOR A

COMPLETE INSTALLATION.

J. ALL WALLS TO BE PAINTED (PNT-1) UNLESS OTHERWISE

INDICATED. ALL HOLLOW METAL DOORS AND DOOR

FRAMES TO BE PAINTED (PNT-3). ALL GWB & EXPOSED

CEILINGS TO BE PAINTED (PNT-2).

K. ALL WINDOW SILLS TO BE SOLID SURFACE (SS-2).

L. ALL SHOWER FLOORS AND SHOWER WALLS TO BE SOLID

SURFACE (SS-3).

M. ALL TOILET PARTITIONS TO BE HDPE FINISH (HDP-1).

N. ALL INTERIOR WOOD DOORS TO BE (WD-1).

O. ALL FLOOR TILE TO RECEIVE GROUT FINISH (GR-1). ALL

WALL TILE TO RECEIVE GROUT FINISH (GR-2).

P. EXTERIOR WALLS MUST BE CLEANED AND REPAINTED TO

MATCH EXISTING CONDITIONS.

Q. SEE I-601 FOR FINISH LEGEND.

FINISH NOTES

D. ALL INTERIOR FINISHES IN VERTICAL EXIT WAYS, EXIT

LOBBIES, AND EXIT CORRIDORS MUST MEET MINIMUM

CLASS A RATING.

E. ALL MATERIALS/PRODUCTS ARE TO BE INSTALLED PER

MANUFACTURER'S INSTALLATION REQUIREMENTS

F. SPRAY PAINT ELECTRICAL PANELS, ACCESS PANELS, AND

EXPANSION JOINTS TO MATCH THE ADJACENT WALL

COLOR. PANELS PAINTED BY BRUSH ARE NOT

ACCEPTABLE

G. ALL FLOORING TRANSITIONS MUST MEET ABA GUIDELINES.

FLOORING TRANSITIONS OCCURRING UNDER DOORS MUST

BE CENTERED UNDER DOOR.

H. INSTALL CORNER GUARDS (CG-1) ON ALL OUTSIDE

CORNERS. INSTALL END WALL PROTECTORS AT OPEN

ENDED WALLS. CORNER GUARDS AND END CAPS MUST BE

FULL HEIGHT AND SHOULD NOT BE USED ON CMU WALLS,

TILED WALLS, OR MANUFACTURED STONE WALLS.

CASEWORK NOTES

1. CASEWORK CONSTRUCTION AS INDICATED IN THE

DOCUMENTS MUST BE IN ACCORDANCE WITH A.W.I. QUALITY

STANDARDS FOR FLUSH OVERLAY CONSTRUCTION.

SEMI-EXPOSED SURFACES TO BE CONSTRUCTED USING

CUSTOM GRADE STANDARDS

2. ALL CASEWORK MUST BE IN COMPLIANCE WITH UFGS

SECTION 06 41 16.0 AND SECTION 06 61 1.

3. ALL COUNTERTOP AND BACK/SIDE SPLASHES TO BE SOLID

SURFACE (SS-1). BACK/SIDE SPLASHES ARE ONLY TO BE

APPLIED AT WALLS WITHOUT FULL HEIGHT SPLASH OR TILE.

4. ALL BASE CABINETS, WALL CABINETS, APRONS AND

SHROUDS WILL BE PLASTIC LAMINATE (PLAM-1).

5. ALL BASE CABINET TOE KICKS WILL BE RUBBER BASE (RB-1).

6. SEE SHEET I-601 FOR FINISH LEGEND.

SCALE: 1/2" = 1'-0"B2 DUTY DESK ELEVATION

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

GN

SCALE: 1/2" = 1'-0"A3 TYP. DRYER CHASE ELEVATION

SOLID SURFACE

COUNTERTOP

FULL OVERLAY

FLUSH DOOR

FINISHED IN

HPL

3/4" HPL ADJUSTABLE

SHELF

RECESSED STANDARDS

24"

4"

HPL

INTERIOR

TYP.

