PAN 050678 050778 W911SD-26-Q-A114 SOLICITATION AMEND 0006 DRAFT India White Coats and Trouser.pdf
PDF 4 MB Posted
- Solicitation number
- W911SD-26-Q-A114
About this file
Amendment 0006 to Solicitation W911SD26QA114
This document is Amendment 0006 to solicitation W911SD26QA114, effective October 14, 2026, issued by the U.S. Army Mission and Installation Contracting Command – West Point (MICC-West Point). The amendment incorporates RFI Batch #5 and #6 Questions and Answers and updates the Pass/Fail criteria to reflect the number of Major and Minor allowances. This is a Firm Fixed Price Indefinite Delivery Indefinite Quantity (IDIQ) contract for Men's and Women's India White Coats, Trousers, and Women's Skirts, with an ordering period from November 1, 2026, through October 31, 2033 (seven years). Offerors must submit one pre-award sample of each garment type in accordance with detailed specifications and pass/fail evaluation criteria based on defect classification tables. The Government will furnish fabric and all accessories for sample production during the base year only; contractors must source materials for subsequent years.
The evaluation is a lowest price source selection conducted under FAR 12.203(a)(1), with award to one contractor whose quote conforms to minimum specifications and offers the lowest price. Technical evaluation is pass/fail based on sample conformance to specifications and defect allowances (one Major defect or three Minor defects results in sample rejection). Pre-award samples must be received by November 16, 2026, at 2:00 p.m. Eastern Standard Time at U.S. Army Mission and Installation Contracting Command – West Point, Attn: Ignacio Cordova, 681 Rogers Place, Room 100, West Point, NY 10996-1514. Key sample requirements specify particular sizes for each garment (Men's Coat 40-S, Women's Coat 8-R, Men's Trouser 41-31, Women's Trouser 44-S, Skirt 29-XS), with government-provided cut fabric due by October 5, 2026. Samples must include buttonholes and eyelets but not buttons. The contracting officer is Ignacio Cordova (ignacio.j.cordova2.civ@army.mil, 520-687-8204).
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DRAFT11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS
The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.
Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:
(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;
or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER.
If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.
12. ACCOUNTING AND APPROPRIATION DATA (If required)
13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.
IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.
CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER
NUMBER IN ITEM 10A.
B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).
C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:
D. OTHER (Specify type of modification and authority)
E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.
14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)
Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.
15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)
15B. CONTRACTOR/OFFEROR
(Signature of person authorized to sign)
15C. DATE SIGNED 16B. UNITED STATES OF AMERICA
(Signature of Contracting Officer)
16C. DATE SIGNED
Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243
AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES
2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)
6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE
8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER
9B. DATED (SEE ITEM 11)
10A. MODIFICATION OF CONTRACT/ORDER NUMBER
10B. DATED (SEE ITEM 13)
CODE FACILITY CODE
SECTION SF 30 BLOCK 14 CONTINUATION PAGE
SUMMARY OF CHANGES
List of Attachments
Miscellaneous text in this section has been modified from:
RFIs Questions and Answers / CERTIFICATIONS & REPRESENTATIONS
RFI BATCH #1 Questions and Answers
**Solicitation Draft Status
The primary solicitation document is identified as "SOLICITATION DRAFT." Please confirm whether the currently posted document is the final solicitation package for purposes of quotation and sample submission, or whether a revised/final version will be issued.
- Answer: Finalize document of the solicitation can be found on SAM.gov
**Ordering Period
Several portions of the solicitation identify the ordering period as November 1, 2026 through October 31, 2033, including seven ordering years. However, Narrative 2 identifies the ordering period as November 1, 2026 through October 31, 2032.
Please confirm the correct final ordering period.
- Answer: Will issue amendment and revise to October 31, 2033
**CLIN 0003 - Women's Garment Description/Specification
CLIN 0003 references WPPD2113 but describes the item as the Women's India White Coat. The attached WPPD2113 document appears to be the Women's India White Dress Trouser specification.
Please confirm the correct item and specification applicable to CLIN 0003.
- Answer: Will issue amendment revise to TROUSER, DRESS INDIA WHITE, WOMENS
**CLIN 0004 - Women's Garment Description/Specification
W911SD26QA1140006
CLIN 0004 references WPPD2601 but describes the item as Women's India White Trousers. The attached WPPD2601 document appears to be the Women's India White Coat specification.
Please confirm the correct item and specification applicable to CLIN 0004.
- Answer: Will issue amendment and revise to COAT, INDIA WHITE, WOMEN'S
**CLIN 0005 - Women's Skirt
CLIN 0005 also identifies WPPD2601 and describes Women's India White Trousers, which appears to duplicate another women's garment CLIN. Because the requirement and attachments include a separate specification for the Women's India White Skirt, please confirm whether CLIN 0005 is intended to be the Women's India White Skirt and identify the correct applicable purchase description.
- Answer: Will issue amendment and revise to SKIRT, INDIA WHITE
**Contract Minimum/Maximum Quantities and Values
The Contract Minimum/Maximum Quantity and Contract Value table contains "$TBD" and/or blank fields for the minimum and maximum quantities and dollar values. The individual CLIN minimum /maximum table also contains blank or TBD values.
Please advise whether these values will be provided through an amendment prior to the quotation deadline.
- Answer: At this time the information is up to date, upon contract award it will be updated.
**CLIN 0006
The solicitation identifies the requirement as CLINs 0001 through 0005, but the CLIN Delivery /Task Order Minimum/Maximum table also contains a row for CLIN 0006.
Please confirm whether CLIN 0006 is applicable to this requirement or should be disregarded.
- Answer: CLIN 0006 is an error, and has been deleted
**Sample Submission Solicitation Number
One portion of the sample-submission instructions directs offerors to identify the shipment as:
"RE: W911SD-26-Q-A078 Men's and Women's India White Coats, Trousers, and Women's Skirts."
A later section identifies the requirement as W911SD-26-Q-A114.
Please confirm that W911SD-26-Q-A114 is the correct solicitation number that should appear on all sample shipments and correspondence.
- Answer: Corrected to W911SD-26-Q-A114
Sample Men's and Women's India White Coats, Trousers, and Women's Skirts shall be submitted on or before the closing date and time identified in block 8 of the SF1449 to the following address:
U.S. Army Mission and Installation Contracting Command - West Point
Attn: Ignacio Cordova
681 Rogers Place, Room 100
West Point, NY 10996-1514
RE: W911SD-26-Q-A114 Men's and Women's India White Coats, Trousers, and Women's Skirts
**Government-Provided Pre-Cut Sample Fabric
The solicitation states that the Government will provide pre-cut fabric for the required pre-award sample garments and establishes October 7, 2026 at 4:30 p.m. as the deadline for sample fabric requests.
Please confirm the procedure for requesting the sample fabric kits, including:
Information that should be included with the request;
Whether one complete kit will include material for each required Men's and Women's Coat, Trouser, and Women's Skirt sample;
How and when the kits will be shipped to interested offerors; and
Whether any additional Government-furnished components or materials will accompany the pre-cut fabric.
Because completed samples must be manufactured and submitted prior to the solicitation closing date, this information will assist us in determining whether sufficient production time remains to participate.
We appreciate your assistance in clarifying these items. Harvest Government Solutions is interested in the requirement and would like to ensure that we are working from the correct specifications, quantities, contract period, and sample instructions before requesting manufacturing pricing.
- Answer: Per AMEND 0001
**For Government furnished fabric to create SAMPLES, please reference
i. PWS located in the solicitation
ii. The specifications packages uploaded into SAM.gov for each garment
The deadline for all SAMPLE FABRIC requests is 5th October 2026, 1630 (4:30pm). All questions and concerns regarding this solicitation shall be submitted in writing via email to: ignacio.j.
cordova2.civ@army.mil
Offerors must provide a written request along with a PRE PAID self-addressed shipping label for the sample materials and accessories to produce and submit one (1) of each sample Men's and Women's India White Coats, Trousers, and Women's Skirts for the government's determination to ensure the offeror's sample Men's and Women's India White Coats, Trousers, and Women's Skirts quote conforms to the solicitation's minimum requirements (specifications).
The government will collect all PRE-PAID self-addressed shipping labels, pack, and ship to all requestors on October 8th, 2026, via the PRE PAID Label couriers. NO SAMPLE requests will be accepted after October 5th, 2026___________________ Vendor Acknowledge.
The government shall only provide fabric to produce the Men's and Women's India White Coats, Trousers, and Women's Skirts during the base year. It is the offeror's responsibility to source the India White Fabric and produce the Men's and Women's India White Coats, Trousers, and Women's Skirts throughout the remaining years
Interested offerors-in order to be considered; must submit one SAMPLE Men's and Women's India White Coats, Trousers, and Women's Skirts in accordance with the specifications before the due date noted in Box #8 of the solicitation.
RFI BATCH #2 Questions and Answers
-Quantities: Amendment 0002 updated quantities in Section B, but Section F reflects original figures. Please confirm which quantities to use for pricing.
ANSWER: Will issue an amendment as this is a Contract Writing System error, thank you for bringing to our attention...
-Requested that we be sent the cut material to produce samples for this Bid, in your addendum it requests we accompany this with a paid shipping label, can you let us know the box dimensions and weight and will send you a shipping label? Are you sending 1 pant and 1 coat in both men's and women's?
Let me know so I can gauge weight too
ANSWER: Recommend Large Box, One of each sample material and accessories for of each garment Noted in the Specs.
It is the offeror's responsibility to determine package specifics
-We see the ordering period listed as November 1, 2026 through October 31, 2033. Can you please confirm that the anticipated contract term is seven years?
ANSWER: the requirement is for an IDIQ, the term is November 1, 2026 through October 31, 2033
-The solicitation lists estimated quantities for each of the different India White items. Are these quantities the Government's total estimated requirements over the full contract period, or are they estimated annual quantities?
ANSWER: Estimated requirements are over the full contract period
-Will there be a minimum quantity per individual delivery order for each item?
ANSWER: It is the offerors responsibility to review the terms, conditions, and specifications for item qty and sizes.
-We have a question: As this is for a 5-year Contract, do you have any information regarding an Economic Price Adjustment or what the Offeror is expected to provide for pricing over the five years? Could we expect an amendment to be issued addressing this matter?
ANSWER: the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions- Refer to 252.243-7002 Requests for Equitable A djustment located in the solicitation
-Does each CLIN take a single unit price that applies across the entire ordering period (November 2026 through October 2033), or will unit pricing be established separately for each program year?
ANSWER: the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions- Refer to 252.243-7002 Requests for Equitable Adjustment located in the solicitation
-Fabric is government-furnished in the base year and contractor-furnished in the out years. Is any economic price adjustment mechanism contemplated for the out years, or should offerors price all years as firm-fixed with no adjustment?
ANSWER: The government shall only provide fabric to produce the Men's and Women's India White Coats, Trousers, and Women's Skirts during the INITIAL year. It is the offeror's responsibility to source the India White Fabric and produce the Men's and Women's India White Coats, Trousers, and Women's Skirts during the remaining years of the contract. the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions- Refer to 252.243-7002 Requests for Equitable Adjustment located in the solicitation
-Shipping label: Should we use the 681 Hardee Place address and your phone number listed in the solicitation as the ship-from information? What are the approximate weight and dimensions of the package or packages?
ANSWER: Sample Men's and Women's India White Coats, Trousers, and Women's Skirts shall be submitted on or before the closing date and time identified in block 8 of the SF1449 to the following address:
U.S. Army Mission and Installation Contracting Command - West Point Attn: Ignacio Cordova 681 Rogers Place, Room 100 West Point, NY 10996-1514 RE: W911SD-26-Q-A078 Men's and Women's India White Coats, Trousers, and Women's Skirts
Recommend Large Box, One of each sample material and accessories for of each garment Noted in the Specs. It is the offeror's responsibility to determine package specifics.
RFI BATCH # 3 Questions and Answers
Since each garment has a broad range of sizes and lengths, does the Government have a forecast or historical breakdown of the anticipated quantities by size that could be provided for planning and pricing purposes?
ANSWER: Yes
Sample kit contents: Amendment 0002 refers to "sample materials and accessories." In addition to the pre-cut shell fabric, will the kits include the applicable lining, interfacing and waistband materials, USMA buttons and toggles, hook-and-eye components, zippers, pocket supports, and CUF identification and size/barcode labels? Please let us know which of these, if any, our manufacturing partner will need to source separately for the pre-award samples.
ANSWER: Yes all accessories needed for each garment will be included along with PD
Sample sizes: Which size and length will the Government's pre-cut kit provide for each of the five garments? We want to use the corresponding measurement tables when assembling and checking the samples.
ANSWER: Sample and cut sample sent will be the same size
Patterns/Gerber files: Will the applicable patterns or Gerber files be provided or available to us for construction of the samples? Having access to the patterns during construction would be helpful for our manufacturing partner. If they are available separately, please let us know how we can obtain them.
ANSWER: Not at this time. We are sending cut work
Base fabric specification: For the base poly/cotton twill fabric, can you please confirm if WP-PD-21- 01 dated April 22, 2022 is the most current PD? We want to make sure we are working from the most current specification as we plan for the fabric.
ANSWER: Yes
Size mix for pricing: Amendment 0002 says the size mix will be specified in individual delivery orders. Is a historical size mix or planning estimate by size available to help offerors price the garments?
ANSWER: No
Packaging: The PDs state to follow CUF storage practices. Could you clarify whether garments should be shipped on hangers or folded, and if specific polybags or cartons are required?
ANSWER: Folded in a plastic bag or plastic lined box
Government Furnished Material: Will the Government handle freight/shipping of the fabric to our facility, or should we include pickup/freight costs in our pricing?
ANSWER: Government will handle shipping
Delivery Requirements: Are there specific receiving hours, appointment requirements, or pallet dimensions for deliveries to Bldg 913?
ANSWER: All SAMPLES must be shipped as instructed in the solicitation. For contract deliverables, that will be reviewed at a later date.
Could you please provide the Government pattern files for all garments required under the solicitation: Men's India White Coat, Men's India White Trouser, Women's India White Coat, Women's India White Trouser, and Women's India White Skirt?
ANSWER: Not until awarded
If available, we would appreciate the digital patterns in DXF/AAMA, ASTM, Gerber AccuMark, or the Government's available digital format, along with any grading information or pattern instructions applicable to the pre-award samples.
ANSWER: We use Gerber / Accumark
Could you also please provide the latest/final Purchase Descriptions (PDs) applicable to each of the five India White garments, including any revised PDs incorporated through the most recent solicitation amendments? We want to ensure that our patterns and pre-award samples are developed to the current requirements.
ANSWER: We are sening our latest PD's
The pattern files and current PDs will help us prepare the samples in accordance with the specifications and accurately determine fabric consumption and production requirements.
ANSWER: : Not until awarded
RFI BATCH # 4 Questions and Answers
Would you please provide Purchase Description WP-PD-21-01, Cloth, Twill, Polyester/Cotton, White (Local Stock Number C0053)? The garment PDs reference this document as being available through the contracting activity. Having it would help us obtain accurate mill quotes and develop pricing for the years following the initial GFM year.
Answer: This is not part of this solicitation
Does the Government have an estimated quantity for each CLIN that it anticipates ordering during the initial GFM year?
Answer: Yes, approx. #
For future delivery orders, should we anticipate the full quantity being delivered at one time, or are orders generally delivered in scheduled partial quantities, such as monthly or every other month?
Is there an anticipated minimum lot size?
Answer: usually delivered altogether
RFI Batch 2 indicates that DFARS 252.211-7003 applies. Could you please confirm whether IUID marking is required on each individual garment? If so, could you also provide the preferred marking method and location?
Answer: follow as per PD
Could you please provide the warehouse receiving hours and let us know whether a delivery appointment is required?
Answer: 7: 00 to 4:30 no appointment is needed
Are there specific packing requirements we should account for in our pricing, such as individual bagging, cartons, labels, or palletization?
Answer: all items get packed in boxes
For the required samples, should the specified buttons and toggles be installed, or may the samples be submitted with the required buttonholes and eyelets only?
Answer: No buttons are needed for the sample upon return. Just buttonholes and eyelets
For production orders, should the coats and trousers be delivered with the buttons installed or without buttons?
Answer: Without
We see the applicable button and toggle types listed in the PDs, but we were unable to locate the quantity required per garment. Could you please confirm the quantities for the following?
Answer:
Coat: B0050 (36 ligne), B0031 (25 ligne), and A0050 toggle
Trousers: B0156 and A0050 toggle
Coat: B0050 (36 ligne), 8 each B0031 (25 ligne), 4 each and A0050 toggle 10 each male or female
Trouser: B0156 and A0050 toggle 1 each male or female
Could you please clarify the basis for award? Section M references lowest price, while FAR 52.212- 2 indicates that non-price factors are more important than price. We just want to make sure we understand how the Government intends to evaluate the offers.
Answer: all of the above
FAR 52.209-3 currently shows portions of the first article requirements as TBD. When available, could you please provide the first article quantity, delivery requirements, submission location, and approval timeline?
Answer: Should be sometime mid 2027
Could you please confirm the size of each sample included in the Government sample kits?
Answer: Skirt 29XS, Men's Wt. Coat -40-S, Women's Wt. Ct-8-R, Men's Wt. Trouser - 41-31 Women's Wt. Trouser - 44-S
Will there be an opportunity for offerors to view or inspect the CUF standard samples prior to submitting their samples?
Answer: No
Could you please provide the applicable finished-garment measurement tolerances for the coats?
We reviewed Table II of WP-PD-21-11 and WP-PD-26-01 but were unable to locate the tolerances.
Answer: Should be in the PD
The specified Stickery hook-and-eye tapes appear to be discontinued. For the years following the initial year, would an equivalent product meeting the required dimensions and performance requirements be acceptable?
Answer: Please adhere to specifications. In the event the item is discontinued in the future out years, the government will make a determination at the time of the out years.
Could you please clarify the required eyelet location on the Women's Trouser? We noticed that paragraphs 3.8.1.6.2 and 3.8.3.1 of WP-PD-21-13 appear to provide different requirements.
Answer: PD should be correct
For the Skirt, could you please confirm whether V0003 is the governing purchase description and which zipper Local Stock Number should be used, Z0192 or Z0149?
Answer: Z0192
CERTIFICATIONS & REPRESENTATIONS
-Delivery-order minimums: Amendment 0002 says the CLIN minimum/maximum table will be updated upon award. Should offerors price on the assumption that there is no stated minimum quantity per CLIN on an individual delivery order, or will those minimums be established before quotes are due?
ANSWER: the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions
-IUID Marking: Section B references DFARS 252.211-7003. Is IUID marking required on these garments?
ANSWER: *DFARS 252.225-7012 Preference for Certain Domestic Commodities _______________________ Vendor Acknowledge*
NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification, or a recognized DoD unique identification equivalent.
To:
RFIs Questions and Answers / CERTIFICATIONS & REPRESENTATIONS
RFI BATCH #1 Questions and Answers
**Solicitation Draft Status
The primary solicitation document is identified as "SOLICITATION DRAFT." Please confirm whether the currently posted document is the final solicitation package for purposes of quotation and sample submission, or whether a revised/final version will be issued.
- Answer: Finalize document of the solicitation can be found on SAM.gov
**Ordering Period
Several portions of the solicitation identify the ordering period as November 1, 2026 through October 31, 2033, including seven ordering years. However, Narrative 2 identifies the ordering period as November 1, 2026 through October 31, 2032.
Please confirm the correct final ordering period.
- Answer: Will issue amendment and revise to October 31, 2033
**CLIN 0003 - Women's Garment Description/Specification
CLIN 0003 references WPPD2113 but describes the item as the Women's India White Coat. The attached WPPD2113 document appears to be the Women's India White Dress Trouser specification.
Please confirm the correct item and specification applicable to CLIN 0003.
- Answer: Will issue amendment revise to TROUSER, DRESS INDIA WHITE, WOMENS
**CLIN 0004 - Women's Garment Description/Specification
CLIN 0004 references WPPD2601 but describes the item as Women's India White Trousers. The attached WPPD2601 document appears to be the Women's India White Coat specification.
Please confirm the correct item and specification applicable to CLIN 0004.
- Answer: Will issue amendment and revise to COAT, INDIA WHITE, WOMEN'S
**CLIN 0005 - Women's Skirt
CLIN 0005 also identifies WPPD2601 and describes Women's India White Trousers, which appears to duplicate another women's garment CLIN. Because the requirement and attachments include a separate specification for the Women's India White Skirt, please confirm whether CLIN 0005 is intended to be the Women's India White Skirt and identify the correct applicable purchase description.
- Answer: Will issue amendment and revise to SKIRT, INDIA WHITE
**Contract Minimum/Maximum Quantities and Values
The Contract Minimum/Maximum Quantity and Contract Value table contains "$TBD" and/or blank fields for the minimum and maximum quantities and dollar values. The individual CLIN minimum /maximum table also contains blank or TBD values.
Please advise whether these values will be provided through an amendment prior to the quotation deadline.
- Answer: At this time the information is up to date, upon contract award it will be updated.
**CLIN 0006
The solicitation identifies the requirement as CLINs 0001 through 0005, but the CLIN Delivery /Task Order Minimum/Maximum table also contains a row for CLIN 0006.
Please confirm whether CLIN 0006 is applicable to this requirement or should be disregarded.
- Answer: CLIN 0006 is an error, and has been deleted
**Sample Submission Solicitation Number
One portion of the sample-submission instructions directs offerors to identify the shipment as:
"RE: W911SD-26-Q-A078 Men's and Women's India White Coats, Trousers, and Women's Skirts."
A later section identifies the requirement as W911SD-26-Q-A114.
Please confirm that W911SD-26-Q-A114 is the correct solicitation number that should appear on all sample shipments and correspondence.
- Answer: Corrected to W911SD-26-Q-A114
Sample Men's and Women's India White Coats, Trousers, and Women's Skirts shall be submitted on or before the closing date and time identified in block 8 of the SF1449 to the following address:
U.S. Army Mission and Installation Contracting Command - West Point
Attn: Ignacio Cordova
681 Rogers Place, Room 100
West Point, NY 10996-1514
RE: W911SD-26-Q-A114 Men's and Women's India White Coats, Trousers, and Women's Skirts
**Government-Provided Pre-Cut Sample Fabric
The solicitation states that the Government will provide pre-cut fabric for the required pre-award sample garments and establishes October 7, 2026 at 4:30 p.m. as the deadline for sample fabric requests.
Please confirm the procedure for requesting the sample fabric kits, including:
Information that should be included with the request;
Whether one complete kit will include material for each required Men's and Women's Coat, Trouser, and Women's Skirt sample;
How and when the kits will be shipped to interested offerors; and
Whether any additional Government-furnished components or materials will accompany the pre-cut fabric.
Because completed samples must be manufactured and submitted prior to the solicitation closing date, this information will assist us in determining whether sufficient production time remains to participate.
We appreciate your assistance in clarifying these items. Harvest Government Solutions is interested in the requirement and would like to ensure that we are working from the correct specifications, quantities, contract period, and sample instructions before requesting manufacturing pricing.
- Answer: Per AMEND 0001
**For Government furnished fabric to create SAMPLES, please reference
i. PWS located in the solicitation
ii. The specifications packages uploaded into SAM.gov for each garment
The deadline for all SAMPLE FABRIC requests is 5th October 2026, 1630 (4:30pm). All questions and concerns regarding this solicitation shall be submitted in writing via email to: ignacio.j.
cordova2.civ@army.mil
Offerors must provide a written request along with a PRE PAID self-addressed shipping label for the sample materials and accessories to produce and submit one (1) of each sample Men's and Women's India White Coats, Trousers, and Women's Skirts for the government's determination to ensure the offeror's sample Men's and Women's India White Coats, Trousers, and Women's Skirts quote conforms to the solicitation's minimum requirements (specifications).
The government will collect all PRE-PAID self-addressed shipping labels, pack, and ship to all requestors on October 8th, 2026, via the PRE PAID Label couriers. NO SAMPLE requests will be accepted after October 5th, 2026___________________ Vendor Acknowledge.
The government shall only provide fabric to produce the Men's and Women's India White Coats, Trousers, and Women's Skirts during the base year. It is the offeror's responsibility to source the India White Fabric and produce the Men's and Women's India White Coats, Trousers, and Women's Skirts throughout the remaining years
Interested offerors-in order to be considered; must submit one SAMPLE Men's and Women's India White Coats, Trousers, and Women's Skirts in accordance with the specifications before the due date noted in Box #8 of the solicitation.
RFI BATCH #2 Questions and Answers
-Quantities: Amendment 0002 updated quantities in Section B, but Section F reflects original figures. Please confirm which quantities to use for pricing.
ANSWER: Will issue an amendment as this is a Contract Writing System error, thank you for bringing to our attention...
-Requested that we be sent the cut material to produce samples for this Bid, in your addendum it requests we accompany this with a paid shipping label, can you let us know the box dimensions and weight and will send you a shipping label? Are you sending 1 pant and 1 coat in both men's and women's?
Let me know so I can gauge weight too
ANSWER: Recommend Large Box, One of each sample material and accessories for of each garment Noted in the Specs.
It is the offeror's responsibility to determine package specifics
-We see the ordering period listed as November 1, 2026 through October 31, 2033. Can you please confirm that the anticipated contract term is seven years?
ANSWER: the requirement is for an IDIQ, the term is November 1, 2026 through October 31, 2033
-The solicitation lists estimated quantities for each of the different India White items. Are these quantities the Government's total estimated requirements over the full contract period, or are they estimated annual quantities?
ANSWER: Estimated requirements are over the full contract period
-Will there be a minimum quantity per individual delivery order for each item?
ANSWER: It is the offerors responsibility to review the terms, conditions, and specifications for item qty and sizes.
-We have a question: As this is for a 5-year Contract, do you have any information regarding an Economic Price Adjustment or what the Offeror is expected to provide for pricing over the five years? Could we expect an amendment to be issued addressing this matter?
