08_Electrical.pdf

VFD

M

M

S

RACEWAY SYMBOLS

SURFACE MOUNTED CONDUIT

JUNCTION BOX - CEILING MOUNTED

CONCEALED CONDUIT IN CEILING OR WALL

WIREWAY, SIZE AND TYPE

AS INDICATED ON DRAWINGS

CABLE TRAY, SIZE AND TYPE

AS INDICATED ON DRAWINGS

JUNCTION BOX - WALL MOUNTED

J

J

RECEPTACLE SYMBOLS

DUPLEX RECEPTACLE TEXT INDICATES MOUNTING HEIGHT

CEILING MOUNTED DOUBLE DUPLEX RECEPTACLE

SIMPLEX RECEPTACLE

DOUBLE DUPLEX RECEPTACLE

SPECIAL PURPOSE CONNECTION, SEE EQUIPMENT

WIRING SCHEDULE

CEILING MOUNTED DUPLEX RECEPTACLE

ABOVE COUNTER DUPLEX RECEPTACLE

C

F FLOOR BOX

C

60"

RECEPTACLE NOTATIONS:

DENOTES WEATHER PROOF OUTLETSWP

DENOTES GROUND FAULT INTERRUPTER OUTLETSGFCI

DENOTES ELECTRIC WATER COOLER OUTLETSEWC

SERVICE & DISTRIBUTION SYMBOLS

NEW PANELBOARD

EQUIPMENT GROUND BUSEGB

EXISTING PANELBOARD

MOTOR & EQUIPMENT CONNECTION

SYMBOLS

1 PHASE MOTOR CONNECTION

EQUIPMENT CONNECTION

3 PHASE MOTOR CONNECTION

COMBINATION MAGNETIC MOTOR CONTROLLER

MANUAL MOTOR CONTROLLER (3 PHASE)

VARIABLE FREQUENCY MOTOR CONTROLLER

MAGNETIC MOTOR CONTROLLER

NON-FUSED DISCONNECT SWITCH

FUSED DISCONNECT SWITCH

DOUBLE THROW SWITCH

MOTOR RATED SWITCH

MOTOR RATED STARTER WITH OVERLOADS

GENERAL SYMBOLS

KEYED NOTE, USED TO DESCRIBE ADDITIONAL

INFORMATION OF WORK REQUIRED, SPECIFIC TO

THE SHEET AND/OR DETAIL IT IS SHOWN WITH.

DETAIL NUMBER / SHEET NUMBER#/E-###

9.###

LINE TYPE KEY

EXISTING TO BE REMOVED BY THIS

CONTRACTOR (DARK DASHED LINE)

EXISTING TO REMAIN WORK

(THIN SOLID LINE)

NEW WORK BY THIS CONTRACTOR

(DARK SOLID LINE)

ONE-LINE EQUIPMENT ENCLOSURE

PANEL DIVISION LINES

SITE UNDERGROUND ELECTRICE

SWITCHES, FOR MULTI-LEVEL SWITCHING. REFER TO FLOOR

PLANS AND FIXTURE SCHEDULE FOR EXACT CONTROL

INTENT.

SINGLE POLE SWITCH

LUMINAIRE CONTROL SYMBOLS

OCCUPANCY SENSOR CEILING MOUNT

(X REPRESENTS SCHEDULE DESIGNATION)

DAYLIGHT SENSOR , SEE OCCUPANCY SENSOR SCHEDULE

LUMINAIRE SYMBOLS

RECESSED LUMINAIRE

RECESSED TROFFER

RECESSED LINEAR

WALL MOUNTED EXIT SIGN

CEILING MOUNTED EXIT SIGN

PENDANT ROUND LUMINAIRE

OS X

DS

ARROW DENOTES EXIT SIGN CHEVRON

EMERGENCY BATTERY UNIT

SWITCH NOTATIONS:

3 DENOTES 3-WAY SWITCH

4 DENOTES 4-WAY SWITCH

D DENOTES WALL BOX DIMMER SWITCH

T DENOTES TIMER SWITCH

OSX DENOTES OCCUPANCY SENSOR

(X REPRESENTS SCHEDULE DESIGNATION)

B DENOTES MOMENTARY CONTACT BUTTON FOR BLUE

LIGHT SYSTEM

EMERGENCY SHADING MODIFIER

PENDANT INDUSTRIAL

WALL BRACKET

A1 1Ra

LUMINAIRE TYPE

LUMINAIRE CIRCUITRY & CONTROL KEY:

LOWER CASE LETTER INDICATES SWITCHLEG CONTROL

"R" INDICATES LIGHTING CONTROL PANEL

REFER TO LIGHTING CONTROL PANEL SCHEDULE

NUMBER INDICATES BRANCH PANEL CIRCUIT NUMBER

SURFACE COVE STRIP

SITE SYMBOLS

TRANS

ELECTRIC TRANSFORMER

DEMOLITION GENERAL NOTES:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

THE INFORMATION SHOWN IS BASED ON EXISTING

DRAWINGS AND SITE OBSERVATIONS TO ASSIST

CONTRACTOR IN BIDDING. THE ELECTRICAL DRAWINGS

INDICATE EXISTING ELECTRICAL ITEMS TO BE REMOVED.

THE DRAWINGS ARE INTENDED TO INDICATE THE SCOPE

OF WORK REQUIRED AND DO NOT INDICATE EVERY BOX,

CONDUIT, OR WIRE THAT MUST BE REMOVED. THE

CONTRACTOR SHALL VISIT THE SITE PRIOR TO

SUBMITTING A BID AND VERIFY EXISTING CONDITIONS.

REFER TO SPECIFICATION SECTION 26 05 02 FOR

ADDITIONAL REQUIREMENTS.

DASHED WALLS ON THE FLOOR PLANS INDICATE EXISTING

WALLS BEING DEMOLISHED. DO NOT RELY ON

ELECTRICAL DRAWINGS TO DETERMINE EXTENT OF

GENERAL CONSTRUCTION DEMOLITION. REFER TO THE

ARCHITECTURAL DEMOLITION PLANS FOR THE EXACT

EXTENT OF WORK REQUIRED BY THIS PROJECT. REMOVE

ALL DEVICES ON DASHED WALLS NOT SHOWN ON THE

CONTRACT DRAWINGS. REFER TO DEMOLITION

DRAWINGS OF OTHER TRADES. WHERE MOTORS,

CONTROL PANELS, AND OTHER LOADS OR APPARATUS

THAT HAVE ELECTRICAL CONNECTIONS ARE BEING

REMOVED, INCLUDE DISCONNECTION AND REMOVAL OF

ALL ASSOCIATED CONDUIT, WIRING, ETC.

ELECTRICAL ITEMS (i.e., LIGHTING FIXTURES, PANELBOARDS, DISCONNECTS, MOTOR CONTROLLERS , ETC.) REMOVED AND NOT RELOCATED REMAIN THE

PROPERTY OF THE OWNER AND SHALL BE TURNED OVER

TO THE OWNER, IN A STORAGE AREA TO BE DESIGNATED

BY THE OWNER. EQUIPMENT BEING REMOVED SHALL BE

HANDLED SO AS NOT TO FURTHER REDUCE ITS VALUE TO

THE OWNER. THE CONTRACTOR SHALL DISPOSE OF

MATERIAL THE OWNER DOES NOT WANT TO REUSE OR

RETAIN FOR MAINTENANCE PURPOSES.

WHERE LIGHTS, SWITCHES, RECEPTACLES, ETC., ARE

BEING REMOVED ALL ASSOCIATED CONDUIT AND WIRE

BACK TO THE PANELBOARD OR FEEDER JUNCTION BOX

SERVING THE DEVICE SHALL ALSO BE REMOVED, UNLESS

THE CONDUIT CAN BE REUSED FOR NEW CONDUCTORS.

THE CONTRACTOR SHALL DISPOSE OF MATERIAL THE

OWNER DOES NOT WANT TO REUSE OR RETAIN FOR

MAINTENANCE PURPOSES.

ALL BOXES THAT REMAIN IN PLACE IN EXISTING MASONRY

WALLS THAT ARE TO REMAIN SHALL BE PROVIDED WITH A

BLANK COVERPLATE. REFER TO SPECIFICATIONS FOR

ADDITIONAL REQUIREMENTS ASSOCIATED WITH TYPE AND

ATTACHMENT.

ALL CONDUIT SHALL BE REMOVED WHERE WALLS ARE

BEING REMOVED. WHERE CONDUIT IS IN THE CONCRETE

SLAB, CUT OFF FLUSH, PULL OUT WIRE, AND PLUG.

WHERE CONDUIT IS RUN EXPOSED, ALL ASSOCIATED

CLAMPS, SUPPORTS, HANGERS, ETC., SHALL ALSO BE

REMOVED. CONDUIT CONCEALED IN WALL

CONSTRUCTION MAY BE ABANDONED IN PLACE IF NOT

AFFECTED BY OTHER CONSTRUCTION.

THIS CONTRACTOR SHALL COORDINATE ALL HIS WORK,

INCLUDING PHASING WITH OTHER CONTRACTORS AT THE

JOB SITE BEFORE REMOVING EXISTING ELECTRICAL AND

INSTALLING NEW ITEMS.

EXISTING CONDUIT IN GOOD CONDITION, MAY BE REUSED

IN PLACE. RELOCATED EXISTING CONDUIT SHALL NOT BE

ALLOWED. BONDING CONDUCTORS SHALL BE INSTALLED

IN ALL REUSED CONDUIT TO ASSURE PROPER GROUND

PATH.

MAINTAIN CIRCUIT CONTINUITY OF DEVICES LOCATED

OUTSIDE OF CONSTRUCTION AREA. DEVICE AND

EQUIPMENT REMOVAL IN CERTAIN LOCATIONS MAY

REQUIRE THE INSTALLATION OF A JUNCTION BOX TO

RECONNECT CIRCUITS THAT REMAIN IN OPERATION.

EXTEND CONDUIT AND WIRING AS REQUIRED TO MAINTAIN

POWER TO REMAINING EQUIPMENT.

BALLASTS MANUFACTURED PRIOR TO 1980 CONTAIN PCBs

AND SHALL BE DISPOSED OF IN ACCORDANCE WITH

SPECIFICATIONS.

HID AND FLUORESCENT LAMPS CONTAIN MERCURY AND

SHALL BE DISPOSED OF IN ACCORDANCE WITH

SPECIFICATIONS.

CONTRACTOR SHALL REMOVE AND INSTALL ALL CEILING

TILES AS REQUIRED FOR THE EXECUTION OF ELECTRICAL

WORK THAT IS OUTSIDE THE CONTRACT LIMITS OF

CONSTRUCTION. CONTRACTOR SHALL REPLACE CEILING

TILES WITH IDENTICAL MATERIAL WHERE DAMAGED BY

THIS CONTRACTOR.

PROVIDE REVISED TYPED CIRCUIT DIRECTORY IN

PANELBOARDS THAT HAVE CIRCUITS REMOVED OR

ADDED CIRCUITS.

REMOVE EXPOSED ABANDONED CONDUIT, INCLUDING

ABANDONED CONDUIT ABOVE ACCESSIBLE CEILING

FINISHES. CUT RACEWAY FLUSH WITH WALLS AND

FLOORS, PATCH SURFACES TO MATCH EXISTING. REMOVE

ALL ASSOCIATED CLAMPS, HANGERS, SUPPORTS, ETC.

