Attachment 0024 - TDPL_M201A1.pdf

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 1

PICATINNY ARSENAL, NEW JERSEY 07806-5000

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

TDPL COVER SHEET RELEASED BY:

1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND

OTHER TECHNICAL DATA LISTED IN THIS TDPL.

2. THIS TDPL IS COMPRISED OF THE FOLLOWING SECTIONS WHICH LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE, PACKAGE AND INSPECT THE MATERIAL BEING PRODUCED. (NA INDICATES NOT APPLICABLE)

FROM TO

A. PRODUCT DRAWINGS AND ASSOCIATED LISTS ........................................ 0001 0001 B. PACKAGING DRAWINGS AND DOCUMENTS ............................................ 0002 0003 C. INSPECTION DRAWINGS AND DOCUMENTS ........................................... 0004 0004 D. SPECIFICATIONS AND STANDARDS ............................................... 0005 0013 E. HAZARDOUS COMPONENT SAFETY DATA STATEMENTS ................................. 0014 0014 F. OUTSTANDING APPROVED ENGINEERING CHANGES .................................... 0015 0015 G. TDPL NOTE LEGEND ............................................................ 0016 0016

3. DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS LISTED IN THE ABOVE TDPL SECTIONS ARE IDENTIFIED AS TO TYPE BY PREFIX CODES AS FOLLOWS:

DX: SOURCE CONTROL LI: LIST OF EL'S

NC: NON CATEGORIZED SPEC PD: PACKAGING DATA SHEET

PE: PERFORMANCE SPEC PK: PACKAGING SPEC

QS: SUPPLEMENTAL QUALITY ASSURANCE PROVISION SD: HAZARDOUS SAFETY DATA SHEET

4. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDPL IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE REVISION OR AMENDMENT FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDPL. SUPERCEDED SPECIFICATIONS AND STANDARDS WHICH MAYBE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERCEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDPL. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL

PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE.

5. ALL REFERENCES ON DRAWINGS/DOCUMENTS AND ASSOCIATED LISTS TO PICATINNY, FRANKFORD OR ROCK ISLAND ARSENALS WILL BE CONSIDERED AS CHANGED TO COMMANDER, ARDEC, ATTN: RDAR-EIS-P BUILDING 12 ROOM 4, PICATINNY, NJ 07806-5000

6. ALL REFERENCES TO PARTS LISTS ON US ARMY TANK AUTOMOTIVE COMMAND (TACOM) DRAWINGS SHALL BE DISREGARDED

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND COVER SHEET 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

TDPL COVER SHEET RELEASED BY:

7. THE HIGHEST SECURITY CLASSIFICATION CONTAINED WITHIN THIS TECHNICAL DATA PACKAGE IS:

"N NON-CLASSIFIED

THE SECURITY CLASSIFICATION OF DRAWINGS/DOCUMENTS, ASSOCIATED LISTS AND SPECIFICATIONS/STANDARDS ARE SHOWN BY CODE UNDER

THE SEC CL COLUMN.

8. DISTRIBUTION STATEMENT: THE MOST RESTRICTIVE DISTRIBUTION STATEMENT CONTAINED WITHIN THIS TDPL IS:

"D DISTR STATEMENT D - DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY

PER DODI 5230.24, CHANGE 1, 2016, ALLOWABLE DISTRIBUTION STATEMENTS ARE:

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

DISTRIBUTION STATEMENT B: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES (REASON) (DATE OF DETERMINATION).

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT C: DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR CONTRACTORS (REASON) (DATED OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DoD CONTRACTORS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT E: DISTRIBUTION AUTHORIZED TO DoD COMPONENTS ONLY (REASON) (DATE OF DETERMINATION). OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO (CONTROLLING DoD OFFICE).

DISTRIBUTION STATEMENT F: FURTHER DISSEMINATION ONLY AS DIRECTED BY (CONTROLLING OFFICE) (DATE OF DETERMINATION) OR HIGHER DoD AUTHORITY.

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 1

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PRODUCT DRAWING AND ASSOCIATED LISTS

E 19200 12579607 001 0001 A C 08/04/2009 GEOMETRIC SYMBOLS F/DIMENSIONING TOLERANCING

C 81361 13-10-10 001 0001 D AK 06/06/2013 PIN, HINGE

C 81361 13-10-13 001 0001 D AN 08/28/2013 STRIKER ASSEMBLY

C 81361 13-10-14 001 0001 D AA 06/06/2013 STRIKER

C 81361 13-10-15 001 0001 D AD 06/06/2013 POINT, STRIKER

C 81361 13-10-19 001 0001 D AH 12/20/2013 GASKET (FOUO)

D 81361 13-10-22 001 0001 AC 00/00/0000 13-10-22

D 81361 13-10-5 001 0001 P 05/26/1988 LEVER

D 81361 13-10-54 001 0001 B 08/16/1990 CASE

C 81361 13-10-55 001 0001 D F 06/06/2013 IGNITER COMPOSITION

C 81361 13-10-56 001 0001 F 00/00/0000 13-10-56 D 81361 13-10-57 001 0001 C 00/00/0000 13-10-57

C 81361 13-10-8 001 0001 D AK 06/11/2013 SPRING

C 81361 13-10-9 001 0001 AG 08/08/1988 RING, PULL

C 19203 8798919 001 0001 A M 08/30/2013 PRIMER, PERCUSSION M39A1 ASSEMBLY

B 19203 8798920 001 0001 A E 07/14/2005 ANVIL

C 19203 8798921 001 0001 A E 07/14/2005 BODY

B 19203 8798922 001 0001 A H 11/06/2014 CUP

A 19203 8798923 001 0001 A F 11/06/2014 DISC

B 19203 9278188 001 0001 A D 06/12/2013 PRIMER MIXTURE

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 2

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PACKAGING DRAWINGS AND DOCUMENTS

D 19200 10521856 001 0001 A F 07/13/2016 SYMBOLS, IDENT MARKINGS NATO; AMMO BOXES REF C 19200 12977298 001 0001 A D 06/24/2015 PROCEDURES METALLIC SEAL WIRE APPLICATIO

A 19200 12982865 001 0001 A L 04/18/2019 MINIMUM MKG INSTR AMMO EXPLOSIVE CNTNR

A 19200 12999545 001 0001 A J 01/26/2018 TWO-DIM BARCODE AMMO LABEL INSTRUCTIONS

PD A 81361 13-10-22 001 0001 A C 08/13/2007 13-10-22

D 81361 13-10-37 001 0001 N 12/24/2002 MARKING DIAGRAM

D 81361 13-9-66 001 0001 D V 08/01/2007 PACKAGING FUZE (FOR 70 FUZES)

C 81361 13-9-69 001 0001 D R 05/18/2007 TRAY

C 81361 13-9-70 001 0001 D P 05/18/2007 SEPARATOR

F 19200 13023613 001 0001 A A 08/08/2013 PKG & MKG BOX WB FUZE HAND GRENADE:M213 M228 REF

DX C 19200 13060578 001 0001 A - 02/13/2017 PRESERVATIVE, WOOD

A 19200 13064136 001 0001 A B 06/26/2018 WOOD PACKING MATERIAL, PRESERVATIVE TREA A 28620 1948-4115 001 0001 A 01 07/01/1981 LOADING & BRACING (CL&LCL) IN BOX CARS OF BOXED A

A 28620 1948-4116 001 0001 A 13 01/01/2017 UNITIZATION PROC F/BOXED AMMO

A 28620 1948-4116/71 001 0001 A 03 05/01/2015 UNIT PROC BXED AMMO,FUZE,HAND GRENADE,M228

28620 1948-4116/71C *** 0000 ** 00/00/0000 *** DEFICIENCY ***

A 28620 1948-4117 001 0001 A 02 04/01/1993 LOADING & BRACING (TL&LTL) IN CLOSED OR OPEN TOP A 28620 1948-4118 001 0001 A 02 01/01/1994 STORAGE IN APPROVED MAGAZINES OF BOXED AMMO A 28620 1948-4153 001 0001 A 01 06/01/1994 LOADING & BRACING W/WOODEN DUNNAGE IN END OPENING A 28620 1948-4166 001 0001 A 01 10/01/1989 LOADING & BRACING IN MILVAN CNTNRS OF BOXED AMMO

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 3

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

PACKAGING DRAWINGS AND DOCUMENTS

A 28620 1948-4267 001 0001 A - 11/01/1993 LOADING & BRACING W/WOODEN DUNNAGE IN SIDE OPENIN

D 19203 8794342 001 0001 A AM 03/28/2019 SEAL, METALLIC

D 19203 8796522 001 0001 A BU 04/26/2017 MARKING DIAGRAM SEALING WOOD PKG BOXES

C 19203 9325874 001 0001 A K 01/26/2018 PACKING FOR LIGHT BOXES

D 28620 ACV00561 001 0001 A G 01/26/2018 UNIT LOAD MARKING F/SHIP STORAGE AMMO

DX C 28620 ACV00617 001 0001 A D 06/13/2013 SEALLESS COMB TOOL FOR 3/4" STEEL STRAP D 28620 ACV00831 001 0001 A - 03/01/2010 HEAT TREATMENT OF WOODEN PALLET,SKIDS,FILLER ASSY

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 4

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

INSPECTION DRAWINGS AND DOCUMENTS

QS A 81361 13-10-13 001 0001 D - 02/26/1974 STRIKER ASSEMBLY

E 81361 24-13-186 001 0001 D B 09/17/1991 BENCH TYPE OPTICAL COMPARATOR

C 81361 5220-A50-6733 001 0001 D C 11/26/1974 TEMPLATE GAGE

C 81361 5220-A50-6734 001 0001 D D 03/07/1991 STAGING FIXTURE...CNX PER S1C3012

A 81361 5220-A50-9820 001 0001 D D 08/24/1979 DEFINITIONS FOR INSPECTION EQUIPMENT CODING REF

QS A 19203 8794342 001 0001 A C 07/27/1998 SEAL, METALLIC

LI A 19203 8798919 001 0001 A C 03/29/1965 PRIMER, PERCUSSION M39A1 ASSEMBLY

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 5

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-DTL-51353 D F 01/26/2016 FUZES,HG,FLOATING SMOKE POT/INCENDIARY

MIL-F-51353 (REPLACED BY MIL-DTL-51353 ) *

MIL-DTL-51353 D F 01/26/2016 FUZES,HG,FLOATING SMOKE POT/INCENDIARY

TB700-2 A A 07/30/2012 DOD AMMO EXPL HAZARD CLASSIFICATION

A-A-00208 D 10/01/2013 INK,MARKING,STENCIL,OPAQUE(POROUS/NON-POROUS) *

A-A-208 (REPLACED BY A-A-00208 ) *

A-A-00208 D 10/01/2013 INK,MARKING,STENCIL,OPAQUE(POROUS/NON-POROUS) *

TT-I-1795 (REPLACED BY A-A-00208 ) *

A-A-1507 A A 2 02/02/2000 CHIPBOARD *

A-A-1558 A A 2 11/12/2009 PAINT, STENCIL *

A-A-3174 A - 5 11/21/2018 PLASTIC SHEET, POLYOLEFIN *

A-A-55057 A B 1 08/12/2019 PANELS, WOOD/WOOD BASED, CONSTRUCTION *

A-A-55057 A B 1 08/12/2019 PANELS, WOOD/WOOD BASED, CONSTRUCTION *

NN-P-530 (REPLACED BY A-A-55057 ) ***

A-A-59383 C 1 01/31/2017 MARKING MEDIA,OPAQUE(POROUS/NON-POROUS SURFACES) *

AR-740-1 - 09/26/2008 STORAGE & SUPPLY ACTIVITY OPERATIONS *

AR740-1 - 08/26/2008 STORAGE SUPPLY ACTIVITY OPERATIONS *

DOD-4100.39 - 10/01/2010 FLIS PRICEDURE MAN MULTIPLE APPL & REFE *

DOD-4145.26 M 08/31/2018 DOD CONTRACTORS SAFETY MANUAL FOR AMMO *

DOD-4500.9-R - 01/03/2007 DEFENSE TRANSPORTATION REG PART 1 PASSENGER MOVE *

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 6

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

DODD-6050.05 - 06/10/2019 DOD HAZARD COMMUNICATION(HAZCOM)PROGRAM *

DOD-6050.5 (REPLACED BY DODD-6050.05 ) *

FED-STD-123 H 08/08/2007 MARKING FOR DOMESTIC SHPT/CIVILIAN AGENCIES *

FED-STD-H28 A B 1 04/24/2019 SCREW-THREAD STD F/FEDERAL SERVICE *

FF-S-2738 A 1 2 07/12/2018 SEALS, ANTIPILFERAGE *

JAN-G-479 A - 5 05/01/2014 GLASS,GROUND(ORDNANCE USE)...NFND *

MIL-A-2550 A B 1 2 10/18/2013 AMMUNITION, GENERAL SPEC FOR...NFND *

MIL-B-162 D 3 2 03/14/1997 BARIUM NITRATE...NFND *

MIL-C-13739 A A 1 3 08/08/2013 COMPOSITION, DELAY *

Q MIL-DTL-11195 A H 1 08/23/2016 ENAMEL, LUSTERLESS, FAST DRY, VOC COMP *

MIL-L-11195 (REPLACED BY MIL-DTL-11195 ) *

MIL-DTL-11414 A F 1 04/24/2018 PRIMER,ALKYD,FAST DRY,CORROSION INHIBITING *

MIL-P-11414 (REPLACED BY MIL-DTL-11414 ) *

MIL-DTL-117 A H 2 2 08/29/2019 BAGS, HEAT-SEALABLE *

MIL-DTL-150 A E 08/05/2008 POTASSIUM CHLORATE, TECHNICAL...NFND *

MIL-DTL-15011 A K 1 03/31/2017 PALLETS, MATERIAL HANDLING, WOOD POST-CONSTRUCT *

MIL-DTL-2427 A J 03/29/2017 BOX, AMMUNITION PACKING: WOOD, NAILED *

MIL-DTL-248 A D 1 1 03/12/2013 TRINITROTOLUENE (TNT) *

MIL-DTL-45449 A C 2 1 05/16/2017 PALLET,UNITS,WOOD,F/SHPT OF PJCTL METAL PARTS/PJ *

MIL-DTL-46506 A E 3 10/31/2016 BOXES,AMMUNITION PACKING,WOOD,WIREBOUND *

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 7

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-G-10944 B 3 1 01/11/2013 GAGES, DIMENSIONAL CONTROL...NFND *

MIL-HDBK-1461 A A 3 07/12/2018 AMMO MANUFACTURERS AND THEIR SYMBOLS *

MIL-L-51292 C 2 07/13/2004 LAUNCHER/GRENADES,SMOKE,HC AND WP,XM176...NFND *

MIL-L-65 A A 2 05/15/2014 LEAD THIOCYANATE(SULPHOCYANATE)...NFND *

MIL-M-21383 A 2 09/28/1995 MANGANESE DELAY COMPOSITION *

MIL-P-12951 F 1 4 04/01/2008 PRIMER, PERCUSSION, M39A1 PARTS FOR LAP *

MIL-P-217 A 1 5 04/18/2014 POTASSIUM PERCHLORATE...NFND *

MIL-P-22264 A 1 2 09/08/2003 POWDER, IGNITION, GASLESS, A-1A *

MIL-P-60169 B 5 10/10/2013 PAPER, SEALING...NFND *

MIL-PRF-61002 A B 2 06/05/2013 PRESSURE-SENSITIVE ADHESIVE LABELS *

MIL-STD-1168 A C 1 02/21/2019 AMMUNITION LOT NUMBER AMMO DATA CARD *

MIL-STD-1234 - 5 08/29/2013 PYROTECHNICS, SAMPLING, INSPECT TESTING *

MIL-STD-129 R 2 09/27/2019 MILITARY MARKINGS F/SHIPMENT/STORAGE *

MIL-STD-130 A N 1 08/26/2019 IDENTIFICATION MARKING OF U.S. MILITARY *

MIL-STD-1660 A 08/07/2008 DESIGN CRITERIA AMMUNITION UNIT LOADS *

MIL-STD-171 A F 05/31/2011 FINISHING OF METAL AND WOOD SURFACES *

MIL-STD-1916 A - 2 06/05/2014 DOD PREFER MTHDS F/ACCEPTANCE PRODUCT *

MIL-STD-2073-1 A E 4 04/22/2019 STANDARD PRACTICE F/ MILITARY PACKAGES *

MIL-STD-31000 A B 10/31/2018 TECHNICAL DATA PACKAGES *

DOD-D-1000 (REPLACED BY MIL-STD-31000 ) ***

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 8

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

MIL-STD-331 A D 05/31/2017 FUZES,IGNITION SAFETY DEVICES,PERF TESTS *

MIL-T-13405 A E 1 3 10/01/2015 TITANIUM,TECHNICAL POWDER...NFND *

MIL-V-16399 A 2 05/31/2006 VARNISH,MOISTUREPROOF *

MIL-V-50433 - 3 11/13/2013 VINYL ALCOHOL-ACETATE RESIN SOLUTION...NFND *

NAVSUP-PUB-505-CH-1 - 04/15/2007 TRANSPORT PREP HAZ MATERIALMIL AIR SHIPM *

STANAG-2953 - 02/17/2017 IDENTIFICATION OF AMMO - AOP-2(C) ED 3 *

TM38-250 - 12/11/2001 PREPARING HAZARDOUS MATERIALS F/MILITARY AIR SHI *

TM743-200-1 - 05/04/1978 HANDLING EQUIPMENT-CHANGES 1-22 *

TT-C-490 A G 09/09/2019 CHEMICAL CONVERSION COATINGS *

AFMAN24-204 - 10/12/2004 PREPARING HAZ MATERIALS MIL AIR SHIPMENT **

AMCR-385-100 - 1 09/26/1995 SAFETY MANUAL **

ASME-B46.1 A - 01/01/2009 SURFACE TEXTURE **

ASME-B46.1 A - 01/01/2009 SURFACE TEXTURE **

ANSI-B46.1 (REPLACED BY ASME-B46.1 ) **

ASME-Y14.100 A - 11/14/2017 ENGINEERING DRAWING PRACTICES **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ASME-Y14.5M (REPLACED BY ASME-Y14.5 ) **

ASME-Y14.5 A - 01/01/2018 DIMENSIONING AND TOLERANCING **

ANSI-Y14.5 (REPLACED BY ASME-Y14.5 ) **

ASTM-A108 - 11/01/2018 STANDARD SPEC F/STEEL BAR **

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 9

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-A109/A109M - 11/01/2018 STANDARD SPEC FOR STEEL, STRIP, CARBON **

ASTM-A228/A228M - 09/01/2018 STANDARD SPEC F/STEEL WIRE **

ASTM-A576 - 11/01/2017 STANDARD SPEC STEEL BARS, HOT-WROUGHT **

ASTM-A641/A641M - 09/01/2019 STANDARD SPEC FOR ZINC-COATED (GALV) **

ASTM-A853 - 09/01/2019 STANDARD SPEC F/STEEL WIRE, CARBON **

ASTM-B117 - 08/01/2018 STANDARD PRAC F/SALT OPER SALT SPRAY **

ASTM-B19 - 05/01/2015 CARTRIDGE BRASS SHEET,STRIP,PLATE,BAR,DISK **

ASTM-B36/B36M - 10/01/2018 BRASS PLATE,SHEET,STRIP AND ROLLED BAR **

ASTM-B633 - 03/01/2019 ELECTRODEPOSITED COATINGS ZINC IRON STEEL **

ASTM-B633 - 03/01/2019 ELECTRODEPOSITED COATINGS ZINC IRON STEEL **

QQ-Z-325 (REPLACED BY ASTM-B633 ) ***

ASTM-D1974/D1974M - 10/01/2016 STANDARD PRACTICE/METHODS CLOS,SEALING **

ASTM-D2582 - 04/01/2016 STANDARD TEST METH F/PUNCTURE-PROPAGATION **

ASTM-D329 - 06/01/2013 STANDARD SPECIFICATION FOR ACETONE **

ASTM-D329 - 06/01/2013 STANDARD SPECIFICATION FOR ACETONE **

O-A-51 (REPLACED BY ASTM-D329 ) ***

ASTM-D360 - 11/01/2012 SHELLAC VARNISHES **

ASTM-D3950 - 09/01/2017 STANDARD SPECIFICATION F/STRAPPING **

ASTM-D3953 - 05/01/2015 STANDARD SPEC F/STRAPPING FLAT STEEL/SEALS **

ASTM-D3953 - 05/01/2015 STANDARD SPEC F/STRAPPING FLAT STEEL/SEALS **

QQ-S-781 (REPLACED BY ASTM-D3953 ) ***

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 10

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-D4727/D4727M - 04/01/2017 CORRUGATED SOLID FIBERBOARD SHT STOCK **

ASTM-D4727 (REPLACED BY ASTM-D4727/D4727M ) **

ASTM-D4727/D4727M - 04/01/2017 CORRUGATED SOLID FIBERBOARD SHT STOCK **

PPP-F-320 (REPLACED BY ASTM-D4727/D4727M ) ***

ASTM-D5118/D5118M - 10/01/2015 FABRICATION FIBERBOARD SHIPPING BOXES **

ASTM-D5118 (REPLACED BY ASTM-D5118/D5118M ) **

ASTM-D5118/D5118M - 10/01/2015 FABRICATION FIBERBOARD SHIPPING BOXES **

PPP-B-636 (REPLACED BY ASTM-D5118/D5118M ) ***

ASTM-D5486/D5486M - 04/01/2012 STAND SPEC F/PRESSURE SENSITIVE TAPE **

ASTM-D5486 (REPLACED BY ASTM-D5486/D5486M ) **

ASTM-D5486/D5486M - 04/01/2012 STAND SPEC F/PRESSURE SENSITIVE TAPE **

PPP-T-76 (REPLACED BY ASTM-D5486/D5486M ) ***

ASTM-D6199 A A 10/01/2018 STANDARD PRACTICE QUALITY WOOD MBRS **

ASTM-D6251/D6251M A - 08/01/2019 STANDARD SPEC F/WOOD-CLTD PANEL BD **

PPP-B-601 (REPLACED BY ASTM-D6251/D6251M ) *

ASTM-D6251/D6251M A - 08/01/2019 STANDARD SPEC F/WOOD-CLTD PANEL BD **

ASTM-D6251 (REPLACED BY ASTM-D6251/D6251M ) **

ASTM-D7932 - 09/01/2017 PRINTED, PRESSURE-SENSITIVE ADHESIVE LAB **

ASTM-D882 - 08/01/2018 STANDARD TEST METHOD TENSILE PROPERTIES **

ASTM-E11 - 04/01/2017 STANDARD SPEC WIRE-CLOTH SIEVES **

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 11

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ASTM-E8/E8M A 08/01/2016 STANDARD TEST METHOD F/TENSION TESTING **

ASTM-F1667 A A 12/01/2018 STANDARD SPEC DRIVEN FASTENERS **

FF-N-105 (REPLACED BY ASTM-F1667 ) ***

ASTM-F1667 A A 12/01/2018 STANDARD SPEC DRIVEN FASTENERS **

AWPA-A11 A - 12/10/1987 TREATED WOOD & TREATING SOLUTIONS BY ATOMIC ABSO **

AWPA-A21 - 01/01/2016 ANALYSIS OF WOOD & WOOD TREATING SOLUTIO **

AWPA-A28 - 01/01/2014 DETERMINATION OF PROPICONAZOLE & TEBUCON **

AWPA-A31 - 01/01/2015 ANALYSIS OF SOLUTIONS & WOOD F/AZOLES BY **

AWPA-A40 - 01/01/2013 DETERMINATION OF BORON TRIOXIDE IN TREAT **

AWPA-A41 - 01/01/2012 DETERMINATION OF NAPHTHENIC ACID IN COPP **

AWPA-A43 - 01/01/2014 ANALYSIS OF IMIDACLOPRID IN WOOD & WATER **

AWPA-A48 - 01/01/2015 ANALYSIS OF PROPRICONAZOLE, TEBUCONAZOLE **

AWPA-A64 - 01/01/2017 DETERMINE AMOUNT OF BORON TRIOXIDE IN SO **

AWPA-A88 - 01/01/2012 DETERMINATION OF COPPER CONTENT OF COPPE **

AWPA-A9 - 01/01/2016 ANALYSIS OF TREATED WOOD & TREATING SOLU **

CFR-29 - 07/01/2011 OCCUPATIONAL SAFETY, HEALTH STANDARDS **

DISA-X12.3 - 01/01/1992 ELECTRONIC BUSINESS DATA INTERCHANGE **

IATA-DGR - 01/01/2016 DANGEROUS GOODS REGULATIONS **

ICAO-9284 - 01/01/2015 TECHNICAL INSTR SAFE TRANSPORT DANGEROUS **

ISO-IEC-15434 - 02/01/2019 INFO-TECH TRANSFER SYNTAX HIGH CAPACITY **

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 12

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

ISO-IEC-15438 - 09/15/2015 INFORMATION TECH-AUTO IDENT, DATA **

ISPM-15 - 01/01/2009 INTERNATIONAL STANDARD F/PHYTOSANITARY MEASURES **

MHI-MH10.8.2 - 01/01/2016 DATA IDENTIFIER/APPLICATION IDENTIFIER STD **

PARTS100-199 - 10/01/2012 CODE OF FEDERAL REGULATIONS, TITLE 49 **

PARTS100-199 - 10/01/2012 CODE OF FEDERAL REGULATIONS, TITLE 49 **

CFR-49 (REPLACED BY PARTS100-199 ) **

PS-20 - 06/01/2010 AMERICAN SOFTWOOD LUMBER STANDARD **

SAE-AMS-STD-595 A 02/01/2017 COLORS USED IN GOVERNMENT PROCUREMENT **

FED-STD-595 (REPLACED BY SAE-AMS-STD-595 ) ***

SAE-AMS-STD-595 A 02/01/2017 COLORS USED IN GOVERNMENT PROCUREMENT **

ASTM-A621/A621M - 03/10/1997 STEEL...WDRN...W/O REPLACEMENT ***

ASTM-A621 (REPLACED BY ASTM-A621/A621M ) **

MIL-STD-100 G 1 12/14/2001 STANDARD...CNX...SEE NOTICE F/SUG SOURCE ***

DOD-STD-100 (REPLACED BY MIL-STD-100 ) *

MIL-STD-105 A E 3 02/06/2008 SAMPLING...CNX...SEE NOTICE F/SUG SOURCE ***

MIL-STD-109 A C 1 05/31/1995 QUALITY...CNX...SEE NOTICE F/SUG SOURCE ***

R MIL-STD-1235 A - 04/16/1997 SAMPLING PROC...CNX...W/O REPLACEMENT ***

MIL-T-12879 A 2 07/18/1991 TREATMENTS...CNX...REFER TO ASTM-D6386 ***

MM-L-751 H 1 04/28/1997 SOFTWOOD...CNX...REFER TO PS-20 ***

QQ-A-225 G 1 04/07/1998 ALUMINUM...CNX...SEE NOTICE F/SUG SOURCE ***

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 13

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

QPL DOCUMENT D REV AMD CHG SUPPL DOCUMENT SEC DOCUMENT TITLE NOTE

CODE NUMBER C SYM NO. NO. NO. DATE

SPECIFICATIONS AND STANDARDS

QQ-A-225/7 D 2 04/07/1998 ALUMINUM...CNX...SEE NOTICE F/SUG SOURCE ***

QQ-A-250 F 2 05/26/2005 ALUMINUM...CNX...SEE NOTICE F/SUG SOURCE ***

QQ-A-250/8 F 3 05/26/2005 ALUMINUM...CNX...SEE NOTICE F/SUG SOURCE ***

QQ-W-461 H 12/13/1988 STEEL..CNX..SEE NOTICE F/SUG SOURCE ***

QQ-Z-363 A B 2 04/30/1992 ZINC...CNX...REFER TO ASTM-B86 ***

RR-S-366 E 1 05/01/1997 SIEVE...CNX...SEE NOTICE F/SUG SOURCE ***

Q TT-P-664 D 1 03/13/2020 PRIMER...CNX...USE SSPC-PAINT25(DISC) ***

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 14

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT -SHEET- D REV DOCUMENT SEC DOCUMENT TITLE NOTE

CODE SIZE CAGE NUMBER NO OF C SYM DATE

HAZARDOUS COMPONENT SAFETY AND DATA STATEMENTS

SD A 19200 117 001 0001 C B 06/14/1983 ZIRCONIUM POWDER

SD A 19200 1281 001 0001 C B 02/19/1980 PRIMER MIXTURE, F/M39A1 PRIMER

SD A 19200 1842 001 0001 C B 05/15/1987 PYROTECHNIC COMP MANGANESE DELAY (BACRO4

SD A 19200 1860 001 0001 C - 07/25/1983 ASSY DELAY CRTG F/M201A1E2 HAND GRENADE

SD A 19200 20001 001 0001 E 06/30/1989 FUZE, HAND GRENADE, M201A1

SD A 19200 20060 001 0001 C A 07/15/1986 COMPOSITION,IGNITER(Ti/KC104)

SD A 19200 20307 001 0001 - 06/30/1989 CARTRIDGE, DELAY ASSEMBLY F/M201A1 FUZE

SD A 19200 2738 001 0001 C A 01/22/2015 FUZE, HAND GRENADE, M201A1

SD A 19200 2739 001 0001 C A 01/22/2015 CARTRIDGE, DELAY ASSY, f/M201A1 FUZE

SD A 19200 4 001 0001 C G 05/01/1991 BARIUM NITRATE

SD A 19200 512 001 0001 C B 10/18/1984 NICKEL POWDER (SS HMIS DOD 6050.5.L)

SD A 19200 52 001 0001 C E 02/04/1993 BARIUM CHROMATE

SD A 19200 53 001 0001 C E 03/30/1993 POTASSIUM PERCHLORATE

SD A 19200 585 001 0001 C G 04/16/2010 PYROTECHNIC COMP IGNITER(A1A)(ZR/FE2O3/D

SD A 19200 68 001 0001 C G 07/06/1987 PYROTECHNIC COMPOSITION DELAY (BACRO4/KC

SD A 19200 69 001 0001 C B 07/18/1983 ZIRCONIUM NICKEL ALLOY

SD A 19200 71 001 0001 C E 03/30/1993 PRIMER PERCUSSION M39A1

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 15

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT AFFECTED NUMBER OF ECP DISTRIBUTION APPROVAL CHANGE

CODE CAGE NUMBER IMAGES NUMBER CODE DATE CLASS

OUTSTANDING APPROVED ENGINEERING CHANGES

NOTE - THE FOLLOWING ENGINEERING DOCUMENTS ARE AFFECTED BY APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) WHICH HAVE NOT BEEN INCORPORATED INTO THE AFFECTED DOCUMENTS. THE APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) IDENTIFIED BELOW ARE INCLUDED

WITH AND FORM A PART OF THIS TECHNICAL DATA PACKAGE

DR 81361 13-10-22 1 S0C3127 11/30/1990 1

DR 81361 13-10-22 1 S0C3138 12/13/1990 2

DR 81361 13-10-22 1 S9C3141 06/12/1989 1

DW 81361 13-10-37 1 779-002 05/13/1976 2

DR 81361 13-10-56 1 S9C3184 10/20/1989 1

DR 81361 13-10-56 1 S9C3227 11/21/1989 1

DW 81361 13-9-66 1 779-002 05/13/1976 2

DE 81361 5220-A50-9820 1 S8L3005 D 03/11/1988 2

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 16

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

TDPL NOTE LEGEND

DESCRIPTION OF SYMBOLS IN THE NOTE LEGEND

* -Not Furnished - To be obtained from Defense Logistics Agency (DLA) Document Services, http://quicksearch.dla.mil or https://assist.dla.mil

** -Not Furnished - Commercial specifications and standards may be obtained from the publishers. They are not available from government sources.

*** -Not Furnished - Supplied only upon request submitted to the procuring contract officer.

**** -Not Furnished - Supplied only by request to program/project manager.

REF - Reference Drawing.

Q - The Letter (Q) before the specification number indicates that a qualified products list is required. The number of the QPL is the same as the number of the specification

CS - Computer Software Document - The print of this drawing included in the technical data package is not to be used for manufacture. A computer software program on CD, DVD or via a website or FTP will be furnished by the procuring contracting officer upon request.

SB - Stable Base Drawing - The print of this drawing included in the technical data package is not to be used for manufacture. A stable master will be furnished by the procuring contracting officer upon request.

G - Government Furnished Equipment or Material.

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 17

CAGE 19200

WORKSHEET FOR : 13-10-22:81361 REQUEST TYPE :

DOCUMENT NUMBER : REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT ECP/RFD/RFW REV AMD ECP/RFD-W PRIORITY CHG CONFIGURATION ITEM SUMMITTAL APPROVAL CHANGE

CODE CAGE NUMBER NUMBER DATE PREPARED CODE CAT NOMENCLATURE TYPE TYPE CLASS

DP 81361 13-10-10 LIGHT-P 07/31/1989 R LIGHT-P E 2

DP 81361 13-10-5 LIGHT-P 07/31/1989 R LIGHT-P E 2

NC NCAGE ASTM-A576 CHEK-SM 08/24/1989 R CHEK-SM E 2

NC NCAGE MIL-C-13739 HAZIOC 01/04/1999 R HAZIOC F 2

NC NCAGE MIL-L-65 HAZIOC 01/04/1999 R HAZIOC F 2

PE NCAGE MIL-P-12951 HAZIOC 01/04/1999 R HAZIOC F 2

NC NCAGE MIL-V-50433 DMSMS 05/02/2002 R DMSMS F 2

NC NCAGE QQ-Z-363 CASTING 08/01/1989 R CASTING E 2

NC NCAGE TT-C-490 LIGHT-P 07/31/1989 R LIGHT-P E 2

*** THIS TDPL HAS NOT BEEN VALIDATED ***

11/19/2019 ARMAMENT CENTER - U.S. ARMY COMBAT CAPABILITIES DEVELOPMENT COMMAND SHEET NO 18

CAGE 19200

TECHNICAL DATA PACKAGE LIST: 13-10-22:81361

DOCUMENT NUMBER : D 13-10-22:81361

SPECIFICATION : MIL-F-51353

NATIONAL STOCK NO : 1330-00-293-9516

FUZE, HAND GRENADE M201A1 REQUEST/PRON ID: 4I9A09O1M2

PREFIX DRAWING/DOCUMENT AFFECTED AFFECTED ECP DISTRIBUTION APPROVAL CHANGE

CODE CAGE NUMBER SHEET NO NUMBER CODE DATE CLASS

WEB OUTSTANDING APPROVED ENGINEERING CHANGES

NOTE - THE FOLLOWING ENGINEERING DOCUMENTS ARE AFFECTED BY APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) WHICH HAVE NOT BEEN INCORPORATED INTO THE AFFECTED DOCUMENTS. THE APPROVED ENGINEERING CHANGE PROPOSALS (ECPS) IDENTIFIED BELOW ARE INCLUDED

WITH AND FORM A PART OF THIS TECHNICAL DATA PACKAGE

DR 81361 13-10-22 S0C3127 11/30/1990 1

DR 81361 13-10-22 S0C3138 12/13/1990 2

DR 81361 13-10-22 S9C3141 06/12/1989 1

DW 81361 13-10-37 779-002 05/13/1976 2

DR 81361 13-10-56 S9C3184 10/20/1989 1

DR 81361 13-10-56 S9C3227 11/21/1989 1

DW 81361 13-9-66 779-002 05/13/1976 2

DE 81361 5220-A50-9820 002 S8L3005 D 03/11/1988 2