ANSWER: the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions- Refer to 252.243-7002 Requests for Equitable A djustment located in the solicitation
-Does each CLIN take a single unit price that applies across the entire ordering period (November 2026 through October 2033), or will unit pricing be established separately for each program year?
ANSWER: the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions- Refer to 252.243-7002 Requests for Equitable Adjustment located in the solicitation
-Fabric is government-furnished in the base year and contractor-furnished in the out years. Is any economic price adjustment mechanism contemplated for the out years, or should offerors price all years as firm-fixed with no adjustment?
ANSWER: The government shall only provide fabric to produce the Men's and Women's India White Coats, Trousers, and Women's Skirts during the INITIAL year. It is the offeror's responsibility to source the India White Fabric and produce the Men's and Women's India White Coats, Trousers, and Women's Skirts during the remaining years of the contract. the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions- Refer to 252.243-7002 Requests for Equitable Adjustment located in the solicitation
-Shipping label: Should we use the 681 Hardee Place address and your phone number listed in the solicitation as the ship-from information? What are the approximate weight and dimensions of the package or packages?
ANSWER: Sample Men's and Women's India White Coats, Trousers, and Women's Skirts shall be submitted on or before the closing date and time identified in block 8 of the SF1449 to the following address:
U.S. Army Mission and Installation Contracting Command - West Point
Attn: Ignacio Cordova 681 Rogers Place, Room 100 West Point, NY 10996-1514 RE: W911SD-26-Q-A078 Men's and Women's India White Coats, Trousers, and Women's Skirts
Recommend Large Box, One of each sample material and accessories for of each garment Noted in the Specs. It is the offeror's responsibility to determine package specifics.
RFI BATCH # 3 Questions and Answers
Since each garment has a broad range of sizes and lengths, does the Government have a forecast or historical breakdown of the anticipated quantities by size that could be provided for planning and pricing purposes?
ANSWER: Yes
Sample kit contents: Amendment 0002 refers to "sample materials and accessories." In addition to the pre-cut shell fabric, will the kits include the applicable lining, interfacing and waistband materials, USMA buttons and toggles, hook-and-eye components, zippers, pocket supports, and CUF identification and size/barcode labels? Please let us know which of these, if any, our manufacturing partner will need to source separately for the pre-award samples.
ANSWER: Yes all accessories needed for each garment will be included along with PD
Sample sizes: Which size and length will the Government's pre-cut kit provide for each of the five garments? We want to use the corresponding measurement tables when assembling and checking the samples.
ANSWER: Sample and cut sample sent will be the same size
Patterns/Gerber files: Will the applicable patterns or Gerber files be provided or available to us for construction of the samples? Having access to the patterns during construction would be helpful for our manufacturing partner. If they are available separately, please let us know how we can obtain them.
ANSWER: Not at this time. We are sending cut work
Base fabric specification: For the base poly/cotton twill fabric, can you please confirm if WP-PD-21- 01 dated April 22, 2022 is the most current PD? We want to make sure we are working from the most current specification as we plan for the fabric.
ANSWER: Yes
Size mix for pricing: Amendment 0002 says the size mix will be specified in individual delivery orders. Is a historical size mix or planning estimate by size available to help offerors price the garments?
ANSWER: No
Packaging: The PDs state to follow CUF storage practices. Could you clarify whether garments should be shipped on hangers or folded, and if specific polybags or cartons are required?
ANSWER: Folded in a plastic bag or plastic lined box
Government Furnished Material: Will the Government handle freight/shipping of the fabric to our facility, or should we include pickup/freight costs in our pricing?
ANSWER: Government will handle shipping
Delivery Requirements: Are there specific receiving hours, appointment requirements, or pallet dimensions for deliveries to Bldg 913?
ANSWER: All SAMPLES must be shipped as instructed in the solicitation. For contract deliverables, that will be reviewed at a later date.
Could you please provide the Government pattern files for all garments required under the solicitation: Men's India White Coat, Men's India White Trouser, Women's India White Coat, Women's India White Trouser, and Women's India White Skirt?
ANSWER: Not until awarded
If available, we would appreciate the digital patterns in DXF/AAMA, ASTM, Gerber AccuMark, or the Government's available digital format, along with any grading information or pattern instructions applicable to the pre-award samples.
ANSWER: We use Gerber / Accumark
Could you also please provide the latest/final Purchase Descriptions (PDs) applicable to each of the five India White garments, including any revised PDs incorporated through the most recent solicitation amendments? We want to ensure that our patterns and pre-award samples are developed to the current requirements.
ANSWER: We are sening our latest PD's
The pattern files and current PDs will help us prepare the samples in accordance with the specifications and accurately determine fabric consumption and production requirements.
ANSWER: : Not until awarded
RFI BATCH # 4 Questions and Answers
Would you please provide Purchase Description WP-PD-21-01, Cloth, Twill, Polyester/Cotton, White (Local Stock Number C0053)? The garment PDs reference this document as being available through the contracting activity. Having it would help us obtain accurate mill quotes and develop pricing for the years following the initial GFM year.
Answer: This is not part of this solicitation
Does the Government have an estimated quantity for each CLIN that it anticipates ordering during the initial GFM year?
Answer: Yes, approx. #
For future delivery orders, should we anticipate the full quantity being delivered at one time, or are orders generally delivered in scheduled partial quantities, such as monthly or every other month?
Is there an anticipated minimum lot size?
Answer: usually delivered altogether
RFI Batch 2 indicates that DFARS 252.211-7003 applies. Could you please confirm whether IUID marking is required on each individual garment? If so, could you also provide the preferred marking method and location?
Answer: follow as per PD
Could you please provide the warehouse receiving hours and let us know whether a delivery appointment is required?
Answer: 7: 00 to 4:30 no appointment is needed
Are there specific packing requirements we should account for in our pricing, such as individual bagging, cartons, labels, or palletization?
Answer: all items get packed in boxes
For the required samples, should the specified buttons and toggles be installed, or may the samples be submitted with the required buttonholes and eyelets only?
Answer: No buttons are needed for the sample upon return. Just buttonholes and eyelets
For production orders, should the coats and trousers be delivered with the buttons installed or without buttons?
Answer: Without
We see the applicable button and toggle types listed in the PDs, but we were unable to locate the quantity required per garment. Could you please confirm the quantities for the following?
Answer:
Coat: B0050 (36 ligne), B0031 (25 ligne), and A0050 toggle
Trousers: B0156 and A0050 toggle
Coat: B0050 (36 ligne), 8 each B0031 (25 ligne), 4 each and A0050 toggle 10 each male or female
Trouser: B0156 and A0050 toggle 1 each male or female
Could you please clarify the basis for award? Section M references lowest price, while FAR 52.212- 2 indicates that non-price factors are more important than price. We just want to make sure we understand how the Government intends to evaluate the offers.
Answer: all of the above
FAR 52.209-3 currently shows portions of the first article requirements as TBD. When available, could you please provide the first article quantity, delivery requirements, submission location, and approval timeline?
Answer: Should be sometime mid 2027
Could you please confirm the size of each sample included in the Government sample kits?
Answer: Skirt 29XS, Men's Wt. Coat -40-S, Women's Wt. Ct-8-R, Men's Wt. Trouser - 41-31 Women's Wt. Trouser - 44-S
Will there be an opportunity for offerors to view or inspect the CUF standard samples prior to submitting their samples?
Answer: No
Could you please provide the applicable finished-garment measurement tolerances for the coats?
We reviewed Table II of WP-PD-21-11 and WP-PD-26-01 but were unable to locate the tolerances.
Answer: Should be in the PD
The specified Stickery hook-and-eye tapes appear to be discontinued. For the years following the initial year, would an equivalent product meeting the required dimensions and performance requirements be acceptable?
Answer: Please adhere to specifications. In the event the item is discontinued in the future out years, the government will make a determination at the time of the out years.
Could you please clarify the required eyelet location on the Women's Trouser? We noticed that paragraphs 3.8.1.6.2 and 3.8.3.1 of WP-PD-21-13 appear to provide different requirements.
Answer: PD should be correct
For the Skirt, could you please confirm whether V0003 is the governing purchase description and which zipper Local Stock Number should be used, Z0192 or Z0149?
Answer: Z0192
CERTIFICATIONS & REPRESENTATIONS
-Delivery-order minimums: Amendment 0002 says the CLIN minimum/maximum table will be updated upon award. Should offerors price on the assumption that there is no stated minimum quantity per CLIN on an individual delivery order, or will those minimums be established before quotes are due?
ANSWER: the requirement is for an Firm Fixed Price IDIQ, the term is November 1, 2026, through October 31, 2033. Offerors are to provide their best and final prices in accordance with established CLINs in the solicitations, terms, and conditions
-IUID Marking: Section B references DFARS 252.211-7003. Is IUID marking required on these garments?
ANSWER: *DFARS 252.225-7012 Preference for Certain Domestic Commodities _______________________ Vendor Acknowledge*
NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification, or a recognized DoD unique identification equivalent.
RFI BATCH # 5 Questions and Answers
-Pre-cut sample pieces: If the Government pre-cut sample pieces do not yield the finished measurements in the PD tables, will the samples be evaluated against the PD measurements or against the construction of the Government-cut pieces?
Answer: Against the construction of the government - cut pieces.
Men's Coat kit size 40-S: Table II of WP-PD-21-11 lists row 40-R. Please confirm the finished center back length for 40-S is 28.00 inches and the sleeve length is 17.50 inches, per the Coat Lengths grade in Table II.
Answer: Yes that is correct
-May an offeror that did not request the government sample kit manufacture the five required pre-award samples using independently sourced materials that comply with all specifications, without requesting a late kit or exception?
Answer: Must meet the specifications, terms, and conditions and sample MUST be RECEIVED by the Government on or before, NO LATER THAN November 16th, 2026 1400 (200PM) Eastern
.Standard Time, NO EXEPCTIONS
-Does the November 16 closing time govern at noon EST as shown in SAM's deadline field, or 2:
00 p.m. EST as stated in Amendment 0005?
Answer: All samples MUST be RECEIVED by the Government on or before, NO LATER THAN November 16th, 2026 1400 (200PM) Eastern Standard Time, NO EXEPCTIONS
RFI BATCH # 6 Questions and Answers
During our review of the materials received against the applicable Purchase Descriptions , we identified several items for which we would appreciate the Government's clarification.
We have attached photographs showing the condition of the sample kits as received.
1. Missing Hook-and-Eye Components - Coats and Skirt
Amendment 0004, RFI Batch 3, indicated that the Government-furnished sample kits would include the accessories necessary to assemble each garment.
However, the following components do not appear to have been included:
Women's Skirt: Hook F0076 and Eye F0077 (PD Sections 3.6.1 and 3.6.2).
Men's and Women's Coats: Hook Tape F0075 and Eye Tape F0074 (PD Section 3.6.3).
ANSWER: Men's and Women's Coats: Hook Tape F0075 and Eye Tape F0074 (PD Section 3.6.3) were included in packet in envelope. Skirt hook and eye was not.
a. Will the Government provide these missing components separately?
ANSWER: Men's and Women's hook and eye tape F0075 and Eye Tape F0074 was included in the envelope. Skirt hook and eye was not
b. If they will not be furnished, is contractor authorized to obtain the required components directly?
ANSWER: Yes if available
c. Since the coat PDs identify certain Yale hook-and-eye tape components as discontinued, would the Government authorize an equivalent substitute that meets the functional and dimensional requirements?
ANSWER: Yes
d. If these components are intentionally excluded from the pre-award kits, are they nevertheless required to be installed on the completed samples?
ANSWER: Yes they are required to be installed on all garments. The coat hook and eye were included but not the skirt hook and eye.
2. Women's Skirt - Bottom Hem (Size 29 XS)
The skirt arrived with an unfinished bottom edge.
Section 3.7.12 of the skirt PD states that the bottom hem shall be left unfinished.
Could you please confirm whether the Government expects the sample skirt to be returned with the bottom edge unhemmed, as received, while all other required construction and finishing operations are completed?
ANSWER: Yes Unhemmed
Additionally, should the bottom edge remain raw, or is over-edge stitching required?
ANSWER: Raw
3. Women's Trousers - Bottom Finish (Size 44 S)
The women's trouser kit arrived with unfinished leg bottoms.
WPPD2113, Table III, indicates that all trousers are unfinished, while Section 3.4 references over-edge stitching of the leg bottoms.
Could you please confirm that the completed women's trouser sample should have over-edge stitching at the bottom of each leg but should not have a folded or sewn hem?
ANSWER: leave unfinished with no stitching.
4. Men's Trousers - Bottom Finish (Size 41, 31-Inch Inseam)
Unlike the women's trousers, the men's trouser kit arrived partially assembled, with stitching already completed, and the leg bottoms appear to have been finished.
However, WPPD2112 references measurements taken to an unhemmed bottom edge and requires over-edge stitching.
Could you please clarify:
a. Is the manufacturer expected to retain the existing finish on the Government-provided men's trouser pieces?
ANSWER: ? Yes
b. Should the men's trouser leg bottoms remain unhemmed, with over-edge stitching only, as indicated in the PD?
ANSWER: Hem the bottom of the male trousers, with stitching.
c. If the condition of the furnished pieces differs from the specified construction requirements, which should govern the pre-award sample?
ANSWER: Construct garments as per the cut work.
5. Men's and Women's Coats - Sleeve Finishing
Both coat kits arrived with unfinished sleeve edges.
WPPD2111 and WPPD2601, Table II, specify sleeve measurements taken to the finished sleeve hem.
For the furnished sample sizes (Men's 40 S and Women's 8 R), the listed sleeve measurement is
17.50 inches.
ANSWER: Yes
a. Does the Government expect the manufacturer to complete the sleeve hems on both coats prior to sample submission?
ANSWER: No. Sleeves are left unhemmed
b. Should the finished sleeve measurements be exactly 17.50 inches, measured according to Table II?
ANSWER: Yes
c. Is there an allowable manufacturing tolerance for these measurements? We were unable to identify a specific tolerance in the coat PDs.
ANSWER: Just follow the seam allowance as per each garment.
6. Women's Trousers - Conflicting Eyelet Placement
During our review of WPPD2113, we identified what appears to be a contradiction regarding the sewn eyelet location:
Section 3.8.1.6.2 specifies the eyelet on the right front (as worn).
Section 3.8.3.1 specifies the buttonhole on the right waistband and the sewn eyelet on the left waistband.
We understand this concern was raised previously in the RFI responses. However, we would appreciate a definitive clarification to ensure our manufacturer does not incorrectly position the closure.
Could you please confirm which location governs the construction of the women's trouser sample?
ANSWER: On women's trousers the eyelet is on the front left as worn. The buttonhole is on front right as worn. Men trousers are the opposite of women.
If available, an annotated drawing or reference to the applicable pattern markings would be helpful.
7. Buttons and Required Closures
Based on the Amendment 0004 RFI responses, our understanding is that the pre-award samples are to be submitted without buttons installed, but with the applicable buttonholes and sewn eyelets completed.
Could you please confirm that this applies to both men's and women's coats and trousers?
ANSWER: Yes
Evaluation Factors for Award
Miscellaneous text in this section has been modified from:
Addendum FAR 52.212-2
EVALUATION--COMMERCIAL ITEMS
Provisions that are incorporated by reference (by Citation Number, Title, and Date), have the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.
The following provisions are incorporated into 52.212-2 as an addendum to this solicitation:
Evaluation Factors for Award
(a) Basis for Contract Award. This is a lowest price source selection conducted in accordance with the Revolutionary Federal Acquisition Regulation Overhaul (RFO) Federal Acquisition Regulation FAR…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .