J061--612A4-26-050 | Install Building 644 Dermatology Generator Site Prep

The Department of Veterans Affairs Veterans Health Administration, Veterans Integrated Service Network 21 seeks site preparation and related improvements for a dermatology generator installation at Building 644, with proposals due June 17, 2026 at 10:00 AM Pacific Daylight Time. A mandatory site visit is scheduled for May 21, 2026 at 9:00 AM at VA Northern California Health Care System (VANCHCS) Mather VAMC, 10535 Hospital Way, Mather, California.

Place of performance is Mather, California. This is commercial and institutional building construction (NAICS 236220) under PSC J061 (Maint/Repair/Rebuild Of Equipment—Electric Wire And Power Distribution Equipment). No set-aside is used.

Scope encompasses generator enclosure site preparation including approximately 7,375 square feet of artificial turf installation, approximately 75 linear feet of permanent stainless-steel handrail installation at 34 inches above walking surface (ADA-compliant), curb ramp construction meeting ADA requirements and Barrier Free Design Standards, concrete demolition and reconstruction (up to 1,000 square feet), utility relocation, asphalt paving, chain link fencing and gates, drainage improvements, and electrical work including as-built drawing submission. The contractor is responsible for utility locating, all temporary power, temporary pedestrian routing, and traffic control plans.

Key requirements include compliance with FAR Clause 52.246-21 (construction warranty), comprehensive quality control and testing laboratory services per federal specifications, Davis-Bacon prevailing wage rates (California wage determination CA20260018, effective January 30, 2026), and adherence to VA-specific occupational health standards including tuberculosis screening within 90 days of assignment. All personnel working on-site longer than 14 days require VA PIV badging. The Site Superintendent and Quality Control roles must remain separate. Standard work hours are 7:00 AM to 4:30 PM Pacific Standard Time, Monday through Friday; non-standard hours require written Contracting Officer approval. Work is subject to OSHA safety requirements, infection control risk assessment compliance for occupied facilities, and construction waste management with minimum 50 percent diversion from landfills. As-built drawings are due within 15 calendar days after project completion.