E006 CMP (Change).pdf

ADRL Number: E 0 0 6

System/Item

LASSO

OTA No:

TBD

Vendor:

TBD

Title Configuration Management Plan (CMP)

Data Item Description (DID) No:

DI-SESS-80858D and DI-SESS-81253

SOO Reference:

Milestone 2, Milestone 3, 5.1.2.,5.1.3, and 5.1.4.

DD 250 Req

No

Distribution Statement

Required D

Date of First

Submission

See Remarks

Date of Subsequent

Submission See Remarks

Remarks:

The Draft CMP shall be delivered at Milestone 2 and Final, No Later Milestone 3.

The Government has 15 business days to provide either review comments, or document disapproval, or document approval after receipt.

If Government review comments are provided, or the document is disapproved, the Vendor shall resubmit updated version no later that 10 business days after receipt of Government’s comments.

Distribution

Addressee

Copies

Draft Final

Hard copy

Soft copy

Hard copy

Soft copy

SFAE-SDR-SWAR-SPTD 1 1

Total

Title

Configuration Management Plan (CMP)

Data Item Description (DID) Number

DI-SESS-80858D and DI-SESS-81253

Description

The Configuration Management Plan provides a detailed plan of the Configuration Management methods and procedures that the Vendor will be used to maintain the configuration of the system(s) procured under this contract. The CMP describes in detail how the Vendor’s Configuration Management (CM) program is implemented for the effort; how CM is organized; how CM will be conducted; methods, procedures and controls that effect configuration identification, identification, change control, status accounting and audits of the total configuration, including hardware and software. The principal use is to provide the Army with a basis for review, evaluation and monitoring of the Vendor CM program, and its proposed components.

Preparation Instructions

Format:

Vendor format acceptable. Documents shall be compatible with Windows and Microsoft Office 2016 products (i.e., Word, Excel, PowerPoint, etc.) MS Project Professional 2019 and MS 365 formatted files.

The Vendor shall use, as guidance, DI-SESS-80858D “Supplier’s Configuration Management Plan” and MIL-HDBK- 61 “Configuration Management Guidance” in the preparation of the CMP.

Export Control Act Warning (Required Warning):

This document may contain technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended.

Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

Security Markings:

Shall contain DISTRIBUTION STATEMENT D: Distribution authorized to Department of Defense and U.S. DoD Vendors only. Date of determination is date product is generated. Other requests for this document shall be referred to the attention of the Product Manager Soldier Precision Targeting Devices, SFAE-SDR-IVAS-SPTD, 5966 12th Street, Bldg. 1024, Fort Belvoir, VA 22060-5512.

Content The content of the CMP shall define the technical and administrative guidelines for change control, status accounting, and audits of the hardware and software configuration of the system(s). Also included shall be the implementation of the use of firmware, relative to Vendor test stations. The Vendor shall submit electronic engineering change control documents for DD1692 Engineering Change Proposal, DD1695 Notice of Revision, and

DD1696 Specification Change Notice.

The plan shall address, but not be limited to:

• Vendor Configuration Management Program

• System Configuration Identification

• System Configuration Control

• System Engineering Change Order (ECO – internal to Vendor) and Engineering Change Process (ECP)

Preparation and Processing

• System Configuration Status Accounting