ASSOCIATED WITH RACEWAY REMOVAL.

DISCONNECT AND REMOVE ABANDONED LUMINAIRES,

INCLUDING BRACKETS, STEMS, HANGERS, AND OTHER

ACCESSORIES.

DISCONNECT AND REMOVED ELECTRICAL DEVICES AND

EQUIPMENT SERVING UTILIZATION EQUIPMENT THAT HAS

BEEN REMOVED.

ALL ELECTRICAL CONNECTIONS FOR MECHANICAL

DEVICES AND/OR EQUIPMENT SHALL BE DEMOLISHED

UNLESS NOTED OTHERWISE. CONNECTIONS ARE NOT

SHOWN ON PLAN. COORDINATE DEMOLITION WITH

MECHANICAL DEMOLITION CONTRACTOR.

GENERAL NOTES:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

SEE SHEET E-001 FOR SYMBOLS AND ABBREVIATIONS.

SEE SHEET E-601 FOR LIGHT FIXTURE SCHEDULE.

SEE SHEET E-602 FOR EQUIPMENT CONNECTION

SCHEDULE.

SEE SHEETS E-603 FOR PANEL SCHEDULES.

SEE SHEET E-701 DRAWING FOR ONE LINE POWER

DISTRIBUTION DIAGRAMS.

ELECTRICAL DEVICES SHOWN AS THIN LINE TYPE ARE

EXISTING TO REMAIN AND SHALL BE RE-FED AS

INDICATED.

ALL EMEGENCY LIGHTING (SHOWN SHADED) SHALL BE

FED FROM INVERTER 'INV' UNLESS NOTED OTHERWISE.

ALL EXIT LIGHTS ON THIS PROJECT SHALL BE WIRED TO

CIRCUIT INV-1 UNLESS NOTED OTHERWISE.

ALL EMERGENCY LIGHTING SHALL BE #10AWG OR

LARGER.

ALL EMERGENCY UNIT EQUIPMENT OR EBU'S SHALL BE ON

THE SAME BRANCH CIRCUIT AS THAT SERVING THE

NORMAL OR EMERGENCY LIGHTING IN THE AREA

CONNECTED AHEAD OF ANY LOCAL SWITCHES OR

CONTROLS, PER NEC. 700.12(F).

ALL CEILING MOUNTED OCCUPANCY SENSORS SHALL BE

WIRED IN SERIES WITH ROOM LIGHT SWITCHES.

EC SHALL ALLOW TIME AND EFFORT FOR ALL OCCUPANCY

SENSOR FINE TUNING AND CALIBRATION.

COORDINATE LOCATION OF CEILING MOUNTED

OCCUPANCY SENSORS WITH HVAC CEILING DIFFUSERS.

DO NO INSTALL SENSOR WITHIN 3'-0" OF DIFFUSER.

ALL CEILING AND CORNER MOUNTED OCCUPANCY

SENSORS SHALL HAVE AN AUXILIARY NORMALLY OPEN

CONTACT TO TIE INTO THE BUILDING AUTOMATION

SYSTEM FOR INDICATION OF THE SPACE BEING OCCUPIED

OR UNOCCUPIED. THE CONTACT SHOULD FAIL CLOSED

FOR OCCUPIED MODE. IF MULTIPLE OCCUPANCY

SENSORS ARE USED FOR A SINGLE HVAC ZONE, THEY

SHALL BE DAISY CHAINED FOR A SINGLE ZONE BY THE

CONTROL CONTACTOR. THIS WORK SHALL BE

COORDINATED WITH HVAC CONTRACTOR IN FIELD.

COORDINATE EXACT LOCATIONS OF LIGHT FIXTURES

WITH ARCHITECTURAL REFLECTED CEILING PLANS.

COORDINATE LIGHT FIXTURE INSTALLATION WITH

DUCTWORK AND PIPING OF OTHER TRADES.

CONTRACTOR TO NOTIFY A/E IF CONFLICT EXISTS.

IN MECHANICAL ROOMS, COORDINATE EXACT PLACEMENT

OF LIGHT FIXTURES WITH DUCTWORK AND PIPING OF

OTHER TRADES. LOCATIONS SHOWN ON THIS PLAN ARE

BASED ON THE CURRENT DESIGN AND MAY REQUIRE

ADJUSTMENT DURING CONSTRUCTION. EC IS

RESPONSIBLE FOR COORDINATION EFFORT WITH OTHER

TRADES TO AVOID ANY AND ALL CONFLICTS.

ELECTRICAL CONTRACTOR SHALL REFER TO T-SERIES

SET OF DOCUMENTS INCLUDED IN THIS BID PACKAGE FOR

ALL LOW-VOLTAGE WORK ASSOCIATED WITH THIS

PROJECT. EC SHALL INCLUDE IN THIS BID ALL LABOR AND

MATERIALS REQUIRED FOR THE COMPLETE BOX AND

RACEWAY SYSTEMS FOR BOTH ACTIVE AND FUTURE

CABLES. ALL CABLE TRAYS, CONDUITS, BOXES AND

OUTLETS REQUIRED FOR LOW-VOLTAGE SYSTEM

INSTALLATION SHALL BE COORDINATED WITH T-SERIES

BID DOCUMENTS AND VERIFIED IN FIELD WITH SPECIFIC

LOW-VOLTAGE CONTRACTOR PRIOR TO ROUGH-IN.

SCIF GENERAL NOTES:

1. THE VAULT AREA IS CONSIDERED A SENSITIVE COMPARTMENTED

INFORMATION FACILITY. ALL NEW CONSTRUCTION AND RENOVATION TO THE

AREA INCLUDING WALL CONSTRUCTION, FIRE PROTECTION/DETECTION,

MECHANICAL/HVAC, ELECTRICAL, AND TECHNOLOGY SYSTEMS MUST

COMPLY WITH THE REQUIREMENTS PROVIDED IN UNIFIED FACILITY CRITERIA

4-010-05 SENSITIVE COMPARTMENTED INFORMATION FACILITY PLANNING,

DESIGN, AND CONSTRUCTION WITH CHANGE 1, 1 OCTOBER 2013, AND

REFERENCED IC TECH SPEC FOR ICD/ICS 705 TECHNICAL SPECIFICATIONS

FOR CONSTRUCTION AND MANAGEMENT OF SENSITIVE COMPARTMENTED

INFORMATION FACILITIES, VERSION 1.2, DATED 23 APRIL 2012.

2. CONSTRUCTION, GENERAL: UFC 4-010-05 REQUIREMENTS HAVE BEEN

INCORPORATED INTO THE DESIGN DRAWINGS AND SPECIFICATIONS.

CHANGES TO THE SCOPE OF WORK PROVIDED IN THE CONTRACT

DOCUMENTS MAY INVALIDATE THE APPROVALS RECEIVED FOR THIS

CONSTRUCTION, AND COULD RESULT IN THE REMOVAL AND

RECONSTRUCTION OF FINISHED WORK. ANY PROPOSED DEVIATIONS FROM

THE CONTRACT DOCUMENTS MUST BE FULLY REVIEWED AND APPROVED BY

THE COR PRIOR TO IMPLEMENTATION.

3. ALL CONSTRUCTION MUST BE DONE IN SUCH A MANNER AS TO PROVIDE

VISUAL EVIDENCE OF UNAUTHORIZED PENETRATION. CONSTRUCTION MUST

BE COMPLETED IN A MANNER TO PROVIDE THE REQUIRED STC RATINGS FOR

SOUND CONTROL AT THE WALLS IDENTIFIED. THROUGH-WALL

PENETRATIONS OF PIPE, CONDUIT, AND DUCTWORK REQUIRE SPECIAL

CONSTRUCTION AND INSPECTION PROVISIONS WHICH HAVE BEEN

INCORPORATED INTO THE CONTRACT DOCUMENTS.

4. THE CONTRACTOR SHALL SUBMIT A LIST OF ALL MATERIALS USED IN THE

CONSTRUCTION OF THE VAULT AREA, INCLUDING DIMENSIONAL EXTENTS OF

THE USE AND LOCATION(S) WHERE USED IN THE VAULT. THIS LIST SHALL BE

KEPT UP TO DATE DURING THE COURSE OF CONSTRUCTION AND SUBMITTED

TO THE COR AS PART OF THE CLOSE-OUT REQUIREMENTS AT THE END OF

CONSTRUCTION.

5. PHOTOGRAPHY REQUIREMENTS: THE CONTRACTOR IS NOT ALLOWED TO

HAVE PHOTOGRAPHIC OR RECORDING DEVICES IN THE VAULT AREA. 115 FW

CCZ PERSONNEL WILL BE TAKING PICTURES OF ON-GOING CONSTRUCTION

IN ORDER TO DOCUMENT THAT ALL SECURITY MEASURES ARE BEING MET.

THE COR SHALL BE NOTIFIED AT LEAST ONE WORKING DAY PRIOR TO KEY

CONSTRUCTION MILESTONES. KEY CONSTRUCTION MILESTONES INCLUDE

BUT ARE NOT LIMITED TO: WALL CONSTRUCTION, INCLUDING EACH OF

MULTIPLE LAYERS OF GYPSUM BOARD, FINISHING OF PENETRATIONS,

NON-CONDUCTIVE BREAKS OF PENETRATIONS, AND SOUND BATT

INSULATION INSTALLATIONS.

Mead & Hunt, Inc.

2440 Deming Way

Middleton, WI 53562 phone: 608-273-6380 meadhunt.com

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

M&H NO.:

DATE:

DESIGNED BY:

DRAWN BY:

CHECKED BY:

ISSUED

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

5/ 2/

1:

:1

AM

C :\R ev it

Lo ca l\3

-1

9.

-E

-C en tra l-2

7_ m rf.

rv t

W

IS

C O

N

SI

N A

IR

N

AT

IO

N

AL

G U

AR

D

TR

U

AX

F

IE

LD

A N

G B

M

AD

IS

O

N , W

I

AD

AL

B

E-001

NOTES, SYMBOLS &

ABBREVIATIONS

XGFG132020ANG NO.:

3141300-141489.01

MRF

ARG

May 4, 2017

JRH/MRF

ELECTRICAL ABBREVIATIONS

3R NEMA 3R RATING

4X NEMA 4X RATING

A AMPERES

A/E ARCHITECT / ENGINEER

AAC ABOVE ACCESSIBLE CEILING

ACCU AIR COOLED CONDENSING UNIT

AFF ABOVE FINISHED FLOOR

AFG ABOVE FINISHED GRADE

AHU AIR HANDLING UNIT

ALT ALTERNATE

APE AIRCRAFT PROCESS EQUIPMENT

ATS AUTOMATIC TRANSFER SWITCH

BLDG BUILDING

BRKR BREAKER

C CONDUIT

C.O.R. CONTRACTING OFFICER REPRESENTATIVE

CB CIRCUIT BREAKER

CF CIRCULATION FAN

CH CHILLER

CHWP CHILLED WATER PUMP

CKT CIRCUIT

CP CIRCULATION PUMP

CRAC COMPUTER ROOM AIR CONDITIONER

CRP CONDENSATION RETURN

CT COOLING TOWER

CUH CABINET UNIT HEATER

DC DROP CORD

DDC DIGITAL CONTROL PANEL

DH DUCT HEATER

DISC DISCONNECT

DO DOOR OPERATOR

DWG DRAWING

E/O ELECTRICAL-TO-OPTICAL CONVERTER

EC ELECTRICAL CONTRACTOR

ECB ENCLOSED CIRCUIT BREAKER

EF EXHAUST FAN

EM EMERGENCY

EMT ELECTRICAL METALLIC TUBING

ERL EXISTING TO BE RELOCATED

ERLD EXISTING RELOCATED

ES EQUIPMENT SUPPLIER

ETR EXISTING TO REMAIN

EWC ELECTRICAL WATER COOLER

EWH ELECTRICAL WATER HEATER

F FUSED

FA FIRE ALARM

FAF FORCED AIR FURNACE

FCU FAN COIL UNIT

GC GENERAL CONTRACTOR

GD GARBAGE DISPOSAL

GFI GROUND FAULT INTERRUPTER

GND GROUND

GWH GAS WATER HEATER

HD HAND DRYER

HP HORSEPOWER

HVAC HEATING, VENTILATION, AIR CONDITIONING

HWB HOT WATER BOILER

HWP HOT WATER PUMP

IEWH INSTANTANEOUS ELECTRIC WATER HEATER

IH INFRARED HEATER

IMC INTERMEDIATE METALLIC CONDUIT

INV INVERTER

IWH INSTANTANEOUS WATER HEATER

J-BOX JUNCTION BOX

LBS POUNDS

LFS LIGHTING FIXTURE SCHEDULE

MAU MAKE-UP AIR UNIT

MAX MAXIMUM

MC MECHANICAL CONTRACTOR

MCC MOTOR CONTROL CENTER

MDF MAIN DISTRIBUTION FRAME

MDP MAIN DISTRIBUTION PANEL

MIN. MINIMUM

MNS MASS NOTIFICATION SYSTEM

MTD MOUNTED

MTG MOUNTING

MTS MANUAL TRANSFER SWITCH

MW MICROWAVE

NIC NOT IN CONTRACT

NL NIGHT LIGHT

NL/EL NIGHT LIGHT AND EMERGENCY LIGHT

NTS NOT TO SCALE

OC ON CENTER

OFCI OWNER FURNISHED, CONTRACTOR INSTALLED

OFOI OWNER FURNISHED, OWNER INSTALLED

PH PHASE

PNL PANEL

PVC POLYVINYL CHLORIDE

RCP RADIANT CEILING PANEL

RECPT RECEPTACLE

REQ'D REQUIRED

RF RETURN FAN

RGS RIGID GALVANIZED STEEL CONDUIT

MAY ALSO BE REFERENCED AS RMC OR GRC

RMC RIGID METAL CONDUIT

RTU ROOF TOP UNIT

S/N SOLID NEUTRAL

SE SERVICE ENTRANCE

SEC-P SECURITY PANEL

SF SUPPLY FAN

SP SUMP PUMP

SS STAINLESS STEEL

SW SWITCH

SWBK SWITCH BANK

TBR TO BE REMOVED

TCP TEMPERATURE CONTROL PANEL

TFA TO FLOOR ABOVE

TFB TO FLOOR BELOW

TYP TYPICAL

UC UNIT COOLER

UG UNDERGROUND

UH UNIT HEATER

UNO UNLESS NOTED OTHERWISE

UV UNIT VENTILATER

V VOLTS

VER VEHICLE EXHAUST REEL

VFD VARIABLE FREQUENCY DRIVE

VS VERSUS

W WATTS

WCC WATER COOLED CONDENSER

WCR WITHSTAND CURRENT RATING

WFE WELDING FUME EXTRACTOR

WH WATER HEATER

WL WET LOCATION LISTED

WP WEATHERPROOF

XFMR TRANSFORMER

XP EXPLOSION PROOF

05/04/17 TYPE B3

O S

OS

OS

OS

OS

OS

OS OS

OS

O S

O S

O S

OS OS

OS

OS

OS

OS

OS

O S

O S

O S

OS

O S

O S O

S

OS

OS

OS

OS

OS

OS

OS

JJ

J

J

J J

A

A

B

B

C

C

D

D

E

E

F

F

G

G

H

H

J

J

K

K

L

L

M

M

N

N

P

P

Q

Q

R

R

S

S

T

T

24 24

23 23

22 22

21 21

20 20

19 19

18 18

17 17

16 16

15 15

14 14

13 13

12 12

11 11

10 10

9 9

8 8

6 6

5 5

4 4

3 3

2 2

1 1

LECTURN

(6)

ETR

ALERT INDICATOR

BEACON

ALERT INDICATOR

BEACON

ETR

ERL

ERL

ERL

ERL

J

ERL

9.002

9.003

PANEL MAIN

BRIEFING

Mead & Hunt, Inc.

2440 Deming Way

Middleton, WI 53562 phone: 608-273-6380 meadhunt.com

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

M&H NO.:

DATE:

DESIGNED BY:

DRAWN BY:

CHECKED BY:

ISSUED

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

5/ 2/

1:

:3

AM

C :\R ev it

Lo ca l\3

-1

9.

-E

-C en tra l-2

7_ m rf.

rv t

W

IS

C O

N

SI

N A

IR

N

AT

IO

N

AL

G U

AR

D

TR

U

AX

F

IE

LD

A N

G B

M

AD

IS

O

N , W

I

AD

AL

B

ED101

FIRST FLOOR

DEMOLITION PLAN -

LIGHTING

XGFG132020ANG NO.:

3141300-141489.01

MRF

ARG

May 4, 2017

JRH/MRF

KEYED NOTES

9.002 CAREFULLY DISCONNECT AND REMOVE ALERT SCRAMBLE INDICATOR

RELAY BOX FOR RELOCATION TO NEW TELECOM ROOM.

9.003 EXISTING BACK BOXES SHALL REMAIN TO SERVE NEW LIGHTING

CONTROLS.

PLAN

NORTH

TRUE

NORTH

1/8" = 1'-0"1 FIRST FLOOR DEMOLITION PLAN - LIGHTING

C

C

F

C

JJ

J

J

J J

C

C C

CC

A

A

B

B

C

C

D

D

E

E

F

F

G

G

J

J

K

K

L

L

M

M

N

N

P

P

Q

Q

R

R

S

S

T

T

24 24

23 23

22 22

21 21

20 20

19 19

18 18

17 17

16 16

15 15

14 14

13 13

12 12

11 11

10 10

9 9

8 8

6 6

5 5

4 4

3 3

2 2

1 1

PANEL LP1B

UPS

PANEL LP1A

PANEL LP1F

PANEL LP1G

FCU-1

EF-2

EWH-1B

EWH-1A ACCU-1

TV

BCU-1

ACCU-2

PANEL LP1D

PANEL LP1C PANEL MDP

CP-1

CUH

CUH

CUH CUH

CUHCUH

WP/GFCI

WP/GFCI

CUH

CUH

M

EXISTING

UTILITY

TRANS

9.001

ETRCUH

ATS

PANEL MAIN

BRIEFING

Mead & Hunt, Inc.

2440 Deming Way

Middleton, WI 53562 phone: 608-273-6380 meadhunt.com

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

M&H NO.:

DATE:

DESIGNED BY:

DRAWN BY:

CHECKED BY:

ISSUED

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

5/ 2/

1:

:5

AM

C :\R ev it

Lo ca l\3

-1

9.

-E

-C en tra l-2

7_ m rf.

rv t

W

IS

C O

N

SI

N A

IR

N

AT

IO

N

AL

G U

AR

D

TR

U

AX

F

IE

LD

A N

G B

M

AD

IS

O

N , W

I

AD

AL

B

ED131

FIRST FLOOR

DEMOLITION PLAN -

POWER

XGFG132020ANG NO.:

3141300-141489.01

MRF

ARG

May 4, 2017

JRH/MRF

PLAN

NORTH

TRUE

NORTH

1/8" = 1'-0"1 FIRST FLOOR DEMOLITION PLAN - POWER

05/04/17 TYPE B3

KEYED NOTES

9.001 UTILITY WILL BE RESPONSIBLE FOR ALL DEMOLITION WORK ASSOCIATED

WITH EXISTING UTILITY TRANSFORMER, PAD AND SECONDARY UTILITY

FEEDERS.

OS2

OS1

OS1

OS3

OS2

OS2

OS2

OS1

OS1OS1 OS1OS1

OS1

OS1

OS1

OS1

OS2

OS2

OS1

OS1

OS1

OS1

OS6

OS1

OS1

OS1

OS2

OS2

OS2

OS2

OS3

OS3

OS3

DS

OS2

OS1

OS2

OS4

OS3

OS1 OS1 OS1 OS1

OS5

OS5

OS1

OS1

OS1

OS1

OS1

OS1

OS1

OS5

OS5

OS5

DS

OS1

OS1

OS6

OS6 OS6

OS6

OS4

OS6

OS4

OS4

OS4

OS1

OS2

DS DS DS DS

DS

OS2

A

A

B

B

C

C

D

D

E

E

F

F

G

G

H

H

J

J

K

K

L

L

M

M

N

N

P

P

Q

Q

R

R

S

S

T

T

24 24

23 23

22 22

21 21

20 20

19 19

18 18

17 17

16 16

15 15

13 13

12 12

11 11

10 10

9 9

8 8

6 6

5 5

4 4

3 3

2 2

1 1

INTEL VAULT

CLASSROOM111

INTEL

INTEL OIC

BRIEFING

ROOM 3

BRIEFING

ROOM 1

HALLWAY

BRIEFING

ROOM 2

BRIEFING

ROOM 4

LIBRARY

STORAGE

BREAK ROOM

MISSION

PLANNING

WEAPONS

ACMI

ISSO & SSR

COMM/

COMPUTER

STORAGE

LOBBY

VEST

MX DEBRIEF

SECURED

VEST

FLIGHT

COMMANDERS

OPEN OFFICE

PM/PSM

SECURE

VAULT

CORR

SIMULATOR

SUPPORT

OFFICE

ARMS NCOIC

VEST

ARMS

COPY ROOM

SOF

VEST

AFMT NCOIC

STORAGE

TRAINING

OFFICER

SCHEDULING

HALLWAY

AIRFIELD

MANAGEMENT

DIRECTOR OF

OPERATIONS

VEST

HALLWAY

HALLWAY

CONFERENCE

ROOM

STAN EVAL

OPERATIONS

CHIEF 151

CCA

OSS

COMMANDER

MEN'S

TOILET/

LOCKER

ROOM

AFE NCOIC

AIRCREW

FLIGHT

EQUIPMENT

AFE

SUPERINTENDENT,

FEO

NVG

AFE

INSPECTION

ROOM

STORAGE

JANITOR

WOMEN'S

TOILET/

LOCKER

ROOM

HALLWAY

VEST

KITCHEN/

VENDING

BREAK ROOM

MAIN

BRIEFING

ROOM

MECH

AFE

STORAGE

ELEC

COMM

D

D D

DD

X1 X1

D

D

OS

D

OS

X1 X1

X1

D

D D D D

D

D D D D

D

D

D

OS

D

D

DD

D

D

D

D

D

INTEL NCOIC

BL

BB

B

B B

B

B

B

B

B

B

B

B

B

B

B B

B B B B

BB

B

B B B B

B

B

B

B B B

BB

B B

BB

BB

B B

B

BB

B B B

BB

B B

B B

BB

B

B

B B

B B

B

B

B

B

B

B B

B

B B

B B

B B B

BB B B

BB

BL

BL

D1 D1 D1 D1

D1 D1 D1 D1

D

D D D

DD

D ab

D ab

BL BL

BL BL

D D ab ab

LP1X-5a LP1X-5a

LP1X-5aLP1X-5a

LP1X-5a

LP1X-5a LP1X-5a

LP1X-5a a,b a,b a,ba,b

LP1X-5b LP1X-5b LP1X-5b LP1X-5b

LP1X-5bLP1X-5bLP1X-5bLP1X-5b

BL

BL

BL

BL

BL

a,b,c

11a 11a 11b

11b 11a

11a

11a 11a 11b

11c 11c 11c

11c11c11c

D a cb

B

D ab

7a 7a 7a

7b7b a,b

BL

BL

F

F

BL

BLB

B

BLBOS

B B

BB

DD

ab a,b

7a

7a

7b 7b

7a

7b

BL

B

U b 5b a,b

5a 5a

5a 5a a

3c D

3b 3a

DD

3a3b

3c

7c

5c 5c

7c5c

5c5c

LP1X-5a 7a

LP1X-5bLP1X-5b

LP1X-5b 7b

LP1X-5a LP1X-5a

LP1X-5b 7b

LP1X-5b 7b a,b,c a,b,c a,b,c

BL

BL

BL

B B

B B

BL

D

3d 3d

B 9d

B 7d d a a b

B

B

1a

3a

B 3b

3a

3a

3b

3b

X1

X1 X1 d,f c,d,f 3c

3c 3d

3d

X1

DD

B

B

B

B

B

B

B

B 1e

B 3e

B 1e

B 3e

B 1e

D1 3e3e e

B

BB

B 3a

3a3a

3a b a

D 3b

D 3b

B

B

B

B

B

B

D

B

B f

3f

3f f

B

B

T

D1 D1

D1D1

C1 C1D1

UNSW.

D2 D2UNSW.

B B B

C

B

B B B B

B B B B

D

B

B

D2

D2

D2

D2

T

T

C1 C1

C1C1

DD

D1

D1 D1

D1 D1

D1D1

D D

UNSW.

B B

BB

3f

3g g

3f

3g

D i

3i 3i

3i3i f,g,h,ji,k

D

Da b a,b

3a 3a

3a3a

D

D

D

D

3b 3b

3b3b

B 3a

B 1a

B 3a

B 3a

D1

OS

C C

B 3b

B 1b

B 3b

D D

3h

3h

F1 F1

F

F

F

F

OS

9.101 (TYP.)

9.101 (TYP.)

F F

F

OA

OA

OA

OA

OA

OA

OA

OA

OA OA

OA

INV

PANEL LP1X

PANEL LP1B

PANEL LP1F

PANEL LP1G

PANEL LP1A

9.102

B

X1

9.103

F1 F1 F1 F1

F1 F1 F1

F1 F1 F1 F1

F1

F1

(TYP.)

9a 1a 1a 9a

1b 9b 1b

9a 1a 1a 9a

9b

3a3b

D D3b 3a

9.105 a,b a,b a,b a,b

9.105 (TYP.)

EBU

EBU

9.101

9.101

G

G1

G2

G3

H H

HHH

H H H

HH

9.106 (TYP.)

9.110 X1

3f

5f

5g

3g

3g

3g

G4 G4 G4 G5LP1X-7d

LP1X-7d LP1X-7d LP1X-7c

3d

D

G6 G6 LP1X-7c 3c

D1

D1 D1

D1

H1 H1 H1 H1

H1 H1 H1 H1

H1 H1

9.107 (TYP.)

3h 3h

3g3g3h

3h 3g 3g

3g3g

3j

3j

9.108

1j 1j

1j1j3j1j

1j 3j 1j 1j

D1

D1

D1

5a

5a

5a

D1 5a

D1 5a

D1 5a

D 5d

D 5d

D 5d

D3 6c

D 6b

D 6bD

6b

D 6b

D 6b D

6b

D 6b

D 6bD

6b

X1 X1

X1

3a 3a

LECTURN

J1

J1 J1 J1

J1 J1J1

J1

J1 J1 J1

J1

J

JJ

J

7e

7e 7e 7e

7e 7e7e

7e

7e 7e 7e

7e

7e 7e7e

7e

4a b c d e f

D

OS

F

F

F

9.101

9.101

9.103

9.1049.104

9.1049.104

9.104

X1

X1 9.111

9.112(TYP.)

U 3k U k

X1

X1

9.101(TYP.)

X1

X1

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

PT

D1

D1

BL

BL

BL

B

BL

B

B

B

B

BB

B B

B

B

B B

B

B

B

B

9.114

9.115

9.116

B 3a

B

ETR

H1 1j

F2

9.117

D3 6c

D3 6c

ALL 120V NORMAL POWER

LIGHTING SHALL BE FED FROM

PANEL 'MAIN BRIEFING ROOM'

UNLESS NOTED OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1G' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1G' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1A' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER LIGHTING SHALL

BE FED FROM PANEL

'LP1A' UNLESS NOTED

OTHERWISE.

LP1X-3

LP1X-3

LP1X-5

LP1X-5

LP1X-5

3d

D

9.118 a,b

3 3

3 3

3 3 3

33 3 3

5 5

5 5

55 5

7 7

9.120 (TYP.)

ETR

VIA PT

VIA PT

VIA PT

K 7f

K 7f

K 7f

9.121 (TYP.)

D

D

11c

11c

D 11c

D 11c

D 11c

D 11c f

ERLD

LP1X-7f

OS

OS9.101

L

9.122

1b 1b

5 5

7 7 7

7 7

7 7

1b

5 5

7 7

9 9

13 13

9.106

X1

VIA PT

VIA PT VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PT

VIA PTVIA PT

9.101

9.101(TYP.)

D

9.123

D1 1a

D1 3j

D1 3j

D1 3j

3j D f,g,h,j

VIA PT

VIA PT

U 5b

9.120(TYP.)

E-101

FIGHTER

SQUADRON

COMMANDER

OPERATIONS

GROUP

COMMANDER

166C

STORAGE

166B

STORAGE

166A

STORAGE

WOMENS

ENTRY

AL

AL

AL

AL

AL

AL

J

ERLD

9.119

K

D

D

D

D

AL

AL

9.104

INVERTER

9.124

PANEL MAIN

BRIEFING

ALAL

VIA PT

X1

P

P

Q

Q

R

R

15 15

14 14

13 13

12 12

11 11

D

B B B

BB

B

B

7 7 7

AFE

INSPECTION

ROOM

U2

U2

U1

U2

U2

U1

U2

U1

U2

U2

U1 U2 U2 U2 U2 U2 U2 U1

7 7 7 7 7 7 7 7

79.120 (TYP.)

KEYED NOTES

9.101 MOUNT FIXTURE AT 8'-6" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.102 MOUNT FIXTURE AT 10'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

TYPICAL FOR ALL TYPE "OA" FIXTURES SHOWN ON THIS PLAN.

9.103 SECURE AREA PERIMETER. COORDINATE WITH GENERAL CONTRACTOR.

MINIMIZE, CO-LOCATE, AND SEAL ALL SECURE AREA PENETRATIONS. SEE

DETAIL 1/E-501. CAULK AND SEAL ALL CONDUIT PENETRATIONS IN A

MANNER THAT MAINTAINS ROOM'S SOUND TRANSMISSION CLASS (STC)

RATING OF 55. ALL DEVICES/CONDUIT LOCATED ON THIS PERIMETER WALL

SHALL BE SURFACE MOUNTED. UTILIZE WIREMOLD 700 SERIES OR EQUAL

SURFACE MOUNTED RACEWAY.

9.104 DOTTED LINE INDICATES BOUNDARY OF SOUND ASSEMBLY GROUP 4 -

MINIMUM STC 55. CAULK AND SEAL ALL CONDUITS IN A MANNER THAT

MAINTAINS ROOM'S SOUND TRANSMISSION CLASS (STC) RATING OF 55.

9.105 MOUNT FIXTURE AT 12'-6" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.106 MOUNT FIXTURE AT 8'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.107 MOUNT FIXTURE 2" BELOW SOUNDSCAPE BLADES MEASURED FROM

BOTTOM OF FIXTURE. FIXTURES SHALL BE MOUNTED BETWEEN

SOUNDSCAPE BLADES. COORDINATE EXACT LOCATION WITH RESPECTIVE

ARCHITECTURAL PLANS.

9.108 HIGH BAY OCCUPANCY SENSOR SHALL BE CORNER MOUNTED BELOW

SOUNDSCAPE BLADES TO ALLOW CLEAN VIEWING ANGLE.

9.110 MOUNT FIXTURE AT 7'-2" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.111 MOUNT FIXTURE AT 10'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.112 MOUNT FIXTURE AT 7'-0" AFF MEASURED FROM BOTTOM OF FIXTURE.

9.114 BLUE LIGHT SYSTEM MASTER PUSHBUTTON STATION. REFER TO DETAIL

4/E-501 FOR ADDITIONAL INFORMATION.

9.115 MOUNT BLUE INDICATOR LIGHT SURFACE MOUNTED ON BOTTOM OF

STRUCTURAL JOIST. TYPICAL FOR ALL 'BL' LIGHT FIXTURES SHOWN ON THIS

PLAN LOCATED IN ROOMS WITH EXPOSED CEILINGS.

9.116 HIGH BAY OCCUPANCY SENSOR SHALL BE MOUNTED ON BOTTOM OF

STRUCTURAL JOISTS. TYPICAL FOR 'OS6' OCCUPANCY SENSORS SHOWN

ON THIS PLAN.

9.117 FIXTURE IS MOUNTED FROM EXPOSED CEILING IN LOBBY 101 LOCATED

ABOVE CEILING SHOWN IN COMM/COMPUTER STORAGE 107. REFER TO

KEYED NOTE 9.107 FOR ADDITIONAL INFORMATION.

9.118 SECURE AREA PERIMETER. COORDINATE WITH GENERAL CONTRACTOR.

MINIMIZE, CO-LOCATE, AND SEAL ALL SECURE AREA PENETRATIONS. SEE

DETAIL 1/E-501.

9.119 EXISTING RELOCATED ALERT SCRAMBLE INDICATOR RELAY BOX.

INTERCEPT EXISTING DEDICATED PHONE LINE IN OLD COMM ROOM AND

EXTEND TO NEW ALERT SCRAMBLE INDICATOR RELAY BOX LOCATION. THIS

WILL ALLOW FOR REMOTE ACTIVATION FROM BUILDING 402 VIA BUILDING

505. COORDINATE LOCATION OF EXISTING PHONE LINE WITH C.O.R.

9.120 ROUTE CONDUIT CONCEALED FROM FLUSH SWITCH BOX TO BOTTOM SIDE

OF CABINET, AND PROVIDE SURFACE MOUNTED FLEXIBLE METAL CONDUIT

FROM WALL PENETRATION TO LIGHT FIXTURE. COORDINATE EXACT

MOUNTING LOCATION OF UNDERCABINET LIGHTING WITH ARCHITECTURAL

SECTIONS AND ELEVATIONS.

9.121 COVE FIXTURE SHALL BE MOUNTING IN EXISTING COVE SLOT. REFER TO

LIGHT FIXTURE SCHEDULE FOR ADDITIONAL INFORMATION.

9.122 FIXTURE SHALL BE INSTALLED IN ATTIC SPACE. MOUNT FIXTURE 2'-0"

BELOW ROOF DECK MEASURED FROM BOTTOM OF FIXTURE.

9.123 FIXTURE SHALL BE SURFACE MOUNTED AT TOP OF DISPLAY CASE. REFER

TO ARCHITECTURAL SECTIONS AND ELEVATIONS FOR ADDITIONAL

INFORMATION.

9.124 UTILIZE EXISTING BACK BOXES FOR INSTALLATION OF NEW LIGHTING

DIMMER SWITCHES.

Mead & Hunt, Inc.

2440 Deming Way

Middleton, WI 53562 phone: 608-273-6380 meadhunt.com

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

M&H NO.:

DATE:

DESIGNED BY:

DRAWN BY:

CHECKED BY:

ISSUED

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

5/ 3/

2:

:4

PM

C :\R ev it

Lo ca l\3

-1

9.

-E

-C en tra l-2

7_ m rf.

rv t

W

IS

C O

N

SI

N A

IR

N

AT

IO

N

AL

G U

AR

D

TR

U

AX

F

IE

LD

A N

G B

M

AD

IS

O

N , W

I

AD

AL

B

E-101

FIRST FLOOR PLAN -

LIGHTING

XGFG132020ANG NO.:

3141300-141489.01

MRF

ARG

May 4, 2017

JRH/MRF

PLAN

NORTH

TRUE

NORTH

1/8" = 1'-0"1 FIRST FLOOR PLAN - LIGHTING

PLAN

NORTH

TRUE

NORTH

1/4" = 1'-0"2 ENLARGED LIGHTING PLAN - AFE INSPECTION ROOM 159

F

F

C

C

C C

C C

C

C

M S

A

A

B

B

C

C

D

D

E

E

F

F

G

G

H

H

J

J

K

K

L

L

M

M

N

N

P

P

Q

Q

R

R

S

S

T

T

24 24

23 23

22 22

21 21

20 20

19 19

18 18

17 17

16 16

15 15

14 14

13 13

12 12

11 11

10 10

9 9

8 8

6 6

5 5

4 4

3 3

2 2

1 1

INTEL VAULT

CLASSROOM111

INTEL

INTEL OIC

INTEL NCOIC

BRIEFING

ROOM 3

BRIEFING

ROOM 1

HALLWAY

BRIEFING

ROOM 2

BRIEFING

ROOM 4

LIBRARY

STORAGE

BREAK ROOM

MISSION

PLANNING

WEAPONS

ACMI

ISSO & SSR

COMM/

COMPUTER

STORAGE

LOBBY

VEST

MX DEBRIEF

SECURED

VEST

FLIGHT

COMMANDERS

OPEN OFFICE

PM/PSM

SECURE

VAULT

CORR

SIMULATOR

ELEC

FIRE ALARM

SIMULATOR

SUPPORT

OFFICE

ARMS NCOIC

VEST

ARMS

COPY ROOM

SOF

VEST

AFMT NCOIC

STORAGE

TRAINING

OFFICER

SCHEDULING

HALLWAY

AIRFIELD

MANAGEMENT

DIRECTOR OF

OPERATIONS

FIGHTER

SQUADRON

COMMANDER

VEST

HALLWAY

HALLWAY

CONFERENCE

ROOM

STAN EVAL

OPERATIONS

CHIEF 151

CCA

OSS

COMMANDER

MEN'S

TOILET/

LOCKER

ROOM

AFE NCOIC

AIRCREW

FLIGHT

EQUIPMENT

AFE

SUPERINTENDENT,

FEO

NVG

AFE

INSPECTION

ROOM

STORAGE

JANITOR

WOMEN'S

TOILET/

LOCKER

ROOM

HALLWAY

VEST

KITCHEN/

VENDING

BREAK ROOM

MAIN

BRIEFING

ROOM

MECH

AFE

STORAGE

ELEC

COMM

TV

WP/GFCI

WP/GFCI

E-131

E-131

PANEL LP1A

CT CABINETGENERATOR PLUG

SIM 1 SIM 2

9.2019.201

GFCI GFCI

GFCIGFCI

GFCI GFCI

GFCI

WP/GFCI

WP/GFCI

WP/GFCI

WP/GFCI

M

VRF-W110

VRF-W109

VRF-W112VRF-W111

VRF-W105

VRF-W106

VRF-W100

VRF-W101

VRF-E118

VRF-E117

VRF-E122

VRF-E119

VRF-E109

VRF-E108

VRF-E107

VRF-E124

UTILITY

TRANS

VRF-W107

VRF-E120

VRF-W115

VRF-W114 VRF-W113

VRF-W103

VRF-E126

VRF-E116

VRF-E115 VRF-E123

VRF-E114

VRF-112

VRF-E113

VRF-E106 VRF-E104 VRF-E103

VRF-E111

VRF-E110 VRF-E101 VRF-E102

VRF-E125

VRF-W116

9.202

9.203

9.202

9.2039.203

9.2039.203

9.203

TVTV

TV

GFCI

EWC

VRF-W102

CRAC-1

CRAC-2

AHU-1

(ROOF)

AHU-2

(ROOF)

EF-1

(ROOF)

FC-2

ACCU-2

ACCU-4

ACCU-1A

ACCU-1B

GFCI

WP/GFCI

9.205

E

UTILITY PROVIDED

SECONDARY FEEDER

9.2129.207

9.207

9.207

9.207

9.207

9.207

9.207

9.207

9.2079.207

9.207

9.207

9.207

9.207

9.220

9.207

9.211

9.207

9.211

42" 74" 42" 74"

NEMA 6-30

9.208

GFCI

GFCI

GFCI

WP/GFCI

GFCI

44"

44"

44"

44"

GFCI

GD

9.209 9.210

VRF-W117

VRF-W108

VRF-105

VRF-E127

VRF-E100

VRF-E129

VRF-E128

VRF-W104

VRF-E121

BSB-6

BSB-5

BSB-4

BSB-2

BSB-1

BSB-3

CRAC-4

(ROOF)

FC-1

CUH-3

CUH-2

CUH-1

ETR

CUH

CUH-7

CUH-6

CUH-5

CUH-4

ALL 120V NORMAL POWER

DEVICES ARE ETR AND FED FROM

PANEL 'MAIN BRIEFING ROOM'

UNLESS NOTED OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1G' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1G' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1A' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1B' UNLESS NOTED

OTHERWISE.

ALL 120V NORMAL

POWER DEVICES SHALL

BE FED FROM PANEL

'LP1A' UNLESS NOTED

OTHERWISE.

E-131

9.207

GFCI

42" 74" 42" 74"

42" 74"

42" 74"

42" 74"

42" 74"

42" 42" 42" 42"

42" 42" 42"

74"

74"

LP1F-4LP1F-2

GFCI

LP1F-46

LP1F-48

LP1F-44

74"

74"

9.207

9.207

9.207

44"GFCI

GFCI

44"

GFCI

DW

CLOCK

84"

GFCIGFCI

78"60"

TP

TP

9.214

9.216

9.215

P-7 P-6

166C

STORAGE

166B

STORAGE

166A

STORAGE

WOMENS

ENTRY

9.213

L5-30R

L5-30R

MW

MW

60"

60"

UH-3

VRF-E130

72"

84"

84"

LP1B-13

LP1B-15

LP1B-15

J9.217 72

J9.217 72

J9.217 38

J

9.217

LP1B-66,68

LP1B-66,68

LP1B-66,68

LP1B-66,68

LP1B-66,68

LP1B-66,68

17 17 70

LP1B-11

79 17 17 70 24

LP1B-33

LP1B-50,52

LP1B-50,52

LP1B-62,64

LP1B-62,64

LP1B-62,64

LP1B-62,64

LP1B-62,64

LP1B-62,64 LP1B-62,64

LP1B-62,64

LP1B-62,64

LP1B-11

LP1B-9

9 9

9.218

LP1B-44,46,48

LP1B-74

9.218

LP1B-20

LP1B20

16,18

LP1B-55

36 36

LP1A-32

LP1B-43,45,47

LP1B-49,51,53

LP1B-58,60

LP1B-58,60

LP1B-58,60 LP1B-58,60 LP1B-58,60

LP1B-58,60LP1B-58,60

LP1B-58,60LP1B-58,60

LP1B-58,60

OPERATIONS

GROUP

COMMANDER

LP1B-50,52

LP1B-50,52

14 LP1A-14

LP1A-12

LP1B-54,56

LP1B-54,56

LP1B-54,56

LP1B-54,56

LP1B-54,56

LP1A-9 LP1X-23

LP1X-23

LP1X-19

LP1X-21

LP1X-19

LP1X-19

LP1X-15

LP1X-17

LP1X-15

LP1X-17

LP1X-15

LP1B-54,56

LP1X-15 LP1X-13

LP1X-13

LP1X-13

LP1F-1,3

LP1F-1,3

LP1F-1,3

LP1F-1,3

LP1F-1,3

LP1F-1,3

LP1F-1,3

LP1F-1,3

37 37

37 39

39 39

LP1F-62

LP1F-64

21 21

LP1F-5,7

LP1F-5,7

23 23

25 25 27

272525

29 29 33 33

LP1F-5,7

33332929

LP1G-38

LP1F-5,7 LP1F-5,7

14 12

12 12

9.219 9.219

6 4

22 20

LP1F-5,7

9.219 9.219

LP1F-5,7

30 28

LP1F-35,37,39

LP1F-54

LP1F-5,7

LP1F-54

LP1F-5,7

LP1F-56

LP1F-54

LP1F-54

LP1F-5,7

151917

LP1F-9,11

LP1F-9,11

LP1F-48

LP1F-48

LP1F-48

LP1F-48

LP1F-50

LP1F-50

LP1F-50

LP1F-50

LP1F-22,24,26 LP1F-28,30,32

LP1F-34,36,38LP1F-19,21,23

9.207

2 4

LP1F-8

LP1F-8

LP1F-8

LP1F-6

LP1F-6

LP1F-6

10 10

LP1F-40,42

LP1F-31,33

LP1F-12

LP1F-18

LP1F-14

LP1F-16

60"

LP1X-2

LP1F-13,15,17

18 18

44" 44"

LP1F-58 LP1F-58

9.2019.201

9.222 9.222

WP/GFCI

GFCI

GFCI

UH-4

LP1G-32

UTILITY METER

9.224

9.225

9.207

PANEL MAIN

BRIEFING

M

GD

LP2B-75

LP1F-62

LP1F-64

TV

72"

PROJECTOR

PROJECTOR

9.227

GFCI

9.226

MS

LP1F-66

9.228

L5-30R

LP1F-68

LP1F-70

L5-30R

LP1F-72

LP1F-74

LP1F-78

LP1F-76

L5-30R

T

T

16 16

15 15

14 14

ELEC

PANEL LP1B

M

TS

PANEL LP1X

INV

FMCPMIP

COMM

9.213

L5-30R

L5-30R

UH-2

LP1B-8

LP1B-10

LP1B-14

LP1B-12

LP1B-2

LP1B-2

LP1B-2

LP1B-4LP1B-6 44"

MSB

4" CONCRETE

PAD

2'

0"

4' - 0" 9.221

D

D

20 20

19 19

18 18

ELEC

FIRE ALARM

PANEL LP1F

PANEL LP1G

FMCP

LP1G-14

LP1G-30

LP1G-30

R

R

S

S

T

T

13 13

12 12

11 11EF-2

(ROOF)

CP-1 GWH-1

P-4

P-5

TCP P-3 P-2 P-1

HWB-1HWB-2HWB-3 UH-1

44"

MECH

DDC

LP1B-22

LP1B-24

LP1B-73LP1B-73

LP1B-55

LP1B-67,69,71

LP1B-61,63,65

LP1B-22

LP1B-24

LP1B-59 LP1B-59 LP1B-59

LP1B-57 LP1B-57 LP1B-57

LP1B-24

VFD

CRAC-3

LP1B-35,37

(ROOF)

39,41

ACCU-3

M

M

M

S S S

Mead & Hunt, Inc.

2440 Deming Way

Middleton, WI 53562 phone: 608-273-6380 meadhunt.com

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

M&H NO.:

DATE:

DESIGNED BY:

DRAWN BY:

CHECKED BY:

ISSUED

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

5/ 3/

:3

6:

P M

C :\R ev it

Lo ca l\3

-1

9.

-E

-C en tra l-2

7_ m rf.

rv t

W

IS

C O

N

SI

N A

IR

N

AT

IO

N

AL

G U

AR

D

TR

U

AX

F

IE

LD

A N

G B

M

AD

IS

O

N , W

I

AD

AL

B

E-131

FIRST FLOOR PLAN -

POWER

XGFG132020ANG NO.:

3141300-141489.01

MRF

ARG

May 4, 2017

JRH/MRF

PLAN

NORTH

TRUE

NORTH

1/8" = 1'-0"1 FIRST FLOOR PLAN - POWER

PLAN

NORTH

TRUE

NORTH

1/4" = 1'-0"2 ENLARGED POWER PLAN - ELEC 170 & COMM 171

PLAN

NORTH

TRUE

NORTH

1/4" = 1'-0"3 ENLARGED POWER PLAN - ELEC 127 & FIRE ALARM 126

KEYED NOTES

9.201 SIMULATOR SERVER/TELECOMMUNICATION ELECTRICAL CONNECTION.

VERIFY EXACT NEMA CONFIGURATION IN FIELD.

9.202 SECURE AREA PERIMETER. COORDINATE WITH GENERAL CONTRACTOR.

MINIMIZE, CO-LOCATE, AND SEAL ALL SECURE AREA PENETRATIONS. SEE

DETAIL 1/E-501. CAULK AND SEAL ALL CONDUIT PENETRATIONS IN A

MANNER THAT MAINTAINS ROOM'S SOUND TRANSMISSION CLASS (STC)

RATING OF 55.

9.203 DOTTED LINE INDICATES BOUNDARY OF SOUND ASSEMBLY GROUP 4 -

MINIMUM STC 55. CAULK AND SEAL ALL CONDUITS IN A MANNER THAT

MAINTAINS ROOM'S SOUND TRANSMISSION CLASS (STC) RATING OF 55.

9.205 PROVIDE (3) 4" PVC CONDUITS. CONDUIT SHALL BE STUBBED OUT OF

BUILDING 3'-0" AND BELOW GRADE TO CONNECT WITH UTILITY PROVIDED

SECONDARY FEEDER. COORDINATE INSTALLATION WITH UTILITY PRIOR TO

INSTALLATION.

9.207 PROVIDE WIREMOLD V2400 (OR EQUAL) DUAL CHANNEL STEEL SURFACE

MOUNTED RACEWAY WITH DIVIDERS. SURFACE MOUNTED RACEWAY SHALL

BE INSTALLED AT 18" AFF, UNLESS NOTED OTHERWISE.

9.208 VERIFY NEMA CONFIGURATION WITH ACTUAL EQUIPMENT INSTALLED.

9.209 GROUND METAL WATER PIPES PENETRATING SECURE WALLS IN THIS

LOCATION. GROUNDING CONNECTION SHALL BE ON SECURE SIDE OF

PERIMETER INDICATED. REFER TO MECHANICAL, PLUMBING AND FIRE

PROTECTION PLANS FOR EXACT QUANTITY OF WATER PIPES. GROUND

WITH #4AWG.

9.210 SECURE AREA PERIMETER. COORDINATE WITH GENERAL CONTRACTOR.

MINIMIZE, CO-LOCATE, AND SEAL ALL SECURE AREA PENETRATIONS. SEE

DETAIL 1/E-501.

9.211 PROVIDE WIREMOLD V2400 (OR EQUAL) DUAL CHANNEL STEEL SURFACE

MOUNTED RACEWAY WITH DIVIDERS FOR DEVICES INDICATED.

COORDINATE RECEPTACLE/WIREMOLD LOCATION FOR DEVICES AT 42" AND

74" WITH C.O.R. PRIOR TO INSTALLATION.

9.212 PROVIDE WIREMOLD V2400 (OR EQUAL) DUAL CHANNEL STEEL SURFACE

MOUNTED RACEWAY WITH DIVIDERS FOR DEVICES INDICATED.

COORDINATE RECEPTACLE/WIREMOLD LOCATION FOR DEVICES AT 42"

WITH C.O.R. PRIOR TO INSTALLATION.

9.213 MOUNT TO BOTTOM OF (4) POST TELECOM RACK. COORDINATE EXACT

LOCATION IN FIELD WITH ACTUAL TELECOM RACK INSTALLED. FEED WITH

FLEXIBLE METAL CONDUIT.

9.214 PROVIDE WIREMOLD V4000 (OR EQUAL) DUAL CHANNEL STEEL SURFACE

MOUNTED RACEWAY WITH DIVIDERS. PROVIDE (6) TWO-GANG COVERS

WITH (1) DUPLEX RECEPTACLE AND ADAPTER FOR (2) DATA OUTLETS.

COVERS SHALL BE SPACED EVENLY TO ALLOW EASY ACCESS FROM

LAPTOP SLOTS. SURFACE MOUNTED RACEWAY SHALL BE INSTALLED

VERTICALLY ON THE FRONT FACE OF LAPTOP CHARGING STATION CABINET.

COORDINATE WITH GC AND MILLWORK CONTRACTOR PRIOR TO

INSTALLATION. REFER TO ARCHITECTURAL SECTIONS AND ELEVATIONS

FOR ADDITIONAL INFORMATION.

9.215 SAW CUT EXISTING FLOOR SLAB FOR INSTALLATION OF UNDERSLAB

POWER AND DATA CONDUITS. PATCH FLOOR TO MATCH NEW SURFACE.

9.216 PROVIDE DOUBLE-GANG, FULLY ADJUSTABLE, CAST-IRON FLOOR BOX

(WIREMOLD OMNIBOX OR EQUAL). PROVIDE MATCHING BRUSHED

ALUMINUM COVER PLATE FLANGE AND COVER PLATE. COORDINATE EXACT

LOCATION OF FLOOR BOX WITH OWNER AND ARCHITECT PRIOR TO

INSTALLATION.

9.217 ROUTE (2) #12, (1) #12 GND IN 3/4" C. TO NEW JUNCTION BOX FOR FUTURE

ACCESS CONTROL AT EXTERIOR DOOR. JUNCTION BOX SHALL BE LOCATED

ABOVE ACCESSIBLE CEILING.

9.218 MOUNT DUPLEX RECEPTACLE ON MECHANICAL EQUIPMENT LOCATED ON

ROOF.

9.219 ALL 120V NORMAL POWER DEVICES LOCATED IN THIS ROOM SHALL BE FED

FROM PANEL 'LP1X' UNLESS NOTED OTHERWISE.

9.220 PROVIDE WIREMOLD V2400 (OR EQUAL) DUAL CHANNEL STEEL SURFACE

MOUNTED RACEWAY WITH DIVIDERS FOR DEVICES INDICATED.

COORDINATE RECEPTACLE/WIREMOLD LOCATION FOR DEVICES AT 44"

WITH COR PRIOR TO INSTALLATION.

9.221 DIMENSIONS SHOWN FOR 'MSB' REPRESENT THE MAXIMUM ALLOWABLE

DEPTH AND WIDTH OF EQUIPMENT NEEDED TO BE INSTALLED.

9.222 COORDINATE EXACT LOCATION OF SIM PANEL AND DISCONNECT WITH

SIMULATOR EQUIPMENT PROVIDER AND INSTALLER.

9.224 PROVIDE WIREMOLD V2400 (OR EQUAL) DUAL CHANNEL STEEL SURFACE

MOUNTED RACEWAY WITH DIVIDERS FOR DEVICES INDICATED.

COORDINATE RECEPTACLE/WIREMOLD LOCATION FOR DEVICES AT 74"

WITH COR PRIOR TO INSTALLATION.

9.225 RECEPTACLE SHALL SERVE OVERHEAD COILING DOOR. RECEPTACLE

SHALL BE LOCATED ABOVE ACCESSIBLE CEILING. COORDINATE EXACT

LOCATION WITH GC AND C.O.R. PRIOR TO INSTALLATION.

9.226 PROVIDE WIREMOLD V2400 (OR EQUAL) DUAL CHANNEL STEEL SURFACE

MOUNTED RACEWAY WITH DIVIDERS FOR DEVICES INDICATED.

COORDINATE RECEPTACLE/WIREMOLD LOCATION FOR DEVICES AT 18" AND

72" WITH C.O.R. PRIOR TO INSTALLATION.

9.227 COORDINATE EXACT LOCATION OF PROJECTOR DUPLEX RECEPTACLE

INTENDED FOR DOCUMENT VISUALIZER PRIOR TO INSTALLATION.

9.228 MOTORIZED SCREEN IS GFGI. EC SHALL PROVIDE POWER WIRING TO

MOTORIZED SCREEN AND LOW VOLTAGE WIRING TO SWITCH. COORDINATE

EXACT LOCATION WITH C.O.R. PRIOR TO INSTALLATION.

PLAN

NORTH

TRUE

NORTH

1/4" = 1'-0"4 ENLARGED POWER PLAN - MECH 172

1/2" MINIMUM

SEPARATION BETWEEN

STEEL CONDUIT

CLASS 1 TYPE A

DIELECTRIC LINK

THREADED COUPLING

(SCH. 80 PVC)

SECURE AREA INTERIOR WALL

SEAL WITH ACOUSTICAL FIRE PROOF

SEALANT ALL THE WAY AROUND

FINISHED FLOOR

84" AFF OR 6" BELOW

CEILING, WHICHEVER IS

LOWER

46"

18"

POWER, TELEPHONE AND DATA

RECEPTACLES LOCATED IN

OFFICES AND OTHER FINISHED

AREAS UNLESS NOTED

OTHERWISE.

ALL SWITCHES AND WALL MOUNTED

PHONES. POWER RECEPTACLES

LOCATED IN UNFINISHED AREAS

UNLESS NOTED OTHERWISE.

ALL FIRE ALARM AUDIBLE,

VISUAL, AND AUDIBLE/VISUAL

DEVICES UNLESS NOTED

OTHERWISE.

NOTES:

MOUNTING HEIGHT DIMENSION FOR ELECTRICAL RECEPTACLES AND

VOICE/DATA OUTLETS ABOVE COUNTER IS HEIGHT AFF TO BOTTOM OF

OUTLET BOX.

TOP OF DEVICE

BOTTOM OF

OUTLET BOX

1.

MOUNTING HEIGHT TO

OPERATING HANDLE

46" AFF.

ALL FIRE ALARM PULL

STATION DEVICES UNLESS

NOTED OTHERWISE.

INVERTER

NL G

PT

L S N

LOCAL ROOM LIGHT SWITCH

ROOM OCCUPANCY SENSOR

NORMAL LIGHTING FIXTURE.

FOR TYPE SEE LIGHTING PLANS

EMERGENCY LIGHTING FIXTURE.

FOR TYPE SEE LIGHTING PLANS

UNIT SHALL BE MANUFACTURED BY

LVS, TYPE LVS, TYPE EPC OR BE

EQUIVALENT BODINE, IOTA OR

DUAL-LITE. PROVIDE WITH TEST

SWITCH.

EXIT

SIGN

#3/0 GRD

#3/0 GRD

#2 GRD

#6 GRD

TO TELECOM ROOM GROUNDING

BUSBAR

(TGB)

#3/0 GRD

#3/0 GRD

TO TELECOM ROOM GROUNDING

BUSBAR

(TGB)

CABLE TRAY

TELECOM EQUIPMENT RACK(S)

MAIN TELECOM ROOM

MAIN GROUNDING BUSBAR (TMGB)

STREET SIDE OF BUILDING

WATER METER. CONNECT TO

METALLIC WATER MAIN

WITHIN 5'-0" OF WATER

SERVICE ENTRANCE. PROVIDE

JUMPER ACROSS WATER METER.

MSB GROUND BUS

PROVIDE EXOTHERMIC WELD FOR

CONNECTION OF CONDUCTORS TO

GROUND BUS OR CONDUCTORS CAN BE

ATTACHED USING CRIMPED ON LUGS

(WITH LISTED CRIMPER) AND BOLTED TO

GROUND BUS.

MDP

NEUTRAL BUS

NOTES:

1. ALL GROUND CONDUCTORS TO BE ROUTED IN PVC CONDUIT.

2. ALL GROUND CONDUCTORS ON THIS DIAGRAM SHALL BE COPPER.

#3/0 AWG

REMOVABLE LINK

BUILDING STEEL

PROVIDE NEW GROUNDING CONNECTION

AT EXISTING BUILDING STEEL IN ELEC 174.

#3/0 GRD

GROUNDING ELECTRODE CONDUCTOR

SIZED PER NEC 250.66.

3/4" X 10'-0" COPPERWELD GROUND

ROD. SEE FLOOR PLANS AND

SPECIFICATION SECTION 26 05 26.

BL

BLUE LIGHT BEACON

NORMALLY OPEN CONTACT

NORMALLY CLOSED CONTACT

MOMENTARY SWITCH NORMALLY OPEN

MOMENTARY SWITCH NORMALLY CLOSED

X CONTROL RELAY

TERMINA / CONNECTION

CONTROLS LEGENDSYMBOL

M

BL

BL

L

MASTER ON

MASTER OFF

LP1X-1

MB

MA

WHT/BLK

WHT/YEL N

BLK

BLK

WHT

WHT

YEL

YEL

LA

LB

LOCAL OVERRIDE

TYPICAL COMMON AREA. NO

LOCAL FLASH OVERRIDE

TYPICAL PRIVATE ROOM WITH

LOCAL FLASH OVERRIDE.

PROVIDE QUANTITY AS

INDICATED ON SHEET E-101.

BLUE LIGHT SYSTEM SEQUENCE OF OPERATION:

WHEN AN ESCORT PUSHES THE ON BUTTON IN THE MASTER PUSHBUTTON

STATION LOCATED IN ROOM 103 THE FOLLOWING OPERATIONS SHALL OCCUR.

THE FLASHING BLUE LIGHT IN EACH OF THE BLUE LIGHT ASSEMBLIES SHALL

TURN ON AND START FLASHING.

WHEN ONE OF THE USERS PRESSES ONE OF THE LOCAL OVERRIDE

PUSHBUTTONS THE FOLLOWING OPERATION SHALL OCCUR.

THE FLASHING BLUE LIGHT CLOSEST TO THE LOCAL OVERRIDE SWITCH SHALL

STOP FLASHING AND REMAIN IN A "STEADY ON" STATE.

WHEN AN ESCORT PUSHES THE OFF BUTTON IN THE MASTER PUSHBUTTON

STATION LOCATED IN ROOM 103 THE FOLLOWING OPERATIONS SHALL OCCUR.

THE FLASHING BLUE LIGHT IN EACH OF THE BLUE LIGHT ASSEMBLIES SHALL

TURN OFF.

THE STEADY BLUE LIGHT IN EACH OF THE BLUE LIGHT ASSEMBLIES SHALL

TURN OFF.

ALL LOCAL OVERRIDE RELAYS SHALL RESET AND RETURN TO THE NORMALLY

CLOSED POSITION.

1.

1.

1.

2.

3.

TO NEXT VRF(S) IF

APPLICABLE. REFER TO

SHEET E-602 FOR EQUIPMENT

WIRING SCHEDULE

30A, 600VAC DOUBLE POLE

MANUAL MOTOR STARTER,

TYPICAL

NOTES:

1. PHASE WIRING ONLY SHOWN, GROUND WIRING NOT SHOWN FOR CLARITY.

208V, 1PH POWER SOURCE

SEE SHEET E-131 FOR POWER SOURCE/CIRCUITRY

VRF VRF VRF

R

Y

G

N120VAC

LP1X-9

R

Y

G

WHT

R

Y

G

R

Y

G

R

Y

G

R

Y

G

R

Y

G

R

Y

G

RED

YEL

BLU

RIB

R

RIB

Y

RIB

G

ERLD

ALERT SCRAMBLE

INDICATOR RELAY BOX

#12 AWG

R

Y

G

R

Y

G

Mead & Hunt, Inc.

2440 Deming Way

Middleton, WI 53562 phone: 608-273-6380 meadhunt.com

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

M&H NO.:

DATE:

DESIGNED BY:

DRAWN BY:

CHECKED BY:

ISSUED

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

5/ 2/

1:

:2

AM

C :\R ev it

Lo ca l\3

-1

9.

-E

-C en tra l-2

7_ m rf.

rv t

W

IS

C O

N

SI

N A

IR

N

AT

IO

N

AL

G U

AR

D

TR

U

AX

F

IE

LD

A N

G B

M

AD

IS

O

N , W

I

AD

AL

B

E-501

DETAILS

XGFG132020ANG NO.:

3141300-141489.01

MRF

ARG

May 4, 2017

JRH/MRF

NO SCALE1 SECURE AREA PENETRATION DETAIL

NO SCALE2 DEVICE MOUNTING HEIGHT

NO SCALE3 INVERTER WIRING DIAGRAM

NO SCALE5 GROUNDING SYSTEM DETAIL (TYP)

NO SCALE4 BLUE LIGHT SYSTEM

NO SCALE6 TYPICAL VRF WIRING SCHEMATIC - MULTIPLE UNITS

NO SCALE7 ALERT SCRAMBLE LIGHT SYSTEM

Mead & Hunt, Inc.

2440 Deming Way

Middleton, WI 53562 phone: 608-273-6380 meadhunt.com

SHEET NO.:

SHEET CONTENTS

DO NOT SCALE DRAWINGS

M&H NO.:

DATE:

DESIGNED BY:

DRAWN BY:

CHECKED BY:

ISSUED

© Copyright This document, or any portion thereof, shall not be duplicated, disclosed, or used on any other project or extension of this project except by written agreement with Mead & Hunt, Inc. Mead & Hunt shall not be responsible for any unauthorized use of, or alteration to these documents.

5/ 2/

1:

:3

AM

C :\R ev it

Lo ca l\3

-1

9.

-E

-C en tra l-2

7_ m rf.

rv t

W

IS

C O

N

SI

N A

IR

N

AT

IO

N

AL

G U

AR

D

TR

U

AX

F

IE

LD

A N

G B

M

AD

IS

O

N , W

I

AD

AL

B

E-601

SCHEDULES

XGFG132020ANG NO.:

3141300-141489.01

MRF

ARG

May 4, 2017

JRH/MRF

CHORIDE/PHILIPS

EBU LITHONIA ELM2-LED-SD EMERGENCY BATTERY UNIT LED UNV - W - 2-5/8" 1.44 -

SURE-LITES/EATON

CHORIDE/PHILIPS

X1 LITHONIA LE-S-1-R-ELN-SD SINGLE FACE EXIT SIGN LED UNV - V V 1.75" 1 -

SURE-LITES/EATON

COOPER/EATON

OA LITHONIA

DSXW2 LED-20C-350-40K

-T3M-MVOLT-DMG-PIR1F

C3V-SPD-DDBXD

EXTERIOR WALL MOUNT LED, 4000K UNV D W - 10" 25 2,999

GARDCO/PHILIPS

PHILIPS

U2 FINELITE UC-E-22"-SILVER-PS-XX

W-OCC 22" UNDERCABINET LED, 4000K 120 E S - 0.85 6.1 380

LITHONIA

PHILIPS

U1 FINELITE UC-E-12"-SILVER-PS-XX

W-OCC 12" UNDERCABINET LED, 4000K 120 E S - 0.85 4 196

LITHONIA,

FINELITE

U PHILIPS 523-000027-76 19" UNDERCABINET LED, 4000K 120 E S - 0.88 13 479

COOPER/EATON

METALUX

L CREE LS4-25L-40K-10V 4' LINEAR STRIP LED, 4000K UNV D S - 3" 23 2,500

LITHONIA

ILIGHT TECHNOLOGIES

K MODA LIGHT FF-W-4000K

KINDA-S-W FLEXIBLE LED TAPE FIXTURE - COVE LIGHTING LED, 4000K 120 D S GWB 0.2" 4 / FT 311 / FT

TIVOLI

PRUDENTIAL LIGHTING

J1 AXIS BBRLED-B3-MF-400-80-4

0-FL-5-W-UNV-D-1 5' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

PRUDENTIAL LIGHTING

J AXIS BBRLED-B3-MF-400-80-4

0-FL-3-W-UNV-D-1 3' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

GOTHAM/ACUITY

H1 PATHWAY C12X6PLCR-850-4K-DG-4

VLEDC12HAZPF-MW 6" DIAMETER CYLINDER DOWNLIGHT LED, 4000K UNV D P ES 12" 11 850

CAPRI/PHILIPS

GOTHAM/ACUITY

H PATHWAY C12X6PLCR-850-4K-DG-4

VLEDC12HAZPF-MB 6" DIAMETER CYLINDER DOWNLIGHT LED, 4000K UNV D P ES 12" 11 850

CAPRI/PHILIPS

PRUDENTIAL LIGHTING

G6 AXIS BBRLED-B3-MF-400-80-4

0-1.5P-S10-W-UNV-D-1 10' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

PRUDENTIAL LIGHTING

G5 AXIS BBRLED-B3-MF-400-80-4

0-1.5P-S15-W-UNV-D-1 15' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

PRUDENTIAL LIGHTING

G4 AXIS BBRLED-B3-MF-400-80-4

0-1.5P-S15-W-UNV-D-2 15' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

PRUDENTIAL LIGHTING

G3 AXIS BBRLED-B3-MF-400-80-4

0-1.5P-S16-W-UNV-D-1 16' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

PRUDENTIAL LIGHTING

G2 AXIS BBRLED-B3-MF-400-80-4

0-1.5P-S16-W-UNV-D-2 16' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

PRUDENTIAL LIGHTING

G1 AXIS BBRLED-B3-MF-400-80-4

0-1.5P-S24-W-UNV-D-2 24' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

PRUDENTIAL LIGHTING

G AXIS BBRLED-B3-MF-400-80-4

0-1.5P-S24-W-UNV-D-1 24' LINEAR LED, 4000K UNV D R LG 3-15/16" 3.6 / FT 400 / FT

LUMENWERX

DAYBRITE/PHILIPS

F2 METALUX 4-ILED-5-W-WG-UNV-L84

0-CD-1-U 4' INDUSTRIAL LED, 4000K UNV D S ES 4-15/16" 36.6 5,101

LITHONIA/ACUITY

DAYBRITE/PHILIPS

F1 METALUX

4-ILED-7-W-WG-UNV-L84

0-CD-1-U-AYC-CHAIN/SE

T/U

4' INDUSTRIAL LED, 4000K UNV D P ES 4-15/16" 56.5 7,246

LITHONIA/ACUITY

DAYBRITE/PHILIPS

F METALUX

4-ILED-5-W-WG-UNV-L84

0-CD-1-U-AYC-CHAIN/SE

T/U

4' INDUSTRIAL LED, 4000K UNV D P ES 4-15/16" 36.6 5,101

LITHONIA/ACUITY

JUNO/ACUITY

D3 HALO H457-TAT-E010-ELG406-

9-40-WH-L113 4" DIAMETER LED ADJUSTABLE DOWNLIGHT LED, 4000K UNV D R GWB 4.59" 13 930

DRYWALL KIT CAPRI/PHILIPS

JUNO/ACUITY

D2 HALO H457-ICAT-1E-EL406-930

-TL402HS-TRM400SN 4" DIAMETER LED DOWNLIGHT (WET LOCATION) LED, 4000K 120 D R GWB 5-3/8" 13 900

38 CAPRI/PHILIPS

COOPER/EATON

D1 CREE KR6-13L-40K-120V-10V

KR6TR-SSGC-WF 6" DIAMETER DOWNLIGHT LED, 4000K 120 D R V 7.4" 18 1,100

LITHONIA/ACUITY

COOPER/EATON

D CREE KR6-9L-40K-120V-10V

KR6TR-SSGC-WF 6" DIAMETER DOWNLIGHT LED, 4000K 120 D R V 7.4" 13 700

LITHONIA/ACUITY

COOPER/EATON

C1 CREE CR14-22L-40K-10 1' X 4' VOLUMETRIC TROFFER LED, 4000K UNV J R LG 4.5" 22 2,200

LITHONIA/ACUITY

COOPER/EATON

C CREE CR14-22L-40K-10-DGA-14

-WHT 1' X 4' VOLUMETRIC TROFFER LED, 4000K UNV J R DW 4.5" 22 2,200

LITHONIA/ACUITY

BL EDWARDS SIGNAL 125XBRMB120A BLUE LIGHT BEACON LED 120 - V V 3.875" - -

COOPER/EATON

B CREE LR22-34L-40K-10V 2' X 2' TROFFER LED, 4000K UNV J R LG 3.6" 35 3,400

LITHONIA/ACUITY

AL FEDERAL SIGNAL LSLD-120-G-A-R GREEN/ORANGE/RED ALERT SCRAMBLE INDICATOR BEACON LED 120 - S LG 13.05" - -

DES. MANUFACTURER CATALOG SERIES DESCRIPTION LAMP DATA VOLTAGE BALLAST/

DRIVER MOUNT CEILING

TYPE

FIXTURE

DEPTH

LED

SYSTEM

INPUT

WATTAGE

LED

DELIVERED

LUMENS

OPTIONS /

ACCESSORIES

ACCEPTABLE

MANUFACTURERS

KEYED

NOTE

LG = LAY-IN GRID PL = POLE MOUNTED UNV = UNIVERSAL VOLTAGE

ES = EXPOSED STRUCTURE PLAS = PLASTER S = SURFACE W = WALL MOUNTED

ABBREVIATIONS: GWB = GYPSUM WALL BOARD P = PENDANT R = RECESSED V = VARIES

NOTE: SEE SPECIFICATION FOR ADDITIONAL INFORMATION REGARDING LUMINAIRE AND INSTALLATION REQUIREMENTS. PROVIDE OPTIONS AND ACCESSORIES REFERENCED BY THE COLUMN TITLED " OPTIONS/ACCESSORIES". MANUFACTURERS LISTED ACCEPTABLE SHALL MEET ALL REQUIREMENTS AND FEATURES INDICATED. ACCEPTABLE MANUFACTURERS MUST MEET THE PHOTOMETRIC PERFORMANCE OF THE LISTED UNIT.

LUMINAIRE SCHEDULE

2. PROVIDE (1) OCCUPANCY SENSOR AND PROPER POWER SUPPLY SIZE FOR EACH

SWITCHING ARRANGEMENT SHOWN ON LIGHTING FLOOR PLAN.

1. FIELD VERIFY AND PROVIDE EXACT LENGTH OF FIXTURE REQUIRED TO

ACCOMMODATE THE DESIGNATED LOCATION SHOWN ON LIGHTING PLANS. PROVIDE

ALL ACCESSORIES REQUIRED TO CREATE A COMPLETE AND OPERATIONAL SYSTEM.

DIMMABLE POWER SUPPLY QUANTITIES SHALL BE VERIFIED BASED ON ACTUAL

LENGTH. FOR BIDDING PURPOSES ASSUME MIN. OF 100W POWER SUPPLY PER EVER...

KEYED NOTES:

1. EC SHALL VERIFY AND COORDINATE ALL LUMINAIRE TRIMS/FLANGES WITH

RESPECTIVE CEILING TYPES SCHEDULED AND/OR SUBMITTED BY THE GC PRIOR TO

ORDERING OF THE LUMINAIRES. SCHEDULE INDICATES TRIM TYPES BASED ON THE

GENERIC CEILING INFORMATION AVAILABLE AT THE TIME BIDDING DOCUMENTS WERE

ISSUED AND DOES NOT REFLECT ACTUAL THICKNESS OF GYPSUM WALL BOARD OR

PLASTER CEILING OR EXACT GRID TYPE SPECIFIED BY THE ARCHITECT.

GENERAL NOTES:

J LED DIMMABLE POWER SUPPLY (0-10V) (DIMMING TO 5%).

H LED DIMMABLE POWER SUPPLY ADVANCE XITANIUM OR EQUAL.

G LED DIMMABLE POWER SUPPLY 1% DIMMING LUTRON HI LUME OR EQUAL.

F LED DIMMABLE POWER SUPPLY (TRAILING EDGE).

E LED NON-DIMMABLE POWER SUPPLY

D LED DIMMABLE POWER SUPPLY (0-10V).

BALLAST/DRIVER CODE LISTING: (SEE SPECIFICATIONS)

38 WET LOCATION LISTED

37 FROSTED LENS REFLECTOR, SATIN LENS DIFFUSER

36 CUSTOM PAINTED FINISH - COLOR AS SELECTED BY ARCHITECT

35 FURNISH TRIM SUITABLE FOR USE WITH NARROW TEE CLG SYSTEM

34 WHITE STRAIGHT BLADE LOUVERS

33 1/2" X 1/2" X 1/2" SILVER PARACUBE LOUVER

32 FURNISH WITH PHOTO CELL

31 FURNISH WITH SOLID FRONT

30 PATTERN 12 ACRYLIC LENS - 0.187" MIN. THICKNESS

29 PATTERN 12 ACRYLIC LENS - 0.156" MIN. THICKNESS

28 PATTERN 12 ACRYLIC LENS - 0.125" MIN. THICKNESS

27 FURNISH WITH SWIVEL CANOPY

26 FURNISH WITH RIGID PENDANT STEMS

25 FURNISH WITH CHAIN MOUNTING ACCESSORIES

24 FURNISH WITH WIRE GUARD

23 FURNISH WITH AUXILIARY EMERGENCY...

22 FURNISH WITH SLOPE ADAPTER - VERIFY SLOPE

21 FURNISH WITH ASYMMETRIC REFLECTOR

20 FURNISH WITH SYMMETRIC REFLECTOR

19 ADA COMPLIANT

18 BLACK MILLIGROOVE BAFFLE

17 WHITE MILLIGROOVE BAFFLE

16 REFLECTOR COLOR OTHER THAN CLEAR

15 MATTE DIFFUSE CLEAR REFLECTOR

14 STAINLESS STEEL TRIM & DOOR FRAME

13 DAMP LOCATION LISTED

12 ANTIMIRCOBIAL PROTECTION PAINTED FINISH

11 TRIPLE GASKETED DOOR FRAM, LENS & BODY

10 DOUBLE GASKETED DOOR FRAME

09 SINGLE GASKETED DOOR FRAME

08 FLAT STEEL DOOR FRAME

07 REGRESSED ALUMINUM DOOR FRAME

06 FLAT ALUMINUM DOOR FRAME

05 LOW IRIDESCENT PARABOLIC LOUVER

04 SEMI-SPECULAR PARABOLIC LOUVER

03 4" DEEP PARABOLIC LOUVERS

02 3" DEEP PARABOLIC LOUVERS

01 AIR HANDLING CAPABILITY - RETURN AIR

OPTIONS/ACCESSORIES CODE LISTING:

2. REFER TO SPECIFICATIONS FOR DEVICE AND WALL PLATE FINISH COLORS.

1. PROVIDE 20A RATED POWER PACKS WITH ZERO CROSS SWITCHING TECHNOLOGY AND MANUAL ON MODE.

KEYED NOTES:

3. MANUFACTURER SHOWN AS A BASIS OF DESIGN.

2. PROVIDE ADEQUATE SUPPORT FOR CONTROL WIRING.

1. PROVIDE 8' OF ADDITIONAL WIRING ABOVE ACCESSIBLE CEILING.

GENERAL NOTES:

DS 12-24V - - - - 0 FC (MIN) TO 50-750 FC (MAX) DAYLIGHT SENSOR. SEE SPEC

SECTION 26 09 23. CEILING -

OS6 12-24V X X 360 28 FT. SELF-ADJUSTING, CEILING MOUNT, HIGH BAY OCCUPANCY

SENSOR. SEE SPEC SECTION 26 09 23. CEILING 1

OS5 12-24V X X 360 28 FT. SELF-ADJUSTING, CEILING MOUNT OCCUPANCY SENSOR. SEE

SPEC SECTION 26 09 23. CEILING 1

OS4 12-24V X 360 12 FT. SELF-ADJUSTING, UL 924 LISTED, CEILING MOUNT

OCCUPANCY SENSOR. SEE SPEC SECTION 26 09 23. CEILING 1

OS3 12-24V X X 360 28 FT. SELF-ADJUSTING, CEILING MOUNT, HALLWAY OCCUPANCY

SENSOR. SEE SPEC SECTION 26 09 23. CEILING 1

OS2 12-24V X X 360 28 FT SELF-ADJUSTING, CEILING MOUNT OCCUPANCY SENSOR. SEE

SPEC SECTION 26 09 23. CEILING 1

OS1 12-24V X 360 12 FT. SELF-ADJUSTING, CEILING MOUNT OCCUPANCY SENSOR. SEE

SPEC SECTION 26 09 23. CEILING 1

OS 120/277 X 180 12 FT. SINGLE-POLE, WALL MOUNT SWITCH TYPE OCCUPANCY

SENSOR, MANUAL ON/AUTO OFF. SEE SPEC SECTION 26 09 23. SWITCH 2

PIR US

SENSOR

ID…