08111.DOC

SECTION 08111

PART 1

GENERAL

1.1 Scope: Provide all labor and material for a complete installation at locations shown on the drawings and/or as described in the door schedule.

1.2 Submittals: Submit product information for approval prior to fabrication. Submit shop drawings of each frame type.

1.3 Related Sections:

08710 Door Hardware

08800 Glass and Glazing

PART 2

PRODUCTS

2.1 Hollow Metal Doors: Size as shown on drawings, as manufactured by Ceco, Curries, Republic or Steelcraft. Doors shall be 16 gauge with 3/16" reinforcing for lock and hinges. Doors shall be 1-3/4" thick. Top and bottom of door shall be flush. No seams on face of door. No manufacturer's putty of any type shall be used in the finish and assembly of metal doors. Doors shall have one factory coat of rust inhibitive primer.

2.2 Pressed Steel Frames: Size as shown on drawings, as manufactured by Ceco, Curries, Republic or Steelcraft. Frames shall be 16 gauge pressed steel, prefabricated. Mortar boxes shall be required on frames for all door hardware. Hardware cutouts in frames shall be done by the fabricator. Machine in their shop. No field cutting for hardware will be permitted. No manufacturer's putty of any type shall be used in fabrication. All welding of frames shall be ground smooth. Frames shall be given one coat of rust inhibitive primer at the factory. Reinforce frames for all finish hardware, hinges, and closers.

PART 3

EXECUTION

3.1 Install in accordance with manufacturer's recommendations. Field verify all conditions. Anchor frames with four anchors each side.

END OF SECTION

08111 - 1 H:\8348\8348003.23\Docs\B-3 Specs\Division 8\08111.DOC November 1, 2005