Drawings_Part_11_2018_06-01.pdf

PROJECT SPECIFICATIONS

A. ALL WORK ON THE PROJECT SHALL CONFORM TO ALL LOCAL CITY, STATE AND

NATIONAL CODES AND REGULATIONS, INCLUDING BUT NOT LIMITED TO THE

N.F.P.A., N.E.C., U.B.C., I.E.C.C., I.M.C., U.P.C., THE LOCAL UTILITY SERVING

COMPANIES AND THE AUTHORITY HAVING JURISDICTION.

B. THE WORK ON THIS PROJECT SHALL CONSIST OF ALL ITEMS, ARTICLES,

MATERIALS, EQUIPMENT, AND LABOR FURNISHED TOGETHER ALONG WITH ALL

INCIDENTAL ITEMS REQUIRED BY GOOD PRACTICE AND WORKMANSHIP TO

PROVIDE A SATISFACTORY, COMPLETE AND FUNCTIONAL SYSTEM IN

ACCORDANCE WITH THE DRAWINGS AT NO ADDITIONAL COST TO THE OWNER.

C. THE CONTRACTOR SHALL BE RESPONSIBLE FOR AND PAY FOR ALL FEES AND

PERMITS REQUIRED FOR WORK UNDER THEIR CONTRACT AND UNDER THEIR

SUPERVISION BY SUBCONTRACT.

D. MANUFACTURER'S TRADE NAMES AND CATALOG NUMBERS ARE LISTED TO

INDICATE SPECIAL CONDITIONS AND QUALITY OF MATERIALS OR EQUIPMENT

SUPPLIED. ALTERNATIVE EQUIPMENT OR MATERIALS MAY BE SUBMITTED FOR

REVIEW FOR APPROVAL NOT LESS THAN 7 DAYS PRIOR TO ANY BIDDING.

E. ALL WORK BY THE CONTRACTOR IS SUBJECT TO REVIEW AT ANY TIME BY THE

ARCHITECT/ENGINEER.

F. ALL WORK TO BE PERFORMED SHALL FIRST BE SCHEDULED AND SUBMITTED TO

THE OWNER'S REPRESENTATIVE FOR ACCEPTANCE.

G. SMOKING SHALL NOT BE PERMITTED ANYWHERE IN THIS FACILITY.

H. THE CONTRACTOR SHALL BE CAREFUL NOT TO BLOCK ANY PATHS OF EGRESS

WHILE PERFORMING THE WORK SPECIFIED.

I. THE CONTRACTOR SHALL BE RESPONSIBLE FOR CLEANUP OF ALL MATERIALS

RESULTING FROM HIS/HER WORK. CLEANUP SHALL BE PERFORMED TO THE

LEVEL OF ACCEPTANCE OF THE OWNER'S REPRESENTATIVE & THE ENGINEER.

J. THE CONTRACTOR SHALL AND HEREBY DOES WARRANT AND GUARANTEE THAT

ALL WORK EXECUTED UNDER HIS/HER CONTRACT SHALL BE FREE OF DEFECTS

OF MATERIALS AND WORKMANSHIP FOR A PERIOD OF ONE(1) YEAR FROM THE

DATE OF SUBSTANTIAL COMPLETION.

K. SUBMIT ALL SHOP DRAWINGS FOR ALL EQUIPMENT ASSOCIATED WITH THIS

PROJECT TO THE ARCHITECT/ENGINEER FOR REVIEW/APPROVAL PRIOR TO

ORDERING ANY EQUIPMENT. ALL MATERIALS AND OR EQUIPMENT SHALL BE NEW.

L. UPON SUBSTANTIAL COMPLETION THE CONTRACTOR SHALL SUBMIT AN

OPERATIONS AND MAINTENANCE (O&M) MANUAL/BROCHURE OF ALL EQUIPMENT

TO THE ENGINEER FOR REVIEW/APPROVAL. AFTER RECEIVING APPROVAL FROM

ENGINEER, PROVIDE (2 COPIES) TO OWNER AND PROVIDE THE NECESSARY

TRAINING TO THE FACILITIES PERSONNEL REGARDING ALL EQUIPMENT

ASSOCIATED WITH THIS PROJECT.

SEISMIC GENERAL NOTES

A. ALL MECHANICAL AND PLUMBING EQUIPMENT SHALL BE SEISMICALLY BRACED

PER THE 2012 INTERNATIONAL BUILDING CODE. SEISMIC DESIGN

REQUIREMENTS FOR THE PROJECT ARE AS FOLLOWS:

• SEISMIC DESIGN CATEGORY: D

• IMPORTANCE FACTOR (Ip): 1.0

• IMPORTANCE FACTOR FOR GAS PIPING: 1.5

B. THE MECHANICAL CONTRACTOR SHALL BE RESPONSIBLE TO INCLUDE BRACING

AND RESTRAINTS. BRACING & RESTRAINT DETAILS SHALL BE INCLUDED IN SHOP

DRAWING SUBMITTAL FOR REVIEW AND BY THE ENGINEER.

HVAC GENERAL NOTES

A. ALL NEW PIPING, DUCTWORK AND EQUIPMENT TO BE INSTALLED IN

ACCORDANCE WITH THE 2012 INTERNATIONAL MECHANICAL CODE AND THE 2012

INTERNATIONAL BUILDING CODE REQUIREMENTS.

B. DRAWINGS ARE DIAGRAMMATIC IN NATURE AND DO NOT NECESSARILY SHOW

EXACT LOCATIONS AND SIZES OF ALL EXISTING DUCTWORK, PIPING, SYSTEM

AND EQUIPMENT UNLESS SPECIFICALLY DIMENSIONED. IT IS NOT THE INTENT OF

THESE DRAWINGS TO GRAPHICALLY REPRESENT ALL OF THE WORK REQUIRED

FOR A COMPLETE INSTALLATION IN EVERY RESPECT. THE PURPOSE OF THESE

PLANS IS TO INDICATE THE INTENDED SIZES, APPROXIMATE LOCATION AND

ROUTING OF MAJOR COMPONENTS. ADJUST TO FIELD CONDITIONS. ACTUAL

CONDITIONS AND LOCATIONS SHALL BE FIELD VERIFIED.

C. EXAMINE AND REFER TO ALL ARCHITECTURAL, STRUCTURAL, ELECTRICAL,

MECHANICAL, FIRE PROTECTION AND SITE CIVIL DRAWINGS FOR

CONSTRUCTION CONDITIONS WHICH MAY AFFECT THE CONTRACTORS WORK.

INSPECT THE EXISTING FACILITIES (IF EXIST) FOR VERIFICATION OF EXISTING

CONDITIONS AND SYSTEMS WHICH MAY HAVE AN EFFECT ON HIS/HER WORK

PROR TO SUBMISSION OF BID.

D. IT IS NECESSARY FOR ALL TRADES INVOLVED TO COORDINATE WITH EACH

OTHER AND VERIFY THAT THERE ARE NO CONFLICTS IN LOCATION OF DUCTS,

CONDUITS, DIFFUSERS, BOXES AND OTHER ITEMS THROUGHOUT THIS PROJECT

BEFORE FINAL PLACEMENT OF MATERIALS. REFER TO ARCHITECTURAL,

STRUCTURAL, MECHANICAL, AND ELECTRICAL DRAWINGS AND FIRE

PROTECTION SHOP DRAWINGS FOR ADDITIONAL DETAILS NECESSARY FOR

COORDINATION.

E. THE CONTRACTOR IS TO PROVIDE MATERIALS, LABOR, TRANSPORTATION,

TOOLS, PERMITS, FEES, INSPECTIONS, UTILITIES AND INCIDENTALS NECESSARY

FOR THE COMPLETE INSTALLATION OF THE WORK INDICATED AND DESCRIBED

IN THESE CONTRACT DOCUMENTS.

F. LOCATIONS AND DIMENSIONS OF EXISTING FACILITIES IDENTIFIED ON THIS

DRAWING ARE APPROXIMATE AND REPRESENT THE BEST AVAILABLE

INFORMATION BASED ON A COMBINATION OF FIELD INVESTIGATIONS AND

VARIOUS DESIGN AND RECORD DRAWINGS AVAILABLE AT THE TIME OF DESIGN.

FIELD VERIFY LOCATIONS AND DIMENSIONS PRIOR TO ORDERING EQUIPMENT

AND DURING PERFORMANCE OF THE WORK. PROVIDE ALL DEMOLITION WORK,

NECESSARY FITTINGS, TRANSITIONS, AND OTHER COMPONENTS AS REQUIRED

FOR A COMPLETE AND FUNCTIONAL INSTALLATION OF NEW SYSTEMS AT NO

ADDITIONAL COST TO THE OWNER.

G. THE CONTRACTOR IS TO BE RESPONSIBLE FOR ANY ADDITIONAL DETAILS OR

SPECIAL CONSTRUCTION REQUIRED IN ORDER TO COMPLETE THE

INSTALLATION, WHETHER MENTIONED OR NOT. THE CONTRACTOR IS TO

PROVIDE ALL MATERIALS AND EQUIPMENT THAT ARE TO BE FURNISHED FOR

THE PROPER INSTALLATION OF THE TYPE OF EQUIPMENT AND SYSTEMS

INDICATED.

H. ALL EQUIPMENT SHALL BE INSTALLED LEVEL, PLUMB, AND FIRMLY ANCHORED IN

LOCATIONS INDICATED. OBSERVE MANUFACTURER'S INSTALLATION

INSTRUCTIONS AND RECOGNIZED INDUSTRY PRACTICES TO INSURE THAT

PRODUCTS SERVE THEIR INTENDED FUNCTION.

I. FOLLOW MANUFACTURES WRITTEN INSTALLATION INSTRUCTION FOR RUNNING

THE COMBUSTION AIR AND VENT PIPING AS WELL AS THE TERMINATION

THROUGH THE ROOF. FOLLOW ALL SAFETY INSTRUCTIONS.

J. PROVIDE SEISMIC BRACING OF ALL EQUIPMENT, PIPING, AND DUCTWORK AS

REQUIRED BY LOCAL CODES.

K. CONTRACTOR SHALL BE RESPONSIBLE FOR PROTECTING ALL FIRE BARRIERS,

FIRE PARTITIONS, FIRE WALLS OR ANY OTHER FIRE AND/OR SMOKE SEPARATION

WITHIN THE BUILDING AS DEFINED BY THE ARCHITECTURAL CODE PLAN WITH A

UL LISTED FIRE AND/OR SMOKE STOP SYSTEM.

L. ALL MATERIAL IN A PLENUM RATED SPACE SHALL HAVE A SPREAD NOT

EXCEEDING 25 AND A SMOKE DEVELOPMENT RATING NOT EXCEEDING 50.

M. PROVIDE ACCESS DOORS TO ALLOW SERVICE AND INSPECTION OF EQUIPMENT,

VALVES, DAMPERS, DEVICES INSTALLED ABOVE NON-REMOVABLE CEILINGS.

N. ALL ELEMENTS PENETRATING BUILDING COMPONENTS (ROOF ASSEMBLIES,

WALL ASSEMBLIES, ETC.) SHALL BE SEALED WEATHER AND WATER TIGHT.

O. ALL NEW PIPING SHALL BE IDENTIFIED WITH SETON SETMARK PIPE MARKERS,

LETTERED TO MATCH EXISTING AND MARKED AT A MAXIMUM OF EVERY 25 FT.

ALSO, ALL NEW VALVES SHALL BE IDENTIFIED WITH BRASS OR ALUMINUM VALVE

TAGS.

P. PROVIDE PIPE GUIDES, EXPANSION JOINTS, AND HANGERS PER

MANUFACTURER'S RECOMMENDATIONS.

Q. ALL PIPING WALL PENETRATIONS SHALL HAVE A CHROME ESCUTCHEON PLATE.

ALL SOLDER TO BE LEAD-FREE TYPE. AT THE CONTRACTORS OPTION

MECHANICAL COMPRESSION TYPE FITTING (I.E. PRO-PRESS) MAY BE USED.

R. VERIFY THE LOCATION OF ALL THERMOSTATS AND SENSORS WITH THE

ENGINEER AND ARCHITECT PRIOR TO INSTALLATION. INSTALL THERMOSTATS 60"

ABOVE FINISHED FLOOR PER ADA REQUIREMENTS.

S. ALL DUCT WORK SHALL BE CONSTRUCTED IN ACCORDANCE WITH THE LATEST

REQUIREMENTS OF SMACNA DUCT WORK CONSTRUCTION MANUALS, MINIMUM

GAUGE OF 24, GALVANIZED STEEL. DUCTWORK SHALL BE AIRTIGHT (5%

LEAKAGE). ALL TRANSVERSE JOINTS AND LONGITUDINAL SEAMS SHALL BE

SEALED. FABRICATE ELBOWS WITH CENTERLINE RADIUS EQUAL TO 1.5 TIMES

THE DUCT WIDTH IN THE PLANE OF THE TURN; AND FABRICATE TO INCLUDE

FACTORY MANUFACTURED TURNING VANES IN ELBOWS WHERE SHORTER

RADIUS IS NECESSARY.

T. PROVIDE FLEX CONNECTIONS FROM ALL DUCT WORK TO EQUIPMENT

CONNECTIONS ON THIS PROJECT.

U. FLEXIBLE DUCT SHALL NOT BE USED IN PLACE OF ELBOWS.

V. A COMPLETE AIR AND WATER SYSTEM TEST AND BALANCE (T&B) SHALL BE

PERFORMED BY A NEBB OR AABC CERTIFIED T&B CONTRACTOR FOR ALL NEW

AND MODIFIED DEVICES. MECHANICAL CONTRACTOR SHALL MODIFY EQUIPMENT

AS DIRECTED BY BALANCING CONTRACTOR, IF REQUIRED, TO ACHIEVE DESIGN

PARAMETERS WITH NO EXTRA COST TO THE OWNER. T&B REPORT SHALL BE

PREPARED AND SUBMITTED TO ENGINEER. REPORT SHALL INCLUDE ALL AIR

AND WATER FLOW READINGS, ALL TEMPERATURE AND PRESSURE SETPOINTS

AND ALL ELECTRICAL CONDITIONS FOR ALL DEVICES. REPORT SHALL ALSO

VERIFY PROPER OPERATION OF ENTIRE CONTROL SYSTEM. WHERE REQUIRED

FOR AIR BALANCING, INSTALL ADDITIONAL MANUAL VOLUME DAMPERS.

W. THE MECHANICAL CONTRACTOR SHALL PROVIDE THE OWNER REPRESENTATIVE

WITH 2 HOURS OF TRAINING TO ENSURE PROPER OPERATION AND

MAINTENANCE OF THE SYSTEMS.

18x12

16 �

RECTANGULAR DUCTWORK

ROUND DUCTWORK

AIR DEVICE NUMBER AND CFM

CEILING SUPPLY DIFFUSER

CEILING RETURN GRILLE

CEILING EXHAUST GRILLE

CEILING SLOT DIFFUSER

FLOOR REGISTER

SIDEWALL DIFFUSER OR GRILLE

VERTICAL TRANSITION-

RECTANGULAR SUPPLY DUCT

VERTICAL TRANSITION-

ROUND SUPPLY DUCT

VERTICAL TRANSITION-

RECTANGULAR RETURN DUCT

VERTICAL TRANSITION-

ROUND RETURN DUCT

VERTICAL TRANSITION-

RECTANGULAR EXHAUST DUCT

VERTICAL TRANSITION-

ROUND EXHAUST DUCT

TURNING VANE

MANUAL VOLUME DAMPER

REMOTE VOLUME DAMPER

MOTORIZED DAMPER

ZONE DAMPER

FIRE DAMPER

SMOKE DAMPER

FIRE/SMOKE DAMPER

CFM

HVAC LEGEND

T

C

H

SP

D S

VRF SYSTEM GENERAL NOTES

A. THIS PROJECT WILL INCLUDE THE INSTALLATION OF A VARIABLE REFRIGERANT FLOW (VRF) SYSTEM. ALL

BIDDING MECHANICAL CONTRACTORS MUST PROVIDE REFERENCES FOR THREE (3) SUCCESSFULLY

COMPLETED VRF SYSTEMS TO CONFORM WITH THE BIDDING REQUIREMENTS.

B. ALL REFRIGERATION COMPONENTS OF THE VRF SYSTEM SHALL BE INSTALLED BY STAFF THAT HAVE COMPLETED THE VRF SYSTEM MFGR INSTALLATION TRAINING. SUBMIT CERTIFICATES OF TRAINING

COMPLETION TO THE OWNER AND ENGINEER PRIOR TO STARTING WORK.

PROJECT INFORMATION

PROJECT LOCATION: COEUR D'ALENE, ID

PROJECT ALTITUDE: 2,188 FEET ABOVE SEA LEVEL

SUMMER DESIGN TEMP: 89°F DRY BULB, 62°F WET BUL B (ASHRAE 99% DESIGN)

WINTER DESIGN TEMP: -15°F DRY BULB

PIPE MATERIAL SCHEDULE

SYSTEM MATERIAL SIZES INSULATION THICKNESS** ADD'L DETAILS

REFRIGERANT PIPING REFER TO SPECIFICATIONS. ALSO REFER TO DAIKIN INSTALLATION INSTRUCTIONS.

NATURAL GAS PIPING THREADED BLACK IRON ALL NONE PAINT ORANGE

CONDENSATE DRAIN PIPING SCHEDULE 40 PVC ALL NONE SEE BELOW

1. PROVIDE SEISMIC BRACING OF PIPING 2 1/2" AND LARGER OR AS REQUIRED BY LOCAL CODES.

2. ANY CONNECTIONS THAT ARE DISSIMILAR METALS SHALL REQUIRE BRASS UNIONS OR FLANGE SEPARATION.

PIPE MATERIAL REMARKS:

DUCT MATERIAL SCHEDULE

SHAPE FUNCTION DESCRIPTION MATERIAL PRESSURE CLASS INSULATION R-VALUE NOTES ADDITIONAL DETAILS

RECTANGULAR SUPPLY SUPPLY AIR - CONDITIONED SPACE SHEET METAL 2" WRAP R-5 1 SEE BELOW

ROUND SUPPLY SUPPLY AIR - CONDITIONED SPACE </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" WRAP R-5 1 SEE BELOW

RECTANGULAR RETURN RETURN AIR - CONDITIONED SPACE SHEET METAL 2" NONE - - 2 SEE BELOW

ROUND RETURN RETURN AIR - CONDITIONED SPACE </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" NONE - - - - SEE BELOW

RECTANGULAR EXHAUST EXHAUST AIR - CONDITIONED SPACE SHEET METAL 2" NONE - - - - SEE BELOW

ROUND EXHAUST EXHAUST AIR - CONDITIONED SPACE </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" NONE - - - - SEE BELOW

RECTANGULAR OUTSIDE AIR OUTSIDE AIR - CONDITIONED SPACE SHEET METAL 2" WRAP R-8 1 SEE BELOW

ROUND OUTSIDE AIR OUTSIDE AIR - CONDITIONED SPACE </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" WRAP R-8 1 SEE BELOW

RECTANGULAR OUTSIDE AIR OUTSIDE AIR TO HRV SHEET METAL 2" WRAP R-8 1 SEE BELOW

ROUND OUTSIDE AIR OUTSIDE AIR TO HRV </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" WRAP R-8 1 SEE BELOW

RECTANGULAR EXHAUST EXHAUST AIR FROM HRV SHEET METAL 2" WRAP R-8 1 SEE BELOW

ROUND EXHAUST EXHAUST AIR FROM HRV </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" WRAP R-8 1 SEE BELOW

RECTANGULAR SUPPLY SUPPLY AIR FROM HRV SHEET METAL 2" WRAP R-5 1 SEE BELOW

ROUND SUPPLY SUPPLY AIR FROM HRV </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" WRAP R-5 1 SEE BELOW

RECTANGULAR RETURN RETURN AIR TO HRV SHEET METAL 2" NONE - - - - SEE BELOW

ROUND RETURN RETURN AIR TO HRV </=12" SNAPPY DUCT, >12" SPIRAL SHEET METAL 2" NONE - - - - SEE BELOW

ROUND SUP / RTN / EX 5' LENGTH MAX - SUPPLY AND RETURN FLEX 2" INTEGRAL -- -- SEE BELOW

RECT./ ROUND SUP / RTN / EX EXPOSED DUCTWORK SHEET METAL / SPIRAL SHEET METAL 2" NONE -- 3 SEE BELOW

NOTES:

1. ALL SERVICE INSULATION JACKET IS TO BE SEALED AT THE EXPOSED

SEAMS/EDGES/CORNERS.

2. SELECT DUCTS TO HAVE 1/2" INTERNAL SOUND LINING, LOCATIONS NOTED ON PLANS.

MAINTAIN DUCT FREE AREA DIMENSIONS AS CALLED OUT ON PLANS.

