Attachment_0013_DI-SAFT-80102B_Safety_Assessment_Report.pdf
Data Item Description Rev. B PDF 176 KB Posted
- Attached to
- Expeditionary Shelter Protection System (ESPS)
- Solicitation number
- W911QY-16-R-0003
About this file
Attachment 0013_DI-SAFT-80102B_Safety Assessment Report
View the file
Other versions and copies of DI-SAFT-80102B
Who attaches DI-SAFT-80102B
Other files
Show 40 more
Latest 50 of 100 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA IÏEM DESCRIPTION I F m Approved
OMS NO. 0704-0188
Safety Assessment Report (SAR) DI-SAFT-80102B I
, DESCRIPTIONIPURPOSE
1.1 The Safety Assessment Report is a comprehensive evaluation of the safety risks being assumed prior to test or ,peration of the system or at contract w e t i o n . It identifies all safety features of the system, design, and procedural ~azarcis that may be present in the system being acquired, and specific pmpcedural conmLS and precautions that should E followed.
APPROVAL DATE 5. OFFICE OF PRIMARY RESPONSIBILITY (@R) Ba. OTIC APPUCABLE 6b. GIDEPAPRICABLE (wM"D)
950731
F/AFMC-SE,
, APPLlCAtlONllNTERRELlONSnlP
7.1 This Data Item Description (DID) contains the content and format preparation instructions for the data product generated by the specific and discrete task requirement as delineated in the contract.
7.2 Data items which relate to this DI SAFT-80101B1 System Saf&y Hazard Analysis Report; DI-SAFT-80105B.
Systm Safety Program Progress Report; and DI-SAlT"80106B, Health Hazard Assessment Repoxt.
7.3 'Ibis DID s ~ ~ ~ r s e d t s DI-Sm-80102A.
I. APPROVAL LIMITATION ' ' 9a APPUCABLE FORMS SO. AMSC NUMBER
F7 139 I m
L PMPAFWTION INSTRUCTIONS
10.1 Source.- The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments and revisions, shall be as reflected in the contract.
10.2 Contents. The Safety Assessment Report (SAR) shall include the following infomation:
10.2.1 Introduction. State, in n d v e form, the purpose of the safety assessment report.
10.2.2 technical manuals, System Program Plan, System Specification, etc., and shall include the following:
. . . This section may be developed by refemcing other program documentation such as
a. The purpose and intended use of the system.
b. A brief historical s u m m a r y of system development.
(Continued on Page 2:
11. DISTRIBUTION STATEMENT
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
Copyright Air Force Materiel Command Standardization Office (ComSO) Provided by IHSnvocat� Licensee=US Army Materiel Command/5974512002, User=Devine, Ryan
Not for Resale, 05/27/2015 10:09:47 MDTNo reproduction or networking permitted without license from IHS
DI-SAFI"80102B
Block 10, Preparation Instructions (Continued)
c. A brief description of the system and its components. Include name, type, model number, and general physical characteristics of the overall system and its major subsystems and components. Software and its roles shall be included in this description.
d. As applicable,'a descnptlon of any other system(s) which will be tested or opented in combination with this system.
e. As applicable, either photos, charts, flowhctional diagrams, sketches, or schematics to support the system description, test, or operation.
10.2.3 ,qvsrem onentiom.
a. A description or reference of the procedures for operating, testing and maintaining the system. Discuss the safety design features and controls incorporated into the system as they relate to the operating procedures.
b. A description of any special safety procedures nwded to assure safe operations, test and maintenance, including emergency proccdures. *.
c. A description of anticipated operating environments, and any specific skills required for safe operation, test, maintenance, transportation or disposal.
P d. A description of any special facility requirements or personal equipment to support the system.
b ,+
10.2.4 Svsterns safety engineering. This section shall include:
a A s u m m a r y or reference of the safety criteria and methodology u& to classify and rank hazardous conditions.
b. A description of or reference to the analyses and tests performed to identify hazardous conditions inherent in the system.
(1) A list of all hazards by subsystem or major component level that have been identified and considered from the inception of the program in an appendix to this Sm.
(a) A discussion of the hazards and the actions that have been taken to eliminate or control these items.
(b) A discussion of the effects of these contmls on the probability of Occurrence and seventy level of the potential mishaps.
(c) A D i s c ~ s i ~ of fie residual risks that remain after the controls are applied or for which no .
controls could be applied.
(2) A discussion of or reference to the results of tests conducted to validate safety criteria requirements and analyses.
Copyright Air Force Materiel Command Standardization Office (ComSO) Provided by IHSnvocat� Licensee=US Army Materiel Command/5974512002, User=Devine, Ryan
Not for Resale, 05/27/2015 10:09:47 MDTNo reproduction or networking permitted without license from IHS íb Bltxk I O . Preparation Instructions (Continued)
10.2.5 Conclusions and recomrner&l!g&. This section shall include:
a. A short assessment of the results of the safety program efforts. A list of all significant hazards dong with specific safety recommendations or precautions required to ensure the safety of personnel and property. The list 01' hazards will be categorized as to-wha!kcr or not they may be expected under normal or abnormal operating conditions.
b. For all hazardous materials generated by or used in the system:
(1) Materiel identification as to type, quantity, and potential hazards.
(2) Safety precautions and procedures necessary during use, stoxage, transportation, and disposal.
(3) A copy of the Material Safety Data Sheet (OSHA Form 20 or DD Form 18 13) as required.
c. A statement that the system does not contain or generate hazardous materials (i.e., explosive, toxic, radioactive;carcinogenic, etc.) .
d. A statement signed by the contractor system safety manager and the program manager stating that all identified hazards have been eliminated or controll@ and that the system is ready to test, operate, or proceed to the next acquisition phase. h àddition, include recommendations applicable to the safe interface of this system with the
10.2.6 Reference. A list of all pertinent references such as test reports, preliminary operating manuals and maintenance manuals.
Page 3 of 3 Pages
Copyright Air Force Materiel Command Standardization Office (ComSO) Provided by IHSnvocat� Licensee=US Army Materiel Command/5974512002, User=Devine, Ryan
Not for Resale, 05/27/2015 10:09:47 MDTNo reproduction or networking permitted without license from IHS
File details come from the government source that posted it. Updated .