01 10 10_Att. 9 - Conceptual Heating & Ventilation Systems Design (1).pdf

A4

WD

Stage Doc.No.Rev. SheetQ-ty DateSignature

SheetsSheet

Explanatory note

Developed by

Controlled by

Checked by

Chief designer 1

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

General explanation note.

Trokhymenko Tostanovska Trokhymenko

Heating and ventilation

52-18-OB

“Kredo Bud-Proekt" Ltd

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

05.19 05.19 05.19

05.19Berdnyk and DSTU-N B.1.1-27:2011;

2. Design is developed according to the current regulatory documents on the territory of Ukraine:

- DBN V. 2.5-67:2013 - “Heating, ventilation and air conditioning”;

-DSTU-N B V.1.1-27:2010 -“Building climatology”;

- DBN V.1.2-7-2008 - “Safety and reliability assurance system for contstruction objects.

- DBN V.1.2-10-2008 - “Noise protection”;

-DBN V.1.1-7-2016 - “Fire safety of construction objects”

Basic requirements to buildings and structures.”

-“Buildings and structures. Residential buildings”- DBN V.2.2-15-2005

- DBN V.2.2-9-2009 - “Public facilities”

- DBN V.2.2-20-2008 - “Buildings and structures. Dormitories”;

Section OB of the design due to major repairs provides for heating and ventilation of the basement, ground and first floors of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine “International interdepartmental multipurpose training center of subunits”.

DBN V.2.2-25-2009 -“Food outlets”.

Designed system is rated for provision of internal air parameters according to the requirements of GOST 12.1.005-88.

Rated parameters of outside air for cold period: to. = -22 °C, inside ti. = +15–22 °C for heating of room according to DBN V.2.2-9-99 and DBN V.2.2-3-97.

Supply source existing external heat network Heating medium of network water is with parameters 95–70 °C. (after heating unit, see section TM).

Heating medium of heating system is water under 95–70 °C.

Heating of basement, ground and first floor rooms of barracks is provided from designed building internal networks. Installation of heating unit and heat distribution manifold is provided in room of boiler room No. 1. Heating system two-pipes with bottom distribution. (basement separate branch). On supply pipelines on distribution manifold (see TM) installation of network is provided

Radiators of type RADIK, type 22 are used as heating devices “KORADO”. for heating systems polypropylene PN 20 pipes are used.

Adjusting of heating systems is done at place by stop valves.

Pipelines slope is not less 0.002.

Pipelines laid in under floor channels of the ground floor should be heat insulated. Pipelines passways through fencing structures to arrange in protective cases. Heating unit to arrange by metal pipes per GOST 10704-91. Water drainage from heating systems is fulfilled into pit located in heating unit room.

Then from pit by means of hand pupm to perimeter pavement.

of pump Wilo-TOP-S50/15DM PN10/6, N=1,100 W, p=2,800 rpm

Heating.

1. Climatic data are accepted according to the requirements of DBN V.2.5-67:2013

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

Sheet

SheetRev. Q-ty Doc.No. Signature Date

Ventilation.

Design provides for planning of ventilation systems of rooms on the first and second floors of the barracks according to construction drawings, technological equipment and task for designing.

Designed ventilation systems are rated for provision of internal air paramaters according to the requirements of GOST 12.1.005-88.

52-18-OB. PZ

Certificates of concealed works should be drawn after erection works completion:

1. Niches readiness for radiators installation,

2. Correctness of slopes, pipes bending, installation of sanitary ware.

3. Correctness of installation and non-faulty of fittings operation, safety devices.

4. Certificate of heating system acceptance.

To provide air exchange in rooms: offices, sleeping areas, dining facility, shops, WC and other special premises design provides for the following supply-exhaust units:

for rooms of basement, ground and first floor of the building design provides for supply ventilation systems with mechanical air draft P1–P14 and exhaust ventilation systems with mechanical air draft V1–V44. Exhsaust systems are also designed with natural air draft VP1–VP11. In supply systems P1, P2, P9, P12 and P13 fans VENTS VLM315ES with electric motors 190 W are used, in supply systems P3 and P10 fan VENTS VKM355-B with electric motor 233 W is used, in supply systems P4, P5 and P6 fan VENTS VKM 450 with electric motor 665 W is used, in supply system P11-fan VENTS VLM400 with electric motor 460 W is used, in supply system P14 fan VENTS VKM100 with electric motor 73 W is used. Supply to boiler rooms is provided by systems P7 and P8 with electric motors VENTS 200VKM with electric motors 154 W.

Exhaust system V1 from technical room to basement provides elimination of air by means of fan VENTS VKM315ES with electric motor 190 W. Exhaust systems V2 and v3-z of vegetable, meat and fish shops eliminate air by means of fans VENTS VKM150 with electric motors 98 W. Air is eliminated from hot shop, flour shop and washing room by system V4 by means of fan VENTS 450VKM with electric motor 665 W.

Air is eliminated from dining hall by systems V5 and V6 by means of fans VENTS 450VKM with electric motors 665 W. Besides, used by equipment air elimination from hot shop is provided by (local pumps) systems V13, V15, V15 by means of fans VENTS VKM355B (V13) and fans VENTS VKM 450 with electric motors 665 W. From WC of the ground and first floors V9, V10, V11, V22, V23 and V24: air elimination is provided by means of fan VENTS VKM 100 with electric motor 73 W (V9) and by means of fans VENTS VKM150 with electric motor 98 W. Exhaust systems V7 and V17 pump out air from sleeping rooms by means of fans VENTS VKM315ES and VENTS VKM400 with ekectric motors 190 W and 460 W. Air is pumped out from classrooms and offices by systems V8 (fan VKM315), V18 (fan VKM150) and V21 (fan VKM200) with motors 190, 98 and 154 W correspondingly.

Air is pumped our from drying room by system V20 by means of fan VKM100 with electric motor 73 W.

Air elimination is also provided by exhaust systems VP1–VP11 with natural draft. For exhaust systems with mechanical and natural draft ventilation ducts are provided made of insulated metal pipes and by means of branch channels 150x150 mm, 200x200 mm, 200x400 mm, 200x450, 250x600 and 250x650 mm. Air ducts of ventilation system are made of galvamized steel class “sch” per

GOST 14918-80.

v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

Sheet

SheetRev. Q-ty Doc.No. Signature Date

NameNo.

Measuring unit Quantity

Technical and economic features

1.

2.

3.

4.

5.

6.

7.

8.

m m m m

9.

Submission of design documentation to insurance fund of documentation of Ukraine

Code per DC 018-2000

Consequence class

Object complexity category not applicable

2,221.1

CC1

II

m

Polypropylene pipe PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

40x6.7 Ø

32x5.4

25x4.2

Ø

Ø

63x10.5 Ø

50x8.3 Ø

224.0

202.0

244.0

180.0

34.0

10.

mPolypropylene pipe PN20 75x12.5 Ø 26.0

52-18-OB.PZ

Air supply and exhaust are fulfilled by means of nonregulated air grids MVMB250, MVM200, MVM150, MVM200x100, MVM 150x100, MVM 100x100 and MVM100. All air ducts out of rooms are insulated by material BestIsol for prevention of condensate accumulation on their surface. (or Technonikol, thickness 30 mm) Ventilation systems shutoff automatically in case of fire.

Natural air supply systems due to airing. Calculation of ventilation systems are given in balance tables (air exhange rate per hour). Steel thickness for air ducts is according to DBN V.2.5-67:2013 depending on air duct size.

Fixing of air ducts to be done by means of typical structures, series 5.904-1.

v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

Sheet

SheetRev. Q-ty Doc.No.SignatureDate

Table of air exchange rate

Room name To supply To exhaust

Quantity of air supply m³/h

Note ro om N o.

mech. mech. natur. natur.

Quantity of air exhaust m³/h

BASEMENT

52-18-OB.PZ

1,250 1,250M M 1,250

Vegetable storeroom01

Vegetable storeroom

Vegetable storeroom

Auxiliary room

Spare parts storeroom

Corridor

Equipment and maintenance

Cooling chamber

Corridor

Corridor

Packing storeroom11

12 Auxiliary room

13 Hoistwell

14 Switchboard room accessories

2 2

2 2

2 2

3002 2- - 302 2- -

101 1- -

1252 2- -

3002 2- -

151 1

V1=1,235

VP1=15

P1=1,250 per balance per balance per balance v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

Sheet

SheetRev. Q-ty Doc.No. SignatureDate

Table of air exchange rate

Room name To supply To exhaust

Quantity of air supply

N o.

mech. mech. natur. natur.

Quantity of air exhaust m³/h ground floor

52-18-OV.PZ

Airlock

Corridor

Staircase

Corridor

Combat training room

WC for women

Personal hygiene room

Office

WC for men

Airlock

Dining hall for 150 seats

Cloakroom

Flour shop

Hot shop

Room for equipment and

Store rooms

Airlock

Washroom for kitchen and

Meat and fish shop

Combat training room

Combat training room

Sleeping room for

Vegetable shop personnel maintenance accessories of dry products ware

Personnel cloakroom

Toilet

Shower room

20x25/20x25 25 pers.

20x25/20x25 25 pers. 25 persons500 500

24x50/24x5024x50/24x50 50 persons1,200 1,200

15 persons

15 persons 3 persons

20x15/20x15 15 pers.

20x15/20x15 15 pers.

20x15/20x15 15 pers.

20x15/20x15 15 pers.

20x3/20x3 3 pers.

20x3/20x3 3 pers.

100100

50 for l.b.

25 for sink 50 for l.b.

25 for bidet 25 for sink

4500 450030x150/30x150 30x150/30x150

1152 2

+4070

2 2 2 2 90 90 750 l.e.

6,100 10,170

2 p.e.60 %

M M

750x6=4,500 l.e.

1,000x4=4,000 l.e.

1,200 l.e.

- - 2 2 15

- - 2 2 50

4 6 315 475 1,500 l.e.

3 4 230 310 3 4 230 310

5 5 140

5 5 45

50 for l.b.

50 for l.b. 50

50 for l.b.25 for sink25 for b.u.

v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

Sheet

SheetRev. Q-ty Doc.No. Signature Date

Table of air exchange rate

Room name To supply To exhaust

Quantity of air supply

N o.

mech. mech. natur. natur.

Quantity of air exhaust m³/h ground floor

52-18-OV.PZ

19,705 21,995M M 2,290

127 Dining-facility manager office

Room for cooks rest

Personnel WC129 Store rooms 130

Loading room131

132 Airlock

Airlock

Premise

Cloakroom for boiler firemen

WC

Corridor

Airlock

Staircase No. 2

Cabinet for tableware

Cabinet for dinner ware

Linen press

Corridor Premise

Shower room of cleaning equipment of boiler room (No. 2) of boiler room (No. 1)

25251 of build. 11

25251 of build. 11 50 for l.b.

50 for l.b. 50

- - 2 2 20

3 3 3 3

3 3 3 3 675 155

+625 -105

50 for l.b.

50 for l.b. 7525 for sink 25 for sink

5 5

5 5

V4=1,500P2=1,300 P3=2,060 P4=4,500 P5=4,905 P6=4,070 P7=625 P8=675

P9=1,200 P10=2,000

V2=310 V3=310

V5=750 V6=4,500 V7=1,200 V8=1,160 V9=175 V10=350 V11=375

V13=1,950 V14=470

21,335M V16=3,500 21,275M

VP2=50

VP3=45

VP4=70

VP5=50

VP6=90

VP7=105

VP8=155

VP9=75

655M

V12=475

V15=4,250

Compensation of supply air (rest 660) by means airing

VP10=15

v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

Sheet

SheetRev. Q-ty Doc.No. Signature Date

Table of air exchange rate

Room name To supply To exhaust

Quantity of air supply

N o.

mech. mech. natur. natur.

Quantity of air exhaust m³/h

1st floor

52-18-OB.PZ

4,330 5,970M M 1,640

Compensation of supply air (rest 255) by means airing

Sleeping area for 201

Training room202

203 Corridor

204 Staircase No. 1

205 Weapon store room

Store room

WC

Washing room

Shower room

Weapon cleaning room

Utility

Drying room for

Commander’s room

Room for preparation

Executive office Room for preparation of soldiers

218 Staircase No. 2

Place for exercises

220 Place for equipment and

221 Place for shoes cleaning

Store room for belongings of personnel for 100 persons special means sergeants for training and personal items uniform and shoes room preparation for training and sports maintenance accessories

24x100/24x100 24x100/24x100

100 persons2,400 2,400 2 2 2 2 520 520

1 1- - 85

2 2- - 160 5 persons 100 10020x5/20x5

5 pers.

20x5/20x5

5 pers.

15 persons 300 30020x15/20x15 15 pers.

20x15/20x15 15 pers.

1 1 50

3 35 5 150 250

2 2 2 2 100 100 375-

50 for l.b.

25 for bidet and b.u.

25 for sink

3 3 5 5

15 persons 300 30020x15/20x15

15 pers.

20x15/20x15

15 pers.

3 persons60 6020x3/20x3 3 pers.

20x3/20x3 3 pers.

2 2- - 135

80x5/80x5 5 pers.

80x5/80x5 5 pers. 400 400

P11=2,800 P12=1,280 P13=1,300 P14=250

5,630M

V17=2,800 V18=520 V19=445 V20=250 V21=760 V22=310 V23=375 V24=425

VP11=85

5,885M

52-18-OB

“Kredo Bud-Proekt” Ltd

Developed by

Controlled by

Checked by

Chief designerTrokhymenko Tostanovska Trokhymenko

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

2.,3

1.

Sheet Note

List of working drawings of main set of OB mark

5.

6.

7.

General data (beginning)

Name

General data (end)

8.

9.

10.

11.

Name

Air temperature

Es tim at ed

Ba ro m et ric

Te m pe ra tu re

A ve ra ge of point ge og ra ph ic la tit ud e, C pr es su re

, g Pa

50 24 900

Stare village of a ir, C hu m id ity fro m y ea r %

Rated parameters of outside air accepted per DBN V.2.5-67:2013 and DSTU-N B V.1.1-27-2010

Consumption of heat kW Name buidlings (structures) of room

Installed power of electric motors kW

Consumption of cold kW

For heating

Volume m³

Periods of year under t°n=C

Adminstrative building for barracks with administration buildings

Main indicators on ventilation drawings, (heating and air conditioning)

-22 -10

For ventilation

For hot water

Total

1859,000 (180) 550 - 9.370 av er ag e

2.8

Period with average daily air temperature

D ur at io n from 17.10 till 11.04

Te m pe ra tu re of a ir, C co ld es t

Te m pe ra tu re of a ir, C d ay

-26 -21

Te m pe ra tu re of a ir, C ho tte st

Te m pe ra tu re of a ir, C d ay co ld es t fiv e d ay s fiv e d ay s ho tte st

+26 +24 76

D ur at io n he at in g of p er io d

<= 8 C d ay s

A ve ra ge

Te m pe ra tu re

C

-0.1

>= 21 C

D ur at io n d ay s

A ve ra ge

Te m pe ra tu re

C

18 20.6

A ve ra ge sp ee d of w in d m /s

7.9

D ur at io n d ay s

A ve ra ge

Te m pe ra tu re

C

(<= 10 C)

(195 0.7) in 8 C

D ur at io n he at in g of p er io d transfer in 10 C transfer

(from 6.10 till 19.04)

D ur at io n he at in g of p er io d

3,591 hours

Q ua nt ity of ra in fa ll pe r y ea r, m m

Name

Reference documents:

Attached documents:

Note

Equipment specification. 52-18-OB.CO V on 16 sheets

List of reference and attached documents

Buildings and structures. Residential buildingsDBN V.2.2-15-2005

Parts of sanitary equipment fixation and

Parts of air ducts fixation

Heating, ventilation and air conditioning series 5.904-51 Hoods and deflectors of ventilation systems series 1.494-21

Adjustable slit grating Grid fixing to air ducts and building structures series 1.494-10

GOST 13448-82 Louvered grille

Internal sanitary engineering systemsDBN D 2.2-16-99, SNiP 3.05.01-85

Ventilation systems. Catalogue VENTS

Designation series 5.904-1

DBN V.2.5-67:2013

series 5.904-51

DBN V. 2.5-67:2013

DBN V.2.2-9-2009 Public facilities

Stage Sheet Sheets Rev. Q-ty Sheet Doc.No. Signature Date

A ve ra ge pe r y ea r, re la tiv e hu m id ity

To ta l so la r r ad ia tio n pe r h ea tin g pe rio d

Mj/m2 horizontal

DBN V.2.2-20-2008 Buildings and structures. Dormitories

General data (beginning)

Heating and ventilation

178 (heater)

1WD 16

General data (continued)

12.

13.

14.

15.

16.

Boryspil district Kyiv region

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

05.19 05.19 05.19

05.19Berdnyk

Plan at elev. -2.640 with heating system marking Plan at elev. +0.000 with heating system marking Plan at elev. +3.300 with heating system marking

Heating system diagram

Plan at elev. -2.670 with ventilation systems marking Plan at elev. +0.000 with ventilation systems marking Plan at elev. +3.300 with ventilation systems marking

DBN V.2.2-25-2009 Food outlets.

Plan at elev. +6.590 with ventilation systems marking. Plan extract on axis 12 and V–Ye at elev.+6.590 Ventilation systems P1–P10 diagrams

Ventilation systems P11–P14, V1–V11 diagrams

Ventilation systems V12–V24 diagram Vemtilation systems VP1–VP11 diagrams

OP on 3 sheets.

pe r y ea r

Rev. Q-ty Sheet Doc. No. Signature Date

Developed by

Controlled by

Checked by

Chief designerTrokhymenko Tostanovska Trokhymenko

In v.

N o.

o f o rig

Si gn at ur e an d d at e

In st

. o f I nv . N o.

General data (continued)

Heating and ventilation Stage Sheet Sheets

Parameters of ventilation and heating systems

Fan Electric motor Heat exchanger Air cooler Filter NoteAir heater Symbol system

Q-ty system

Room name, (process equipment) under service

Type of unit of assembly

Type of fulfilment per explosion proof

N

Scheme of ful-filment Position L, P, n, m/year3 Pa rpm

N, kW n, rpm

Type, of fulfilment per explosion proofing TypeQ-ty N

Temperature of heating C from till

Temperature of heating C from till

Q-ty

Consump-

Q kW tion of heat m, Pa

P

Pa

P Consump-

Q kW tion of cold

Temperature of cooling C from till

Type Q-ty

Pa

P x, 1P1

P2

P5

VKM355-B

VKM315ES1

1,300

2,060

2,780 2,780190

(1,460)

(2,210)

(+12) (+22) -10 +161 12 (2x6)

VKM315ES

P3

1,250 (1,460) 190350 2,780 2,780

1,375 1,375

Filter G3 1 Filter F7 1 Filter G3 1 Filter F7 1 Filter G3 1 Filter F7 1

12 (2x6)(+12) (+22) -10 +161

(+12) (+22) -10 +161

VKM315-ES

P14

V1

V2

V3

V4

V5

Filter G3 1 Filter F7 1(+12) (+22)

-10 +161P4

(+12) (+22) -10 +161 Filter G3

Filter F7

Corridor (basement) per

Hot shop, meat and fish, Hot shop, flour shop VKM450 4,905 350 665(5,260) 1,265 1,265

P7

P8

P9

P10 P11

Dining hall for 150 seats VKM450 4,500 (5,260) 350 6651,265 1,265

Filter G3 Filter F7

V6

1,235 350 190(1,460) 2,780 2,780

V7

V8

V9

V10

P6 1 VKM450 4,970

(5,260) 350 6651,265 1,265

P12

(+12) (+22) -10 +161

18 (2x9)

VKM315ES

VKM200

1,200

2,375(950)

(1,460)

VKM200 625

(950) 250 2,375

2,780

Boiler room No. 2

Sleeping area for 50

Classrooms, corridors

VKM355Á

2,000 350(2,210) 1,375

Sleeping area

VKM400 2,800

(3,050) 350 1,370 Training rooms VKM315ES 1,280

(1,460) 350 2,780

2,375154

154 2,375

2,780

233 1,375

460 1,370

190 2,780

(+12) (+22) -10 +161

(+12) (+22) -10 +161

(+12) (+22) -10 +161

(+12) (+22) -10 +161

18 (2x9) Filter G3 Filter F7 1 Filter G3 Filter F7 Filter G3 Filter F7 Filter G3 Filter F7

(270) 73250 2,830 2,830

Technical room (basement)

Vegetable shop VKM150 310

(555) 250 2,705 2,70598

Flour shop

1,375233

190 2,780Sleeping area

VKM315-ES 1,160

350 190(1,460) 2,780 2,780Rooms (for training)

VKM100 175 250 73(270)

2,830 2,830 Personal hygiene room

WC for man (gr. floor) VKM150 350

(555) 250 2,705 2,70598

2WD

52-18-OB

“Kredo Bud-Proekt” Ltd

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

05.19 05.19 05.19

05.19Berdnyk balance

Corridor (ground floor) per balance, cloakroom Room shop, vegetable shop

Washing room 18 (2x9)

Dining hall for 150 seats

Boiler room No. 1

18 (2x9)

18 (2x9) men (for personnel)

Cloakroom for 100 persons (for personnel) 18 (2x9)

18 (2x9)

Training room 12 (2x6)

P13

Drying room, utility room VKM100 (+12) (+22)

-10 +161 4

Filter G3 Filter F7

Filter G3 Filter F7

Corridor (first floor) per balance VKM315ES 1,300

(1,460) 350 2,780 190 2,780 (+12) (+22) -10 +161 12 (2x6)

Meat and fish shop VKM150 310

(555) 250 2,705 2,70598

VKM355-B 1,500

350(2,210) 1,375

VKM200

250 2,375(950) 2,375154

Washing room

Dining hall for 150 seats 4,500

(5,260) 350 6651,265 1,265VKM450

for personnel for 50 persons

VKM315-ES 1,200

350(1,400) 2,780

WC for women (gr. floor)

V11 1 WC for men (gr. floor) VKM150 375

(555) 250 2,705 2,70598

(per balance)

(gr. floor) unit

Rev. Q-ty Sheet Doc. No. Signature Date

Controlled by

Checked by

Chief designerTrokhymenko Tostanovska Trokhymenko

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

General data (continued)

Heating and ventilation Stage Sheet Sheets

Parameters of ventilation and heating systems

Fan Electric motor Heat exchanger Air cooler Filter NoteAir heater Symbol system

Q-ty system

Room name, (process equipment) under service

Type of unit of assembly

Type of fulfilment per explosion proof

N

Scheme of ful-filment Position L, P, n, m/year3 Pa rpm

N, kW n, rpm

Type, of fulfilment per explosion proofing TypeQ-ty N

Temperature of heating C from till

Temperature of heating C from till

Q-ty

Consump-

Q kW tion of heat m, Pa

P

Pa

P Consump-

Q kW tion of cold

Temperature of cooling C from till

Type Q-ty

Pa

P x, 1V12

V13

V16

VKM150

VKM355B1

1,950

1,375 1,375233

(2,210)

(555)

VKM150

V14

(555) 98250 2,705 2,705

2,705 2,705

V24

V15

Washing room

Hot shop s.v.

VKM450 4,250 350 665(5,260) 1,265 1,265

V18

V19

V20

V21 V22

665 1,265

V17 1 Sleeping area for 150 VKM400 2,800 (3,050) 350 4601,370 1,370

V23

VKM150

2,705(555)

(270)

VKM150 520

(555) 250 2,705

2,830

Training room

Rooms (technical purpose)

VKM200 760

250(950) 2,375

Drying room VKM100

(555) 250 2,705

Training rooms

VKM150 375

(555) 250 2,705

2,70598

98 2,705

2,830

154 2,375

98 2,705

98 2,705

WC VKM150 425

(555) 98250 2,705 2,705

3WD

52-18-OB

“Kredo Bud-Proekt” Ltd

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

05.19 05.19 05.19

05.19Berdnyk

Hot shop (general exch.)

Hot shop s.v.

VKM450Hot shop s.v.

3,500 350(5,260) 1,265 beds for personnel

Washing room

WC

and shower rooms VKM150 310 unit

Controlled by

Checked by

Chief designerTrokhymenko Tostanovska Trokhymenko

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

Rev. Q-ty Sheet Doc. No. Signature Date

General data (end)

Heating and ventilation 4WD

Stage Sheet Sheets

Designed system is rated for provision of internal air parameters according to the requirements of

GOST 12.1.005-88.

Rated parameters of outside air for cold period: to. = -°22C, internal ti. = +15–22 °C for heating of room according to DBN V.2.2-9-99 and DBN V.2.2-3-97.

Supply source existing external heat network Heating medium of network water is with parameters 95–70 °C. (after heating unit, see section TM).

Heating medium of heating system is water under 95–70 °C.

Heating of basement, ground and first floor rooms of barracks is provided from designed building internal networks. Installation of heating unit and heat distribution manifold is provided in boiler room No. 1. Heating system two-pipes with bottom distribution. (basement separate branch).

On supply pipelines on distribution manifold (see TM) installation of network is provided

Radiators of type RADIK, type 22 are used as heating devices “KORADO”. for heating systems polypropylene PN 20 pipes are used.Adjusting of heating systems is done at place by stop valves.

Pipelines slope is not less 0.002.

Pipelines laid in under floor channels of the ground floor should be heat insulated. Pipelines passways through fencing structures to arrange in protective cases.

Heating unit to arrange by metal pipes per GOST 10704-91. Water drainage from heating systems is fulfilled into pit located in heating unit room. Then from pit by means of hand pupm to perimeter pavement. Certificates of concealed works should be drawn after erection works completion:

1. Niches readiness for radiators installation,

2. Correctness of slopes, pipes bending, installation of sanitary ware.

3. Correctness of installation and non-faulty of fittings operation, safety devices.

4. Certificate of heating system acceptance.

of pump Wilo-TOP-S50/15DM PN10/6 , N=1,100 W, p=2,800 rpm

Heating.

General data

DSTU-N B.1.1-27:2011;

2. Design is developed according to the current regulatory documents on the territory of Ukraine:

- DBN V. 2.5-67:2013 - “Heating, ventilation and air conditioning”;

-DSTU-N B V.1.1-27:2010 - “Building climatology”;

- DBN V.1.2-7-2008 - “Safety and reliability assurance system for contstruction objects. Main

- DBN V.1.2-10-2008 - “Noise protection”;

-DBN V.1.1-7-2016 - “Fire safety of construction objects” requirements to buildings and structures.”

- “Buildings and structures. Residential buildings”- DBN V.2.2-15-2005

- DBN V.2.2-9-2009 - “Public facilities”

- DBN V.2.2-20-2008 - “Buildings and structures. Dormitories”;

Section OB of the design due to major repairs provides for heating and ventilation of the basement, ground and first floors of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine "International interdepartmental multipurpose training center of subunits”.

for rooms of basement, ground and first floor of the building design provides the supply ventilation systems with mechanical air draft P1P14 and exhaust ventilation systems with mechanical air draft V1–V44. Exhsaust systems are also designed with natural air draft VP1–VP11. In supply systems P1, P2, P9, P12 and P13 fans VENTS VKM315ES with electric motors 190 W are used, in supply systems P3 and P10 fan VENTS VKM355-B with electric motor 233 W is used, in supply systems P4, P5 and P6 fan VENTS VKM 450 with electric motor 665 W is used, in supply system P11fan VENTS VKM400 with electric motor 460 W is used, in supply system P14 fan VENTS VKM100 with electric motor 73 W is used. Supply to boiler rooms is provided by systems P7 and P8 with electric motors VENTS 200VKM with electric motors 154 W.

Exhaust system V1 from technical room to basement provides elimination of air by means of fan VENTS VKM315ES with electric motor 190 W. Exhaust systems V2 and v3-z of vegetable, meat and fish shops eliminate air by means of fans VENTS VKM150 with electric motors 98 W.

Air is eliminated from hot shop, flour shop and washing room by system V4 by means of fan VENTS 450VKM with electric motor 665 W.

Air is eliminated from dining hall by systems V5 and V6 by means of fans VENTS 450VKM with electric motors 665 W. Besides, used by equipment air elimination from hot shop is provided by (local pumps) systems V13, V15, V15 by means of fans VENTS VKM355B (V13) and fans VENTS VKM 450 with electric motors 665 W. From WC of the ground and first floors V9, V10, V11, V22, V23 and V24: air elimination is provided by means of fan VENTS VKM 100 with electric motor 73 W (V9) and by means of fans VENTS VKM150 with electric motor 98 W.

Exhaust systems V7 and V17 pump out air from sleeping rooms by means of fans VENTS VKM315ES and VENTS VKM400 with ekectric motors 190 W and 460 W. Air is pumped out from classrooms and offices by systems V8 (fan VKM315), V18 (fan VKM150) and V21 (fan VKM200) with motors 190, 98 and 154 W correspondingly.

Air is pumped our from drying room by system V20 by means of fan VKM100 with electric motor 73 W.

Air elimination is also provided by exhaust systems VP1–VP11 with natural draft. For exhaust systems with mechanical and natural draft ventilation ducts are provided made of insulated metal pipes and by means of branch channels 150x150 mm, 200x200 mm, 200x400 mm, 200x450, 250x600 and 250x650 mm. Air ducts of ventilation system are made of galvamized steel class “sch” per GOST 14918-80.

Natural air supply systems due to airing. Calculation of ventilation systems are given in balance tables (air exhange rate per hour). Steel thickness for air ducts is according to DBN V.2.5-67:2013 depending on air duct size.

Fixing of air ducts to be done by means of typical structures, series 5.904-1.

Ventilation.

Design provides for planning of ventilation systems of rooms in the basement, on the ground and first floors of the barracks according to construction drawings, technological equipment and task for design.

Designed ventilation systems are rated for provision of inside air parameters according to the requirements of GOST 12.1.005-88.

To provide air exchange in the rooms: offices, sleeping areas, dining facility, shops, WC and other special rooms design provides for the following supply-exhaust units:

Air supply and exhaust are fulfilled by means of nonregulated air grids MVM250, MVM200, MVM150, MVM200x100, MVM 150x100, MVM 100x100 and MVM100. All air ducts out of rooms are insulated by material BestIsol for prevention of condensate accumulation on their surface. (or Technonikol, thickness 30 mm) Ventilation systems shutoff automatically in case of fire.

52-18-OB

“Kredo Bud-Proekt” Ltd

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

05.19 05.19 05.19

05.19Berdnyk

1. Climatic data are accepted according to the requirements of DBN V.2.5-67:2013 and

Breakdown of rooms

Name

Vegetable storeroom01

03 37.69

7 8 10 122 3 9

G

B

Zh

D

Ye

I

6 11

A

K

B

V

E

K

Zh

-2.670

-2.700

01 02 03

05 06 07

09 10 11 12

29.03

Vegetable storeroom 34.10

Vegetable storeroom

63.81Auxiliary room

7.15Spare parts storeroom

39.85Corridor

29.54

Equipment and maintenance accessories room

Cooling chamber

Corridor

3.79

Corridor

25.96

Packing storeroom11 23.78

12 Auxiliary room 63.81

13 Hoistwell 1.49

63,000

2,500

6, 5, 2, 2,800 18,600 9,400 2,400

2, ,2

3,400

4, Cat..

of room Area, m²

Number of room

5,300

2, ,3

6, 3, 6, 8,4009,3002,700

2 3 5 7 111 27,3002,500

3,500

Rev. Q-ty Sheet Doc. No. Signature Date

Stage Sheet Sheets WDDeveloped by

Controlled by

Checked by

Chief designer 05.19Trokhymenko Tostanovska Trokhymenko

05.19 05.19

05.19Berdnyk

“Kredo Bud-Proekt” Ltd

Heating

Plan at elev. -2.640 with marking of heating system

Size A3x4

T2 T1

T2 T1

50x8.3 Ø From the ground floor

50x8.3 Ø

50x8.3 Ø

50x8.3 Ø

50x8.3 Ø

0.003

0.003

T2 T1

0.

0.

Plan at elev. -2.640 with heating system marking

52-18-OB

5,2004,100

14 Switchboard room 3.9

38.89

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

AutoCAD SHX Text 18,600

Size A3x4

7 8 10 121 3 9

G

B

2 3 5 7

Zh

D

Ye

I

0.000

0.000

-0.030

6 11

A

Zh

K K

B

-0.660

-0.030 -0.030

V

E 0.000

-0.900

-0.930

105 106 107

111112

122123

6, 5, 2, 27,3005,2004,1002,50018,6002,800

2,800 18,600 9,400 2,400

3, 2, 60,500

,3

,4

5, 6, 3, 6, 3,5008,4009,3002,7003,400

Rev. Q-ty Sheet Doc.No. Signature Date

Stage Sheet Sheets

WDDeveloped by

Controlled by

Checked by

Chief designer 05.19Trokhymenko Tostanovska Trokhymenko

05.19 05.19

05.19Berdnyk

“Kredo Bud-Proekt” Ltd

Heating

Plan at elev. +0.000 with marking of heating system

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

Plan at elev. +0.000 with heating system marking

KORADO RADIK Klasik type 22 500x400

S.p.1

S.p.2 S.p.3 S.p.4 S.p.5

S.p.6

S.p.7 S.p.8 S.p.9 S.p.10

S.p.11

S.p.12

S.p.13S.p.14S.p.15S.p.16

S.p.17S.p.18S.p.19S.p.20S.p.21S.p.22

S.p.24

S.p.24

S.p.23

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x800 KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x1000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000 KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800 KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000 KORADO RADIK Klasik type 22 500x600 KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x400

KORADO RADIK Klasik type 22 500x400

T2 T1

T2 T1 T2T1

T2 T1

T2 T1

2Ø50x8.3 transfer zØ50/40

0.003 2Ø40x6.70.003 2Ø50x8.3 2Ø40x6.7 transfer zØ50/40

In under floor channel 150x150 (h) 75x12.5 Ø

63x10.5 Ø

63x10.5 Ø

0.

0.003

0.

0.

0.003 transfer zØ50/40 2Ø50x8.3 2Ø40x6.7 2Ø50x8.3 2Ø40x6,7 transfer zØ50/40 T2 T1

In under floor channel 150x150 (h)

52-18-OB

0.000

-0.030

-0.030

137 138

8701, “KT-2E”

Boiler 95 kW “Altep DUO PLUS”

Heating unit (indicative only)

Downdrop to basement 50x8.3 Ø

Breakdown of rooms (end)

Name

Breakdown of rooms (beginning)

Name

Airlock 5.76

Corridor

Staircase 20.72

Corridor

105 Combat training room

107 14.29

108 WC for women

109 Personal hygiene room 4.43

37.27110

111 97.41

113 2.52

7.65

73.06

25.16

Office

25.16

6.76

WC for men

Airlock

Dining hall for 150 seats 156.14

115 19.12Cloakroom

116 17.36Flour shop

71.10Hot shop118

Room for equipment and maintenance accessories 2.39

7.56

Room for dry products storage120

Airlock 3.84

Washroom for kitchen and tableware121 21.96

21.28Meat and fish shop122

Personnel cloakroom124 9.23

WC125 1.08

Shower room126

Dining-facility manager office127

Room for cooks rest128

Personnel WC129

Room for cleaning devices storage130

Loading room131

132 Airlock

Airlock

Boiler room No. 2

Cloakroom for boiler firemen

WC 1.08

Corridor

2.18

8.21

7.77

2.42

3.23

4.08

1.68

1.63

21.58

2.01

33.39

Airlock 3.00

Staircase No. 2 11.60

Combat training room

112 55.97Combat training room

Sleeping area for military personnel

Cabinet for tableware

Cabinet for dinner ware

1.55

Linen press 1.55

1.55

Corridor 1.63

Boiler room No. 1 13.93

Shower room 1.21

24.33Vegetable shop123

Cat.

of room

Area, m²

Number of room

Cat.

of room

Area, m²

Number of room

135 136134

8701, “KT-2E”

Boiler 95 kW “Altep DUO PLUS”

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

Name

Sleeping area for military personnel, 100 persons.201

Training room202

203 Corridor 72.59

204 Staircase No. 1

205 Weapon store room

211 16.98

20.72

25.81

Special means store room 27.01

WC

Washing room

Shower room

37.15

13.11

12.65

Weapon cleaning room

335.06

86.45

22.68

Utility room

16.81Drying room for uniform and shoes drying

Commander’s room 19.32

23.67Room for officers preparation for training

Executive office 17.61

Room for sergeants preparation for training 25.59 of soldiers 17.27

218 Staircase No. 2 20.72

219 Place for exercises and sports 15.28

220 Place for equipment and maintenance accessories 2.19

221 Place for shoes cleaning 1.46

+3.300 +3.250

+1.650

201202 203

212213

214215216217+1.650

+3.300

7 8 102 9

B

3 5 7

Zh

D

Ye

I

6 11

A

Zh

K K

B

V

E

205 207 208 209 210 211

21,100 27,300

6, 6, 2, 5,2004,1002,800

2,800 2,400

3, 2, ,3

,4

5, 6, 3, 6, 3,5008,4009,3002,7003,400

Cat..

of room Area, m²

Number of room

Store room for belongings and personal items

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

Rev. Q-ty Sheet Doc.No. Signature Date

Stage Sheet Sheets

WDDeveloped by

Controlled by

Checked by

Chief designer 05.19Trokhymenko Tostanovska Trokhymenko

05.19 05.19

05.19Berdnyk

“Kredo Bud-Proekt” Ltd

Heating

Plan at elev. +3.300 with marking of heating system

Plan at elev. +3.300 with heating system marking

S.p.1

S.p.2 S.p.3 S.p.4 S.p.5 S.p.7 S.p. 8 S.p.9 S.p.10

S.p.11

S.p.12

S.p.13S.p.14S.p.15S.p.16

S.p.17S.p.18 S.p.19S.p.20S.p.21S.p.22

S.p.25

S.p.23

S.p.6

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000 KORADO RADIK Klasik type 22 500x600 KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x600 KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800 KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x800 KORADO RADIK Klasik type 22 500x1,000 KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x800

52-18-OB

2,500

18,600 9,400

60,500

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

AutoCAD SHX Text D-1

D-1

Rev. Q-ty Sheet Doc.No. Signature Date

Stage Sheet Sheets

WDDeveloped by

Controlled by

Checked by

Chief designer 05.19Trokhymenko Tostanovska Trokhymenko

05.19 05.19

05.19Berdnyk

“Kredo Bud-Proekt” Ltd

Heating

Heating system diagram

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

Heating system diagram (main)

S.p.2 S.p.3 S.p.4 S.p.5 S.p.6 S.p.7

S.p.8 S.p.9 S.p.10

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000 ÊORADO RADIK Klasik type 22 500x1,000 KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x600

S.p.11 KORADO RADIK Klasik type 22 500x800

T2 0.003

T1

S.p.21S.p.22

S.p.23

S.p.1

KORADO RADIK Klasik type 22 500x400

KORADO RADIK Klasik type 22 500x400

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

S.p.24

S.p.20 S.p.19 S.p.18 S.p.17

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

S.p.16 S.p.15

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x800

S.p.14 S.p.13

S.p.12

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

0.003

0.003

0.003

0.0

0.0

0.0

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000 KORADO RADIK Klasik type 22 500x1,000

Unit “A”

Globe radiator cock Dn 15 Thermostatic control valve Dn15 Thermostatic control valve Dn15

Coupling 16x1/2''Coupling 16x1/2'' Globe radiator cock Dn 15Globe radiator cock Dn 15

Coupling 16x1/2''Coupling 16x1/2''

Globe radiator cock Dn 15

S.p.19

T2 T1

Coupling 20x3/4''

T-joint 32x32x20

Ø50x8.3

Ø50x8.3 Ø50x8.3

Ø50x8.3

2Ø63x10.5

541,00

2Ø63x10.5

2Ø75x12.5

2Ø50x8.3 2Ø50x8.3

2Ø50x8.3 2Ø50x8.3

Unit “A”

2Ø40x6.7 2Ø40x6.7

2Ø40x6.7 2Ø40x6.7

To distribution manifold

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x600 KORADO RADIK Klasik type 22 500x800 KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x800

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x1,000

KORADO RADIK Klasik type 22 500x600 transfer zØ50/40 transfer zØ50/40 transfer zØ50/40 transfer zØ50/40

T2 T1

T2 T1T2 T1

In under floor channel 150x150 (h)

In under floor channel 150x150 (h)

In under floor channel 150x150 (h)

75x12.5 Ø

52-18-OB

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine “International interdepartmental

Position Name and technical parameters

Type, grade document mark, of data sheet

Code of equipment, of products of material

Manufacturing plant

Measuring unit

Q-ty Weight units, kg

Notes

1.

2.

SheetsSheet

Stage

WD

Doc.No.Rev. SheetQ-ty DateSignature

Equipment specification and materials

Developed by

Controlled by

Checked by

Chief designer

3.

Trokhymenko Tostanovska

Heating system (main)

32x5.4

25x4.2

Ø

Ø

50x8.3

5.

6.

4.

40x6.7

7.

Ø

Ø rm rm rm rm

224.0

202.0/10.0

92.0/16.0

152.0+20%=

Polypropylene pipe PN20 PN2090x15.0 Ø

75x12.5 Ø

63x10.5 Ø

26.0/12.0rm

34.0/-rm

PN20

PN20

PN20

PN20

PN20

PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

Polypropylene pipe PN20

/including insulated

/including insulated

/including insulated

/including insulated

Heating devices

1. Radiators RADIK, type 22 KORADO Klasik 500x1,000 RADIK type 22 KORADO

Radiators RADIK, type 22 KORADO Klasik 500x800 RADIK type 22 KORADO

Radiators RADIK, type 22 KORADO Klasik 500x600 RADIK type 22 KORADO pcs 33 pcs 21 pcs 16

4.

3.

Radiators RADIK, type 22 KORADO Klasik 500x400 RADIK type 22 KORADO

2.

Thermostatic control valve Dn15 RTD-N-15 pcs 76

1.

Dn40

11s42p

Coupler-joint ball cock, brass

Fittings pcs 82.

Dn15 Globe radiator cock pcs 1523.

Dn65Flanged ball valve, brass pcs 2

4.

11b27p

-rm

Network pump Wilo-TOP-S50/15DM PN10/6, N=1,100 W, p=2,800 rpm 2set Wilo-TOP-S50/15DM PN10/68. from distribution manifold stand pipes supply=180.0 pcs 3 before and after pumps

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

52-18-OB. CO

“Kredo Bud-Proekt” Ltd

05.19 05.19 05.19

05.19

Trokhymenko

Berdnyk

A pp ro ve d installation on the main branch on distribution manifold

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental

(considered)

Sheet

Position

SheetRev. Q-ty Doc.No.Signature Date

2pcs1. Transfer steel/polypropylene

T-joint 63x50x504.

10.

pcs 2

Coupling 20x3/4”'7.

pcs 4

Coupling 16x1/2”' pcs 18

76x3.0/ 75x12.5 Ø Ø

8.

5.

pcs other system elements

6.

2.

3.

transfer Ø50/40

9.

11.

T-joint 75x63x63

T-joint 32x32x20

Flushing and testing of pipelines rm 758.0

T-joint 25x25x20 pcs 24

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

Arrangement of under floor channel 150x150 (h) rm 10.0

Heating system (basement)

52-18-OB. CO

pcs 50 pcs 152

Bleed screw pcs 28

50x8.3 Ø rm 152.0/-PN20Polypropylene pipe PN20 /including insulated1.

Fittings

Dn40Coupler-joint ball cock, brass pcs 411n27p1.

other system elements

2pcsTransfer steel/polypropylene 76x3.0/ 75x12.5 Ø Ø1.

Bleed screw pcs 42.

Flushing and testing of pipelines rm 758.0

3. T-joint 32x32x32 pcs 2

4.

Name and technical parameters

Type, grade document mark, of data sheet

Code of equipment, of products of material

Manufacturing plant

Measuring unit

Q-ty Weight units, kg

Notes

SheetRev. Q-ty Doc.No. Signature Date pcs pcs pcs -

-rm

2pcs

-pcs

1.

Transfer steel/polypropylene transfer

T-joint 63x50x50

4.

10.

pcs 4

Coupling 20x3/4”'

7.

pcs 4

Coupling 16x1/2”'

12.

pcs 28

57x3.0/ 75x12.5 Ø Ø

Ø90/75 transfer Ø75/63

8.

5.

transfer Ø63/50 pcs other system elements

Transfer steel/polypropylene 76x3.0/ 90x15.0 Ø Ø

6.

Transfer steel/steel Ø65/ Ø50

2.

3.

transfer Ø50/40

9.

11.

13.

14.

T-joint 75x63x63

T-joint 32x32x20

T-joint 90x75x75 pcs -pcs 56 pcs 258

Air collectors Ø159x3.5; L=355 mm

Flushing and testing of pipelines

15.

pcs 4 rm 1,028.0

T-joint 25x25x20

Coupling 25x1”' pcs 10 pcs -

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

A pp ro ve d

16.

17.

18. Arrangement of under floor channel 150x150 (h) rm 2.0

52-18-OB. CO

Position Name and technical parameters

Type, grade document mark, of data sheet

Code of equipment, of products of material

Manufacturing plant

Measuring unit

Q-ty Weight units, Name

Vegetable storeroom01

03 37.69

8 9 11 133 3 10

G

B

Zh

D

Ye

I

7 12

A

K

B

V

E

K

Zh

-2.670

-2.700

01 02 03 04

29.03

Vegetable storeroom 34.10

Vegetable storeroom

63.81Auxiliary room

7.15Spare parts storeroom

39.85Corridor

29.54

Equipment and maintenance accessories room

Cooling chamber

Corridor

3.79

38.89Corridor

25.96

Packing storeroom11 23.78

12 Auxiliary room 63.81

13 Hoistwell 1.49

63,000

2,500

6, 5, 2, 2,800 18,600 9,400 2,400

2, ,2

3,400

Cat..

of -room

Area , m²

Number of -room

5,300

6, 3, 6, 8,4009,3002,700

2 3 7 121 27,3002,500

3,500

Rev. Q-ty Sheet Doc.No. Signature Date

Stage Sheet Sheets WDDeveloped by

Controlled by

Checked by

Chief designer 05.19Trokhymenko Tostanovska Trokhymenko

05.19 05.19

05.19Berdnyk

“Kredo Bud-Proekt” Ltd

Ventilation

Plan at elev. -2.670 with marking of ventilation systems

Size A3x4

5,2004,100

3, ,4

5, Plan at elev. -2.670 with ventilation systems marking

-/2 -/2 -/2

-/1

-/2

-/2

-/2

-/2

-135 -160 -175

-300

-30

-10

-300 -125

14 Switchboard room 3.9

-/1 -15

L=1,250 (Lmax=1,460); N=190 W n=2,780 rpm, h=350 Pa

Fan VENTS VKM 315ES

L=1,235 (Lmax=1,460); N=190 W n=2,780 rpm, h=350 Pa

Fan VENTS VKM 315ES

VP1

V1

P1-5

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

52-18-OB

Air intake grid 500x250(h) P1-1

200x400

P1 12 kW (2x6)

150x150

300x300(h)

300x300(h)

200x200(h)200x200(h)

200x400

150x150(h)

150x150(h)

100x150(h)100x150(h)

4MVM150x100 L=160

4MVM150x100 L=175

4MVM200x100 L=300

4MVM200x100 L=300

MVM100x100 L=10

MVM100x100 L=30

3MVM150x100 L=135

MVM150x100 L=15

16MVM200x150 L=1,250

P1-4

P1-2 P1-3

P1-6

2MVM150

L=1,250

L=125

100x150(h) L=135

100x150(h) L=175

200x200(h) L=600

250x200(h) L=725

250x250(h) L=1,060

9 16

18,600

7 8 10 121 3 9

G

B

2 3 5 7

Zh

D

Ye

I

0.000

0.000

-0.030

6 11

A

Zh

K K

B

-0.660

-0.030 -0.030

V

E 0.000

-0.900

-0.930

6, 5, 2, 27,3005,2004,1002,50018,6002,800

2,800 18,600 9,400 2,400

2, 60,500

,2

6, 3, 6, 3,5008,4009,3002,7003,400

Rev. Q-ty Sheet Doc.No. Signature Date

Stage Sheet Sheets

WDDeveloped by

Controlled by

Checked by

Chief designer 05.19Trokhymenko Tostanovska Trokhymenko

05.19 05.19

05.19Berdnyk

“Kredo Bud-Proekt” Ltd

Ventilation

Plan at elev. +0.000 with marking of ventilation systems

In v.

N o.

o f o rig .S ig na tu re a nd d at e In st . o f I nv

. N o.

Plan at elev. +0.000 with ventilation systems marking.

S.p.25

52-18-OB

0.000

-0.030

-0.030

137 138

8701, Breakdown of rooms (end)

Name

Breakdown of rooms (beginning)

Name

Airlock 5.76

Corridor

Staircase 20.72

Corridor

105 Combat training room

107 14.29

108 WC for women

109 Personal hygiene room 4.43

37.27110

111 97.41

113 2.52

7.65

73.06

25.16

Office

25.16

6.76

WC for men

Airlock

Dining hall for 150 seats 156.14

115 19.12Cloakroom

116 17.36Flour shop

71.10Hot shop118

Room for equipment and maintenance accessories 2.39

7.56

Room for dry products storage120

Airlock 3.84

Washroom for kitchen and tableware121 21.96

21.28Meat and fish shop122

Personnel cloakroom124 9.23

WC125 1.08

Shower room126

Dining-facility manager office127

Room for cooks rest128

Personnel WC129

Room for cleaning devices storage130

Loading room131

132 Airlock

Airlock

Boiler room No. 2

Cloakroom for boiler firemen

WC 1.08

Corridor

2.18

8.21

7.77

2.42

3.23

4.08

1.68

1.63

21.58

2.01

33.39

Airlock 3.00

Staircase No. 2 11.60

Combat training room

112 55.97Combat training room

Sleeping room for military personnel

Cabinet for tableware

Cabinet for dinner ware

1.55

Linen press 1.55

1.55

Corridor 1.63

Boiler room No. 1 13.93

Shower room 1.21

24.33Vegetable shop123

Cat.

of room Area, m²

Number of room

Cat.

of room Area, m²

Number of room

136134

870 1, +1200 -1200

50 persons

25 persons

+500 -500

-375 -350

-75

-10015 persons

15 persons 3 persons+300

-300 +300 -300 +60

-60

150 persons

+4500 -4500

+115

2/-

V=35.1 H=2.5

V=52.2 H=2.5

-/5 -45

-50

5/-from cor. 1/1 4/6

3/4

3/4

+230 -310+230

-310

+315 -475

+140 2/2

+90 -90

-/2

-/2

-50

-/2

3, ,4

5, L=175 (Lmax=270); N=73 W n=2,830 rpm h=250 Pa

Fan VENTS VKM 100

L=375 (Lmax=555); N=98 W n=2,705 rpm, h=250 Pa

Fan VENTS VKM 150

L=350 (Lmax=555); N=98 W n=2,705 rpm, h=250 Pa

Fan VENTS VKM 150 pp

Reconstruction of adminstrative building for barracks with administration buildings of combined arms training area of military unit 3070 of National Guard of Ukraine

“International interdepartmental multipurpose training center of subunits”

+675 -155

+625 -105

L=675 (Lmax=950); N=154 W n=2,375 rpm, h=250 Pa

Fan VENTS VKM 200

L=625 (Lmax=950); N=154 W n=2,375 rpm, h=250 Pa

Fan VENTS VKM 200 not <60 % of exh./2-v/zone

-750-750-750

-1,000 -1,000 -1,000 -1,000

-1,200

-750 -750

-1,500

-750 tot. exch.-470

-750 +6,100 -10,170

+4070

L=1,950 (Lmax=2,210); N=233 W n=1,375 rpm, h=350 Pa

Fan VENTS VKM 355B

200x450 Ø200

L=4,250 (Lmax=5,260); N=665 W n=1,265 rpm, h=350 Pa

Fan VENTS VKM 450

L=3,500 (Lmax=5,260); N=665 W n=1,265 rpm, h=350 Pa

Fan VENTS VKM 450

250x600

Ø250

250x650from cor. 1/1

-25

-20

L=750 (Lmax=950); N=154 W n=2,375 rpm, h=250 Pa

Fan VENTS VKM 200

L=1,500 (Lmax=2,210); N=350 W n=1,375 rpm, h=350 Pa

Fan VENTS VKM 355B

L=475 (Lmax=555); N=98 W n=2,705 rpm, h=250 Pa

Fan VENTS VKM 150

150x150

L=310 (Lmax=555); N=98 W n=2,705 rpm, h=250 Pa

Fan VENTS VKM 150

150x150 150x150 200x450

200x200

V1 200x400

L=470 (Lmax=555); N=98 W n=2,705 rpm, h=250 Pa

Fan VENTS VKM 150

L=4,070 (Lmax=5,260); N=665 W n=1,265 rpm, h=350 Pa

Fan VENTS VKM 450

L=4,500 (Lmax=5,260); N=665 W n=1,265 rpm, h=350 Pa

Fan VENTS VKM 450

L=4,500 (Lmax=5,260); N=665 W n=1,265 rpm, h=350 Pa

Fan VENTS VKM 450

L=2,060 (Lmax=2,210); N=350 W n=1,375 rpm, h=350 Pa

Fan VENTS VKM 355B

L=4,905 (Lmax=5,260); N=665 W n=1,265 rpm, h=350 Pa

Fan VENTS VKM 450

L=310 (Lmax=555); N=98 W n=2,705 rpm, h=250 Ðà

Fan VENTS VKM 150

-50

-15

-75+30 -15

150x150

L=1,300 (Lmax=1,460); N=190 W n=2,780 rpm, h=350 Pa

Fan VENTS VKM 315ES

P2 P3 P4 P5

P6

P7

P8

P9

L=1,200 (Lmax=1,460); N=190 W n=2,780 rpm, h=350 Pa

Fan VENTS VKM 315ES

L=1,160+725+115=2,000 (Lmax=2,210); N=233 W n=1,375 rpm, h=350 Pa

Fan VENTS VKM 355B

L=1,200 (Lmax=1,460); N=190 W n=2,780 rpm, h=350 Pa

Fan VENTS VKM 315ES

P10

L=1,160 (Lmax=1,460); N=190 W n=2,780 rpm, h=350 Pa

Fan VENTS VKM 315ES

200x400 200x400250x650VP2

VP3

VP4

VP5

V2 V3

V4

V5

VP6

VP7 VP8

VP9

V6

V7 V8

V9

V10

V11

V12

V12

V13

V14

V15V16

150x150

150x150 150x150

150x150 V2 V3

150x150 V14

V15

V16 150x150

VP10

V4

200x200 V5

V13

V6

V8

V7

18 kW (2x9)

18 kW (2x9)

18 kW (2x9) 18 kW (2x9)

12 kW (2x6)

18kW (2x9) 12kW (2x6)

450x250(h)

400x300(h)

450x250(h)

400x300(h)

VP1

150x150

-25

300x300(h) L=1,300

10MVM200

L=1,300

200x250(h)

3MVM150

L=230

10MVM200

L=1,600

3MVM150

L=230

Air intake grid 600x250(h) P3-1

Air intake grid 500x250(h) P2-1

350x350(h) L=2,060

350x350(h) L=1,600

5MVM150

L=315

MVM150

L=90

150x200(h)

150x200(h)

450x450(h) L=4,905

L=315

150x200(h) L=90

L=405

250x300(h)

5MVM250

L=1,500

5MVM250

L=1,500

5MVM250

L=1,500

450x450(h) L=4,500

12MVM250

L=2,250

12MVM250

L=2,250

400x300(h) L=2,250

450x450(h) L=4,500

Air intake grid 700x350(h) P4-1

Air intake grid 700x350(h) P5-1

5MVM200x150 L=625

5MVM200x150 L=625 Air intake grid

350x250(h) P8-1

Air intake grid 350x250(h) P8-1

MVM150

L=75

300x300(h) L=1,200

150x250(h) L=600

150x250(h) L=600

10MVM200

L=1,200

12MVM250

L=2,070

12MVM250

L=2,000

350x350(h) L=2,000

5MVM200

L=500 350x350(h)

MVM200x100 L=60

100x150(h)

300x300(h) L=1,140

150x150(h)

4MVM200x100 L=300

200x200(h) L=500

6MVM150

L=500

2MVM150

L=…