Solicitation Amendment W91RUS27RA0010003 SF 30.pdf
PDF 4 MB Posted
- Solicitation number
- W91RUS27RA001
About this file
This document is a Solicitation Amendment (SF 30) for the Total Engineering and Integration Services (TEIS) IV contract vehicle, modifying the base contract W91RUS27RA0010003. The amendment revises key contract terms including extending the optional ordering period from five years to ten years total, with the optional period now exercised. The Government intends to award up to ten multiple-award, Indefinite Delivery/Indefinite Quantity (IDIQ) contracts with a combined ceiling of $800 million, inclusive of up to four awards reserved for small business concerns. Contract performance will be conducted through Firm Fixed Price (FFP, estimated at 35% of contract value) and Cost-Plus Fixed Fee (CPFF, estimated at 65% of contract value) task orders, with a maximum fixed fee rate to be determined at contract award. The base ordering period is five years ending November 30, 2026, with successful contractors eligible for the optional five-year extension if they meet performance criteria including submitting acceptable task order proposals within the past 36 months, maintaining zero contractor-induced cost overruns, achieving satisfactory CPARS ratings, and meeting small business participation commitments.
The contract provides information systems engineering and information technology support services to the United States Army Information Systems Engineering Command (USAISEC) for all aspects of information and communication systems, including planning, design, development, engineering, implementation, procurement, logistics, evaluation, test, and sustainment. Work is performed worldwide and may include remote, challenging, or hostile locations requiring high-level security clearances. Contract administration is performed by Army Contracting Command Aberdeen Proving Ground (ACC-APG) at Fort Huachuca, Arizona. Payment processing occurs through Wide Area Workflow (WAWF), with invoices submitted by contractors to the Contracting Officer and Contracting Officer's Representative within five working days for review before WAWF entry. The Service Contract Act applies to all contract performance; contractors must propose rates commensurate with applicable geographic locations. Special requirements include compliance with laws and regulations in deployment areas, occupational safety and health standards, security clearance requirements per DD Form 254, and participation in Contractor Performance Assessment Reporting System (CPARS) for performance documentation at both contract and task order levels.
View the file
Other files
Show 40 more
Latest 50 of 115 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.
Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.
If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.
CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER
NUMBER IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
(Signature of person authorized to sign)
15C. DATE SIGNED 16B. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
16C. DATE SIGNED
Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES
2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)
6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE
8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER
9B. DATED (SEE ITEM 11)
10A. MODIFICATION OF CONTRACT/ORDER NUMBER
10B. DATED (SEE ITEM 13)
CODE FACILITY CODE
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
Section A - Solicitation/Contract Form
The following changes have been made:
Miscellaneous text in this section has been modified from:
1. Description of the Item(s)/Service(s) being Procured: The Total Engineering and Integration Services (TEIS) IV program provides for information systems engineering and information technology support services to United States Army Information Systems Engineering Command (USAISEC). The services will include engineering related activities in support of all aspects of information and communication systems.
2. Program Objectives/Needs: TEIS IV support will be required for the full life cycle of USAISEC projects to include planning, design, development, engineering, implementation, procurement, logistics, evaluation, test, sustainment, and ancillary services. Worldwide support is required. The majority of the worldwide support will occur in locations that are secure and have adequate infrastructure; however, worldwide support may also include areas with challenging environments including remote locations, and sometimes hostile locations with little to no infrastructure. Work in highly secure facilities involving the highest-level clearances may be required.
3. Delivery Schedule: To be determined on each Task Order.
4. Type of Contract: The Government intends to make up to ten (10) awards, inclusive of up to four awards reserved for small business concerns, through full and open competition to those Offerors whose proposals represent the best value to the Government. The resulting TEIS IV multiple-award (MA) Indefinite Delivery/Indefinite Quantity (IDIQ) contracts will have a five (5) year option ordering period under which the selected sources will compete for Firm Fixed Price (FFP) and Cost-Plus Fixed Fee (CPFF) contract types. The maximum value of these contracts is $800 million. Orders will be issued in accordance with Federal Acquisition Regulation (FAR) 16.505 Ordering.
