Attachment 0028 - TDPL M213 W_Clip.pdf

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 1

PICATINNY ARSENAL, NEW JERSEY 07806-5000

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

TDPL COVER SHEET RELEASED BY:

1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND

OTHER TECHNICAL DATA LISTED IN THIS TDPL.

2. THIS TDPL IS COMPRISED OF THE FOLLOWING SECTIONS WHICH LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE, PACKAGE AND INSPECT THE MATERIAL BEING PRODUCED. (NA INDICATES NOT APPLICABLE)

FROM TO

A. PRODUCT DRAWINGS AND ASSOCIATED LISTS ........................................ 0001 0002 B. PACKAGING DRAWINGS AND DOCUMENTS ............................................ 0003 0004 C. INSPECTION DRAWINGS AND DOCUMENTS ........................................... 0005 0005 D. SPECIFICATIONS AND STANDARDS ............................................... 0006 0014 E. HAZARDOUS COMPONENT SAFETY DATA STATEMENTS ................................. 0015 0015 F. OUTSTANDING APPROVED ENGINEERING CHANGES .................................... 0016 0016 G. TDPL NOTE LEGEND ............................................................ 0017 0017

3. DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS LISTED IN THE ABOVE TDPL SECTIONS ARE IDENTIFIED AS TO TYPE BY PREFIX CODES AS FOLLOWS:

DX: SOURCE CONTROL NC: NON CATEGORIZED SPEC

PE: PERFORMANCE SPEC PK: PACKAGING SPEC

QS: SUPPLEMENTAL QUALITY ASSURANCE PROVISION SD: HAZARDOUS SAFETY DATA SHEET

4. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDPL IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE REVISION OR AMENDMENT FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDPL. SUPERCEDED SPECIFICATIONS AND STANDARDS WHICH MAYBE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERCEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDPL. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL

PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE.

5. ALL REFERENCES ON DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS TO PICATINNY, FRANKFORD OR ROCK ISLAND ARSENALS WILL BE CONSIDERED AS CHANGED TO COMMANDER, ARDEC, ATTN: RDAR-EIS-P BUILDING 12 ROOM 4, PICATINNY, NJ 07806-5000

6. ALL REFERENCES TO PARTS LISTS ON US ARMY TANK AUTOMOTIVE COMMAND (TACOM) DRAWINGS SHALL BE DISREGARDED

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

TDPL COVER SHEET RELEASED BY:

7. THE HIGHEST SECURITY CLASSIFICATION CONTAINED WITHIN THIS TECHNICAL DATA PACKAGE IS:

"L LIMITED - PROPRIETARY INFORMATION LIM

THE SECURITY CLASSIFICATION OF DRAWINGS/DOCUMENTS, ASSOCIATED LISTS AND SPECIFICATIONS/STANDARDS ARE SHOWN BY CODE UNDER

THE SEC CL COLUMN.

8. DISTRIBUTION STATEMENT: THE MOST RESTRICTIVE DISTRIBUTION STATEMENT CONTAINED WITHIN THIS TDPL IS:

"D DISTR STATEMENT D - DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY

PER DODI 5230.24, CHANGE 1, 2016, ALLOWABLE DISTRIBUTION STATEMENTS ARE:

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES (REASON) (DATE OF DETERMINATION).

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS (REASON) (DATED OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT E: DISTRIBUTION AUTHORIZED TO DoD COMPONENTS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT F: FURTHER DISSEMINATION ONLY AS DIRECTED BY (CONTROLLING OFFICE) (DATE OF DETERMINATION) OR HIGHER DoD AUTHORITY.

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 1

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

E 19200 12579607 001 0001 A C 08/04/2009 GEOMETRIC SYMBOLS F/DIMENSIONING TOLERANCING

DX A 19200 12977368 001 0001 A D 06/12/2013 SEALANT, COMPOUND

C 19200 12984940 001 0001 D G 01/25/2017 DETONATOR ASSEMBLY

C 19200 12984941 001 0001 A C 08/24/2011 CASE,DETONATOR

C 19200 12984942 001 0001 A D 08/24/2011 SAFETY CAP

DX C 19200 12991256 001 0001 A AB 06/18/2018 PRIMER, INTERIOR, AMMUNITION

C 19200 12999072 001 0001 D B 08/30/2013 PULL RING ASSEMBLY

DX C 19200 13011786 001 0001 A - 08/18/2005 SEALING COMPOUND

D 19200 13014968 001 0001 A D 11/21/2013 INK,MKG,OPA,F/NONPOROUS SURF&INK-JET APPL

DX A 19200 13015354 001 0001 A A 12/11/2015 COATING REF

C 19200 13021514 001 0001 A - 05/14/2008 POWDER COATING

F 19200 13021905 001 0001 C D 06/12/2013 LIM CONFIDENCE CLIP

A 19200 13026120 001 0001 A - 08/08/2013 COAI - FUZE, HAND GRENADE, M213, W/CONF

F 19203 13032728 001 0001 D - 05/11/2011 FUZE, GRENADE, HAND M213 ASSEMBLY

D 19200 13058651 001 0001 D - 10/25/2016 ADVISORY INFO ON HAND GRENADE FUZES

DX D 19200 13059830 001 0001 A - 07/14/2015 PVAc BINDER

B 23198 7548576 001 0001 D N 10/19/2006 PRIMER HOLDER ASSEMBLY

B 19203 7548578 001 0001 D N 05/14/2010 STRIKER ASSEMBLY

A 19203 7548579 001 0001 A T 07/15/2011 PIN, HINGE

C 23198 7548581 001 0001 D J 10/14/2008 POINT, STRIKER

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

C 19203 7548584 001 0001 D AT 06/24/2015 RING, PULL

C 19203 7548585 001 0001 D P 01/18/2006 SPRING

C 19203 7548586 001 0001 D K 08/13/2007 STRIKER

C 23198 7548591 001 0001 D M 12/11/2015 HOLDER, PRIMER

D 19203 8799925 001 0001 D R 06/20/2013 PRIMER, PERCUSSION M42 ASSEMBLY

B 19203 8800486 001 0001 A J 05/11/2011 WASHER

F 19203 8822131 001 0001 D AU 07/14/2015 FUZE, GRENADE, HAND M213 ASSEMBLY

F 19203 8822132 001 0001 D AB 08/29/2014 BODY

C 19203 8822375 001 0001 A G 08/24/2011 CASE, DETONATOR

D 19203 8822376 001 0001 D T 01/25/2017 DETONATOR ASSEMBLY

D 19203 8822378 001 0002 D V 08/30/2013 LEVER

D 19203 8822378 002 0002 D V 08/30/2013 LEVER

B 19203 8837991 001 0001 D J 06/26/2008 CUP

B 19203 8837992 001 0001 D H 06/26/2008 ANVIL

B 19203 8837993 001 0001 D J 10/14/2008 COVER

F 19203 9235210 001 0002 D AJ 07/14/2015 FUZE, GRENADE: HAND, PRACTICE, M228 REF

F 19203 9235210 002 0002 D AF 08/02/2010 FUZE, GRENADE: HAND, PRACTICE, M228 REF

C 19203 9235366 001 0001 A J 11/21/2013 CLIP, SAFETY

C 19203 9242622 001 0001 A G 08/24/2011 RETAINER, WASHER

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 3

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PACKAGING DRAWINGS AND DOCUMENTS

D 19200 10521856 001 0001 A F 07/13/2016 SYMBOLS, IDENT MARKINGS NATO; AMMO BOXES REF C 19200 12977298 001 0001 A D 06/24/2015 PROCEDURES METALLIC SEAL WIRE APPLICATIO

A 19200 12982865 001 0001 A L 04/18/2019 MINIMUM MKG INSTR AMMO EXPLOSIVE CNTNR

A 19200 12999545 001 0001 A J 01/26/2018 TWO-DIM BARCODE AMMO LABEL INSTRUCTIONS

F 19200 13023613 001 0001 A A 08/08/2013 PKG & MKG BOX WB FUZE HAND GRENADE:M213 M228 C 19200 13023614 001 0001 A A 08/08/2013 PKG & MKG CARTON FUZE HAND GRENADE:M213 228 D 19200 13023615 001 0001 A C 08/08/2013 SPRT,PKG,AMMO F/FUZE,GRENADE,M213 OR M228

F 19203 13032728 001 0001 D - 05/11/2011 FUZE, GRENADE, HAND M213 ASSEMBLY REF

DX C 19200 13060578 001 0001 A - 02/13/2017 PRESERVATIVE, WOOD

A 19200 13064136 001 0001 A B 06/26/2018 WOOD PACKING MATERIAL, PRESERVATIVE TREA

A 28620 1948-4116 001 0001 A 13 01/01/2017 UNITIZATION PROC F/BOXED AMMO

A 28620 1948-4116/71 001 0001 A 03 05/01/2015 UNIT PROC BXED AMMO,FUZE,HAND GRENADE,M228 REF F 19200 7553659 001 0001 A J 04/11/2019 PKG & MKG WBD BOX ASSY M2A2 .30CAL CRTRG REF

C 19200 8594163 001 0001 A J 06/24/2015 ***OBSOLETE***REPLACED BY 8794342

D 19203 8794342 001 0001 A AM 03/28/2019 SEAL, METALLIC

D 19203 8796522 001 0001 A BU 04/26/2017 MARKING DIAGRAM SEALING WOOD PKG BOXES

F 19203 8822131 001 0001 D AU 07/14/2015 FUZE, GRENADE, HAND M213 ASSEMBLY REF

C 19203 9211789 001 0001 A V 01/26/2018 INK, MKG, OPAQUE F/POROUS SURFACES

F 19203 9235210 001 0002 D AJ 07/14/2015 FUZE, GRENADE: HAND, PRACTICE, M228 REF

F 19203 9235210 002 0002 D AF 08/02/2010 FUZE, GRENADE: HAND, PRACTICE, M228 REF

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 4

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PACKAGING DRAWINGS AND DOCUMENTS

C 19203 9325874 001 0001 A K 01/26/2018 PACKING FOR LIGHT BOXES

D 28620 ACV00561 001 0001 A G 01/26/2018 UNIT LOAD MARKING F/SHIP STORAGE AMMO

DX C 28620 ACV00617 001 0001 A D 06/13/2013 SEALLESS COMB TOOL FOR 3/4" STEEL STRAP D 28620 ACV00831 001 0001 A - 03/01/2010 HEAT TREATMENT OF WOODEN PALLET,SKIDS,FILLER ASSY

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 5

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

INSPECTION DRAWINGS AND DOCUMENTS

QS A 19203 8794342 001 0001 A C 07/27/1998 SEAL, METALLIC

D 19203 8801839 001 0001 A B 02/17/2006 TIMER, ELECTRONIC

D 19203 8802149 001 0005 A D 02/17/2006 FIXTURE DROP TEST

D 19203 8802149 002 0005 A D 02/17/2006 FIXTURE DROP TEST

D 19203 8802149 003 0005 A D 02/17/2006 FIXTURE DROP TEST

D 19203 8802149 004 0005 A D 02/17/2006 FIXTURE DROP TEST

D 19203 8802149 005 0005 A D 02/17/2006 FIXTURE DROP TEST

A 19203 8815991 001 0001 A E 06/03/2010 PRIMER HOLDER

A 19203 8815992 001 0001 A F 08/30/2013 FIRING PIN, PRIMER SENSITIVITY TESTING FIXTURE

A 19203 8816003 001 0001 A G 03/18/2002 PRIMER HOLDER ADAPTER

A 19203 8816014 001 0001 A C 08/30/2013 ADAPTER, BALL PRIMER SENSITIVITY TESTING FIXTURE

B 19203 8816636 001 0001 A C 02/17/2006 ADAPTER DROP TEST

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 6

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-DTL-14943 D E 2 02/05/2016 FUSE, GRENADE, HAND, PRACTICE: M228

MIL-DTL-32328 D - 2 01/22/2016 FUZE, HAND GRENADE,M213 LOAD ASSY PACK

TB700-2 A A 07/30/2012 DOD AMMO EXPL HAZARD CLASSIFICATION

A-A-00208 D 10/01/2013 INK,MARKING,STENCIL,OPAQUE(POROUS/NON-POROUS) *

A-A-208 (REPLACED BY A-A-00208 ) *

A-A-1558 A A 2 11/12/2009 PAINT, STENCIL *

A-A-1684 C 07/24/1997 TAPE,PRESSURE-SENSITIVE ADHESIVE (PLASTI *

A-A-1733 A A 2 03/30/2000 STENCILBOARD *

A-A-55057 A B 12/15/2010 PANELS, WOOD/WOOD BASED, CONSTRUCTION *

A-A-59342 A - 3 08/21/2018 ETHYL ALCOHOL(FOR ORDNANCE USE) *

A-A-59383 C 1 01/31/2017 MARKING MEDIA,OPAQUE(POROUS/NON-POROUS SURFACES) *

AR740-1 - 08/26/2008 STORAGE SUPPLY ACTIVITY OPERATIONS *

DOD-4100.39 - 10/01/2010 FLIS PRICEDURE MAN MULTIPLE APPL & REFE *

FF-S-2738 A 1 2 07/12/2018 SEALS, ANTIPILFERAGE *

GGG-G-61 A - 5 10/03/2013 GAGE PLUG, RING, PLAIN THREAD...NFND *

JAN-C-263 A - 4 10/11/2013 CALCIUM STEARATE...NFND *

MIL-A-159 A D 1 2 05/15/2014 ANTIMONY SULFIDE(FOR USE IN AMMO)...NFND *

MIL-A-2550 A B 1 2 10/18/2013 AMMUNITION, GENERAL SPEC FOR...NFND *

MIL-A-48078 A A 2 10/18/2013 AMMUNITION, STD QA PROVISIONS *

MIL-A-70625 A A 2 04/24/2000 AUTOMATED ACCEPTANCE INSPEC EQPT DSGN *

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 7

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-B-162 D 3 2 03/14/1997 BARIUM NITRATE...NFND *

MIL-C-13739 A A 1 3 08/08/2013 COMPOSITION, DELAY *

MIL-D-3464 E 04/21/1987 DESICCANTS,ACTIVATED BAGGED,PKG USE AND *

Q MIL-DTL-11195 A H 1 08/23/2016 ENAMEL, LUSTERLESS, FAST DRY, VOC COMP *

MIL-DTL-11414 A F 1 04/24/2018 PRIMER,ALKYD,FAST DRY,CORROSION INHIBITING *

MIL-P-22332 (REPLACED BY MIL-DTL-11414 ) *

MIL-DTL-117 A H 2 1 10/01/2014 BAGS, HEAT-SEALABLE *

MIL-DTL-14067 D D 1 03/16/2019 POWDERS, METAL (FOR USE IN AMMUNITION) *

MIL-P-14067 (REPLACED BY MIL-DTL-14067 ) *

MIL-DTL-15011 A K 1 03/31/2017 PALLETS, MATERIAL HANDLING, WOOD POST-CONSTRUCT *

MIL-DTL-155 A B 05/07/2018 GRAPHITE, DRY, FOR USE IN AMMUNITION *

MIL-G-155 (REPLACED BY MIL-DTL-155 ) *

MIL-DTL-2427 A J 03/29/2017 BOX, AMMUNITION PACKING: WOOD, NAILED *

MIL-DTL-398 A D 1 1 04/20/2004 RDX (CYCLOTRIMETHYLENETRINITRAMINE) *

MIL-DTL-398 A D 1 1 04/20/2004 RDX (CYCLOTRIMETHYLENETRINITRAMINE) *

MIL-R-398 (REPLACED BY MIL-DTL-398 ) ***

MIL-DTL-45449 A C 2 1 05/16/2017 PALLET,UNITS,WOOD,F/SHPT OF PJCTL METAL PARTS/PJ *

MIL-DTL-46506 A E 3 10/31/2016 BOXES,AMMUNITION PACKING,WOOD,WIREBOUND *

MIL-DTL-757 A C 1 01/31/2017 LEAD STYPHNATE, NORMAL *

Q MIL-E-52891 A B 3 06/17/2015 ENAMEL, LUSTERLESS, ZINC PHOS...NFND *

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 8

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-G-10944 B 3 1 01/11/2013 GAGES, DIMENSIONAL CONTROL...NFND *

MIL-HDBK-1461 A A 3 07/12/2018 AMMO MANUFACTURERS AND THEIR SYMBOLS *

MIL-HDBK-205 A A 1 04/03/2013 PHOSPHATE, BLACK OXIDE COATING OF...NFND *

MIL-L-16355 E 1 05/04/2007 LEAD STYPHNATE, BASIC *

MIL-L-3055 C 1 1 04/03/2014 LEAD AZIDE...NFND *

MIL-P-20444 A C 1 3 05/30/2008 PRIMER,PERCUSSION,M42 PARTS FOR AND LAP *

MIL-P-60169 B 5 10/10/2013 PAPER, SEALING...NFND *

MIL-P-60312 A C 2 2 10/16/2009 PARTS,MOLDED,PLASTIC FOAM POLYSTYRENE/FO *

MIL-PRF-50449 A C 1 06/03/2014 FILLER, SHEET FORM...NFND *

MIL-PRF-61002 A B 2 06/05/2013 PRESSURE-SENSITIVE ADHESIVE LABELS *

MIL-S-11310 E 2 06/16/1997 STEEL BARS, CARBON...NFND *

MIL-STD-1168 A C 1 02/21/2019 AMMUNITION LOT NUMBER AMMO DATA CARD *

MIL-STD-129 R 1 05/24/2018 MILITARY MARKINGS F/SHIPMENT/STORAGE *

MIL-STD-130 A N 1 11/16/2012 IDENTIFICATION MARKING OF U.S. MILITARY *

MIL-STD-1660 A 08/07/2008 DESIGN CRITERIA AMMUNITION UNIT LOADS *

MIL-STD-171 A F 05/31/2011 FINISHING OF METAL AND WOOD SURFACES *

MIL-STD-1916 A - 2 06/05/2014 DOD PREFER MTHDS F/ACCEPTANCE PRODUCT *

MIL-STD-2073-1 A E 4 04/22/2019 STANDARD PRACTICE F/ MILITARY PACKAGES *

MIL-STD-331 A D 05/31/2017 FUZES,IGNITION SAFETY DEVICES,PERF TESTS *

NAS410 - 3 12/19/2014 NAS CERT/QUAL/NONDESTRUCTIVE TEST-REV.04 *

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 9

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

NAVSUP-PUB-505-CH-1 - 04/15/2007 TRANSPORT PREP HAZ MATERIALMIL AIR SHIPM *

STANAG-2953 - 02/17/2017 IDENTIFICATION OF AMMO - AOP-2(C) ED 3 *

TM38-250 - 12/11/2001 PREPARING HAZARDOUS MATERIALS F/MILITARY AIR SHI *

TM743-200-1 - 05/04/1978 HANDLING EQUIPMENT-CHANGES 1-22 *

TT-C-490 A F 4 07/20/2018 CHEMICAL CONVERSION COATINGS *

AFMAN24-204 - 10/12/2004 PREPARING HAZ MATERIALS MIL AIR SHIPMENT **

AMCR-385-100 - 1 09/26/1995 SAFETY MANUAL **

ASME-B46.1 A - 01/01/2009 SURFACE TEXTURE **

ASME-B46.1 A - 01/01/2009 SURFACE TEXTURE **

MIL-STD-10 (REPLACED BY ASME-B46.1 ) ***

ASME-B47.1 - 01/01/2012 GAGE BLANKS **

CS8 (REPLACED BY ASME-B47.1 )

ASME-Y14.100 A - 11/14/2017 ENGINEERING DRAWING PRACTICES **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ANSI-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ANSI-Y14.5 (REPLACED BY ASME-Y14.5 ) **

ASTM-A108 - 11/01/2018 STANDARD SPEC F/STEEL BAR **

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 10

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-A109/A109M - 11/01/2018 STANDARD SPEC FOR STEEL, STRIP, CARBON **

ASTM-A109 (REPLACED BY ASTM-A109/A109M ) **

ASTM-A109/A109M - 11/01/2018 STANDARD SPEC FOR STEEL, STRIP, CARBON **

ASTM-A227/A227M - 09/01/2017 STEEL WIRE,COLD-DRAWN FOR MECH SPRINGS **

ASTM-A228/A228M - 09/01/2018 STANDARD SPEC F/STEEL WIRE **

ASTM-A228 (REPLACED BY ASTM-A228/A228M ) **

ASTM-A510/A510M - 03/01/2018 WIRE RODS AND COARSE ROUND WIRE, CARBON STEEL **

ASTM-A641/A641M A 11/01/2014 STANDARD SPEC FOR ZINC-COATED (GALV) **

ASTM-A641/A641M A 11/01/2014 STANDARD SPEC FOR ZINC-COATED (GALV) **

ASTM-A641 (REPLACED BY ASTM-A641/A641M ) **

ASTM-A681 - 09/01/2015 STANDARD SPEC FOR TOOL STEEL ALLOY **

ASTM-A853 - 03/15/2017 STANDARD SPEC F/STEEL WIRE, CARBON **

ASTM-B117 - 08/01/2018 STANDARD PRAC F/SALT OPER SALT SPRAY **

ASTM-B19 - 05/01/2015 CARTRIDGE BRASS SHEET,STRIP,PLATE,BAR,DISK **

ASTM-B201 A - 04/01/2019 TESTING CHROMATE COATING ON ZINC & CADMI **

ASTM-B209 A - 11/01/2014 STANDARD SPEC F/AL AND AL-ALLOY SHEET **

ASTM-B633 - 03/01/2019 ELECTRODEPOSITED COATINGS ZINC IRON STEEL **

ASTM-B86 - 11/01/2018 ZINC-ALLOY DIE CASTINGS **

ASTM-D1974/D1974M - 10/01/2016 STANDARD PRACTICE/METHODS CLOS,SEALING **

ASTM-D1974 (REPLACED BY ASTM-D1974/D1974M ) **

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 11

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-D2000 A - 06/01/2018 RUBBER PRODUCTS IN AUTOM APPL, CLASS **

ASTM-D2582 - 04/01/2016 STANDARD TEST METH F/PUNCTURE-PROPAGATION **

ASTM-D2794 - 01/01/2019 RESISTANCE OF ORGANIC COATINGS TO EFFECT **

ASTM-D329 - 06/01/2013 STANDARD SPECIFICATION FOR ACETONE **

ASTM-D3359 - 02/01/2017 STANDARD TEST METHOD F/MEASURING ADHESIVE **

ASTM-D3950 - 09/01/2017 STANDARD SPECIFICATION F/STRAPPING **

ASTM-D3953 - 05/01/2015 STANDARD SPEC F/STRAPPING FLAT STEEL/SEALS **

ASTM-D4080 - 06/01/2015 TRICHLOROETHYLENE TECH VAPOR-DEGREASING **

ASTM-D4727/D4727M - 04/01/2017 CORRUGATED SOLID FIBERBOARD SHT STOCK **

ASTM-D4727/D4727M - 04/01/2017 CORRUGATED SOLID FIBERBOARD SHT STOCK **

ASTM-D4727 (REPLACED BY ASTM-D4727/D4727M ) **

ASTM-D5118/D5118M - 10/01/2015 FABRICATION FIBERBOARD SHIPPING BOXES **

ASTM-D5118 (REPLACED BY ASTM-D5118/D5118M ) **

ASTM-D522/D522M - 07/01/2017 MANDREL BEND TEST OF ATTACHED ORGANIC COATINGS **

ASTM-D522 (REPLACED BY ASTM-D522/D522M ) **

ASTM-D523 - 05/01/2018 METHOD OF TEST FOR SPECULAR GLOSS **

ASTM-D6199 A A 10/01/2018 STANDARD PRACTICE QUALITY WOOD MBRS **

ASTM-D6386 A A 06/15/2016 PREPARATION OF ZINC(HOT-DIP GALVANIZED) **

ASTM-D2092 (REPLACED BY ASTM-D6386 ) **

ASTM-D7932 - 09/01/2017 PRINTED, PRESSURE-SENSITIVE ADHESIVE LAB **

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 12

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-D870 - 02/01/2015 STANDARD PRACTICE F/TESTING WATER RESISTANCE OF **

ASTM-D882 - 08/01/2018 STANDARD TEST METHOD TENSILE PROPERTIES **

ASTM-E11 - 04/01/2017 STANDARD SPEC WIRE-CLOTH SIEVES **

ASTM-E1742/E1742M - 03/01/2018 STANDARD PRACTICE F/RADIOGRAPHIC EXAMINATION **

ASTM-E323 A - 06/01/2016 SIEVES, PERFORATED-PLATE, F/TESTING **

ASTM-E8/E8M A 08/01/2016 STANDARD TEST METHOD F/TENSION TESTING **

ASTM-F1667 A A 12/01/2018 STANDARD SPEC DRIVEN FASTENERS **

ASTM-G152 - 07/01/2013 OPERATING OPEN FLAME CARBON ARC LIGHT **

ASTM-G153 - 07/01/2013 OPERATING ENCLOSED CARBON ARC LIGHT APPARATUS **

AWPA-A11 A - 12/10/1987 TREATED WOOD & TREATING SOLUTIONS BY ATOMIC ABSO **

AWPA-A21 - 01/01/2016 ANALYSIS OF WOOD & WOOD TREATING SOLUTIO **

AWPA-A28 - 01/01/2014 DETERMINATION OF PROPICONAZOLE & TEBUCON **

AWPA-A31 - 01/01/2015 ANALYSIS OF SOLUTIONS & WOOD F/AZOLES BY **

AWPA-A40 - 01/01/2013 DETERMINATION OF BORON TRIOXIDE IN TREAT **

AWPA-A41 - 01/01/2012 DETERMINATION OF NAPHTHENIC ACID IN COPP **

AWPA-A43 - 01/01/2014 ANALYSIS OF IMIDACLOPRID IN WOOD & WATER **

AWPA-A48 - 01/01/2015 ANALYSIS OF PROPRICONAZOLE, TEBUCONAZOLE **

AWPA-A64 - 01/01/2017 DETERMINE AMOUNT OF BORON TRIOXIDE IN SO **

AWPA-A88 - 01/01/2012 DETERMINATION OF COPPER CONTENT OF COPPE **

AWPA-A9 - 01/01/2016 ANALYSIS OF TREATED WOOD & TREATING SOLU **

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 13

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

CFR-29 - 07/01/2011 OCCUPATIONAL SAFETY, HEALTH STANDARDS **

DISA-X12.3 - 01/01/1992 ELECTRONIC BUSINESS DATA INTERCHANGE **

IATA-DGR - 01/01/2016 DANGEROUS GOODS REGULATIONS **

ICAO-9284 - 01/01/2015 TECHNICAL INSTR SAFE TRANSPORT DANGEROUS **

ISO-IEC-15434 - 02/01/2019 INFO-TECH TRANSFER SYNTAX HIGH CAPACITY **

ISO-IEC-15438 - 09/15/2015 INFORMATION TECH-AUTO IDENT, DATA **

ISPM-15 - 01/01/2009 INTERNATIONAL STANDARD F/PHYTOSANITARY MEASURES **

MHI-MH10.8.2 - 01/01/2016 DATA IDENTIFIER/APPLICATION IDENTIFIER STD **

PARTS100-199 - 10/01/2012 CODE OF FEDERAL REGULATIONS, TITLE 49 **

PARTS100-199 - 10/01/2012 CODE OF FEDERAL REGULATIONS, TITLE 49 **

CFR-49 (REPLACED BY PARTS100-199 ) **

PS-20 - 06/01/2010 AMERICAN SOFTWOOD LUMBER STANDARD **

SAE-AMS-STD-595 A 02/01/2017 COLORS USED IN GOVERNMENT PROCUREMENT **

SAE-AMS-STD-595 A 02/01/2017 COLORS USED IN GOVERNMENT PROCUREMENT **

FED-STD-595 (REPLACED BY SAE-AMS-STD-595 ) ***

SAE-AMS2759 A G 04/01/2019 HEAT TREATMENT OF STEEL PARTS GEN REQUIREMENTS **

SAE-AMS2759/1 A G 06/01/2019 HEAT TREATMENT OF CARBON AND LOW-ALLOY STEEL **

ASTM-A682/A682M - 07/22/2010 STEEL...WDRN...USE ASTM-A684/A684M ***

ASTM-A682 (REPLACED BY ASTM-A682/A682M ) **

MIL-STD-100 G 1 12/14/2001 STANDARD...CNX...SEE NOTICE F/SUG SOURCE ***

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 14

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-STD-105 A E 3 02/06/2008 SAMPLING...CNX...SEE NOTICE F/SUG SOURCE ***

MIL-STD-109 A C 1 05/31/1995 QUALITY...CNX...SEE NOTICE F/SUG SOURCE ***

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 15

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

HAZARDOUS COMPONENT SAFETY AND DATA STATEMENTS

SD A 19200 117 001 0001 C B 06/14/1983 ZIRCONIUM POWDER

SD A 19200 15 001 0001 C J 06/26/2009 ALUMINUM (POWDER, FLAKE AND GRAIN)

SD A 19200 157 001 0001 C K 08/08/2005 FUZE, GRENADE, HAND, M213

SD A 19200 16 001 0001 C E 11/24/1992 LEAD STYPHNATE (BASIC AND NORMAL)

SD A 19200 17 001 0001 C D 11/25/1992 ANTIMONY SULFIDE (ANTIMONY TRISULFIDE)

SD A 19200 18 001 0001 C E 07/27/1992 TETRACENE

SD A 19200 2525 001 0001 C B 08/08/2005 DETONATOR, F/HAND GRENADE FUZE, M213 AND M215

SD A 19200 296 001 0001 C F 04/24/2007 PRIMER COMPOSITION, PA 101

SD A 19200 4 001 0001 C G 05/01/1991 BARIUM NITRATE

SD A 19200 512 001 0001 C B 10/18/1984 NICKEL POWDER (SS HMIS DOD 6050.5.L)

SD A 19200 52 001 0001 C E 02/04/1993 BARIUM CHROMATE

SD A 19200 53 001 0001 C E 03/30/1993 POTASSIUM PERCHLORATE

SD A 19200 64 001 0001 C K 03/26/2007 PRIMER PERCUSSION M42 AND M42 ALTERNATE

SD A 19200 66 001 0001 C E 04/29/1993 LEAD AZIDE DEXTINATED AND COLLOIDAL

SD A 19200 67 001 0001 C F 01/08/2004 EXPLOSIVE, RDX

SD A 19200 68 001 0001 C G 07/06/1987 PYROTECHNIC COMPOSITION DELAY (BACRO4/KC

SD A 19200 69 001 0001 C B 07/18/1983 ZIRCONIUM NICKEL ALLOY

SD A 19200 855 001 0001 C P 12/14/2011 PRIMER, PERCUSSION, COMMERCIAL

SD A 19200 993 001 0001 C B 10/19/1987 EXPLOSIVE, COMPOSITION, PBX-9407

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 16

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT AFFECTED NUMBER OF ECP DISTRIBUTION APPROVAL CHANGE

CODE CAGE NUMBER IMAGES NUMBER CODE DATE CLASS

OUTSTANDING APPROVED ENGINEERING CHANGES

NOTE - THE FOLLOWING ENGINEERING DOCUMENTS ARE AFFECTED BY APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) WHICH HAVE NOT BEEN INCORPORATED INTO THE AFFECTED DOCUMENTS. THE APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) IDENTIFIED BELOW ARE INCLUDED

WITH AND FORM A PART OF THIS TECHNICAL DATA PACKAGE

NCAGE MIL-DTL-398 1 R15Y5001-1 D 07/01/2016

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 17

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

TDPL NOTE LEGEND

DESCRIPTION OF SYMBOLS IN THE NOTE LEGEND

* -Not Furnished - To be obtained from Defense Logistics Agency (DLA) Document Services, http://quicksearch.dla.mil or https://assist.dla.mil

** -Not Furnished - Commercial specifications and standards may be obtained from the publishers. They are not available from government sources.

*** -Not Furnished - Supplied only upon request submitted to the procuring contract officer.

**** -Not Furnished - Supplied only by request to program/project manager.

REF - Reference Drawing.

Q - The Letter (Q) before the specification number indicates that a qualified products list is required. The number of the QPL is the same as the number of the specification

CS - Computer Software Document - The print of this drawing included in the technical data package is not to be used for manufacture. A computer software program on CD, DVD or via a website or FTP will be furnished by the procuring contracting officer upon request.

SB - Stable Base Drawing - The print of this drawing included in the technical data package is not to be used for manufacture. A stable master will be furnished by the procuring contracting officer upon request.

G - Government Furnished Equipment or Material.

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 18

CAGE 19200

WORKSHEET FOR : 13026120:19200 REQUEST TYPE :

DOCUMENT NUMBER : REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT ECP/RFD/RFW REV AMD ECP/RFD-W PRIORITY CHG CONFIGURATION ITEM SUMMITTAL APPROVAL CHANGE

CODE CAGE NUMBER NUMBER DATE PREPARED CODE CAT NOMENCLATURE TYPE TYPE CLASS

DP 19203 8822378 LIGHT-P 07/31/1989 R LIGHT-P E 2

NC NCAGE ASTM-A681 CHEK-SM 08/24/1989 R CHEK-SM E 2

NC NCAGE ASTM-B86 CASTING 08/01/1989 R CASTING E 2

NC NCAGE MIL-A-159 HAZIOC 01/04/1999 R HAZIOC F 2

NC NCAGE MIL-C-13739 HAZIOC 01/04/1999 R HAZIOC F 2

NC NCAGE MIL-L-16355 HAZTAC 01/04/1999 R HAZTAC F 2

NC NCAGE MIL-L-3055 HAZIOC 01/04/1999 R HAZIOC F 2

NC NCAGE TT-C-490 LIGHT-P 07/31/1989 R LIGHT-P E 2

*** THIS TDPL HAS NOT BEEN VALIDATED ***

07/16/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 19

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13026120:19200

DOCUMENT NUMBER : A 13026120:19200

SPECIFICATION : MIL-A-2550

NATIONAL STOCK NO : 1330-01-591-8976

COAI- FUZE, HAND GRENADE:M213 W/ CLIP REQUEST/PRON ID: 4I9A09O5M2

PREFIX DRAWING/DOCUMENT AFFECTED AFFECTED ECP DISTRIBUTION APPROVAL CHANGE

CODE CAGE NUMBER SHEET NO NUMBER CODE DATE CLASS

WEB OUTSTANDING APPROVED ENGINEERING CHANGES

NOTE - THE FOLLOWING ENGINEERING DOCUMENTS ARE AFFECTED BY APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) WHICH HAVE NOT BEEN INCORPORATED INTO THE AFFECTED DOCUMENTS. THE APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) IDENTIFIED BELOW ARE INCLUDED

WITH AND FORM A PART OF THIS TECHNICAL DATA PACKAGE

NCAGE MIL-DTL-398 002 R15Y5001-1 D 07/01/2016