12. RB-1_MILLWORK_WALL_FINISHING_SYSTEMS.pdf

Section 09.65.13

RESILIENT WALL BASE

010226 Page 1 of 4

THIS DOCUMENT IS INTENDED AS A SUGGESTED GUIDE FOR CREATING, MODIFYING, OR EDITING YOUR 3-

PART ARCHITECTURAL GUIDE SPECIFICATIONS.

TARKETT WILL NOT BE LIABLE FOR ANY DAMAGES ARISING OUT OF THE USE OF ANY INFORMATION OR

SPECIFICATIONS FOUND IN THIS DOCUMENT.

ENSURE THAT YOU HAVE THE LATEST PUBLICATION FOR THIS SPECIFICATION.

THE SPECIFIER OR DESIGNER IS RESPONSIBLE FOR PRODUCT SELECTION AND ACCURACY OF ALL PROJECT

SPECIFICATIONS, INCLUDING ANY TARKETT INFORMATION OR SPECIFICATIONS USED.

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including General and Supplementary

Conditions and Division 01 Specification Sections, apply to this Section.

1.2 SUMMARY

A. Section Includes:

1. Resilient Wall Base.

1.3 SUBMITTALS

A. Product Data: For each type of product indicated.

B. LEED Submittals:

1. Product Data for Credit EQ 4.1: For adhesives, include printed statement of VOC content and chemical components.

C. Samples for Initial Selection: For each type of product indicated.

D. Samples for Verification: For each type of product indicated, in manufacturer's standard-size samples of each resilient product color, texture, and pattern required.

E. Product Schedule: For resilient products. Use same designations indicated on Drawings.

1.4 QUALITY ASSURANCE

A. Installation Qualification: Contractors for floor covering installation should be experienced in managing commercial flooring projects and provide professional installers, qualified to install the

VHAMACSaechL Text Box

PER SPEC 09 06 00

FINISH CODE: RB-1

DESCRIPTION: PROFILE RUBBER BASE

MANUFACTURER: TARKETT

MANUFACTURER NO.: MW-32-F6

010226 Page 2 of 4 various flooring materials specified. An installer is “qualified” if trained, or a certified by Tarkett or a certified INSTALL (International Standards & Training Alliance) resilient floor covering installer.

B. Mockups: Provide resilient products with mockups specified in other Sections.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Store resilient products and installation materials in dry spaces protected from the weather, with ambient temperatures maintained within range recommended by Tarkett, but not less than 55 deg

F (13 deg C) or more than 85 deg F (29 deg C).

1.6 PROJECT CONDITIONS

A. Install resilient products after other finishing operations, including painting, have been completed.

B. Maintain ambient temperatures within range recommended by Tarkett, but not less than 65 deg F

(18 deg C) or more than 85 deg F (29 deg C) in spaces to receive resilient products during the following time periods:

1. 48 hours before installation.

2. During installation.

3. 48 hours after installation.

C. Maintain the ambient relative humidity between 40% and 60% during installation.

D. Until Substantial Completion, maintain ambient temperatures within range recommended by

Tarkett, but not less than 55 deg F (13 deg C) or more than 85 deg F (29 deg C).

PART 2 - PRODUCTS

2.1 RESILIENT SHEET FLOORING

Manufacturer:

Tarkett North America Phone: (800) 899-8916

30000 Aurora Rd.

Solon, Ohio 44139

Web: www.tarkettna.com

E-mail: info@tarkett.com

2.2 PERFORMANCE REQUIREMENTS

A. Fire-Test-Response Characteristics: For resilient tile flooring, as determined by testing identical products according to ASTM E 648 or NFPA 253 by a qualified testing agency.

1. Critical Radiant Flux Classification: Class I, not less than 0.45 W/sq. cm.

B. Flooring products shall comply with the requirements of the California Department of Public

Health's "Standard Method for the Testing and Evaluation of Volatile Organic Chemical

Emissions from Indoor Sources Using Environmental Chambers."

VHAMACSaechL Callout

SALIENT CHARACTERISTICS

010226 Page 3 of 4

2.3 RESILIENT MILLWORK CONTOURABLE WALL BASE

A. Basis-of-Design Product: Subject to compliance with requirements, provide Johnsonite; A Tarkett

Company; Millwork Reveal product.

B. Product Standard: Meets performance requirements for ASTM F 1861 Standard Specification for

Resilient Wall Base, Type TP, Group 1.

C. For Reveal specify height: 6" (15.24 cm).

D. Specify length: 8 feet (2.4 m).

E. Colors and Patterns: 32 Pebble WG.

F. Test Data:

1. Resistance to light, ASTM F1515: Passes

2. Resistance to chemicals, ASTM F925: Passes

3. ASTM E 648, Standard Test Method for Critical Radiant Flux of 0.45 watts/cm2 or greater, Class 1.

2.4 INSTALLATION MATERIALS

A. Adhesives: as recommended by Tarkett to meet site conditions

1. Tarkett 960 Cove Base Adhesive (Porous applications)

2. Tarkett 946 Premium Contact Bond Adhesive (Non-porous applications)

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine substrates, with Installer present, for compliance with requirements for maximum moisture content and other conditions affecting performance of the work.

B. Verify that finishes of substrates comply with tolerances and other requirements specified in other

Sections and that substrates are free of cracks, ridges, depressions, scale, and foreign deposits that might interfere with adhesion of resilient products.

C. Proceed with installation only after unsatisfactory conditions have been corrected.

3.2 PREPARATION

A. Prepare substrates according to Tarkett's written instructions to ensure adhesion of resilient wall base.

B. Fill cracks, holes, and depressions in substrates with trowelable leveling and patching compound and remove bumps and ridges to produce a uniform and smooth substrate.

C. Move resilient products and installation materials into spaces where they will be installed at least

48 hours in advance of installation.

D. Vacuum clean substrates to be covered by resilient products immediately before installation.

010226 Page 4 of 4

3.3 RESILIENT BASE INSTALLATION

A. Comply with Tarkett's written instructions for installing resilient base.

B. Apply resilient base to walls, columns, pilasters, casework and cabinets in toe spaces, and other permanent fixtures in rooms and areas where base is required.

C. Install resilient base in lengths as long as practicable without gaps at seams and with tops of adjacent pieces aligned.

D. Tightly adhere resilient wall base to substrate throughout length of each piece, with base in continuous contact with horizontal and vertical substrates.

E. Do not stretch resilient base during installation.

3.4 CLEANING AND PROTECTION

A. Comply with Tarkett's written instructions for cleaning and protection of resilient products.

B. Perform the following operations immediately after completing resilient product installation:

1. Remove adhesive and other blemishes from exposed surfaces.

C. Protect resilient products from mars, marks, indentations, and other damage from construction operations and placement of equipment and fixtures during remainder of construction period.

D. END OF SECTION 09.65.13

Tarkett North America Technical Services Department

30000 Aurora Road

Solon, Ohio 44139

800.899.8916 info@tarkettna.com www.tarkett.com © 2024 Tarkett USA Inc. 06/2024

Millwork® Wall Finishing System Product Specification Wallbase, Chair Rail, Corner Guard, and Quarter Round & Shoe Moulding

1. PROPRIETARY PRODUCT/MANUFACTURER

1.1. Proprietary Product: Millwork Wall Finishing System profiles replicate the look of finely milled wood.

1.2. Manufacturer:

1.3. Proprietary Product Description:

1.3.1. Construction: Tarkett Millwork Resilient Wall Base is

manufactured from a proprietary thermoplastic rubber formulation designed specifically to meet the performance and dimensional requirements of ASTM F-1861 Standard Specification for Resilient Wall Base, Type TP, and Group 1.

1.3.2. Physical Characteristics (Millwork Wallbase):

Style Dimension Per Carton

Pcs. LF Lbs.

Ambassador

(MW-XX-K)

3/8” x 4” x 8’ (9.52mm x 10.16cm x 2.44m)

(14.6m)

34.8 (15.8 kg)

Attaché

(MW-XX-E)

¼” x 6”x 8’ (6.35mm x 15.24cm x 2.44m)

8 64 (19.5m)

51.7 (23.5 kg)

Delineate

(MW-XX-T)

0.4” x 4 ¼” x 8’ (10.2mm x 10.8cm x 2.44m)

(14.6m) 43.2

(19.6 kg)

Diplomat

(MW-XX-A)

3/8” x 4 ½” x 8’ (9.52mm x 11.43cm x 2.44m)

6 48 (14.6m)

43.2 (19.6 kg)

Equinox

(MW-XX-R)

3/8” x 4 ½” x 8’ (9.53mm x 11.43 cm x 2.44m)

(12.2 m)

(20.4 kg)

Exhibit

(MW-XX-FS)

¼” x 4 ¼” x 8’ (6.35mm x 10.8cm x 2.44m)

8 64 (19.5m)

46.5 (21.1 kg)

Exhibit

(MW-XX-FS6)

¼” x 6”x 8’ (6.35mm x 15.24cm x 2.44m)

(19.5m)

(27.7 kg)

Exhibit

(MW-XX-FS8)

¼” x 8” x 8’ (6.35mm x 20.32 cm x 2.44m)

4 32 (9.8m)

(20.0 kg)

Inflection

(MW-XX-G)

3/8” x 5 ¼” x 8’ (9.52mm x 13.34 cm x 2.44m)

(14.6m)

(28.1 kg)

Ledge

(MW-XX-X62)

0.35” x 6” x 8’ (8.89mm x 15.24cm x 2.44m)

(12.2m)

(26.3 kg)

Per Carton

Style Dimension Pcs. LF. Lbs.

Mandalay

(MW-XX H25)

3/8” x 2 ½” x 8’ (9.52mm x 6.35cm x 2.44m)

5 40 (12.2 m)

26.7 (12.1 kg)

Mandalay

(MW-XX-H3)

3/8” x 3” x 8’ (9.52mm x 7.62cm x 2.44m)

(17.1 m) 44.9

(20.4 kg)

Mandalay

(MW-XX-H)

3/8” x 4 ½” x 8’ (9.53mm x 11.43cm x 2.44m)

5 40 (12.2 m)

48.7 (22.1 kg)

Mandalay

(MW-XX-H6)

3/8” x 6” x 8’ (9.53mm x 15.24cm x 2.44m

(9.8 m)

53.4 (24.2 kg)

Monarch

(MW-XX-M)

3/16” x 6” x 8’ (4.76mm x 15.24cm x 2.44m)

6 48 (14.6 m)

48.3 (21.9 kg)

Monument

(MW-XX-S25)

¼” x 2.5” x 8’ (6.35mm x 6.35cm x 2.44m)

(19.5m) 29.8

(13.5 kg)

Monument

(MW-XX-S4)

¼” x 4” x 8’ (6.35mm x 10.16cm x 2.44m)

8 64 (19.5m)

(21.8 kg)

Oblique

(MW-XX-N)

3/8” x 3” x 8’ (9.52mm x 7.62cm x 2.44m)

(17.1 m) 41.1

(18.6 kg)

Outline

(MW-XX-D)

5/16” x 3 ½” x 8’ (7.94mm x 8.89cm x 2.44m)

10 80 (24.4 m)

(20.9 kg)

Recessed

(MW-XX-X63)

0.35” x 6” x 8’ (8.89mm x 15.24cm x 2.44m)

(12.2m)

(22.7 kg)

Reveal

(MW-XX-F)

¼” x 4 ¼” x 8’ (6.35mm x 10.8cm x 2.44m)

8 64 (19.5m)

49.7 (22.5 kg)

Reveal

(MW-XX-F6)

¼” x 6” x 8’ (6.35mm x 15.24cm x 2.44m)

(19.5m)

(29.9 kg)

Reveal

(MW-XX-F8)

¼” x 8” x 8’ (6.35mm x 20.32 cm x 2.44m)

4 32 (9.8 m)

47.8 (21.7 kg)

Silhouette

(MW-XX-J)

½” x 4” x 8’ (12.7mm x 10.16cm x 2.44m)

(14.6m) 39.3

(17.8 kg)

Stance

(MW-XX-X60)

0.35” x 4 ½” x 8’ (8.89mm x 11.43cm x 2.44m)

5 40 (12.2m)

(15.0 kg)

Stance

(MW-XX-X61)

0.35” x 6” x 8’ (8.89mm x 15.24cm x 2.44m)

(12.2m)

(20.4 kg)

1.3.3. Physical Characteristics (Chair Rail & Corner Guard):

Style Dimension Per Carton

Pcs. LF Lbs.

Rampart

(CHR-XX-C)

3/8” x 4”x 8’ (9.52mm x 10.16cm x 2.44m)

5 40 (12.2 m)

(16.3 kg)

VBG-XX-C ¼” thick 90 profile with 1 ¼”

(3.18cm) return legs x 8’

(24.4 m)

(13.6 kg)

Tarkett North America Phone

(800) 899-8916 30000 Aurora Rd.

Solon, Ohio 44139 Web: www.tarkett.com E-mail: info@tarkett.com http://www.tarkettna.com/ mailto:info@tarkett.com VHAMACSaechL Rectangle

Tarkett North America Technical Services Department

30000 Aurora Road

Solon, Ohio 44139

800.899.8916 info@tarkettna.com www.tarkett.com © 2024 Tarkett USA Inc. 06/2024

Millwork® Wall Finishing System Product Specification Wallbase, Chair Rail, Corner Guard, and Quarter Round & Shoe Moulding

1.3.4. Physical Characteristics (Quarter Round/Shoe Moulding):

Style Dimension Per Carton

Pcs. LF Lbs.

QTR-XX-A

½” wide x ½” radius x 8’

(12.7mm x 12.7mm x 2.44m) With pre-applied, pressure sensitive adhesive backing

20 160 (48.8 m)

(11.3 kg)

QTR-XX-D

¾” wide x ¾” radius x 8’

(19.05mm x 19.05mm x 2.44m) With pre-applied, pressure sensitive adhesive backing

10 80 (24.4 m)

(12.2 kg)

SHU-XX-A

¼” wide x 1 ½” x 8’

(6.35mm x 3.81cm x 2.44m) With pre-applied, pressure sensitive adhesive backing

(24.4 m)

(8.6 kg)

2. PRODUCT PERFORMANCE AND TECHNICAL DATA

2.2. Millwork Wall Base meets or exceeds the performance

requirements for resistance to heat/light aging, chemicals, and dimensional stability when tested to the methods, as described, in

ASTM F-1861.

2.3. Flexibility: Will not crack, break, or show any signs of fatigue when bent around a 1/4" (6.4 mm) diameter cylinder.

2.4. Chemical resistance (ASTM F 925): Passes – 5% acetic acid, 70% isopropyl alcohol, mineral oil, 5% sodium hydroxide solution, 5% hydrochloric acid solution, 5% sulfuric acid solution, 5% household ammonia solution, and 5.25% household bleach solution

2.5. Resistance to light (ASTM F 1515): ΔE< 8

2.6. Fire Resistance: (ASTM E 648) Critical Radiant Flux (NFPA 253): Class I

2.7. CAN/ULC-S102.2: FSR 48 / SDV 366

3. AVAILABILITY AND COST

For availability and cost contact authorized Tarkett distributors nationwide.

4. INSTALLATION

4.1 See Tarkett Millwork Wall Finishing Systems or Chair Rail installation instructions for complete details.

4.2. Adhesives:

Quarter Round (QTR XX A, QTR XX D) and Shoe Moulding (SHU XX A) are self-stick accessories designed for application to Tarkett Millwork and do not require additional adhesives.

• Tarkett 946 Premium Contact Adhesive (Non-porous surfaces) Application: Brush or roller

Approximate coverage:

Base Height 1 qt. unit: 1 gal. unit:

2.5”

3”

3 ½”

4”

4 ¼”

4 ½”

6”

8”

115-173 lf.

96-144 lf.

81-123 lf.

72-108 lf.

68-102 lf.

64-96 lf.

48-72 lf.

36-54 lf.

692-1034 lf.

576-860 lf.

493-736 lf.

432-646 lf.

407-607 lf.

384-573 lf.

288-430 lf.

215-322 lf.

• Tarkett 960 Cove Base Adhesive (Porous surfaces) Application: 1/8x1/8x1/8 SQ-notch trowel Approximate Coverage:

Base Height 1 gal unit

2.5”

3”

3 ½”

4”

4 ¼”

4 ½”

6”

8”

300-350 lf.

275-325 lf.

230-280 lf.

200-250 lf.

185-235 lf.

175-225 lf.

100-150 lf.

100-125 lf.

5. MAINTENANCE

72 hours after installation is completed, initial maintenance procedures must be implemented in accordance with manufacturer's requirements. Refer to Tarkett Millwork Resilient Wall Base Installation & Maintenance Instructions for complete maintenance details.

6. TECHNICAL SERVICES

Visit us on the web at www.tarkett.com

Contact Technical Support at (800) 899-8916 or E-mail:

Resilient.TechnicalSupport@Tarkett.com

Samples: Submittal samples for verification and approval available upon request from Tarkett. Samples shall be submitted in compliance with the requirements of the contract documents.

Accepted and approved samples shall constitute the standard materials which represent materials installed on the project.

7. LIMITED WARRANTY

Limited 2-year warranty. For complete details, contact Tarkett or an authorized Tarkett distributor.

http://www.tarkettna.com/ mailto:Resilient.TechnicalSupport@Tarkett.com VHAMACSaechL Highlight

2. PRODUCT PERFORMANCE AND TECHNICAL DATA

2.2. Millwork Wall Base meets or exceeds the performance

requirements for resistance to heat/light aging, chemicals, and dimensional stability when tested to the methods, as described, in

ASTM F-1861.

2.3. Flexibility: Will not crack, break, or show any signs of fatigue when bent around a 1/4" (6.4 mm) diameter cylinder.

2.4. Chemical resistance (ASTM F 925): Passes – 5% acetic acid, 70% isopropyl alcohol, mineral oil, 5% sodium hydroxide solution, 5% hydrochloric acid solution, 5% sulfuric acid solution, 5% household ammonia solution, and 5.25% household bleach solution

2.5. Resistance to light (ASTM F 1515): ΔE< 8

2.6. Fire Resistance: (ASTM E 648) Critical Radiant Flux (NFPA 253): Class I

2.7. CAN/ULC-S102.2: FSR 48 / SDV 366

VHAMACSaechL Callout

SALIENT CHARACTERISTICS