SOW - NY NJ - FY26 Upgrades to Contracting - Graphics Only_updated.pdf

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽ of � �

SCOPE OF WORK

FY 2026 Upgrade Graphics Only

GENERAL DESCRIPTION: The contractor shall provide all labor, material, equipment, and supervision to accomplish this FY 2026 Upgrade Graphics Only Request for the following locations and military services:

NORTH NEW JERSEY RECRUITING LOCATIONS:

0001 Marines 850 Van Houten Avenue Clifton NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Marine

0002 Marines 850 Van Houten Avenue Clifton NJ GHH INSTALL FACIA CHANNEL LETTER SIGN

(INCLUDING PHOTO CELL TIMER)

0003 Marines 560 Martin Luther King Boulevard

East Orange NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Marine and Joint Service front door

0004 Navy 560 Martin Luther King Boulevard

East Orange NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Navy SHIP on street side

0005 Navy 560 Martin Luther King Boulevard

East Orange NJ GHH INTERIOR SIGNAGE GRAPHICS - Navy

"Training" Vinyl Graphic

0006 Navy 560 Martin Luther King Boulevard

East Orange NJ GHH INTERIOR SIGNAGE GRAPHICS - Navy "Honor, Courage, Commitment" Vinyl Graphic

0007 Marines 561 Route 1 South Edison NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Marine on one side OF ENTRANCE

0008 Marines 15 BROAD STREET Elizabeth NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Marine

0009 Marines 31 SPARTA ROAD Newton NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Marine side back windows of office

0010 Marines 179 2 ROUTE 46 WEST Rockaway NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Marine full glass

0011 Marines 41 WEST MAIN STREET Somerville NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Marine full glass

0012 Navy 41 WEST MAIN STREET Somerville NJ GHH INTERIOR SIGNAGE GRAPHICS - NAVY

"Training" Vinyl Graphic

0013 Navy 41 WEST MAIN STREET Somerville NJ GHH REPLACE EXTERIOR PYLON CABINET SIGN(S)

(FACE ONLY)

0014 Navy 217 West Washington Ave

Washingto n NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Joint Service on door

NEW YORK RECRUITING LOCATIONS:

0015 Marines 517 W 181 STREET Manhattan NY SCJ INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Joint Service (Marine, Navy, Army)

0016 Marines 517 W 181 STREET Manhattan NY SCJ INTERIOR SIGNAGE GRAPHICS - Marines Eagle, Globe, & Anchor (EGA) Vinyl Graphic

0017 Marines 517 W 181 STREET Manhattan NY SCJ INTERIOR SIGNAGE GRAPHICS - Marines"

Wordmark Vinyl Graphic

0018 Marines 14 Spring Valley Market Place

Spring Valley NY GC INSTALL EXTERIOR WINDOW WRAP GRAPHICS

- Joint Service

0019 Navy 2455 Central Park Ave Yonkers NY GC Install Navy "Training" Vinyl Graphic

0020 Navy 2455 Central Park Ave Yonkers NY GC Install Navy "Honor, Courage, Commitment" Vinyl

Graphic

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page � of � �

A. A site inspection is recommended, but not a requirement.

B. Selected Contractor must complete this job no later than 120 Days after contract has been awarded.

C. Selected Contractor must complete this job during normal business hours (9am – 5pm) in the presence of an authorized military personnel. Under no circumstances will a contractor be given keys or access codes to the facility.

D. Selected Contractor must remove and dispose (from premises) all existing materials.

E. Graphic to cover entire window, FILE of Graphic will be shared, once Contractor is Selected.

F. Selected Contractor will contact and provide a work schedule before gaining access to the Installation.

• Giovanni Hassan Halak at 917-648-2308

• Shenelle Cummings-Johnson at 332-236-3122

• Gerard Cagayat at 917-790-8067

G. Selected Contractor will secure work site before, during and after work job.

H. Selected Contractor must clean up after completing the job.

I. Selected Contractor must have legal and authorized personnel to perform this job. However, no security clearance is required.

J. Selected Contractor must relocate furniture and other items, within the center of the office space, storage room and/ or testing room; however, storage and testing room should not be blocked from future access. Contractors are responsible for moving and replacing all furniture and equipment including the wall artwork back to their original location.

K. Upon request from the Army Corps of Engineers, Owners/Property Manager, the selected contractor must provide insurance bond. (AMOUNT TO BE DETERMINDED BY OWNER, IF REQUIRED OR REQUESTED) in the owner’s name.

L. Selected Contractor will contact (the POC) for full inspection after completion. Payments will not be released until the work is fully done and inspected.

• Giovanni Hassan Halak at 917-648-2308

• Shenelle Cummings-Johnson at 332-236-3122

• Gerard Cagayat at 917-790-8067

M. Selected Contractor must be aware that payment may not be received until 60 days after work is completed and inspected.

NORTH NEW JERSEY RECRUITING LOCATIONS:

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page � of � �

0001 MARINES 850 Van Houten Avenue CLIFTON NJ GHH INSTALL EXTERIOR WINDOW WRAP GRAPHICS - Marine

Graphic to cover entire window, FILE of Graphic will be shared, once Contractor is Selected.

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

8) JRFC Graphic (Collocated with shared entrance door for all Military Services).

Note: Only the COE representative will make the final decision on the approved graphics.

0002 MARINE

S

850 Van Houten Avenue

CLIFTON NJ GHH INSTALL FACIA CHANNEL LETTER SIGN

(INCLUDING PHOTO CELL TIMER)

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page � of � �

1. Exterior Signage: Lessor to confirm approved sign for use. Channel letter returns and raceway color to match building façade. If approved, the COE will provide an EPS file to the Lessor with appropriate sign design standards.

0003 MARINES 560 Martin Luther King Boulevard

EAST

ORANGE NJ GHH INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Joint Service front door

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page � of � �

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

Collocated with a Shared Entrance Door (JRFC Graphic): When multiple Military Services are present and they share the same entrance door, a “JRFC Graphic” will be installed. Perforated window wrap installations shall have 100% coverage of all exterior glass, including common area windows (if applicable). If Military Service “exclusive” windows on the sides or rear of the premises (not front windows) are present, individual Military Service graphics can be applied to those windows (coordinate with the COE Representative). The JRFC Graphic image shown below is provided for reference purposes ONLY. This image will be included in a PDF “Style Guide” that the contractor MUST download with detailed instructions. The image needs to be put together with specified materials and look as close to the image below as possible. In the Style Guide, the black lines represent window / door mullions. ALL perforated window wraps to incorporate into the overall graphic a “Weapons Prohibited” graphic (8.5” W x 11” H) centered vertically on the door directly next to the handle (see example and Box.com for the graphic file). The COE representative will provide a link and folder name for the contractor to download ALL appropriate files necessary (36 in total) to create / install the JRFC Graphic:

0004 NAVY 560 Martin Luther King Boulevard

EAST

ORANGE NJ GHH INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Navy SHIP on street side

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page , of � �

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

1) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

2) Window graphic film will have a visual obscurity density of 60 / 40.

3) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

4) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

5) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

6) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

7) JRFC Graphic (Collocated with shared entrance door for all Military Services).

0005 NAVY

560 Martin

Luther King Boulevard

EAST

ORANGE NJ GHH INTERIOR SIGNAGE GRAPHICS - Navy

"Training" Vinyl Graphic

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ; of � �

Installation will be scheduled after paint application has been completed, ACOE REP will advise.

Interior Signage: GS w/guidance: The CONTRACTOR shall order / install the Navy’s “Training Graphic” and “Honor, Courage, Commitment Graphic” below. Graphics to be centered vertically between the ceiling and chair rail and horizontally scaled to 65% - 70% of the length of the wall.

1. Each graphic is to be made as one-piece with the size of the graphic not to exceed 4’ H x 18’ L. COE representative to supply the Navy’s wall graphic files. CONTRACTOR will coordinate with the COE on the installation of these self-adhesive, vinyl graphics or where applicable, rough-surface applications.

Materials and instructions for installation are as follows:

2. Apply graphics to a flat smooth finish wall surface (after Navy paint is applied).

3. Allow paint a minimum of 7-10 days drying time before applying any wall graphics. Drying times will vary based on temperature and humidity.

4. Navy’s wall graphics shall be printed on and surface-applied to the self-adhesive vinyl.

5. Printed Vinyl: 3M 180CV3-10 opaque white vinyl, surface ink jet printed with the Navy’ graphics.

6. Surface laminated with 3M 8520 UV resistant matte clear overlay.

7. Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to

3M 180 Series, rated for high bond wall application,

8. And with minimum outdoor use 5-year warranty may be provided based on contractor recommendation.

Note 1: Wall mounted fixtures such as thermostats, wall switches, emergency lighting, and light sensors, etc., should be placed free and clear of all Military Service accents walls and graphics.

If selected, for expedited delivery-government pricing contact:

Manufacturer:

• Fast signs, Inc.

• POC: Chip Fullerton – General Manager.

• Phone: (901) 725-7446

• Email: 81@fastsigns.com

Model: 3M 180CV3-10 Opaque White Vinyl wall covering

• Substrate: Equal to 3M 180CV3-10 Opaque White Vinyl wall covering or better.

Installation: Utilize manufacturers’ recommended products in accordance with

1. 3M 180CV3-10 Opaque White Vinyl wall covering installation instructions and surface preparation and adhesive guidelines.

2. Clean the wall with a mixture of 70 percent isopropyl alcohol and 30 percent water.

3. Do these two times. Cleaning with this mixture will increase adhesion on Low VOC paints.

4. CONTRACTOR installed the graphics according to manufacturer’s instructions in order to maintain their warranty requirements.

0006 NAVY

560 Martin

Luther King Boulevard

EAST

ORANGE NJ GHH INTERIOR SIGNAGE GRAPHICS - Navy

"Honor, Courage, Commitment" Vinyl Graphic mailto:81@fastsigns.com

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page : of � �

Interior Signage: GS w/guidance: The CONTRACTOR shall order / install the Navy’s “Training Graphic” and “Honor, Courage, Commitment Graphic” below. Graphics to be centered vertically between the ceiling and chair rail and horizontally scaled to 65% - 70% of the length of the wall.

9. Each graphic is to be made as one-piece with the size of the graphic not to exceed 4’ H x 18’ L. COE representative to supply the Navy’s wall graphic files. CONTRACTOR will coordinate with the COE on the installation of these self-adhesive, vinyl graphics or where applicable, rough-surface applications.

Materials and instructions for installation are as follows:

10. Apply graphics to a flat smooth finish wall surface (after Navy paint is applied).

11. Allow paint a minimum of 7-10 days drying time before applying any wall graphics. Drying times will vary based on temperature and humidity.

12. Navy’s wall graphics shall be printed on and surface-applied to the self-adhesive vinyl.

13. Printed Vinyl: 3M 180CV3-10 opaque white vinyl, surface ink jet printed with the Navy’ graphics.

14. Surface laminated with 3M 8520 UV resistant matte clear overlay.

15. Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to

3M 180 Series, rated for high bond wall application,

16. And with minimum outdoor use 5-year warranty may be provided based on contractor recommendation.

Note 1: Wall mounted fixtures such as thermostats, wall switches, emergency lighting, and light sensors, etc., should be placed free and clear of all Military Service accents walls and graphics.

If selected, for expedited delivery-government pricing contact:

Manufacturer:

• Fast signs, Inc.

• POC: Chip Fullerton – General Manager.

Installation: Utilize manufacturers’ recommended products in accordance with

5. 3M 180CV3-10 Opaque White Vinyl wall covering installation instructions and surface preparation and adhesive guidelines.

6. Clean the wall with a mixture of 70 percent isopropyl alcohol and 30 percent water.

7. Do these two times. Cleaning with this mixture will increase adhesion on Low VOC paints.

8. CONTRACTOR installed the graphics according to manufacturer’s instructions in order to maintain their

0007 MARINES 561 Route 1 South EDISON NJ GHH

INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Marine on one side OF

ENTRANCE

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page . of � �

On Left side of front and 1 door, other side will be Managed by the Army

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

0008 MARINES 15 BROAD

STREET

ELIZABE

TH NJ GHH INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Marine

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽¿ of � �

Location may have had replacement Prior; Marines requested an inspection if needed or will be deleted.

Graphic to cover entire window, FILE of Graphic will be shared, once Contractor is Selected.

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

0009 MARINES 31 SPARTA

ROAD NEWTON NJ GHH

INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Marine side back windows of office

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽‽ of � �

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

0010 MARINES

179 2

ROUTE 46

WEST

ROCKAW

AY NJ GHH INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Marine full glass

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽� of � �

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

0011 MARINES

41 WEST

MAIN

STREET

SOMERVI

LLE NJ GHH INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Marine full glass

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽� of � �

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

0012 NAVY

MAIN

STREET

SOMERVI

LLE NJ GHH INTERIOR SIGNAGE GRAPHICS - NAVY

"Training" Vinyl Graphic

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽� of � �

Interior Signage: GS w/guidance: The CONTRACTOR shall order / install the Navy’s “Training Graphic” and “Honor, Courage, Commitment Graphic” below. Graphics to be centered vertically between the ceiling and chair rail and horizontally scaled to 65% - 70% of the length of the wall.

17. Each graphic is to be made as one-piece with the size of the graphic not to exceed 4’ H x 18’ L. COE representative to supply the Navy’s wall graphic files. CONTRACTOR will coordinate with the COE on the installation of these self-adhesive, vinyl graphics or where applicable, rough-surface applications.

Materials and instructions for installation are as follows:

18. Apply graphics to a flat smooth finish wall surface (after Navy paint is applied).

19. Allow paint a minimum of 7-10 days drying time before applying any wall graphics. Drying times will vary based on temperature and humidity.

20. Navy’s wall graphics shall be printed on and surface-applied to the self-adhesive vinyl.

21. Printed Vinyl: 3M 180CV3-10 opaque white vinyl, surface ink jet printed with the Navy’ graphics.

22. Surface laminated with 3M 8520 UV resistant matte clear overlay.

23. Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to

3M 180 Series, rated for high bond wall application,

24. And with minimum outdoor use 5-year warranty may be provided based on contractor recommendation.

Note 1: Wall mounted fixtures such as thermostats, wall switches, emergency lighting, and light sensors, etc., should be placed free and clear of all Military Service accents walls and graphics.

If selected, for expedited delivery-government pricing contact:

Manufacturer:

• Fast signs, Inc.

• POC: Chip Fullerton – General Manager.

Installation: Utilize manufacturers’ recommended products in accordance with

9. 3M 180CV3-10 Opaque White Vinyl wall covering installation instructions and surface preparation and adhesive guidelines.

10. Clean the wall with a mixture of 70 percent isopropyl alcohol and 30 percent water.

11. Do these two times. Cleaning with this mixture will increase adhesion on Low VOC paints.

12. CONTRACTOR installed the graphics according to manufacturer’s instructions in order to maintain their

0013 NAVY

MAIN

STREET

SOMERVILLE NJ GHH REPLACE EXTERIOR PYLON CABINET

SIGN(S) (FACE ONLY)

Signage:

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽� of � �

1. Exterior Signage: Lessor to confirm whether sign is approved for use. Letters and Eagle to have a raised bevel (s sign graphic for details), with returns and raceway color to match building façade. White letters, eagle / anchor to b semi-translucent. If approved, the COE will provide an EPS file to the Lessor with appropriate sign design standard

2. Individual Navy Stand-Alone Marquee / Pylon / Monument Signage: White eagle/anchor and letters to be sem translucent.

3.

0014 NAVY

217 West

Washington Ave

WASHIN

GTON NJ GHH INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Joint Service on door

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽, of � �

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic “Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See

Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

NEW YORK RECRUITING LOCATIONS:

0015 MARINES 517 W 181

STREET

MANHAT

TAN NY SCJ

INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Joint Service (Marine, Navy, Army)

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽; of � �

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is

Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic

“Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

1) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

2) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

3) Window graphic film will have a visual obscurity density of 60 / 40.

4) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

5) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

6) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

7) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

8) JRFC Graphic (Collocated with shared entrance door for all Military Services).

Note: Only the COE representative will make the final decision on the approved graphics.

Collocated with a Shared Entrance Door (JRFC Graphic): When multiple Military Services are present and they share the same entrance door, a “JRFC Graphic” will be installed. Perforated window wrap installations shall have 100% coverage of all exterior glass, including common area windows (if applicable). If Military Service “exclusive” windows on the sides or rear of the premises (not front windows) are present, individual Military Service graphics can be applied to those windows (coordinate with the COE Representative). The JRFC Graphic image shown below is provided for reference purposes ONLY. This image will be included in a PDF “Style Guide” that the contractor MUST download with detailed instructions. The image needs to be put together with specified materials and look as close to the image below as possible. In the Style Guide, the black lines represent window / door mullions. ALL perforated window wraps to incorporate into the overall graphic a “Weapons Prohibited” graphic (8.5” W x 11” H) centered vertically on the door directly next to the handle (see example and Box.com for the graphic file). The COE representative will provide a link and folder name for the contractor to download ALL appropriate files necessary (36 in total) to create / install the JRFC Graphic:

0016 MARINES 517 W 181

MANHAT

TAN NY SCJ INTERIOR SIGNAGE GRAPHICS - Marines

Eagle, Globe, & Anchor (EGA) Vinyl Graphic

“EGA” wall graphic is always placed on a RED WALL. It is surface-applied, self-adhesive vinyl, color to match PMS 4505c, matte finish, a dark yellow non-metallic color. Approved EGA Symbol Printed Vinyl: 3M 180CV3-10 opaque

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽: of � � white vinyl surface ink jet print to match PMS 4505c (dark yellow color) adjust as needed for accurate match to PMS 4505. Surface laminated with 3M 8520 UV resistant matte clear overlay.

Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to 3M 180 Series, rated for high bond wall application, and the minimum outdoor use 5-year warranty may be provided based on contractor recommendation.

Alternate EGA Symbol Color Vinyl Recommendation: Arlon 2100-3669 Olive, matt finish opaque vinyl.

It is to be scaled as large as possible with the top of the EGA high on the wall. Generally, the bottom is no more 3’-0” above the floor. If placed on a large wall where no fixtures or furniture will block it, the EGA should be made larger with the bottom closer to the floor.

Note 1: Red and blue walls require a minimum of four days (96 hours) for complete curing and drying time before application of vinyl wall graphics can occur. Paint drying time will be extended in cool or cold climates. Graphics contractor is to be advised of this requirement.

Note 2: Wall mounted fixtures such as thermostats, wall switches, emergency lighting, and light sensors, etc., should be placed free and clear of all Military Service accents walls.

0017 MARINES 517 W 181

MANHAT

TAN NY SCJ INTERIOR SIGNAGE GRAPHICS - Marines"

Wordmark Vinyl Graphic

“MARINES” wall graphic is always placed on a large BLUE WALL. It is surface-applied, self-adhesive vinyl, color to PANTONE 451C, matte finish, a dark beige non-metallic color. Approved MARINES Wordmark Printed Vinyl: 3M

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page ‽. of � �

180CV3-10 opaque white vinyl, surface ink jet print to match PMS 451c (dark beige color) adjust as needed for accurate match to PMS 451. Surface laminated with 3M 8520 UV resistant matte clear overlay.

Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to 3M 180 Series, rated for high bond wall application, and with minimum outdoor use 5-year warranty may be provided based on contractor recommendation. Alternate MARINES Wordmark Color Vinyl Recommendation: Arlon 2100-3670 Beige, matt finishes with opaque vinyl.

The “Marine’s” graphic is always placed midway between head height (6’-0”) and the ceiling. It should be scaled to 80% of the length of the wall (up to 1’-8” H letters) and centered. The proportions of the provided “MARINES” artwork shall not be changed.

Note 1: Where length of walls exceeds standards referenced above use Rule of Thumb: The letter height of the “MARINES” Wordmark should never grow so large that you cannot leave clear space above and below “MARINES” equal to the height of the letters, as measured from the workstation panels to the ceiling.

Note 2: Wall mounted fixtures such as thermostats, wall switches, light sensors, emergency lighting, etc., should be placed free and clear of all Military Service accents walls.

0018 MARINES 14 Spring Valley Market Place

SPRING

VALLEY

NY GC INSTALL EXTERIOR WINDOW WRAP

GRAPHICS - Joint Service

Graphic to cover entire window, FILE of Graphic will be shared, once Contractor is Selected.

Perforated Window Wraps: The Application of Perforated Window Wraps Is Dependent Upon the Type of Facility, Along with Other Requirements. Coe Representative / Military Service(S) Shall Have Control Over What Graphic Is

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page � ¿ of � �

Applied, What Position the Graphic Will Be Placed and On Which Windows. CONTRACTOR / Contractor Will Coordinate with The Coe Representative. All Perforated Window Wraps to Incorporate into The Overall Graphic

“Weapons Prohibited” Graphic (8.5” W X 11” H) Centered Vertically on The Door Directly Next to The Handle (See Below Example and Box.Com for The Graphic File).

The CONTRACTOR will provide all graphics examples and mockup elevations for COE approval, and when chosen, provide final proofs and storefront elevation renderings of the approved graphics.

9) The approved graphics (s) shall meet the following standard(s) or equivalent on all storefront windows wrap applications (including all manufacturer installation requirements MUST be followed, especially for temperatures, for the installation of all perforated exterior graphics):

10) 3M, 8170 – P40 (40% perforated), 4-mil, opaque, cast vinyl film with a high gloss finish.

11) Window graphic film will have a visual obscurity density of 60 / 40.

12) Apply 3M Scotchcal Optically Clear Gloss Overlaminate (8518) and shall be laminated prior to installation.

13) Apply 3M edge sealer tape 8914 at time of installation to all edges of the perforated film to prevent pealing.

14) The CONTRACTOR will coordinate with the Army Corps of Engineers (COE) representative regarding the correct graphic. The following are the types of graphics that might be installed at a location (as indicated in #1 and #2 BELOW), and in rare cases both could be installed.

15) Military Service Individual Graphics (Stand-alone OR Collocated with separate entrance doors).

16) JRFC Graphic (Collocated with shared entrance door for all Military Services).

Note: Only the COE representative will make the final decision on the approved graphics.

Collocated with a Shared Entrance Door (JRFC Graphic): When multiple Military Services are present and they share the same entrance door, a “JRFC Graphic” will be installed. Perforated window wrap installations shall have 100% coverage of all exterior glass, including common area windows (if applicable). If Military Service “exclusive” windows on the sides or rear of the premises (not front windows) are present, individual Military Service graphics can be applied to those windows (coordinate with the COE Representative). The JRFC Graphic image shown below is provided for reference purposes ONLY. This image will be included in a PDF “Style Guide” that the contractor MUST download with detailed instructions. The image needs to be put together with specified materials and look as close to the image below as possible. In the Style Guide, the black lines represent window / door mullions. ALL perforated window wraps to incorporate into the overall graphic a “Weapons Prohibited” graphic (8.5” W x 11” H) centered vertically on the door directly next to the handle (see example and Box.com for the graphic file). The COE representative will provide a link and folder name for the contractor to download ALL appropriate files necessary (36 in total) to create / install the JRFC Graphic:

0019 NAVY 2455 Central Park Ave YONKERS NY GC Install Navy "Training" Vinyl Graphic

Interior Signage: GS w/guidance: The CONTRACTOR shall order / install the Navy’s “Training Graphic” and

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page � ‽ of � �

“Honor, Courage, Commitment Graphic” below. Graphics to be centered vertically between the ceiling and chair rail and horizontally scaled to 65% - 70% of the length of the wall.

25. Each graphic is to be made as one-piece with the size of the graphic not to exceed 4’ H x 18’ L. COE representative to supply the Navy’s wall graphic files. CONTRACTOR will coordinate with the COE on the installation of these self-adhesive, vinyl graphics or where applicable, rough-surface applications.

Materials and instructions for installation are as follows:

26. Apply graphics to a flat smooth finish wall surface (after Navy paint is applied).

27. Allow paint a minimum of 7-10 days drying time before applying any wall graphics. Drying times will vary based on temperature and humidity.

28. Navy’s wall graphics shall be printed on and surface-applied to the self-adhesive vinyl.

29. Printed Vinyl: 3M 180CV3-10 opaque white vinyl, surface ink jet printed with the Navy’ graphics.

30. Surface laminated with 3M 8520 UV resistant matte clear overlay.

31. Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to

3M 180 Series, rated for high bond wall application,

32. And with minimum outdoor use 5-year warranty may be provided based on contractor recommendation.

Note 1: Wall mounted fixtures such as thermostats, wall switches, emergency lighting, and light sensors, etc., should be placed free and clear of all Military Service accents walls and graphics.

If selected, for expedited delivery-government pricing contact:

Manufacturer:

• Fast signs, Inc.

• POC: Chip Fullerton – General Manager.

Installation: Utilize manufacturers’ recommended products in accordance with

13. 3M 180CV3-10 Opaque White Vinyl wall covering installation instructions and surface preparation and adhesive guidelines.

14. Clean the wall with a mixture of 70 percent isopropyl alcohol and 30 percent water.

15. Do these two times. Cleaning with this mixture will increase adhesion on Low VOC paints.

16. CONTRACTOR installed the graphics according to manufacturer’s instructions in order to maintain their

0020 NAVY 2455 Central Park Ave YONKERS NY GC Install Navy "Honor, Courage, Commitment"

Vinyl Graphic

Interior Signage: GS w/guidance: The CONTRACTOR shall order / install the Navy’s “Training Graphic” and

SOW – NJ NY - FY26 UPGRADES - GRAPHICS ONLY Page � � of � �

“Honor, Courage, Commitment Graphic” below. Graphics to be centered vertically between the ceiling and chair rail and horizontally scaled to 65% - 70% of the length of the wall.

33. Each graphic is to be made as one-piece with the size of the graphic not to exceed 4’ H x 18’ L. COE representative to supply the Navy’s wall graphic files. CONTRACTOR will coordinate with the COE on the installation of these self-adhesive, vinyl graphics or where applicable, rough-surface applications.

Materials and instructions for installation are as follows:

34. Apply graphics to a flat smooth finish wall surface (after Navy paint is applied).

35. Allow paint a minimum of 7-10 days drying time before applying any wall graphics. Drying times will vary based on temperature and humidity.

36. Navy’s wall graphics shall be printed on and surface-applied to the self-adhesive vinyl.

37. Printed Vinyl: 3M 180CV3-10 opaque white vinyl, surface ink jet printed with the Navy’ graphics.

38. Surface laminated with 3M 8520 UV resistant matte clear overlay.

39. Alternate manufacturers (e.g., Arlon, Avery, GSP, OraCal, LG or other) sign vinyl materials equivalent to

3M 180 Series, rated for high bond wall application,

40. And with minimum outdoor use 5-year warranty may be provided based on contractor recommendation.

Note 1: Wall mounted fixtures such as thermostats, wall switches, emergency lighting, and light sensors, etc., should be placed free and clear of all Military Service accents walls and graphics.

If selected, for expedited delivery-government pricing contact:

Manufacturer:

• Fast signs, Inc.

• POC: Chip Fullerton – General Manager.

Installation: Utilize manufacturers’ recommended products in accordance with

17. 3M 180CV3-10 Opaque White Vinyl wall covering installation instructions and surface preparation and adhesive guidelines.

18. Clean the wall with a mixture of 70 percent isopropyl alcohol and 30 percent water.

19. Do these two times. Cleaning with this mixture will increase adhesion on Low VOC paints.

20. CONTRACTOR installed the graphics according to manufacturer’s instructions in order to maintain their

Signage: