KE1-09-0509 Electrical REPOSTED

AD-A-9

SUMP, SEE E101 AND MECHANICAL SHEETS

E

H

H

E H

H -19

C

H

H

E H

H -18

C

H

H

E

H

H

C

H

H

C H

H -18

C H

H -19

KEYED NOTES

1 SEE E-101 FOR SUMP PUMP DETAILS.

2 PROVIDE SEPARATE COMMUNICATION AND POWER HAND

HOLES (TYPICAL FOR ALL SHOWN). SEE SHEET ES501 FOR

HAND HOLE AND DUCTBANK DETAILS.

3. SEE SHEET E-101 FOR CONDUCTOR SIZES AND QUANTITY.

SEE ES-501 FOR SM FOC COUNT.

1. ALL INSTRUMENTATION LOCATIONS ARE APPROXIMATE AND FOR

REFERENCE ONLY. SEE BI-101 FOR EXACT LOCATIONS.

2. CONTRACTOR RESPONSIBLE FOR COORDINATION WITH

INSTRUMENTATION INSTALLERS. SEE DRAWINGS BI501 AND BI601 FOR

INSTRUMENTATION PAD DETAILS AND INSTALLATION REQUIREMENTS.

3. DUCTBANKS ON THE DAM CREST SHALL BE INSTALLED IN THE ZONE 5

ROAD BASE EMBANKMENT ZONE

4. FINAL LOCATION OF DUCT BANKS TO BE APPROVED BY CONTRACTING

OFFICER.

ES001 ES501

B

ES001 ES501

A

ES001 ES501

B

ES001 ES501

A

ES001 ES501

B

ES001 ES501

B

ES001 ES501

A

ES001 ES501

A

ES001 ES501

A

ES001 ES501

A

ES001 ES501

A

ES001 ES501

A

ES001 ES501

A

ES001 ES501

B

NOTES

1. EXISTING CONDITIONS IN AUXILIARY DAM CONTROL TOWER ARE AS ORIGINALLY INSTALLED.

2. REMOVE ALL ELECTRICAL SYSTEMS BACK TO MAIN TRANSFORMER UNLESS OTHERWISE NOTED. SEE MD-101 THRU MD107 FOR ALL MECHANICAL EQUIPMENT TO BE DISCONNECTED AND REMOVED.

3. SEE MD-101 FOR GENERATOR AND ATS REMOVAL.

NOTES

1. SEE M-109 AND M-602 FOR MECHANICAL DRAWINGS.

2. SEE C-204 FOR CIVIL SITE DRAWINGS.

3. CONTRACTOR TO COORDINATE WITH SCE FOR RISER POLE

LOCATION AND TERMINATION.

4. SEE ES001 FOR ACCELEGRAPHS LOCATIONS TO BE FED FROM

PANEL "LS".