1/

2"

/2

4"

3" 21"

STAINLESS STEEL

BAR PULL

RUBBER BASE

AT TOE KICK

24"

4" INTEGRAL

BACKSPLASH

I-502 B4

1/4" CABINET BACK

SOLID SURFACE

COUNTERTOP

1/4" DRAWER

BOTTOM - DADO INTO

DRAWER BACK &

FRONT

INTERIOR

DRAWER BOXES

FINISHED IN HPL

1/4" CABINET BACK

DRAWER FRONTS

FINISHED IN HPL

W/ MATCHING PVC

EDGEBAND

RUBBER BASE

AT TOE KICK

FULL EXTENSION

DRAWER SLIDES

3" 21"

24"

1/ 2"

3/ 8"

3/

4"

1/ 8"

1/

2"

1/ 8"

1/

2"

1/ 8"

9" 4"

4" INTEGRAL

BACKSPLASH 24"

SE

E

EL

EV

AT

IO

N

SOLID SURFACE

COUNTERTOP

HW-1

SUPPORT BRACKET

24"

SE

E

E

LE

VA

TI

O N

1/

2"

24"

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:2

AM

I-301

APG

JDK

JDK REPAIR BEQ G703

CASEWORK SECTIONS

60043517 N40085-25-B-0051

CASEWORK NOTES

1. CASEWORK CONSTRUCTION AS INDICATED IN THE

DOCUMENTS MUST BE IN ACCORDANCE WITH A.W.I. QUALITY

STANDARDS FOR FLUSH OVERLAY CONSTRUCTION.

SEMI-EXPOSED SURFACES TO BE CONSTRUCTED USING

CUSTOM GRADE STANDARDS

2. ALL CASEWORK MUST BE IN COMPLIANCE WITH UFGS

SECTION 06 41 16.0 AND SECTION 06 61 1.

3. ALL COUNTERTOP AND BACK/SIDE SPLASHES TO BE SOLID

SURFACE (SS-1). BACK/SIDE SPLASHES ARE ONLY TO BE

APPLIED AT WALLS WITHOUT FULL HEIGHT SPLASH OR TILE.

4. ALL BASE CABINETS, WALL CABINETS, APRONS AND

SHROUDS WILL BE PLASTIC LAMINATE (PLAM-1).

5. ALL BASE CABINET TOE KICKS WILL BE RUBBER BASE (RB-1).

6. SEE SHEET I-601 FOR FINISH LEGEND.

SCALE: 1 1/2" = 1'-0"A1 SECTION - BASE CABINET

SCALE: 1 1/2" = 1'-0"A2 SECTION - 4 DRAWER BASE CAB.

4"0' 1 1/2" =1'-0"

GRAPHIC SCALE:

8" 1'-4"

SCALE: 1 1/2" = 1'-0"A3 SECTION - OPEN BASE

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

FLOOR FINISH LEGEND

T-1

T-4

RES-1

SC-1

MECHANICAL

MECHANICAL

S2E

I-202A3 A3

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:3

AM

I-401

APG

JDK

JDK REPAIR BEQ G703

ENLARGED PLANS

60043518 N40085-25-B-0051

FINISH NOTES

A. FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY COLOR, PATTERN, TEXTURE AND

SALIENT CHARACTERISTICS ONLY. THE LISTING OF

MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT

THE SELECTION OF PRODUCTS PROVIDED BY OTHER

MANUFACTURERS. PRODUCTS MEETING THESE CRITERIA

WILL BE CONSIDERED AND MUST BE REVIEWED BY THE

INTERIOR DESIGNER OF RECORD (IDOR) AND THE NAVFAC

INTERIOR DESIGNER AND APPROVED BY THE

CONTRACTING OFFICER.

B. FINISH ITEMS ARE NOT TO BE SUBSTITUTED DUE TO

ORDERING LEAD TIMES. IT IS THE CONTRACTOR ’S

RESPONSIBILITY TO ORDER ALL MATERIALS IN TIME TO

AVOID DELAYS.

C. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL

DRAWINGS AND CONSTRUCTION MANAGER. INSTALL

THERMOSTATS NEAR A CORNER OF THE ROOM OR BY

LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

FINISH NOTES

I. ROOMS IDENTIFIED TO RECEIVE TILE ON WALLS MUST

INCLUDE METAL TRANSITIONS ON ALL OUTSIDE AND INSIDE

CORNERS AS WELL AS THE INTERSECTION BETWEEN

FLOOR AND WALL TILE WHERE APPLICABLE FOR A

COMPLETE INSTALLATION.

J. ALL WALLS TO BE PAINTED (PNT-1) UNLESS OTHERWISE

INDICATED. ALL HOLLOW METAL DOORS AND DOOR

FRAMES TO BE PAINTED (PNT-3). ALL GWB & EXPOSED

CEILINGS TO BE PAINTED (PNT-2).

K. ALL WINDOW SILLS TO BE SOLID SURFACE (SS-2).

L. ALL SHOWER FLOORS AND SHOWER WALLS TO BE SOLID

SURFACE (SS-3).

M. ALL TOILET PARTITIONS TO BE HDPE FINISH (HDP-1).

N. ALL INTERIOR WOOD DOORS TO BE (WD-1).

O. ALL FLOOR TILE TO RECEIVE GROUT FINISH (GR-1). ALL

WALL TILE TO RECEIVE GROUT FINISH (GR-2).

P. EXTERIOR WALLS MUST BE CLEANED AND REPAINTED TO

MATCH EXISTING CONDITIONS.

Q. SEE I-601 FOR FINISH LEGEND.

FINISH NOTES

D. ALL INTERIOR FINISHES IN VERTICAL EXIT WAYS, EXIT

LOBBIES, AND EXIT CORRIDORS MUST MEET MINIMUM

CLASS A RATING.

E. ALL MATERIALS/PRODUCTS ARE TO BE INSTALLED PER

MANUFACTURER'S INSTALLATION REQUIREMENTS

F. SPRAY PAINT ELECTRICAL PANELS, ACCESS PANELS, AND

EXPANSION JOINTS TO MATCH THE ADJACENT WALL

COLOR. PANELS PAINTED BY BRUSH ARE NOT

ACCEPTABLE

G. ALL FLOORING TRANSITIONS MUST MEET ABA GUIDELINES.

FLOORING TRANSITIONS OCCURRING UNDER DOORS MUST

BE CENTERED UNDER DOOR.

H. INSTALL CORNER GUARDS (CG-1) ON ALL OUTSIDE

CORNERS. INSTALL END WALL PROTECTORS AT OPEN

ENDED WALLS. CORNER GUARDS AND END CAPS MUST BE

FULL HEIGHT AND SHOULD NOT BE USED ON CMU WALLS,

TILED WALLS, OR MANUFACTURED STONE WALLS.

2' 4' 8'0' 1/4" =1'-0"

GRAPHIC SCALE:

SCALE: 1/4" = 1'-0"B1 MECHANICAL BUILDING FINISH PLAN

SCALE: 1/4" = 1'-0"B4 MECHANICAL BUILDING SIGNAGE PLAN

SIGNAGE SCHEDULE

TYPE DESCRIPTION QTY

S1 ROOM IDENTIFICATION SIGN 16

S2 PERMANENT ROOM IDENTIFICATION SIGN 30

S2E EXTERIOR ROOM IDENTIFICATION SIGN 5

S3 STAIRWAY LEVEL INDICATOR 9

S4M MENS RESTROOM IDENTIFICATION SIGN 7

S4W WOMENS RESTROOM & SHOWER IDENTIFICATION SIGN 1

S6 STAIR IDENTIFICATION SIGN 5

S7 LARGE DIRECTIONAL SIGN 6

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

GN

E No.

SCALE: 1/4" = 1'-0"B6 DRYER CHASE FINISH PLAN

SIGNAGE NOTES

A. ALL SIGNAGE TO COMPLY WITH UFC 3 120 01.

B. ALL SIGN TYPES, TEXT WORDING, AND ROOM NUMBERS TO

BE VERIFIED WITH END USER AND REVIEWED BY NAVFAC

INTERIOR DESIGNER PRIOR TO FABRICATION.

C. ALL GRADE 2 BRAILLE TO BE TACTILE RAISED 0.8 MM FROM

THE SURFACE WITH ROUNDED DOTS.

D. SIGNS MUST USE HIGH CONTRAST, NON-GLARE FINISHES.

CHARACTERS MUST BE UPPER CASE AND USE SANS SERIF

FONTS.

E. SIGNS MUST INCLUDE CLEAR VISUAL ELEMENTS FOR

INDIVIDUALS WITH LOW VISION, BLINDNESS AND COGNITIVE

DISABILITIES.

F. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

G. SEE ELEVATION A3 & B3 ON SHEET I-501 FOR MOUNTING

HEIGHT OF ACRYLIC SIGNAGE.

H. REFER TO SHEET I-602 FINISH LEGEND FOR SIGNAGE

FINISHES.

I. MOUNTING OF SIGNAGE SYSTEM MUST INCLUDE SURFACE

MOUNTING WITH SCREW-ON APPLICATION FOR INTERIOR

WALLS.

J. SIGNS THAT MOUNT TO GLASS MUST INCLUDE AN EQUALLY

SIZED BLANK SIGN PANEL ALIGNED TO OPPOSITE SIDE OF

THE GLASS.

SIGNAGE TO BE LOCATED

ON LATCH SIDE OF SINGLE

DOOR OPENINGS.

INSTANCES WHERE ROOM

IS NOT AVAILABLE ON LATCH

SIDE, LOCATE SIGNAGE ON

HINGE SIDE OF DOOR

9"

" M

IN

" M

AX

MAXIMUM HEIGHT -

60" A.F.F. FROM THE

BASELINE OF THE

HIGHEST TACTILE

CHARACTER

MINIMUM HEIGHT -

60" A.F.F. FROM THE

BASELINE OF THE

HIGHEST TACTILE

CHARACTER

AT INSTANCES WHERE

ROOM IS NOT AVAILABLE

ON EITHER SIDE OF DOOR

FRAME, MOUNT SIGNAGE

ON SURFACE OF DOOR

" M

IN

" M

AX

MAXIMUM HEIGHT -

60" A.F.F. FROM THE

BASELINE OF THE

HIGHEST TACTILE

CHARACTER

MINIMUM HEIGHT -

60" A.F.F. FROM THE

BASELINE OF THE

HIGHEST TACTILE

CHARACTER

EQ EQ

9"

3" 9"

3"

S4W

WOMEN

S2

ROOM

1 1/2" HELVETICA

MEDIUM TACTILE

ROOM NUMBER

WITH GRADE 2

BRAILLE

9"

ROOM

ROOM 6"

3"

9"

1/4" 8 1/2" 1/4"

3/4" HELVETICA

MEDIUM

TACTILE ROOM

NUMBER WITH

GRADE 2

BRAILLE

REMOVABLE

END CAPS

1/4" 8 1/2" 1/4"

1 1/2" HELVETICA

MEDIUM TACTILE

ROOM NUMBER

WITH GRADE 2

BRAILLE

6" SYMBOL

1" HELVETICA

MEDIUM

TACTILE ROOM

DESCRIPTION

WITH GRADE 2

BRAILLE

S1

ROOM

1 1/2" HELVETICA

MEDIUM TACTILE

ROOM NUMBER

WITH GRADE 2

BRAILLE

9"

6" 3"

9"

1/4" 8 1/2" 1/4"

REMOVABLE

END CAPS

ROOM

ROOM

ROOM

PRINTED PAPER

INSERT WITH

ROOM

DESCRIPTION

PERMANENT ROOM IDENTIFICATION SIGNROOM IDENTIFICATION SIGN

S6

9"

3" 8"

2" EXIT

1/4" 8 1/2" 1/4"

STAIR A

1 1/2" HELVETICA

MEDIUM TACTILE

ROOM NUMBER

WITH GRADE 2

BRAILLE

6" SYMBOL

1" HELVETICA

MEDIUM

TACTILE ROOM

DESCRIPTION

WITH GRADE 2

BRAILLE

STAIR IDENTIFICATION SIGN

20"

1/4" 19 1/2" 1/4"

3" MESSAGE

INSERT PANELS

WITH 1 1/2"

ARROWS AND

1" MESSAGE

TEXT IN

HELVETICA

MEDIUM1000 - 1299

COMMAND FINANCE

PAY INQUIRIES

1800 - 1999

COMMERCIAL ACCOUNTS

TRAVEL ACCOUNTS

S7

LARGE DIRECTIONAL SIGNWOMENS RESTROOM & SHOWER IDENTIFICATION SIGN

12"

1/4" 11 1/2" 1/4"

STAIR B

S3

MEDIUM DIRECTIONAL SIGN

ROOMS 201-256

FLOOR

2 5" CHARACTER

1 1/2" HELVETICA

MEDIUM TACTILE

ROOM NUMBER

WITH GRADE 2

BRAILLE

1" HELVETICA

MEDIUM

TACTILE ROOM

DESCRIPTION

1" HELVETICA

MEDIUM

TACTILE ROOM

DESCRIPTION

9"

3" 8"

3" MEN

1/4" 8 1/2" 1/4"

1 1/2" TACTILE

ROOM NUMBER W/

GRADE 2 BRAILLE -

HELVETICA NEUE

55 ROMAN

6" SYMBOL

1" TACTILE ROOM

DESCRIPTION W/

GRADE 2 BRAILLE -

HELVETICA NEUE

55 ROMAN

S4M

MENS RESTROOM IDENTIFICATION SIGN

ROOM

9"

6"

3/4" TACTILE LETTERING

W/ GRADE 2 BRAILLE

HALVETICA NEUE 55 ROMAN

UV ACRYLIC BACK

1 1/2" TACTILE ROOM NUMBERS

WITH GRADE 2 BRAILLE

HALVETICA NEUE 55 ROMAN

S2E

EXTERIOR ROOM SIGN

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:3

AM

I-501

APG

JDK

JDK REPAIR BEQ G703

SIGNAGE DETAILS

60043519 N40085-25-B-0051

SCALE: 1/2" = 1'-0"A3 TYP. WALL MOUNTED SIGNAGE LOCATION

SCALE: 1/2" = 1'-0"B3 TYP. DOOR MOUNTED SIGNAGE LOCATION

SCALE: 3" = 1'-0"A1 TYPICAL SIGNAGE DETAILS

SIGNAGE NOTES

A. ALL SIGNAGE TO COMPLY WITH UFC 3 120 01.

B. ALL SIGN TYPES, TEXT WORDING, AND ROOM NUMBERS TO

BE VERIFIED WITH END USER AND REVIEWED BY NAVFAC

INTERIOR DESIGNER PRIOR TO FABRICATION.

C. ALL GRADE 2 BRAILLE TO BE TACTILE RAISED 0.8 MM FROM

THE SURFACE WITH ROUNDED DOTS.

D. SIGNS MUST USE HIGH CONTRAST, NON-GLARE FINISHES.

CHARACTERS MUST BE UPPER CASE AND USE SANS SERIF

FONTS.

E. SIGNS MUST INCLUDE CLEAR VISUAL ELEMENTS FOR

INDIVIDUALS WITH LOW VISION, BLINDNESS AND COGNITIVE

DISABILITIES.

F. REFER TO SHEET I-501 FOR SIGNAGE DETAILS.

G. SEE ELEVATION A3 & B3 ON SHEET I-501 FOR MOUNTING

HEIGHT OF ACRYLIC SIGNAGE.

H. REFER TO SHEET I-602 FINISH LEGEND FOR SIGNAGE

FINISHES.

I. MOUNTING OF SIGNAGE SYSTEM MUST INCLUDE SURFACE

MOUNTING WITH SCREW-ON APPLICATION FOR INTERIOR

WALLS.

J. SIGNS THAT MOUNT TO GLASS MUST INCLUDE AN EQUALLY

SIZED BLANK SIGN PANEL ALIGNED TO OPPOSITE SIDE OF

THE GLASS.

SIGNAGE SCHEDULE

TYPE DESCRIPTION QTY

S1 ROOM IDENTIFICATION SIGN 16

S2 PERMANENT ROOM IDENTIFICATION SIGN 30

S2E EXTERIOR ROOM IDENTIFICATION SIGN 5

S3 STAIRWAY LEVEL INDICATOR 9

S4M MENS RESTROOM IDENTIFICATION SIGN 7

S4W WOMENS RESTROOM & SHOWER IDENTIFICATION SIGN 1

S6 STAIR IDENTIFICATION SIGN 5

S7 LARGE DIRECTIONAL SIGN 6

I G

IV R

FOHT

I

NO

M N

EW

A

OM

L

C

C

A

Cert. 001152

JAMIE D. KISSEL RER

T

IFIED

INTERIOR

DE

SI

RESINOUS FLOORING

(NOT TO EXCEED 1:12 SLOPE)

CONCRETE SUBSTRATE

GRIND DOWN CONCRETE

SUBSTRATE

(DEPTH SUFFICIENT TO

ALLOW RESINOUS

FLOORING TO TAPER AT

SPECIFIED THICKNESS)

TILE

SUBSTRATE

TS-2

EPOXY

FILL WITH GROUT

WALL TILE

TS-3

FLOOR TILE

SUBSTRATE

FILL WITH GROUT

SUBSTRATE

TS-4

TILE

FILL W/ GROUT

TILE

FILL W/ GROUT

PAINTED GYPSUM

TS-5

TILE

FILL WITH GROUT

FLOOR DRAIN

LOCATION

CUT SLAB OR TILE

ON DIAGONAL AND

INSTALL ON SLOPE

FOR DRAINAGE

FLOORING SURFACE

INSTALL BLOCKING,

LEVEL AND PLUMB

FASTENERS

BRACKET, 2 1/4" UNI MOUNT

10# CLUTCH

TUBE ROLLER

SHADE FABRIC, WS-1

HEM POCKET

SH

AD

E H

EI

G

H T

FASCIA FINISHED IN SATIN

CONVENTIONAL

STEEL STUD

FLUSH STAINLESS STEEL

CORNER GUARD

GYPSUM WALLBOARD

DRYWALL "J" TRIM

AL

IG

N

ALIGN

3/ 8"

1/

2"

SOLID SURFACE

EASED EDGE

INSTALL BLOCKING,

LEVEL AND PLUMB

FASTENERS

BRACKET, 2 1/4" UNI MOUNT

10# CLUTCH

TUBE ROLLER

SHADE FABRIC, WS-1

HEM POCKET

SH

AD

E H

EI

G

H T

FASCIA FINISHED IN SATIN

SHADE FABRIC, WS-2

FRP-1

RB-2

SEALANT

2"

A B

C D

Fil e P ath

P rin t D ate

E

SYM. DESCRIPTION DATE APP.

REVISIONS

M

A.

P.

STCETIHCRA

FB

BERN N.C.NEW

CERT. NO.

UTCETIHCRA

DERETSIG E R NOI

TA

RO

PR

OC

LAR

CAROLINANORTH

50679

DR.

DES.

CHK.

SUBMITTED BY:

DESIGN DIR.

APPROVED: PWO OR OICC

SATISFACTORY TO:

DATE

DATE

DEPARTMENT OF THE NAVY NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

CAMP LEJEUNE, NORTH CAROLINA

MARINE CORPS BASE

SIZE CODE IDENT. NO. NAVFAC DRAWING NO.

E1 80091 CONSTR. CONTR. NO.

AS NOTEDSCALE SHEET

M

BF

A N

O

SPEC.

2 3 4 5 6

A B

C D

E

1 2 3 4 5 6

1008 GRANBY STREET

NORFOLK, VA 23510

757.224.0489

05-25-0051

CHRIS MAAS

W :\2

G

BE

Q R en ov at io n C

L\ R ev it\

G

G

W

ID

R

.rv t 5/

/2

7:

:3

AM

I-502

APG

JDK

JDK REPAIR BEQ G703

INTERIOR DETAILS

60043520 N40085-25-B-0051

SCALE: 12" = 1'-0"A1 EPOXY FLOOR TO CONCRETE DETAIL

SCALE: 12" = 1'-0"A2 EPOXY FLOORING TO TILE DETAIL

SCALE: 12" = 1'-0"B1 INSIDE CORNER TILE DETAIL

SCALE: 12" = 1'-0"B2 OUTSIDE CORNER TILE DETAIL

SCALE: 12" = 1'-0"B3 WALL TILE TO GWB DETAIL

SCALE: 3" = 1'-0"C1 FLOOR DRAIN DETAIL

SCALE: 3" = 1'-0"C3 SINGLE ROLLER SHADE DETAIL

0' 6" 3" =1'-0"

GRAPHIC SCALE:

3" 9"

12" = 1'-0" 0" 1/2" 1" 3"

FINISH NOTES

A. FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY COLOR, PATTERN, TEXTURE AND

SALIENT CHARACTERISTICS ONLY. THE LISTING OF

MANUFACTURER INFORMATION IS NOT INTENDED TO LIMIT

THE SELECTION OF PRODUCTS PROVIDED BY OTHER

MANUFACTURERS. PRODUCTS MEETING THESE CRITERIA

WILL BE CONSIDERED AND MUST BE REVIEWED BY THE

INTERIOR DESIGNER OF RECORD (IDOR) AND THE NAVFAC

INTERIOR DESIGNER AND APPROVED BY THE

CONTRACTING OFFICER.

B. FINISH ITEMS ARE NOT TO BE SUBSTITUTED DUE TO

ORDERING LEAD TIMES. IT IS THE CONTRACTOR ’S

RESPONSIBILITY TO ORDER ALL MATERIALS IN TIME TO

AVOID DELAYS.

C. COORDINATE THERMOSTAT LOCATIONS WITH MECHANICAL

DRAWINGS AND CONSTRUCTION MANAGER. INSTALL

THERMOSTATS NEAR A CORNER OF THE ROOM OR BY

LIGHT SWITCHES. DO NOT INSTALL THERMOSTATS IN THE

CENTER OF A WALL.

FINISH NOTES

I. ROOMS IDENTIFIED TO RECEIVE TILE ON WALLS MUST

INCLUDE METAL TRANSITIONS ON ALL OUTSIDE AND INSIDE

CORNERS AS WELL AS THE INTERSECTION BETWEEN

FLOOR AND WALL TILE WHERE APPLICABLE FOR A

COMPLETE INSTALLATION.

J. ALL WALLS TO BE PAINTED (PNT-1) UNLESS OTHERWISE

INDICATED. ALL HOLLOW METAL DOORS AND DOOR

FRAMES TO BE PAINTED (PNT-3). ALL GWB & EXPOSED

CEILINGS TO BE PAINTED (PNT-2).

K. ALL WINDOW SILLS TO BE SOLID SURFACE (SS-2).

L. ALL SHOWER FLOORS AND SHOWER WALLS TO BE SOLID

SURFACE (SS-3).

M. ALL TOILET PARTITIONS TO BE HDPE FINISH (HDP-1).

N. ALL INTERIOR WOOD DOORS TO BE (WD-1).

O. ALL FLOOR TILE TO RECEIVE GROUT FINISH (GR-1). ALL

WALL TILE TO RECEIVE GROUT FINISH (GR-2).

P. EXTERIOR WALLS MUST BE CLEANED AND REPAINTED TO

MATCH EXISTING CONDITIONS.

Q. SEE I-601 FOR FINISH LEGEND.

FINISH NOTES

D. ALL INTERIOR FINISHES IN VERTICAL EXIT WAYS, EXIT

LOBBIES, AND EXIT CORRIDORS MUST MEET MINIMUM

CLASS A RATING.

E. ALL MATERIALS/PRODUCTS ARE TO BE INSTALLED PER

MANUFACTURER'S INSTALLATION REQUIREMENTS

F. SPRAY PAINT ELECTRICAL PANELS, ACCESS PANELS, AND

EXPANSION JOINTS TO MATCH THE ADJACENT WALL

COLOR. PANELS PAINTED BY BRUSH ARE NOT

ACCEPTABLE

G. ALL FLOORING TRANSITIONS MUST MEET ABA GUIDELINES.

FLOORING TRANSITIONS OCCURRING UNDER DOORS MUST

BE CENTERED UNDER DOOR.

H. INSTALL CORNER GUARDS (CG-1) ON ALL OUTSIDE

CORNERS. INSTALL END WALL PROTECTORS AT OPEN

ENDED WALLS. CORNER GUARDS AND END CAPS MUST BE

FULL HEIGHT AND SHOULD NOT BE USED ON CMU WALLS,

TILED WALLS, OR MANUFACTURED STONE WALLS.

SCALE: 6" = 1'-0"A3 CORNER GUARD DETAIL

SCALE: 3" =…