5. Format of the Contract: The contract format will consist of FFP, CPFF CLINS/SLINs. Efforts for services which cannot be fixed priced at the time of Task Order award may be performed on a CPFF basis. Services will be performed as specified under awarded task orders. The Government expects FFP to be about 35% of the contract value, and CPFF to be about 65% of the contract value.
W91RUS27RA0010003
6. Proposal Submission: The Offeror's proposal shall be submitted in accordance to section L.
16.1. The Offeror's proposal shall consist of five volumes. The volumes are:
1 - General
2 - Technical Factor
3 - Past Performance Factor
4 - Cost/Price Factor
5 - Small Business Participation Factor
7. Unusual/Specific Aspects of the Acquisition: There are classified aspects of this acquisition. The Contractor(s) selected as a result of this RFP must possess the requisite clearances set forth in the DD Form 254, attached in Section J.
8. Source Selection Methodology: The TEIS IV acquisition will be conducted under Full and Open Competition using the Best Value process as set forth in Section M.
9. Negotiated Procurements: In accordance with FAR 52.215-1, Instructions to Offerors- Competitive Acquisition, the Government intends to evaluate and award contracts resulting from this solicitation without discussions. However, the Government reserves the right to conduct discussions if the Contracting Officer determines them to be necessary.
10. The Government reserves the right to incorporate all or part of an Offeror's proposal into the resultant contract. Portions of an offeror's proposal that are incorporated into the resulting contract shall be deemed to have been drafted by the cognizant Offeror.
11. Offerors will be required, in accordance with Section L, to propose a Small Business Subcontracting Plan, small business participation documentation, and a Small Business Participation Commitment Document to address how they intend to meet small business minimum quantitative requirements and small business subcontracting goals.
12. Offerors shall ensure that any proposed Contractor joint ventures/teaming arrangements are in compliance with the requirements of the FAR, including FAR Subpart 9.6. Offerors are reminded that Contractor joint ventures teaming arrangements must not violate any anti-trust statutes.
13. The Government does not intend to use non-Government advisors (support Contractors) to assist in the evaluation of proposals submitted in response to this solicitation.
14. Disclaimer: This Executive Summary has been prepared as an aid to potential offerors. Every attempt has been made to accurately reflect the requirements/information contained in the solicitation. However, if discrepancies are found between the Executive Summary and the clauses /provisions contained in the solicitation, the clauses/provisions contained in the solicitation shall prevail. Please contact the Contract Specialist identified in Block 10 of the SF33 if any discrepancies are found.
To:
1. Description of the Item(s)/Service(s) being Procured: The Total Engineering and Integration Services (TEIS) IV program provides for information systems engineering and information technology support services to United States Army Information Systems Engineering Command (USAISEC). The services will include engineering related activities in support of all aspects of information and communication systems.
2. Program Objectives/Needs: TEIS IV support will be required for the full life cycle of USAISEC projects to include planning, design, development, engineering, implementation, procurement, logistics, evaluation, test, sustainment, and ancillary services. Worldwide support is required. The majority of the worldwide support will occur in locations that are secure and have adequate infrastructure; however, worldwide support may also include areas with challenging environments including remote locations, and sometimes hostile locations with little to no infrastructure. Work in highly secure facilities involving the highest-level clearances may be required.
3. Delivery Schedule: To be determined on each Task Order.
4. Type of Contract: The Government intends to make up to ten (10) awards, inclusive of up to four awards reserved for small business concerns, through full and open competition to those Offerors whose proposals represent the best value to the Government. The resulting TEIS IV multiple-award (MA) Indefinite Delivery/Indefinite Quantity (IDIQ) contracts will have a five (5) year ordering period under which the selected sources will compete for Firm Fixed Price (FFP) and Cost-Plus Fixed Fee (CPFF) contract types. The maximum value of these contracts is $800 million. Orders will be issued in accordance with Federal Acquisition Regulation (FAR) 16.505 Ordering.
5. Format of the Contract: The contract format will consist of FFP, CPFF CLINS/SLINs. Efforts for services which cannot be fixed priced at the time of Task Order award may be performed on a CPFF basis. Services will be performed as specified under awarded task orders. The Government expects FFP to be about 35% of the contract value, and CPFF to be about 65% of the contract value.
6. Proposal Submission: The Offeror's proposal shall be submitted in accordance to section L-
16.1. The Offeror's proposal shall consist of five volumes. The volumes are:
1 - General
2 - Technical Factor
3 - Past Performance Factor
4 - Cost/Price Factor
5 - Small Business Participation Factor
7. Unusual/Specific Aspects of the Acquisition: There are classified aspects of this acquisition. The Contractor(s) selected as a result of this RFP must possess the requisite clearances set forth in the DD Form 254, attached in Section J.
8. Source Selection Methodology: The TEIS IV acquisition will be conducted under Full and Open Competition using the Best Value process as set forth in Section M.
9. Negotiated Procurements: In accordance with FAR 52.215-1, Instructions to Offerors- Competitive Acquisition, the Government intends to evaluate and award contracts resulting from this solicitation without discussions. However, the Government reserves the right to conduct discussions if the Contracting Officer determines them to be necessary.
10. The Government reserves the right to incorporate all or part of an Offeror's proposal into the resultant contract. Portions of an offeror's proposal that are incorporated into the resulting contract shall be deemed to have been drafted by the cognizant Offeror.
11. Offerors will be required, in accordance with Section L, to propose a Small Business Subcontracting Plan, small business participation documentation, and a Small Business Participation Commitment Document to address how they intend to meet small business minimum quantitative requirements and small business subcontracting goals.
12. Offerors shall ensure that any proposed Contractor joint ventures/teaming arrangements are in compliance with the requirements of the FAR, including FAR Subpart 9.6. Offerors are reminded that Contractor joint ventures teaming arrangements must not violate any anti-trust statutes.
13. The Government does not intend to use non-Government advisors (support Contractors) to assist in the evaluation of proposals submitted in response to this solicitation.
14. Disclaimer: This Executive Summary has been prepared as an aid to potential offerors. Every attempt has been made to accurately reflect the requirements/information contained in the solicitation. However, if discrepancies are found between the Executive Summary and the clauses /provisions contained in the solicitation, the clauses/provisions contained in the solicitation shall prevail. Please contact the Contract Specialist identified in Block 10 of the SF33 if any discrepancies are found.
15. This IDIQ is subject to FAR procedures.
Section B - Supplies or Services & Prices or Costs
The following CLIN(s) / SLIN(s) / ELIN(s) were modified:
INFORMATION FROM TO
Description OPTIONAL ORDERING PERIOD-
FFP SERVICES
This CLIN is established to provide Cost Reimbursement Services for the ordering period in accordance with the PWS, set forth at Section J, Attachment 0001.
The ordering period is sixty (60) months, commencing at contract award. This contract is covered by the Service Contract Act. However, contract performance may be at any number of locations not yet identified.
Contractors are required to propose rates commensurate with the Service Contract Act for the appropriate performance location(s).
Specific requirements and pricing will be set forth in each task order.
The maximum allowable fixed fee is XX percent. This percentage is subject to downward negotiation only at the task order level.
Inspection, Acceptance and FOB Point shall be specified by incorporating the appropriate clauses from Sections E and F on each individual task order.
OPTIONAL ORDERING PERIOD-
FFP SERVICES
This CLIN is established to provide Firm Fixed Price Services for the ordering period in accordance with the PWS, set forth at Section J, Attachment 0001.
The ordering period is sixty (60) months, commencing at contract award. This contract is covered by the Service Contract Act. However, contract performance may be at any number of locations not yet identified.
Contractors are required to propose rates commensurate with the Service Contract Act for the appropriate performance location(s).
Specific requirements and pricing will be set forth in each task order.
The maximum allowable fixed fee is XX percent. This percentage is subject to downward negotiation only at the task order level.
Inspection, Acceptance and FOB Point shall be specified by incorporating the appropriate clauses from Sections E and F on each individual task order.
Section F - Deliveries or Performance
Miscellaneous text in this section has been modified from:
SECTION F - DELIVERIES OR PERFORMANCE
This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.
Also, the full text of a clause may be accessed electronically at these addresses:
For FAR clauses: https://www.acquisition.gov/
For DFARS clauses: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
If the clause requires additional or unique information, then that information is provided immediately after the clause title.
F-1 52.242-15 STOP-WORK ORDER (AUG 1989) - ALTERNATE I (APR 1984) APR/1984
F-2 52.242-17 GOVERNMENT DELAY OF WORK APR/1984
F-3 52.247-34 F.O.B. DESTINATION NOV/1991
F-4 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION JAN/2023
(a) Definitions. As used in this clause--
"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.
"Concatenated unique item identifier" means
(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or
(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.
"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and
W91RUS27RA0010003
https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.
"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.
"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html
"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number.
For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.
"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.
"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.
"Governments unit acquisition cost" means
(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;
(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the Government at the time of delivery; and
(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.
"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at h ttp://www.aimglobal.org/?Reg_Authority15459
"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.
"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.
"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.
"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.
"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.
"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.
"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.
"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.
"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.
"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.
"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.
"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.
"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at h ttp://www.acq.osd.mil/dpap/pdi/uid/uii_types.html
(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.
(c) Unique item identifier.
(1) The Contractor shall provide a unique item identifier for the following:
(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:
Contract Line, Subline, or
Exhibit Line Item Number
TO BE DETERMNIED AT THE TASK ORDER LEVEL
Item Description
(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:
Contract Line, Subline, or
Exhibit Line Item Number
TO BE DETERMINED AT THE TASK ORDER LEVEL
(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed repairables and DoD serially managed nonrepairables as specified in Attachment Number -5-.
(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number -6-.
(v) Any item not included in paragraphs (c) (1) (i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.
(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.
(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.
(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--
(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:
(A) Application Identifiers (Ais) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.
(B) Data Identifiers (Dis) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.
(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and
(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.
(5) Unique item identifier.
(i) The Contractor shall--
(A) Determine whether to--
(1) Serialize within the enterprise identifier;
(2) Serialize within the part, lot, or batch number; or
(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and
(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c) (1) of this clause, based on the criteria provided in MIL-STD- 130, Identification Marking of U.S. Military Property, latest version;
(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and
(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.
(ii) The issuing agency code--
(A) Shall not be placed on the item; and
(B) Shall be derived from the data qualifier for the enterprise identifier.
(d) For each item that requires item unique identification under paragraph (c) (1) (i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c) (1) (v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:
(1) Unique item identifier.
(2) Unique item identifier type.
(3) Issuing agency code (if concatenated unique item identifier is used).
(4) Enterprise identifier (if concatenated unique item identifier is used).
(5) Original part number (if there is serialization within the original part number).
(6) Lot or batch number (if there is serialization within the lot or batch number).
(7) Current part number (optional and only if not the same as the original part number).
(8) Current part number effective date (optional and only if current part number is used).
(9) Serial number (if concatenated unique item identifier is used).
(10) Governments unit acquisition cost.
(11) Unit of measure.
(12) Type designation of the item as specified in the contract schedule, if any.
(13) Whether the item is an item of Special Tooling or Special Test Equipment.
(14) Whether the item is covered by a warranty.
(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c) (1) (iii) of this clause or when item unique identification is provided under paragraph (c) (1) (v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:
(1) Unique item identifier of the parent item under paragraph (c) (1) of this clause that contains the embedded subassembly, component, or part.
(2) Unique item identifier of the embedded subassembly, component, or part.
(3) Unique item identifier type.**
(4) Issuing agency code (if concatenated unique item identifier is used).**
(5) Enterprise identifier (if concatenated unique item identifier is used).**
(6) Original part number (if there is serialization within the original part number).**
(7) Lot or batch number (if there is serialization within the lot or batch number).**
(8) Current part number (optional and only if not the same as the original part number).**
(9) Current part number effective date (optional and only if current part number is used).**
(10) Serial number (if concatenated unique item identifier is used).**
(11) Description.
** Once per item.
(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:
(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/
(2) Embedded items shall be reported by one of the following methods--
(i) Use of the embedded items capability in WAWF;
(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/ ; or
(iii) Via WAWF as a deliverable attachment for exhibit line item number -7-, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.
(g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c) (1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.
F-7 Place of Performance
The place(s) of performance for task orders will be determined for each task order based on the task order requirements and may include Government sites and/or contractor sites. The place of performance may be CONUS, OCONUS, or a combination of CONUS and OCONUS locations to support requirements throughout the world. The task order RFP shall identify the place(s) of performance for the task order.
F-8 Period of Performance
1. The base ordering period for the TEIS IV multiple award IDIQ vehicle is five (5) years (ending 30 November 2026), with one five (5) year optional ordering period that may extend the cumulative ordering period of the contract to ten (10) years in accordance with FAR 52.217-9, Option to Extend the Term of the Contract, if exercised.
2. The Government may exercise the option for those Contractors that have demonstrated successful performance on the contract and task orders. Successful performance is defined as meeting all of the following minimum requirements:
A. The Contractor has submitted at least one acceptable proposal for a task order during the past 36 months of the base ordering period;
B. The Contractor has had no Contractor-induced cost overruns;
C. The Contractor has received no Unsatisfactory ratings in CPARS for the TEIS IV contract or task orders under the contract;
D. The Contractor has met small business participation commitments, as proposed, in Section J, Attachment ATT0065 and their reporting requirements in CDRL A003.
3. The Government may not exercise the option for those Contractors who do not meet the requirements outlined in paragraph F.8.2 above.
4. Contractors may be required to continue services under a task order for up to one year after the expiration of the ordering period in accordance with FAR 17.204(d).
5. The period of performance for task orders will be determined for each task order based on the task order requirements. The TOPR shall identify the period of performance for the task order.
To:
SECTION F - DELIVERIES OR PERFORMANCE
This document incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.
Also, the full text of a clause may be accessed electronically at these addresses:
For FAR clauses: https://www.acquisition.gov/
For DFARS clauses: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
If the clause requires additional or unique information, then that information is provided immediately after the clause title.
F-1 52.242-15 STOP-WORK ORDER (AUG 1989) - ALTERNATE I (APR 1984) APR/1984
F-2 52.242-17 GOVERNMENT DELAY OF WORK APR/1984
F-3 52.247-34 F.O.B. DESTINATION NOV/1991
F-4 252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION JAN/2023
(a) Definitions. As used in this clause--
"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.
"Concatenated unique item identifier" means
(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or
(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.
"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and
W91RUS27RA0010003
https://www.acq.osd.mil/dpap/dars/dfarspgi/current/index.html
Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.
"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.
"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html
"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number.
For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.
"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.
"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.
"Governments unit acquisition cost" means
(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;
(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractors estimated fully burdened unit cost to the Government at the time of delivery; and
(3) For items produced under a time-and-materials contract, the Contractors estimated fully burdened unit cost to the Government at the time of delivery.
"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at h ttp://www.aimglobal.org/?Reg_Authority15459
"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.
"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.
"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.
"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.
"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.
"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.
"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.
"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.
"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.
"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.
"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.
"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.
"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at h ttp://www.acq.osd.mil/dpap/pdi/uid/uii_types.html
(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.
(c) Unique item identifier.
(1) The Contractor shall provide a unique item identifier for the following:
(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:
Contract Line, Subline, or
Exhibit Line Item Number
TO BE DETERMNIED AT THE TASK ORDER LEVEL
Item Description
(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:
Contract Line, Subline, or
Exhibit Line Item Number
TO BE DETERMINED AT THE TASK ORDER LEVEL
(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed repairables and DoD serially managed nonrepairables as specified in Attachment Number -5-.
(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number -6-.
(v) Any item not included in paragraphs (c) (1) (i), (ii), (iii), or (iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.
(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.
(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.
(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--
(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:
(A) Application Identifiers (Ais) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.
(B) Data Identifiers (Dis) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.
(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and
(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.
(5) Unique item identifier.
(i) The Contractor shall--
(A) Determine whether to--
(1) Serialize within the enterprise identifier;
(2) Serialize within the part, lot, or batch number; or
(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and
(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c) (1) of this clause, based on the criteria provided in MIL-STD- 130, Identification Marking of U.S. Military Property, latest version;
(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and
(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.
(ii) The issuing agency code--
(A) Shall not be placed on the item; and
(B) Shall be derived from the data qualifier for the enterprise identifier.
(d) For each item that requires item unique identification under paragraph (c) (1) (i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c) (1) (v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:
(1) Unique item identifier.
(2) Unique item identifier type.
(3) Issuing agency code (if concatenated unique item identifier is used).
(4) Enterprise identifier (if concatenated unique item identifier is used).
(5) Original part number (if there is serialization within the original part number).
(6) Lot or batch number (if there is serialization within the lot or batch number).
(7) Current part number (optional and only if not the same as the original part number).
(8) Current part number effective date (optional and only if current part number is used).
(9) Serial number (if concatenated unique item identifier is used).
(10) Governments unit acquisition cost.
(11) Unit of measure.
(12) Type designation of the item as specified in the contract schedule, if any.
(13) Whether the item is an item of Special Tooling or Special Test Equipment.
(14) Whether the item is covered by a warranty.
(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c) (1) (iii) of this clause or when item unique identification is provided under paragraph (c) (1) (v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:
(1) Unique item identifier of the parent item under paragraph (c) (1) of this clause that contains the embedded subassembly, component, or part.
(2) Unique item identifier of the embedded subassembly, component, or part.
(3) Unique item identifier type.**
(4) Issuing agency code (if concatenated unique item identifier is used).**
(5) Enterprise identifier (if concatenated unique item identifier is used).**
(6) Original part number (if there is serialization within the original part number).**
(7) Lot or batch number (if there is serialization within the lot or batch number).**
(8) Current part number (optional and only if not the same as the original part number).**
(9) Current part number effective date (optional and only if current part number is used).**
(10) Serial number (if concatenated unique item identifier is used).**
(11) Description.
** Once per item.
(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:
(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/
(2) Embedded items shall be reported by one of the following methods--
(i) Use of the embedded items capability in WAWF;
(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/ ; or
(iii) Via WAWF as a deliverable attachment for exhibit line item number -7-, Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.
(g) Subcontracts. If the Contractor acquires by contract any items for which item unique identification is required in accordance with paragraph (c) (1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items.
F-7 Place of Performance
The place(s) of performance for task orders will be determined for each task order based on the task order requirements and may include Government sites and/or contractor sites. The place of performance may be CONUS, OCONUS, or a combination of CONUS and OCONUS locations to support requirements throughout the world. The task order RFP shall identify the place(s) of performance for the task order.
F-8 Period of Performance
1. The base ordering period for the TEIS IV multiple award IDIQ vehicle is five (5) years (ending 30 November 2026), with one five (5) year optional ordering period that may extend the cumulative ordering period of the contract to ten (10) years in accordance with FAR 52.217-9, Option to Extend the Term of the Contract. The optional ordering period was exercised. The addition of FAR 52.217-8, Option to Extend Services, will be evaluated as part of the TEIS IV on-ramping process
2. The Government may exercise the option for those Contractors that have demonstrated successful performance on the contract and task orders. Successful performance is defined as meeting all of the following minimum requirements:
A. The Contractor has submitted at least one acceptable proposal for a task order during the past 36 months of the base ordering period;
B. The Contractor has had no Contractor-induced cost overruns;
C. The Contractor has received no Unsatisfactory ratings in CPARS for the TEIS IV contract or task orders under the contract;
D. The Contractor has met small business participation commitments, as proposed, in Section J, Attachment ATT0065 and their reporting requirements in CDRL A003.
3. The Government may not exercise the option for those Contractors who do not meet the requirements outlined in paragraph F.8.2 above.
4. Contractors may be required to continue services under a task order for up to one year after the expiration of the ordering period in accordance with FAR 17.204(d).
5. The period of performance for task orders will be determined for each task order based on the task order requirements. The TOPR shall identify the period of performance for the task order.
Section G - Contract Administration Data
Miscellaneous text in this section has been modified from:
SECTION G - CONTRACT ADMINISTRATION DATA
G-1 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS JAN/2023
(a) Definitions. As used in this clause--
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .