SOW Attachment 6 - Building 651 Correction.pdf

This file contains photographic documentation and technical specifications related to parking lot accessibility improvements, specifically curb ramp installations.

The images depict concrete parking areas with designated curb ramps featuring tactile warning surfaces, directional signage (STOP signs and "No Right Turn" indicators), and areas marked for demolition (indicated by red highlighting in the first image). The photographs show various angles and stages of curb ramp construction or remediation at what appears to be a Veterans Affairs facility in California, with visible accessibility features including textured warning strips, concrete transitions, and proper slope configurations for wheelchair access.

The technical specification sheet (page 5) presents "Curb Ramp Type B" design standards, detailing accessibility compliance requirements including maximum 2% slope in all directions, 6-foot minimum width, detectable warning surface specifications cast in place, vertical curb transitions, and flush curb specifications. The design includes section details showing ramp slope limitations (5% maximum at the top), vertical curb requirements, and guidance that gutters within the accessible path of travel shall not exceed 5% slope parallel and 2% perpendicular to the path of travel. This documentation appears to support federal accessibility standards, likely ADA compliance for parking facility improvements.