ADDITIONAL DETAILS:

1. PROVIDE SEISMIC BRACING OF ALL DUCTWORK AS REQUIRED BY LOCAL CODES.

2. ALL DUCTWORK DIMENSIONS SHOWN ON PLAN ARE INSIDE CLEAR FREE AREA DIMENSIONS.

3. ALL SHEET METAL DUCTWORK SHALL BE A MINIMUM OF 24 GAGE SHEET METAL.

4. ALL DUCTWORK SHALL BE CONSTRUCTED AND INSTALLED AS PER SMACNA GUIDELINES.

3. PAINT EXPOSED DUCTWORK, ARCHITECT TO SELECT COLOR.

THERMOSTAT

CARBON DIOXIDE SENSOR

HUMIDISTAT

WALL SWITCH

STATIC PRESSURE SENSOR

DUCT SMOKE DETECTOR

HVAC CONTROLS LEGEND

HVAC PIPING SYSTEMS LEGEND

REFRIGERANT VAPOR

CONDENSATE (CND)

REFRIGERANT SUCTION

REFRIGERANT COMMON (3RD PIPE)

TEMP. CONTROL GEN'L NOTES

A. THIS PROJECT WILL INCLUDE THE INSTALLATION OF A FACILITY

MANAGEMENT AND CONTROL SYSTEM (FMCS). SEE SPECIFICATION

SECTIONS 230900 "INSTRUMENTATION AND CONTROL FOR HVAC" 230993

"SEQUENCE OF OPERATIONS FOR HVAC CONTROLS" AND 260923 "LIGHTING

CONTROL DEVICES" FOR ADDITIONAL INFORMATION.

B. IT SHALL BE THE RESPONSIBILITY OF THE TEMPERATURE CONTROLS

CONTRACTOR TO PROVIDE ALL LABOR, MATERIAL, EQUIPMENT AND

SOFTWARE NOT SPECIFICALLY REFERRED TO ON THE PLANS OR IN THE

SPECIFICATION TO ACHIEVE THE SEQUENCE OF OPERATIONS DESCRIBED

IN SPECIFICATION SECTION 230993 "SEQUENCE OF OPERATIONS FOR HVAC

CONTROLS".

C. PROVIDE EVERYTHING SHOWN ON THE POINTS LIST AS WELL AS

EVERYTHING IN THE SEQUENCES OR ANY OTHER PART OF THE CONTRACT

DOCUMENTS REGARDLESS OF IF THEY ARE LISTED ON THE POINTS LIST.

0 1 2 3 4 5 6 7 8 9 10 inches

DRAWING NO.

PKG

NO.

SHEET

OF

PROJECT NO.:

REVISIONS:

DESIGNED

TECH. REVIEW

CADD

DESIGNED SUB SHEET NO. TITLE OF SHEET

/1

/2

:0 :5

P

M

M0.1

06.01.18C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

HVAC NOTES AND LEGENDS

13083

INRC OFFICE BUILDING

PHASE 3

USDA FOREST SERVICE

BJK/JTW

TJB

JTW

P

R E E

NI

GN

ELANOISS

EF

O R R

EG

ISTERED

S

T A

TE OF ID

A

H O

WAVERE

K

TYD

O J

11076

VARIABLE REFRIGERANT FLOW FAN COIL AND BRANCH SELECTOR BOX SCHEDULE

SYSTEM MARK MASTER THERMOSTAT

LOCATION MANF. MODEL NUMBER TYPE SOUND

(dBA) CFM

OSA

VENT

CFM

EVAPORATOR COIL UNIT PHYSICAL DATA

CONDENSATE

PUMP REMARKS

ASSOCIATED BRANCH SELECTOR

REQUIRED SENS. COOL

(BTU/H)

AVAILABLE TOT. COOL

(BTU/H)

AVAILABLE SENS. COOL

(BTU/H)

REQUIRED HEAT

(BTU/H)

AVAILABLE HEAT

(BTU/H) WIDTH (IN) HEIGHT (IN) DEPTH (IN)

WEIGHT

(LBS) MARK MODEL DIMENSIONS (WxHxD) WEIGHT (LBS)

V R

F S

Y S

TE

M

FC103 103 RECEPTION / LOBBY DAIKIN FXMQ24PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 38-42 688 140 13.7 20.6 16.0 18.1 27.0 39.4 11.8 27.6 79 YES SEE BELOW BS9 BSQ36TVJ 15.3x8.1x12.8 27

FC104 104 MEDIUM CONF. RM DAIKIN FXMQ12PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 35-39 450 100 7.1 10.3 8.2 9.2 13.5 21.7 11.8 27.6 62 YES SEE BELOW BS10 BSQ36TVJ 15.3x8.1x12.8 27

FC105a 105 LRG. CONF. RM (NORTH) DAIKIN FXMQ72MVJU DUCTED, CEILING-CONCEALED, THIN LINE 45-48 2048 315 34.5 62.0 47.8 44.0 81.0 54.3 18.5 43.3 302 YES SEE BELOW BS8 BSQ96TVJ 15.3x8.1x12.8 33

FC105b 105 LRG. CONF. RM (SOUTH) DAIKIN FXMQ72MVJU DUCTED, CEILING-CONCEALED, THIN LINE 45-48 2048 315 27.6 62.0 47.8 26.2 81.0 54.3 18.5 43.3 302 YES SEE BELOW BS12 BSQ96TVJ 15.3x8.1x12.8 33

FC114 114 MEDIUM CONF. RM. DAIKIN FXZQ15MVJU9 CEILING CASSETTE 30-36 388 75 7.0 12.9 9.3 4.2 17.5 22.6 11.3 22.6 42 YES SEE BELOW BS5 BSQ36TVJ 15.3x8.1x12.8 27

FC117 117 BLM OFFICES DAIKIN FXMQ18PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 38-42 635 75 11.3 15.5 13.2 9.2 20.0 39.4 11.8 27.6 79 YES SEE BELOW BS4 BSQ36TVJ 15.3x8.1x12.8 27

FC127 127 CIO OFF. DAIKIN FXMQ07PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 29-33 317 70 2.8 6.5 5.5 1.9 8.5 21.7 11.8 27.6 55 YES SEE BELOW

FC122a 122 BLM OPEN OFF. DAIKIN FXMQ30PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 39-43 1094 120 17.5 25.8 20.1 30.2 34.0 55.1 11.8 27.6 101 YES SEE BELOW BS3 BSQ60TVJ 13.3x8.1x12.8 27

FC122b 122 BLM OPEN OFF. DAIKIN FXMQ15PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 37-40 560 80 9.5 12.9 10.3 14.6 16.5 39.4 11.8 27.6 79 YES SEE BELOW

FC123 123 FMO OPEN OFF. DAIKIN FXMQ24PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 38-42 688 80 13.6 20.6 16.0 24.0 27.0 39.4 11.8 27.6 79 YES SEE BELOW BS2 BSQ36TVJ 15.3x8.1x12.8 27

FC131 131 LAW ENFORCEMENT OFF. DAIKIN FXMQ48PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 40-44 1377 100 23.8 41.3 30.5 32.1 54.0 55.1 11.8 27.6 101 YES SEE BELOW BS1 BSQ60TVJ 13.3x8.1x12.8 27

FC136 136 BLM OPEN OFF. DAIKIN FXMQ30PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 39-43 1094 100 18.8 25.8 20.1 21.5 34 55.1 11.8 27.6 101 YES SEE BELOW BS11 BSQ36TVJ 15.3x8.1x12.8 27

FC137 137 PRINT ROOM DAIKIN FXZQ18MVJU9 CEILING CASSETTE 34-41 494 50 8.1 15.5 11.1 7.6 20.0 22.6 11.3 22.6 42 YES SEE BELOW BS6 BSQ60TVJ 13.3x8.1x12.8 27

FC139 139 BREAKROOM DAIKIN FXMQ30PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 39-43 1094 50 19.2 25.8 20.1 23.5 34 55.1 11.8 27.6 101 YES SEE BELOW

FC143 143 FHP OPEN OFF. DAIKIN FXMQ54PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 43-46 1624 140 30.6 46.4 34.3 38.7 60.0 55.1 11.8 27.6 104 YES SEE BELOW BS7 BSQ60TVJ 13.3x8.1x12.8 27

V R

F S

Y S

TE

M

FC201 201 LRG CONF. RM DAIKIN FXFQ24TVJU CEILING CASSETTE 28-36 777 120 15.7 20.6 16.9 24.9 27.0 33.1 9.7 33.1 51 YES SEE BELOW BS13 BSQ36TVJ 15.3x8.1x12.8 27

FC202 202 NEPA PLANNER OFF. DAIKIN FXMQ24PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 38-42 688 50 14.2 20.6 16.0 17.3 27.0 39.4 11.8 27.6 79 YES SEE BELOW BS14 BSQ36TVJ 15.3x8.1x12.8 27

FC204 204 FWS OFFICES DAIKIN FXMQ15PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 37-40 560 50 9.6 12.9 10.3 7.2 16.5 39.4 11.8 27.6 79 YES SEE BELOW BS15 BSQ36TVJ 15.3x8.1x12.8 27

FC205 205 FWS OPEN OFF. DAIKIN FXMQ30PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 39-43 1094 140 18.6 25.8 20.1 27.4 34.0 55.1 11.8 27.6 101 YES SEE BELOW BS16 BSQ36TVJ 15.3x8.1x12.8 27

FC214 214 SUPERVISORS OFF. DAIKIN FXMQ30PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 39-43 1094 120 19.5 25.8 20.1 28.1 34.0 55.1 11.8 27.6 101 YES SEE BELOW BS17 BSQ36TVJ 15.3x8.1x12.8 27

FC216 216 FWS OFF. DAIKIN FXMQ15PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 37-40 560 100 8.4 12.9 10.3 6.1 16.5 39.4 11.8 27.6 79 YES SEE BELOW BS18 BSQ36TVJ 15.3x8.1x12.8 27

FC224 224 MED. CONF. RM DAIKIN FXZQ12MVJU9 CEILING CASSETTE 29-33 335 100 6.6 10.3 6.9 3.9 13.5 22.6 11.3 22.6 42 YES SEE BELOW BS19 BSQ36TVJ 15.3x8.1x12.8 27

FC225 225 MED. CONF. RM DAIKIN FXFQ18TVJU CEILING CASSETTE 28-36 742 100 10.3 15.5 13.7 11.2 20.0 33.1 9.7 33.1 51 YES SEE BELOW BS20 BSQ36TVJ 15.3x8.1x12.8 27

FC226 226 HRM OPEN OFF. DAIKIN FXMQ18PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 38-42 635 140 13.1 15.5 13.2 16.6 20.0 39.4 11.8 27.6 79 YES SEE BELOW BS21 BSQ36TVJ 15.3x8.1x12.8 27

FC228 228 TEC OPEN OFF. DAIKIN FXMQ48PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 40-44 1377 140 26.6 41.2 30.5 39.6 54.0 55.1 11.8 27.6 101 YES SEE BELOW BS22 BSQ60TVJ 13.3x8.1x12.8 27

FC230 230 AQM OPEN OFF. DAIKIN FXMQ54PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 43-46 1624 140 31.1 46.4 34.3 38.2 60.0 55.1 11.8 27.6 104 YES SEE BELOW BS23 BSQ60TVJ 13.3x8.1x12.8 27

FC231 231 VEG OPEN OFF. DAIKIN FXMQ30PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 39-43 1094 140 20.0 25.8 20.1 20.6 34.0 55.1 11.8 27.6 101 YES SEE BELOW BS24 BSQ60TVJ 15.3x8.1x12.8 27

FC232 232 PRINT RM DAIKIN FXMQ15PBVJU CEILING CASSETTE 30-36 388 50 7.8 12.9 9.3 7.3 17.5 22.6 11.3 22.6 42 YES SEE BELOW

FC234 234 BREAKROOM DAIKIN FXMQ36PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 39-43 1130 60 22.0 30.9 24.2 23.1 40.0 55.1 11.8 27.6 101 YES SEE BELOW BS25 BSQ36TVJ 15.3x8.1x12.8 27

FC237 237 ECO OPEN OFF. DAIKIN FXMQ48PBVJU DUCTED, CEILING-CONCEALED, THIN LINE 40-44 1377 140 26.2 41.3 30.5 31.1 54.0 55.1 11.8 27.6 101 YES SEE BELOW BS26 BSQ60TVJ 13.3x8.1x12.8 27

REMARKS:

1. PROVIDE AN INTEGRAL FACTORY-INSTALLED CONDENSATE PUMP SUPPLIED IN ALL FAN COIL UNITS.

2. PROVIDE MOUNTING AS NECESSARY

3. PROVIDE VIBRATION ISOLATION FOR ALL CEILING CASSETTES

NOTES:

1. REFER TO VRF REFRIGERANT PIPING SCHEMATIC FOR REFRIGERANT LINE SIZES AND ROUTING DETAILS.

2. FOLLOW MANUFACTURER'S INSTALLATION MANUAL PRECISELY TO ENSURE PROPER OPERATION.

3. FINAL UNIT SELECTIONS NEED TO BE VERIFIED BY MANUFACTURER PRIOR TO ORDERING EQUIPMENT.

ELECTRICAL DATA:

SEE MEP COORDINATION SCHEDULE

FOR STARTER/DISCONNECT AND ALL

OTHER ELEC. DATA.

CONTROLS:

1. PROVIDE I-TOUCH CONTROLLER

WITH BACNET INTERFACE.

2. REFER TO M0.4 FOR MORE

CONTROLS INFORMATION.

ACCESSORIES:

1. CONTRACTOR IS RESPONSIBLE FOR PROVIDING ALL NECESSARY ACCESSORIES FOR A FULLY FUNCTIONING SYSTEM.

2. PROVIDE SHUT-OFF AND SCHRADER VALVE BETWEEN SHUT-OFF AND UNIT FOR ALL PIPES CONNECTING TO UNIT.

3. PROVIDE ALL REFNET FITTINGS AS REQUIRED IN PIPING NETWORK.

4. FILTER/DRYER.

5. HIGH/LOW PRESSURE SWITCH.

AIR SOURCE HEAT RECOVERY UNIT - VARIABLE REFRIGERAN T FLOW SCHEDULE

MARK MANUFACTURER MODEL #

NOMINAL

COOLING

CAPACITY

(TONS)

REQUIRED

COOLING

CAPACITY

(MBH)

REQUIRED

HEATING

CAPACITY

(MBH)

CONNECTED

CAPACITY

RATIO

EER

(DUCTED)

COP 47°F

(DUCTED)

COP 17°F

(DUCTED)

OUTDOOR DESIGN CONDITIONS REFRIGERANT UNIT SIZE

ADDITIONAL DETAILSWINTER SUMMER

TYPE HEIGHT (IN.) WIDTH (IN.) DEPTH (IN.) WEIGHT (LBS.)

°F. db °F. db

HP1 DAIKIN RXYQ384TTJU 32 269 305 122% 9.8 3.21 2.06 20.0 95.0 R410A 66 11/16 146 5/8 30 3/16 780+703+703 SEE BELOW

HP2 DAIKIN RXYQ360TTJU 30 298 303 116% 11 3.31 2.17 20.0 95.0 R410A 66 11/16 146 5/8 30 3/16 703+703+703 SEE BELOW

ELECTRICAL DATA:

SEE MEP COORDINATION SCHEDULE

FOR STARTER/DISCONNECT AND ALL

OTHER ELEC. DATA.

6. CRANKCASE HEATER.

7. LOW AMBIENT UNIT (DOWN TO -13°F).

8. LOW AMBIENT CONTROLLER.

9. EVAP. FREEZE T-STAT.

10.WINTER START CONTROL.

0 1 2 3 4 5 6 7 8 9 10 inches

DRAWING NO.

PKG

NO.

SHEET

OF

PROJECT NO.:

REVISIONS:

DESIGNED

TECH. REVIEW

CADD

DESIGNED SUB SHEET NO. TITLE OF SHEET

/1

/2

:0 :5

P

M

M0.2

06.01.18C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

HVAC SCHEDULES

13083

INRC OFFICE BUILDING

PHASE 3

USDA FOREST SERVICE

BJK/JTW

TJB

JTW

P

R E E

NI

GN

ELANOISSEF

O R R

EG

ISTERE

D

S

T A

TE OF ID

AH

O

WAVERE

K

TYD

O J

GAS-FIRED UNIT HEATER SCHEDULE

MARK AREA SERVED MANUF. MODEL

NUMBER

CONTROL

STAGES

HEATING

TYPE GAS CONN. INPUT/OUTPUT

(MBH)

COMB.

AIR VENT CFM FUEL H.P.

DIMENSIONS

WEIGHT ADDITIONAL DETAILS

WIDTH HEIGHT DEPTH

UH-1 HVAC DOGHOUSE REZNOR 400 UDAS 2 GAS 3/4" 400 / 332 6" 6" 5,123 NATURAL GAS 1/2 41" 34" 42" 360 SEE BELOW

ACCESSORIES:

1. UNIT HEATER SHALL BE SEPARATED COMBUSTION.

2. PROVIDE INTEGRAL, NON-FUSED DISCONNECT .

3. PROVIDE WALL-MOUNTED THERMOSTAT & TRANSFORMER AS REQUIRED.

4. FOUR-POINT SUSPENSION/MOUNTING ISOLATION KIT.

5. MANUAL SHUT-OFF AND UNION.

6. PROVIDE TWO-STAGE NATURAL GAS VALVE & FIELD ADJUST FOR SITE ELEVATION.

7. PROVIDE CONCENTRIC VENT KIT THROUGH ROOF.

8. PROVIDE VENT AIRFLOW PROVING SWITCH.

9. PROVIDE HIGH TEMPERATURE LIMIT SWITCH.

10.PROVIDE FLAME ROLLOUT SAFETY SWITCH.

11.PROVIDE ALL STANDARD ACCESSORIES.

CONTROLS:

1. BAS - REFER TO M0.4 FOR DDC CONTROL POINTS AND SEQUENCE

ACCESSORIES:

1. INCLUDE FUSED DISCONNECT, ECM MOTORS, INSULATED CABINET, AND MOTORIZED ISOLATION DAMPERS ON OA & EA AIR STREAMS.

2. PROVIDE MERV-13 FILTER ON OUTDOOR AIR AND MERV-8 FILTER ON EXHAUST AIR, BOTH UPSTREAM OF HEAT EXCHANGER. PROVIDE NEW FILTERS UPON COMPLETION OF WORK.

3. ERV FANS SHALL NOT NEED TO CYCLE FOR DEFROST.

CONTROL:

1. PROVIDE STAND-ALONE CONTROLLER BY MANUFACTURER TO CONTROL BLOWERS, AND OA AND EA DAMPERS, WITH FACTORY-MOUNTED ALARMS.

2. PROVIDE TRANSFORMERS AND RELAYS AS REQUIRED FOR LOW VOLTAGE CONTROL.

3. ERV SHALL CONTINUE TO RUN WITHOUT FREEZING AND WITHOUT CYCLING TO DEFROST.

4. PROVIDE FACTORY-MOUNTED VFD'S ON SUPPLY AND EXHAUST AIR STREAMS FOR BALANCING.

CONTROLS:

1. BAS - REFER TO M0.4 FOR DDC CONTROL POINTS AND SEQUENCE

CONTROLS:

1. BAS - REFER TO M0.4 FOR DDC CONTROL POINTS AND SEQUENCE

* REFER TO SEQUENCE OF OPERATIONS

ELECTRIC HEATER SCHEDULE

MARK AREA SERVED MANUF. CAPACITY

MODEL

NUMBER

DIMENSIONS

FINISH MOUNTING ADDITIONAL DETAILS

WIDTH HEIGHT DEPTH

EH-101 ENTRY VEST. 101 KING 1500 W LPWA 13 7/8" 23 1/4" 3 3/4" ALUM. WALL-RECESSED SEE BELOW

EH-106 VEST. BREAKOUT 106 KING 1500 W LPWA 13 7/8" 23 1/4" 3 3/4" ALUM. WALL-RECESSED SEE BELOW

EH-126 STAIR 2 126 KING 1500 W LPWA 13 7/8" 23 1/4" 3 3/4" ALUM. WALL-RECESSED SEE BELOW

EH-128 VESTIBULE KING 1500 W LPWA 13 7/8" 23 1/4" 3 3/4" ALUM. WALL-RECESSED SEE BELOW

EH-139 BREAKROOM 139 KING 1500 W LPWA 13 7/8" 23 1/4" 3 3/4" ALUM. WALL-RECESSED SEE BELOW

EH-302 MECHANICAL 302 KING 4000 W LPWA 13 7/8" 23 1/4" 3 3/4" ALUM. SURFACE CAN SEE BELOW

ACCESSORIES:

1. PROVIDE TRANSFORMERS AND RELAYS AS REQUIRED FOR LOW-VOLTAGE CONTROL.

2. INTEGRAL DISCONNECTING MEANS AND OVERLOADS

3. INTEGRAL FAN

NOTES: 1. THIS IS A GENERAL DIFFUSER SCHEDULE. NOT ALL OF THE NECK SIZES ARE INDICATED. REFER TO THE PLAN SHEET(S) FOR SIZES AND QUANTITIES.

2. PROVIDE MANUAL BALANCING DAMPER AT ALL LOCATIONS WHERE A SPECIFIED AIR VOLUME IS REQUIRED.

* OBD: OPPOSED BLADE DAMPER

GRILLE, REGISTER AND DIFFUSER SCHEDULE

MARK TYPE FACE SIZE NECK SIZE FUNCTION MANUFACTURER

MODEL

NUMBER MOUNTING MATERIAL FINISH *OBD REMARKS

1 LINEAR SLOT DIFFUSER, 3 ROWS OF 1 INCH SLOTS 4 FT. 9"/5" SUPPPLY KRUEGER 1910 LAY-IN PANEL & FRAME ALUMINUM WHITE NO INCLUDE 48" 1900BOOT

2 LINEAR SLOT DIFFUSER, 3 ROWS OF 1 INCH SLOTS 4 FT. 8.25"x4" RETURN KRUEGER 1910 LAY-IN PANEL & FRAME ALUMINUM WHITE NO INCLUDE 48" 1900BOOT RR

3 PERFORATED CEILING DIFFUSER, 4-WAY 24"x24" VARIES SUPPLY KRUEGER 6600 LAY-IN PANEL & FRAME STEEL WHITE NO SEE NOTES

4 PERFORATED CEILING DIFFUSER 24"x24" VARIES RETURN KRUEGER 6690 LAY-IN PANEL & FRAME STEEL WHITE NO SEE NOTES

5 PERFORATED CEILING DIFFUSER 24"x24" VARIES EXHAUST KRUEGER 6690 LAY-IN PANEL & FRAME STEEL WHITE NO SEE NOTES

6 PERFORATED CEILING DIFFUSER, 4-WAY 16"x16" VARIES SUPPLY KRUEGER 6600 LAY-IN PANEL & FRAME STEEL WHITE NO SEE NOTES

7 PERFORATED CEILING DIFFUSER 16"x16" VARIES RETURN KRUEGER 6690 LAY-IN PANEL & FRAME STEEL WHITE NO SEE NOTES

8 PERFORATED CEILING DIFFUSER 16"x16" VARIES EXHAUST KRUEGER 6690 LAY-IN PANEL & FRAME STEEL WHITE NO SEE NOTES

9 DUCT MOUNTED GRILLE, SINGLE DEFLECTION 6"x14" 4"x12" SUPPLY KRUEGER DMGSR DUCT MOUNTED ALUMINUM ALUMINUM YES SEE NOTES

10 DUCT MOUNTED GRILLE, SINGLE DEFLECTION 6"x14" 4"x12" EXHAUST KRUEGER DMGSR DUCT MOUNTED ALUMINUM ALUMINUM YES SEE NOTES

11 SURFACE MOUNTED GRILLE, SINGLE DEFLECTION 12"x8" 12"x8" EXHAUST KRUEGER S480 SURFACE MOUNTED STEEL WHITE NO SEE NOTES

LOUVER SCHEDULE

MARK QTY. MANF.

MODEL

NUMBER FINISH SIZE (WIDTH x HEIGHT) TYPE FUNCTION

MAX

CFM MOUNTING

FREE

AREA

(FT2)

FREE AREA

VELOCITY (FPM)

ΔP

(IN WG) NOTES

L-1 1 RUSKIN ELF6375DX COORDINATE WITH ARCH 52"x32" STATIONARY LOUVER OUTDOOR AIR INTAKE FOR ERV-1 3,500 WALL 6.31 554 0.05 SEE BELOW

L-2 1 RUSKIN ELF6375DX COORDINATE WITH ARCH 52"x32" STATIONARY LOUVER EXHAUST AIR RELIEF FOR ERV-1 2,975 WALL 6.31 471 0.03 SEE BELOW

L-3 2 RUSKIN ELF6375DX COORDINATE WITH ARCH 168"x60" STATIONARY LOUVER OSA INTAKE FOR HP-1 & HP-2 20,000 WALL 41.5 482 0.04 SEE BELOW

L-4 2 RUSKIN ELF6375DX COORDINATE WITH ARCH 168"x32" STATIONARY LOUVER EXHAUST RELIEF FOR HP-1 & HP-2 14,500 WALL 20.7 700 0.06 SEE BELOW

L-5 1 RUSKIN ELF6375DX COORDINATE WITH ARCH 128"x32" STATIONARY LOUVER EXHAUST RELIEF FOR HP-1 & HP-2 11,000 WALL 28.4 703 0.06 SEE BELOW

NOTES:

1. 6" DEPTH LOUVER.

2. DRAINABLE LOUVER.

3. PROVIDE WITH PRIME COAT READY FOR PAINT.

4. PROVIDE BIRD SCREEN & EXTENDED SILL.

5. SEE CONTROL DAMPER SCHEDULE.

CONTROL DAMPER SCHEDULE

MARK QTY. MANF.

MODEL

NUMBER SIZE TYPE FUNCTION MAX CFM MOUNTING ADDITIONAL DETAILS

CD-1 1 RUSKIN CD40 52"x32" HEAVY DUTY AIRFOIL LOW LEAK OUTDOOR AIR INTAKE FOR ERV-1 * NORMALLY OPEN (UNOCCUPIED - CLOSED) 3,500 DUCT SEE BELOW

CD-2 1 RUSKIN CD40 52"x32" HEAVY DUTY AIRFOIL LOW LEAK EXHAUST AIR RELIEF FOR ERV-1 * NORMALLY OPEN (UNOCCUPIED - CLOSED) 2,975 DUCT SEE BELOW

CD-3 2 RUSKIN CD40 168x60" HEAVY DUTY AIRFOIL LOW LEAK OSA INTAKE FOR HP-1 & HP-2 * NORMALLY OPEN (COLD TEMP. - CLOSED) - - DUCT SEE BELOW

CD-4 2 RUSKIN CD40 148x20" HEAVY DUTY AIRFOIL LOW LEAK RECIRC. RELIEF FOR HP-1 & HP-2 * NORMALLY CLOSED - (COLD TEMP. - OPEN) - - DUCT SEE BELOW

CD-5 2 RUSKIN CD40 148x28" HEAVY DUTY AIRFOIL LOW LEAK EXHAUST RELIEF FOR HP-1 & HP-2 * NORMALLY OPEN (COLD TEMP. - CLOSED) - - DUCT SEE BELOW

NOTES:

1. 2-POSITION DAMPER ACTUATORS.

2. LOW VOLTAGE DAMPER ACTUATOR

REMARKS:

CONTRACTOR TO FIELD VERIFY EXACT SIZE OF CONTROL

DAMPER CD-1 & CD-2 TO BE MOUNTED ON LOUVERS PRIOR TO

ORDER/INSTALL.

INDOOR ENERGY RECOVERY VENTILATOR SCHEDULE

MARK MANUFACTURER MODEL

NUMBER TYPE DRIVE SUPPLY

CFM

SUPPLY

ESP

(IN WG)

SUPPLY FAN

HP

EXHAUST

CFM

EXHAUST

FAN

HP

EXHAUST

ESP

(IN WG)

WINTER SUMMER

HEATING

SECTION

COOLING

SECTION

UNIT PHYSICAL DATA

ADDITIONAL DETAILSOUTDOOR AIR EXHAUST OUTDOOR AIR EXHAUST

EAT DB / WB (°F) LAT DB / WB (°F) EAT DB / WB (°F) EAT DB / WB (°F) LAT DB / WB (°F) EAT DB / WB (°F) LENGTH (IN) WIDTH (IN) HEIGHT (IN) WEIGHT (LBS)

ERV-1 RENEWAIRE HE4XINV STATIC PLATE BELT 3,500 1.5 5 2,975 5 1.5 -20 / -21 36.7 / 31.4 70 / 54.4 97 / 63 83.1 / 60.7 75 / 62.6 NONE NONE 81-1/2" 43-5/8" 62" 841 SEE BELOW

CONTROL:

1. FAN SHALL BE CONTROLLED BY WALL-MOUNTED THERMOSTAT

REMARKS

1. ALL FANS TO HAVE PREMIUM EFFICIENCY MOTORS.

EXHAUST FAN SCHEDULE

MARK SERVES MFR MODEL NUMBER

AIRFLOW

(CFM) SONES

E.S.P.

(IN.WC) DRIVE MOUNTING CONTROL WEIGHT (LBS) ADDITIONAL DETAILS

EF-1 ELEVATOR MACHINE ROOM COOK GC-164 185 3.5 .15 DIRECT CEILING THERMOSTAT 15 SEE BELOW

ELECTRICAL DATA:

SEE MEP COORDINATION SCHEDULE

FOR STARTER/DISCONNECT AND ALL

OTHER ELEC. DATA.

ELECTRICAL DATA:

SEE MEP COORDINATION SCHEDULE

FOR STARTER/DISCONNECT AND ALL

OTHER ELEC. DATA.

ELECTRICAL DATA:

SEE MEP COORDINATION SCHEDULE

FOR STARTER/DISCONNECT AND ALL

OTHER ELEC. DATA.

ELECTRICAL DATA:

SEE MEP COORDINATION SCHEDULE

FOR STARTER/DISCONNECT AND ALL

OTHER ELEC. DATA.

0 1 2 3 4 5 6 7 8 9 10 inches

DRAWING NO.

PKG

NO.

SHEET

OF

PROJECT NO.:

REVISIONS:

DESIGNED

TECH. REVIEW

CADD

DESIGNED SUB SHEET NO. TITLE OF SHEET

/1

/2

:0 :0

P

M

M0.3

06.01.18C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

HVAC SCHEDULES

13083

INRC OFFICE BUILDING

PHASE 3

USDA FOREST SERVICE

BJK/JTW

TJB

JTW

P

R E E

NI

GN

ELANOISSEF

O R R

EG

ISTERED

S

T A

TE OF ID

A

H O

WAVERE

K

TYD

O J

DIRECT DIGITAL CONTROL POINTS - VRF SYSTEM

POINT NAME

HARDWARE POINTS SOFTWARE POINTS

NOTES

AI AO BI BO AV BV ADJ. SCH. TRD. ALM. DISP.

VARIABLE REFRIGERANT FLOW SYSTEM, VRF

COMMUNICATIONS MODULE

PROVIDE FACTORY SPECIFIC CONTROLS TO MANAGE ALL FUNCTIONS OF THE VRV

SYSTEM HEAT PUMPS, BRANCH SELECTORS AND FAN COIL UNITS. THE BASIS OF DESIGN

IS DAIKIN 'I-TOUCH MANAGER'. WITH BACNET INTERFACE. TO BE ENABLED BY THE BAS

BACNET INTERFACE

AUTO ENABLE / DISABLE X X X

SEQUENCE OF OPERATION - HVAC 'DOGHOUSE'

DIRECT DIGITAL CONTROL POINTS - ENERGY RECOVERY VENTILATOR

POINT NAME

HARDWARE POINTS SOFTWARE POINTS

NOTES

AI AO BI BO AV BV ADJ. SCH. TRD. ALM. DISP.

ENERGY RECOVERY VENTILATOR, ERV-1

COMMUNICATIONS MODULE PROVIDE STAND-ALONE CONTROLLER BY MANUFACTURER TO CONTROL BLOWERS, AND OA AND EA DAMPERS, WITH FACTORY-MOUNTED ALARMS. ENABLED BY THE BAS. BACNET INTERFACE

AUTO ENABLE / DISABLE X X X

DAMPER - OUTSIDE AIR POSITION SETPOINT X X X X LOW-VOLTAGE (VERIFY) OUTPUT TO DAMPER ACTUATOR

DAMPER - OUTSIDE AIR POSITION X X X DAMPER POSITION FEEDBACK

DAMPER - EXHAUST AIR POSITION SETPOINT X X X X LOW-VOLTAGE (VERIFY) OUTPUT TO DAMPER ACTUATOR

DAMPER - EXHAUST AIR POSITION X X X DAMPER POSITION FEEDBACK

FAN - COMMAND X X X OUTPUT RELAY

FAN - STATUS X X X OUTPUT RELAY

FAN - ALARM X X X DIGITAL SOFTWARE POINT

FILTER - DIFFERENTIAL PRESSURE X X X FILTER DIFFERENTIAL PRESSURE SENSOR

FILTER - DIFFERENTIAL PRESSURE ALARM X X X X ADJUSTABLE SOFTWARE POINT

DIRECT DIGITAL CONTROL POINTS - HVAC 'DOGHOUSE'

POINT NAME

HARDWARE POINTS SOFTWARE POINTS

NOTES

AI AO BI BO AV BV ADJ. SCH. TRD. ALM. DISP.

CONTROL DAMPERS, CD-3, 4, 5

AUTO ENABLE / DISABLE X X X

DAMPER - OUTSIDE AIR POSITION SETPOINT X X X X LOW-VOLTAGE (VERIFY) OUTPUT TO DAMPER ACTUATOR

DAMPER - OUTSIDE AIR POSITION X X X DAMPER POSITION FEEDBACK

DAMPER - EXHAUST AIR POSITION SETPOINT X X X X LOW-VOLTAGE (VERIFY) OUTPUT TO DAMPER ACTUATOR

DAMPER - EXHAUST AIR POSITION X X X DAMPER POSITION FEEDBACK

GAS-FIRED UNIT HEATER, UH-1

TEMPERATURE - SPACE X X X DOGHOUSE INTERIOR TEMPERATURE SENSOR

TEMPERATURE - SPACE SETPOINT X X X ADJUSTABLE SOFTWARE POINT

TEMPERATURE - SPACE ALARM X X X X ADJUSTABLE SOFTWARE POINT

FAN - STATUS X X X OUTPUT RELAY

FAN - ALARM X X X DIGITAL SOFTWARE POINT

GAS VALVE - ENABLE STAGE 1 X X OUTPUT RELAY

GAS VALVE - ENABLE STAGE 2 X X OUTPUT RELAY

REFERENCE

• REFER TO SPEC. SECTION 230900 INSTRUMENTATION AND CONTROL FOR HVAC FOR MORE INFORMATION.

• REFER TO SPEC. SECTION 230993 SEQUENCE OF OPERATIONS FOR HVAC CONTROL FOR MORE INFORMATION.

BUILDING SCHEDULE

• BUILDING SCHEDULE DICTATES OCCUPIED AND UNOCCUPIED PERIODS OF THE BUILDING

• COORDINATE WITH OWNER TO DETERMINE BUILDING SCHEDULE

• BUILDING TO ENTER OCCUPIED PERIOD PRIOR TO BUILDING OCCUPIED TIMES TO ENSURE BUILDING IS AT OCCUPIED TEMPERATURE SETPOINT WHEN OCCUPANTS ARRIVE

SPACE TEMPERATURE CONTROL

• EACH SPACE WITH TEMPERATURE CONTROL SHALL HAVE AN OCCUPIED TEMPERATURE SETPOINT (ADJ.) AND UNOCCUPIED HIGH / LOW LIMIT TEMPERATURE SETPOINTS (ADJ.)

• HVAC EQUIPMENT TO CONDITION EACH SPACE WITH TEMPERATURE CONTROL TO TEMPERATURE SETPOINT DURING OCCUPIED PERIODS

• HVAC EQUIPMENT SHALL ALLOW THE SPACE TEMPERATURE TO FLOAT BETWEEN HIGH AND LOW LIMIT TEMPERATURE SETPOINTS (ADJ.) DURING UNOCCUPIED PERIODS

• EACH SPACE WITH TEMPERATURE CONTROL SHALL HAVE A BUILDING SCHEDULE MANUAL OVERRIDE SWITCH THAT PLACES THE SPACE TEMPERATURE INTO OCCUPIED

TEMPERATURE SETPOINT (ADJ.) AND SERVING HVAC EQUIPMENT INTO OCCUPIED MODE

TEMPERATURE CONTROL PANELS

• SEE PLANS FOR LOCATIONS

• ALL TEMPERATURE CONTROL PANELS ARE TO BE BACKED UP WITH UPS BATTERY BACKUP

TEMPERATURE SENSORS

• SEE PLANS FOR LOCATIONS

• PROVIDE SENSOR TYPE AS SHOWN ON PLANS. IN SOME CASES PROVIDE A NON-ADJUSTABLE, BLANK, WALL PLATE TEMPERATURE SENSOR AND IN SOME CASES PROVIDE AN

ADJUSTABLE SENSOR WITH DISPLAY. REGARDLESS OF WHAT TYPE IS SPECIFIED, RUN ENOUGH CONDUCTORS TO BE ABLE TO USE THE ADJUSTABLE WITH DISPLAY VERSION IN ALL

LOCATIONS IN CASE IT IS DESIRED AT A LATER DATE TO SWITCH.

DIRECT DIGITAL CONTROL POINTS SCHEDULES

DDC POINTS SCHEDULE LEGEND:

HARDWARE POINT SOFTWARE POINTS

AI AO BI BO AV BV ADJ. SCH. TRD. ALM. DISP.

A N

A

LO

G

IN

P U

T

A N

A

LO

G O

U T

P U

T

B

IN

A R

Y

IN

P U

T

B

IN

A R

Y O

U T

P U

T

A N

A

LO

G V

A

LU

E

B

IN

A R

Y V

A

LU

E

A D

JU

S

T A

B

LE

S C

H E

D U

LE

T R

E N

D

A

LA

R M

D

IS

P

LA

Y

DDC POINTS GENERAL NOTES:

A ALARM

C COMMAND

CLG COOLING

CO CARBON MONOXIDE

CO2 CARBON DIOXIDE

CS COMMAND STATUS

CT CURRENT TRANSDUCER

DP DIFFERENTIAL PRESSURE

H HUMIDITY SENSOR

HTG HEATING

NC NORMALLY CLOSED

NO NORMALLY OPEN

P PRESSURE

R RELAY

S STATUS

SP STATIC PRESSURE

SPT SETPOINT

SS SAIL SWITCH

S/S START/STOP

T TEMPERATURE SENSOR

VFD VARIABLE FREQ. DRIVE

ZN ZONE

OTHER ABBREVIATIONS:

ABOVE AN 'ADJUSTABLE' OUTSIDE AIR TEMPERATURE (34°F ):

· CD-3, INTAKE AIR CONTROL DAMPERS (2-TOTAL) - SHALL BE 'OPEN'

· CD-5, RELIEF AIR CONTROL DAMPERS (2-TOTAL) - SHALL BE 'OPEN'

· CD-4, RECIRC. AIR CONTROL DAMPERS (2-TOTAL) - SHALL BE 'CLOSED'

· UH-1, GAS-FIRED UNIT HEATER - SHALL BE DISABLED

BELOW AN 'ADJUSTABLE' OUTSIDE AIR TEMPERATURE (34°F ):

· CD-3, INTAKE AIR CONTROL DAMPERS (2-TOTAL) - SHALL BE 'CLOSED'

· CD-5, RELIEF AIR CONTROL DAMPERS (2-TOTAL) - SHALL BE 'CLOSED'

· CD-4, RECIRC. AIR CONTROL DAMPERS (2-TOTAL) - SHALL BE 'OPEN'

· UH-1, GAS-FIRED UNIT HEATER - SHALL BE CYCLED ON/OFF AND STAGED HEAT AS REQ'D TO

MAINTAIN TEMPERATURE IN DOGHOUSE OF (35°F) - ADJUSTABLE.

FIRST STAGE HEATING SHALL BE ENABLED WHEN SPACE TEMP. DROPS BELOW SETPOINT.

SECOND STAGE HEAT SHALL BE ENABLED WHEN SPACE TEMP. IS NOT SATISFIED AFTER 15 MIN.

ALARMS

· GENERATE ALARM WHEN SPACE TEMPERATURE DROPS BELOW SPACE ALARM SETPOINT (ADJ.)

DIRECT DIGITAL CONTROL POINTS - ELECTRIC HEATERS

POINT NAME

HARDWARE POINTS SOFTWARE POINTS

NOTES

AI AO BI BO AV BV ADJ. SCH. TRD. ALM. DISP.

HEATER OPERATION

AUTO ENABLE / DISABLE X X X OUTPUT RELAY

TEMPERATURE - SPACE X X X SPACE TEMPERATURE SENSOR

TEMPERATURE - SPACE SETPOINT X X X ADJUSTABLE SOFTWARE POINT

TEMPERATURE - SPACE ALARM X X X X ADJUSTABLE SOFTWARE POINT

SEQUENCE OF OPERATION - ELECTRIC HEATERS

NOTE: ALL ELECTRIC HEATERS ARE TO BE CONTROLLED THROUGH THE BUILDING'S DIRECT-DIGITAL AUTOMATION SYSTEM

ELECTRIC HEATERS LISTED BELOW ARE TO FUNCTION AS AUXILIARY HEAT ONLY (PRIMARY HEAT BY VRF FAN COILS)

BELOW AN 'ADJUSTABLE' SPACE TEMPERATURE (60°F):

· EH-101, THERMOSTAT (FC-103), STAGE 2 - SHALL BE ENABLED

· EH-106, THERMOSTAT (FC-143), STAGE 2 - SHALL BE ENABLED

· EH-139, THERMOSTAT (FC-139), STAGE 2 - SHALL BE ENABLED

ELECTRIC HEATERS LISTED BELOW ARE TO FUNCTION AS PRIMARY HEAT FOR SPACES SERVED

BELOW AN 'ADJUSTABLE' SPACE TEMPERATURE (60°F):

· EH-126, THERMOSTAT (EH-126), STAGE 1 - SHALL BE ENABLED

· EH-128, THERMOSTAT (EH-128), STAGE 1 - SHALL BE ENABLED

· EH-302, THERMOSTAT (EH-139), STAGE 1 - SHALL BE ENABLED

ALARMS

· GENERATE ALARM WHEN SPACE TEMPERATURE DROPS BELOW SPACE ALARM SETPOINT (ADJ.)

SEQUENCE OF OPERATION - ENERGY RECOVERY VENTILATOR

SUPPLY FAN:

THE SUPPLY FAN SHALL RUN ANYTIME THE UNIT IS COMMANDED TO RUN BASED ON A SCHEDULE OF BUILDING OCCUPIED HOUS (ADJ.).

ALARMS SHALL BE PROVIDED AS

FOLLOWS:

• SUPPLY FAN FAILURE: COMMANDED ON, BUT THE STATUS IS OFF.

• SUPPLY FAN IN HAND: COMMANDED OFF, BUT THE STATUS IS ON.

• SUPPLY FAN RUNTIME EXCEEDED: STATUS RUNTIME EXCEEDS A USER DEFINABLE LIMIT (ADJ.).

EXHAUST FAN: THE EXHAUST FAN SHALL RUN ANYTIME THE UNIT IS COMMANDED TO RUN BASED ON A SCHEDULE OF BUILDING OCCUPIED HOUS (ADJ.).

ALARMS SHALL BE PROVIDEDAS FOLLOWS:

• EXHAUST FAN FAILURE: COMMANDED ON, BUT THE STATUS IS OFF.

• EXHAUST FAN IN HAND: COMMANDED OFF, BUT THE STATUS IS ON.

• EXHAUST FAN RUNTIME EXCEEDED: STATUS RUNTIME EXCEEDS A USER DEFINABLE LIMIT (ADJ.).

FINAL FILTER DIFFERENTIAL PRESSURE MONITOR:

THE CONTROLLER SHALL MONITOR THE DIFFERENTIAL PRESSURE ACROSS THE FINAL FILTER.ALARMS SHALL BE PROVIDED AS FOLLOWS:

• FINAL FILTER CHANGE REQUIRED: FINAL FILTER DIFFERENTIAL PRESSURE EXCEEDS A USER DEFINABLE LIMIT (ADJ.).

SUPPLY AIR TEMPERATURE:

THE CONTROLLER SHALL MONITOR THE SUPPLY AIR TEMPERATURE.ALARMS SHALL BE PROVIDED AS FOLLOWS:

• HIGH SUPPLY AIR TEMP: IF THE SUPPLY AIR TEMPERATURE IS GREATER THAN 105°F (ADJ.).

• LOW SUPPLY AIR TEMP: IF THE SUPPLY AIR TEMPERATURE IS LESS THAN 45°F (ADJ.).

0 1 2 3 4 5 6 7 8 9 10 inches

DRAWING NO.

PKG

NO.

SHEET

OF

PROJECT NO.:

REVISIONS:

DESIGNED

TECH. REVIEW

CADD

DESIGNED SUB SHEET NO. TITLE OF SHEET

/1

/2

:0 :0

P

M

M0.4

06.01.18C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

HVAC SCHEDULES

13083

INRC OFFICE BUILDING

PHASE 3

USDA FOREST SERVICE

BJK/JTW

TJB

JTW

P

R E E

NI

GN

ELANOISSEF

O R R

EG

ISTERE

D

S

T A

TE OF ID

AH

O

WAVERE

K

TYD

O J

CONTROL TYPE DIVISION OF RESPONSIBILITIES: ELECTRICAL NOTES:

BAS

C

CO2

L

PS

T

UC

NA

FACP

BUILDING AUTO CONTROL

CARBON MONOXIDE DETECTORS

CONTINUOUS OPERATION

LIGHT SWITCH

PRESSURE SWITCH

THEMOSTAT

UNIT CONTROLLER - TIED TO B.A.S.

NOT APPLICABLE

FIRE ALARM CONTROL PANEL

22/22 22/26 23/23 23/26 26/26

FURNISHED AND INSTALLED BY DIV. 22, WIRED BY DIV. 22

FURNISHED AND INSTALLED BY DIV. 22, WIRED BY DIV. 26

FURNISHED AND INSTALLED BY DIV. 23, WIRED BY DIV. 23

FURNISHED AND INSTALLED BY DIV. 23, WIRED BY DIV. 26

FURNISHED AND INSTALLED BY DIV. 26, WIRED BY DIV. 26

1. UNLESS SPECIFICALLY NOTED, ALL FEEDERS

SHALL INCLUDE A FULL SIZE NEUTRAL. IT IS THE

CONTRACTOR'S RESPONSIBILITY TO VERIFY

WITH THE MANUFACTURER OF THE ACTUAL

EQUIPMENT BEING SUPPLIED WHETHER A

NEUTRAL IS REQUIRED PRIOR TO ROUGH-IN.

STARTER/DISCONNECT TYPE NOTES:

FD

CSFD

RVSS

VFD

MSS

MOCP

FW

NA

FUSED DISCONNECT

COMBINATION STARTER/DISCONNECT - HOA

REDUCED VOLTAGE SOLID-STATE

VARIABLE FREQUENCY DRIVE - HOA

MANUAL STARTER SWITCH

MOTOR OVER-CURRENT PROTECTION

FACTORY-WIRED SINGLE PT. CONNECTION

NOT APPLICABLE

1.

2.

3.

4.

5.

6.

7.

8.

INTEGRAL DISCONNECTS AND OVERLOADS

INTEGRAL OVERLOADS

INTEGRAL OVERLOADS, RECEPTACLE

RECEPTACLE

SINGLE POINT CONNECTION

PROVIDE RECEPTACLE AND DATA CONNECTION FOR PANEL

MOUNT ON UNI-STRUT IN FRONT OF UNIT

UNIT PROVIDED WITH REMOTE, FACTORY-WIRED CONTROL

PANEL. DIV 26 TO PROVIDE FIELD-INTERCONNECT CIRCUITS,

PER MANUFACTURER REQUIREMENTS.

GENERAL NOTES:

1. ALL DUCT SMOKE DETECTORS FURNISHED BY DIV. 26, INSTALLED BY DIV. 23 AND WIRED BY DIV. 26. DIV 26 SHALL WIRE

ALL FANS TO SHUT DOWN WHEN ALARM IS INITIATED BY ANY DUCT SMOKE DETECTOR.

M.E.P. COORDINATION SCHEDULE

MARK

LOCATION DESCRIPTION

ELECTRICAL DATA CONTROL

NOTES

STARTER/

DISCONNECT STARTER/DISCONNECT CONTINUED FEEDER

LOAD VOLT-PH TYPE DIV TYPE DIV SIZE

(NEMA)

SWITCH

(AMPS)

FUSE

(AMPS)

ENCLOSURE

(NEMA)

COPPER

WIRE

(AWG)

CONDUIT

(INCHES)

HP2(1)

HVAC DOGHOUSE HEAT PUMP SYST. #2

43.0 MCA 208-3 UC 23/23 - - - - - - #10 3/4"

HP2(2) 43.0 MCA 208-3 UC 23/23 - - - - - - #10 3/4"

HP2(3) 43.0 MCA 208-3 UC 23/23 - - - - - - #10 3/4"

BS13 201 LRG CONF. RM BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS14 237 ECO OPEN OFF. BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS15 203 FWS OFFICE BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS16 210A CORRIDOR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS17 210A CORRIDOR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS18 228 TEC OPEN OFFICE BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS19 224 MED. CONF. RM BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS20 210A CORRIDOR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26

BS21 210A CORRIDOR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26

BS22 228 TEC OPEN OFF. BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26

BS23 230 AQM OPEN OFF. BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26

BS24 210B CORRIDOR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26

BS25 210B CORRIDOR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26

BS26 237 ECO OPEN OFF. BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26

FC201 201 LRG CONF. RM CEILING CASSETTE 0.7 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC202 NEPA PLANNER OFF. CEILING DUCTED 1.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC204 204 FWS OFFICES CEILING DUCTED 1.5 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC205 205 FWS OPEN OFF. CEILING DUCTED 2.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC214 214 SUPERVISORS OFF. CEILING DUCTED 2.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC216 216 FWS OFF. CEILING DUCTED 1.5 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC224 224 MED. CONF. RM CEILING CASSETTE 0.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC225 225 MED. CONF. RM CEILING CASSETTE 0.6 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC226 226 HRM OPEN OFF. CEILING DUCTED 1.6 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC228 228 TEC OPEN OFF. CEILING DUCTED 3.4 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC230 230 AQM OPEN OFF. CEILING DUCTED 3.4 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC231 231 VEG OPEN OFF. CEILING DUCTED 2.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC232 232 PRINT RM CEILING CASSETTE 0.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC234 234 BREAKROOM CEILING DUCTED 2.9 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC237 237 ECO OPEN OFF. CEILING DUCTED 3.4 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

M.E.P. COORDINATION SCHEDULE

MARK LOCATION DESCRIPTION

ELECTRICAL DATA CONTROL

NOTES

STARTER/

DISCONNECT STARTER/DISCONNECT CONTINUED FEEDER

LOAD VOLT-PH TYPE DIV TYPE DIV

SIZE

(NEMA)

SWITCH

(AMPS)

FUSE

(AMPS)

ENCLOSURE

(NEMA)

COPPER

WIRE

(AWG)

CONDUIT

(INCHES)

EWC1 LOBBY 102 WATER COOLER 4.2 A 115-1 NA 22/26 - - - - - - #12 3/4"

EWC2 CORRIDOR 210B WATER COOLER 4.2 A 115-1 NA 22/26 - - - - - - #12 3/4"

L1 - LAVATORY FAUCET FRACT. 115-1 NA 22/22 4 - - - - - - #12 3/4"

UR1 - URINAL FLUSH VALVE FRACT. 12V NA 22/26 - - - - - - #12 3/4"

WC1 - W.C. FLUSH VALVE FRACT. 12V NA 22/26 - - - - - - #12 3/4"

WC2 - W.C. FLUSH VALVE FRACT. 12V NA 22/26 - - - - - - #12 3/4"

DWH1 DOM. WATER HEATER

ERV-1 MECHANICAL 302 ENERGY RECOV. VENT.

14.5 FLA 208-3 BAS 23/23 FAN 1 VFD 23/26 - - - - - -

14.5 FLA 208-3 BAS 23/23 FAN 1 VFD 23/26 - - - - - -

EH-101 ENTRY VEST. 101 ELECT. WALL HEATER 1500 W 120-1 T 23/26 1 - - - - - - #12 3/4"

EH-106 VEST. BREAKOUT 106 ELECT. WALL HEATER 1500 W 120-1 T 23/26 1 - - - - - - #12 3/4"

EH-126 STAIR 2 126 ELECT. WALL HEATER 1500 W 120-1 T 23/26 1 - - - - - - #12 3/4"

EH-128 VESTIBULE 128 ELECT. WALL HEATER 1500 W 120-1 T 23/26 1 - - - - - - #12 3/4"

EH-139 BREAKROOM 139 ELECT. WALL HEATER 1500 W 120-1 T 23/26 1 - - - - - - #12 3/4"

EF-1 ELEV. MACHINE ROOM CEILING EXH. FAN FRACT. 120-1 T 23/23 MSS 26/26 - - - -

UH-1 HVAC DOGHOUSE GAS UNIT HEATER 1/2 HP 120-1 T 23/26 1 - - - - - - #12 3/4"

HP1(1)

HVAC DOGHOUSE HEAT PUMP SYST. #1

61.9 MCA 208-3 UC 23/23 - - - - - - #10 3/4"

HP1(2) 43.0 MCA 208-3 UC 23/23 - - - - - - #10 3/4"

HP1(3) 38.0 MCA 208-3 UC 23/23 - - - - - - #10 3/4"

BS1 135 LAW OFF. (BLM) BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS2 113 CORR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS3 113 CORR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS4 120 BLM OFFICE BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS5 114 MED. CONF. RM. BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS6 113 CORR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS7 113 CORR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS8 105 LG. MTG. RM. BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS9 102 LOBBY BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS10 102 LOBBY BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS11 113 CORR BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

BS12 105 LG. MTG. RM. BRANCH SELECTOR 0.1 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC103 103 RECEP. / LOBBY CEILING DUCTED 1.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC104 104 MED. CONF. RM CEILING CASSETTE 1.4 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC105a 105 LG. MTG. RM. (NORTH) CEILING DUCTED 9.0 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC105b 105 LG. MTG. RM. (SOUTH) CEILING DUCTED 9.0 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC114 114 MED. CONF. RM. CEILING CASSETTE 0.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC117 117 BLM OFFICES CEILING DUCTED 1.6 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC122a 122 BLM OPEN OFF. CEILING DUCTED 2.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC122b 122 BLM OPEN OFF. CEILING DUCTED 1.5 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC123 123 FMO OPEN OFF. CEILING DUCTED 1.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC127 127 CIO OFF. CEILING DUCTED 0.6 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC131 131 LAW ENF. OFF. CEILING DUCTED 3.4 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC136 136 BLM OPEN OFF. CEILING DUCTED 2.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC137 137 PRINT ROOM CEILING CASSETTE 0.9 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC139 139 BREAKROOM CEILING DUCTED 2.8 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

FC143 143 FHP OPEN OFF. CEILING DUCTED 3.4 A 208-1 UC 23/23 MSS 26/26 - - - - #12 3/4"

0 1 2 3 4 5 6 7 8 9 10 inches

DRAWING NO.

PKG

NO.

SHEET

OF

PROJECT NO.:

REVISIONS:

DESIGNED

TECH. REVIEW

CADD

DESIGNED SUB SHEET NO. TITLE OF SHEET

/1

/2

:0 :0

P

M

M0.5

06.01.18C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

MEP COORDINATION SCHEDULE

13083

INRC OFFICE BUILDING

PHASE 3

USDA FOREST SERVICE

BJK/JTW

TJB

JTW

P

R E E

NI

GN

ELANOISSEF

O R R

EG

ISTERE

D

S

T A

TE OF ID

AH

O

WAVERE

K

TYD

O J

A B

C

UP

MECHANICAL

ROOM

ELEV.

FOYER

STORAGE

BUILDING

STORAGE

TEL/COMM

M5.0

M5.0

12"x10"

8"ø

10"ø

10"x12" 6"ø

M5.0

M5.0

3 4 5

C

B

TYP.2

TYP.2

TYP.2

8"ø

EF-1

- -EMR

003A

6"ø 9

KEY NOTES:

HVAC GENERAL NOTES:

1. IT IS ABSOLUTELY NECESSARY FOR ALL TRADES INVOLVED TO COORDINATE WITH

EACH OTHER AND VERIFY THAT THERE ARE NO CONFLICTS IN LOCATION OF

DUCTS, CONDUITS, DIFFUSERS, BOXES AND OTHER ITEMS THROUGHOUT THIS

PROJECT BEFORE FINAL PLACEMENT OF MATERIALS.

2. ALL DIMENSIONS AND EXACT UNIT LOCATIONS ARE TO BE FIELD VERIFIED. THESE

DRAWINGS REPRESENT SCHEMATIC SYSTEMS.

3. PROVIDE SEISMIC BRACING OF ALL EQUIPMENT, PIPING, AND DUCTWORK AS

REQUIRED BY LOCAL CODES.

4. COORDINATE AVAILABLE SPACE FOR EQUIPMENT AND PIPING SYSTEMS WITH

OTHER TRADES. REFER TO ARCHITECTURAL, STRUCTURAL, PLUMBING, AND

ELECTRICAL DRAWINGS AND FIRE PROTECTION SHOP DRAWINGS FOR ADDITIONAL

DETAILS NECESSARY FOR COORDINATION.

5. ALL DUCT AND PIPING IS SCHEMATICALLY DRAWN AND COORDINATION BETWEEN

TRADES MUST BE DONE FOR PROPER EQUIPMENT, PIPING, AND DUCTWORK

PLACEMENT AND DESIGN.

6. FOLLOW MANUFACTURES WRITTEN INSTALLATION INSTRUCTION FOR RUNNING

THE COMBUSTION AIR AND VENT PIPING AS WELL AS THE TERMINATION THROUGH

THE ROOF. FOLLOW ALL SAFETY INSTRUCTIONS.

7. COORDINATE ALL CONCRETE PENETRATIONS WITH STRUCTURAL DRAWINGS TO

VERIFY HOW AND WHERE CONCRETE CAN BE CUT.

8. ALL PIPING THAT IS EXPOSED MUST BE PAINTED TO MATCH SURROUNDINGS.

9. MECHANICAL CONTRACTOR SHALL FIRE SEAL ALL PIPING AND DUCTWORK PASSING

THROUGH RATED CONSTRUCTION.

0 1 2 3 4 5 6 7 8 9 10 inches

DRAWING NO.

PKG

NO.

SHEET

OF

PROJECT NO.:

REVISIONS:

DESIGNED

TECH. REVIEW

CADD

DESIGNED SUB SHEET NO. TITLE OF SHEET

/1

/2

:0 :0

P

M

M2.0

06.01.18C O

N S

T R

U C

T

IO

N D

O C

U M

E N

T S

LOWER LEVEL HVAC PLAN

13083

INRC OFFICE BUILDING

PHASE 3

USDA FOREST SERVICE

BJK/JTW

TJB

JTW

: 1/8" = 1'-0"M2.0

9 LOWER LEVEL HVAC PLAN

1. VENTILATION SUPPLY AND EXHAUST DUCTS UP IN CHASE.

2. HOLD DUCTWORK AS HIGH TO CEILING AS POSSIBLE.

3. CEILING MOUNTED EXHAUST FAN (AS SCHEDULED); CONTROLLED BY WALL-

MOUNTED THERMOSTAT. FAN NOT TIED TO BUILDING AUTOMATION SYSTEM.

4. DUCT EXHAUST FROM ELEVATOR EQUP'T ROOM TO ADJACENT ROOM AND

TERMINATE WITH WALL-MOUNTED GRILLE (MOUNT HIGH). PROVIDE SEPARATE

INTAKE GRILLE FOR MAKE-UP AIR (MOUNT 12" A.F.F.). PROVIDE FIRE DAMPERS

AT BOTH WALL PENETRATIONS.

5. FIRE SMOKE DAMPER MOUNTED AT SHAFT PENENTRATION. MATCH DUCT SIZE.

COORD. 120V POWER WITH ELECT. CONTRACTOR.

P

R E E

NI

GN

ELANOISSEF

O R R

EG

ISTERE

D

S

T A

TE OF ID

AH

O

WAVERE

K

TYD

O J

UP

B

C

R E

F

UP

DN

T T

T

T

T

T T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

FC-131

FC-127

EH-126

FC-123

FC-122bFC-122a

FC-137

EH-139

FC-139

FC-105b

FC-105a

FC-103

EH-106

FC-114

FC-104

122b

122a

105b

105a

EH-101

EH-128

M5.0

FC-117

FC-136

FC-143

"x

18"x10"

"x

"x

6"ø

44"x10"

8"ø

"x

"x

"x

"x

M5.0

M5.0

M5.0

"x

8"

"x

12"x10"

18"x20"

10"ø

10"ø

8"ø

52"x10"

10"ø

10"ø

12"x10"

14"x14"

6"ø

8"ø

10"ø

6"ø

14"x24"

12"x12"

6"ø

6"ø 8"ø

"x

M5.0

6"ø

M5.0

HP-2

HP-1

M5.0

1 2 3 4 5 6 7

E

D

C

B

A

20"x10"

20"x10"

20"x10"

8"ø 8"ø

10"x10" 10"x10"

14"x10"

14"x10"

160 6

10"ø

"x

6"ø

4 3

7 7

8"ø

TYP.7

10"ø

TYP.7

TYP.7

TYP.7

TYP.3 TYP.3

TYP.3

TYP.3

6"ø

TYP.4

TYP.4 TYP.2

TYP.3

TYP.2 TYP.3

8"ø

8"ø

8"ø

10"ø

10"ø

8"ø

6"ø 6"ø

8"ø

6"ø

6"ø

8"ø

6"ø

6"ø

8"ø

TYP.4

TYP.4

8"ø

6"ø

6"ø

TYP.3

8"ø

"x

8"

"x

8"

TYP.4

8"ø

12"x10"

10"x10"

8"ø

8"ø

TYP.5

TYP.56"ø

6"ø

6"ø

6"ø

TYP.3

TYP.2

10"ø

8"ø

8"ø

6"ø

"x

8" 8"ø

8"ø

16"x10"

10"ø

10"ø

TYP.3

TYP.4

"x

8"ø

10"ø

6"ø

"x

8"x10"

6"ø

8"ø

10"x10"

8"ø

6"ø

"x

"x

6"ø

8"ø

UH-1

TYP.2

"x

" 16

"x

"x

8"

30"x8"

"x

18"x10"

"x

L-3

CD-3

L-3

CD-3

EH-128

EH-126

20"x10"

9"/5"

9"/5"

6"ø

9"/5"

8"ø6"ø

MEDIUM

CONFERENCE

ROOM

ENTRY

VEST.

LARGE

MEETING

ROOM

STORAGE

105A

VESTIBULE/

BREAKOUT

FHP

OFFICE

FHP/BLM

STORAGE

FHP

OPEN

OFFICE

MENS

PUBLIC

RESTROOM

WOMENS

PUBLIC

RESTROOM

MENS

RESTROOM

WOMENS

RESTROOM

BREAKROOM

SMALL

CONFERENCE

ROOM /

LACTATION

PRINT

ROO…