RFI__24_-_Remote_Fill_Station_EarthSafe.pdf

earth safe Fuel Systems for Critical Power

General Description Fill System for Tanks in Buildings. The Earthsafe M400 Compact Fill Station is designed for the safe filling of fuel tanks located inside buildings. The system is designed to install outside the building to accept fuel from delivery trucks and safely transfer fuel to the fuel tank in the building.

Overfill Prevention Safety. The system is designed with overfill prevention safety. The electronic controller at the fill station monitors the fuel level in the tank as a continuous level reading (0-100%) or as a set of high level sensors (85-90-95%). The controller provides audible and visual high level warning at 85%, high level alarm at 90%, and critical high level at 95%. The controller monitors the position of actuated fill pipe valves, and closes the valve upon high level.

Single or Multi-Tank Systems. The Earthsafe Compact Fill Station will provide safe filling for a single or multiple fuel storage tanks. In multiple tank systems the controller monitors level sensors in each tank and operates an actuated valve to allow filling of the selected tank.

Passive or Pump Equipped. The fill station is most commonly used with pump equipped fuel delivery trucks.

Where facility based pumps are required, the fill station can be equipped with pumps from 30 to 300 GPM (120-1200LPM) capacity.

Earthsafe M400 Compact Fill Station with Integral OmniPlex Network Controller

BACnet, Modbus, Metasys N2, or LON Communications

Compact F i l l S tat ion wi th Integra l OmniP lex Network Contro l ler earth safe Fuel Systems for Critical Power

Earthsafe M400

M410 Compact Tank Fill Station (shown) M415 Compact Tank Fill Station – Pump Flow

Mounting Options: Flow Options:

Surface Mount Manual Valve Flush Mount Auto Valve Recess Mount Pump Flow

Dimensions

Tank Select

Flow Capacity (GPM)

Pressure Capacity

Pump Type (PP350)

Accessories

Construction

Controls

24”Wx24”Hx18”D (610x610x460) (610x610x460)

1-4 Tanks

20 GPM (80 LPM)

100 PSI (690 kPa)

Viking PD Pump Close Coupled TEFC Motor 120 VAC Single Phase, or 480-240 VAC Three Phase

1.0 HP @ 25 PSI (0.75 KW)

Camlock Connection (2” • 3”) (50-75) Outlet Check Valve Shutoff Valve Leak Sensor Hand Pump Tank High Level Sensor Motor Starter / Disconnect High Level Shutoff Valve

Welded Steel Construction Containment Basin (7 GAL) (30L) Industrial Enamel Finish Color RAL 7035 (Light Gray) Option: Weatherproof Enclosure Option: SS Construction Option: Wall Recess Construct

C840 Omniplex Module earth safe Fuel Systems for Critical Power

Earthsafe M400

T: (630) 794-5100 info@earthsafe.com F: (630) 794-5106 www.earthsafe.com

7320 S. Madison Willowbrook, IL 60527

Earthsafe Systems, Inc.

Compact F i l l S tat ion wi th Integra l OmniP lex Network Contro l ler

Tank Fill System

Item Qty Description

1 1 OmniPlex Control Panel

10 2 Tank Level Sensor

24 2 Actuated Butterfly Valve

34 1 Fill Station Cabinet

58 1 Butterfly Valve

80 1 Hose Adapter / Cap

81 1 Hand Pump Assembly

Tank Fill Control:

The control panel monitors a high level sensor in the fuel tank and controls the opening of the actuated valve in the fill pipe. The tank to be filled is selected at the control panel. The fill line valve is energized to open, as long as the tank level is less than 85%. The fill valve limit switch provides feedback to the panel, so that when filling multiple tanks only one valve is open at any one time.

Fuel is transferred into the tank until the 85% tank level is reached and an audible alarm is activated. The audible alarm operates for 60 seconds, or until reset. Alarms are reset by placing the tank selector in the OFF position. At 90% fill level the alarm is re-activated and the fill pipe valve is closed. The valve may be opened in the manual mode up to 95%, at which point the valve is closed and disabled.