SF243-D004.pdf

Standard Form PDF 54 KB Posted

Download PDF, 54 KB

Attached to
Nitramine Cost Reduction Development
Solicitation number
SF243-D004
Issued by

About this file

This document is a Statement of Objectives (SOO) for a Defense Advanced Research Projects Agency (DARPA) Small Business Innovation Research (SBIR) contract opportunity designated SF243-D004: Nitramine Cost Reduction Development. The solicitation seeks to develop pilot-production methods for synthesizing precursor materials and input materials for CL-20 production that can scale to 500 kilograms while reducing material cost. Offerors must demonstrate control over purity, particle size, and crystal morphology through synthetic techniques including nitration, polymerization, or recrystallization, with capability to purify materials from sub-quality feedstocks and produce precursor materials with sufficient yields or reduced costs. The technology falls under ITAR restrictions (22 CFR Parts 120-130) and EAR controls (15 CFR Parts 730-774), requiring disclosure of any proposed foreign nationals' involvement and their intended work tasks.

This is a Direct to Phase II (D2P2) SBIR opportunity with three phases. Phase I requires proposers to provide evidence of technology maturity for D2P2 based on previous experimental data with nitrated precursor/input materials. Phase II focuses on developing and demonstrating pilot-scale processes achieving polymorph control, narrow particle size distribution, high purity, and cost reduction, with deliverables including a full technical data package and transition plan to achieve Technology Readiness Level 4-5. Phase III addresses dual-use applications requiring transition to production capacity with full-rate manufacturing capability, achieving Technology Readiness Level 7-8 and establishing a pilot production line for high-performance nitramine precursors through continental U.S. sources. No CMMC level requirement applies. No Technical Point of Contact is listed. References provided include peer-reviewed literature on explosives and propellants synthesis.

View the file

Other versions and copies of SF 243

File Revision Posted Attached to
SF243-D013.pdf Revision not stated CCDM (Camouflage, Concealment, Deception, and Maneuver) Interrogation
SF243-D012.pdf Revision not stated Foreign Space Launch Detection
SF243-0003.pdf Revision not stated Reentry Events and Impact Location Prediction
SF243-D002.pdf Revision not stated Low Earth Orbit Space Domain Awareness Optical Fence
SF243-D011.pdf Revision not stated Launch Cycle Initiation Detection
SF243-D017.pdf Revision not stated Advancing Expeditionary Space Domain Awareness
SF243-D008.pdf Revision not stated RETURN (Returning ExoaTmospheric Unique Research is Novel)
SF243-0004.pdf Revision not stated Responsible Space Behavior Event Classification
SF243-D003.pdf Revision not stated Characterization and Typing of Hard-to-Acquire Targets using Advanced Machine Learning Methods on WFOV Staring Data
SF243-D009.pdf Revision not stated ASAT Launch Detection and Threat Assessment
SF243-D016.pdf Revision not stated Tactical High Orbit Fast Transfer
SF243-0001.pdf Revision not stated Event Based Data Fusion for Temporal Super Resolution in Image Based Tracking
SF243-D018.pdf Revision not stated Space Sustainment & Maneuver: Advancing Strategic Superiority in Orbital Operations
SF243-D010.pdf Revision not stated Object Transiting Tracking
SF243-D006.pdf Revision not stated Future Space Architectures through Advanced Mission Design and In-Space Development Platforms
SF243-D014.pdf Revision not stated Responsive, Radiation-hardened GEO Rideshare Capability
SF243-D015.pdf Revision not stated Advancing Space Capabilities for Joint Warfighting Opportunities
SF243-0002.pdf Revision not stated Spectral-Binning Focal Plane Array for Infrared Spectroscopy
SF243-D001.pdf Revision not stated Manufacturing of New Nosetip Materials for Reentry Vehicles
SF243-D005.pdf Revision not stated Event-Based Sensor Readout Integrated Circuit
Show all 20

Who attaches SF 243

Other files

File Type Posted
AF_SBIR_243_DP2_v4.pdf PDF

On GovTribe

Work with this file

  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SF243-D004: Nitramine Cost Reduction Development

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Materials | Space Platforms

MODERNIZATION PRIORITIES:

Advanced Materials | Hypersonics | Space Technology

KEYWORDS:

Precursor; energetic material; nitramine; explosives; chemical production; synthesis optimization; cost reduction

ADDITIONAL INFORMATION

N/A

OBJECTIVE:

Design, develop and demonstrate a pilot-production method (~1 kg) for synthesizing precursor material(s) and/or input material(s) for CL-20 production that can scale up to 500 kg with a reduction in material price point.

Showcase the ability to control purity, particle size, and crystal morphology (if applicable) for each material generated through synthetic techniques such as nitration, polymerization, or recrystallization. Developed processes shall be capable of purifying materials from sub-quality feedstocks and produce precursor materials with sufficient yields or reduced cost.

ITAR:

The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.

DESCRIPTION:

Energetic materials are multi-use materials used in private industry, recreational sport, and military applications.

Explosives are typically produced at a large-scale, where industrial production facilities range from a couple of pounds to millions of pounds of material each year. Explosives are usually separated by classes (particle granulation sizes) and are produced in accordance with various material specifications that include purity, particle size distributions, and morphology. Since WWII, the US energetics community has relied on a handful of materials as the cornerstones of its explosive arsenal. Combining the high-quality performance metrics of legacy materials, the current existing infrastructure, and their inexpensive production cost, it is logical as to why the energetic community continues to turn to these materials.

Despite increases in performance compared to legacy energetic materials, the explosive CL-20 has struggled to mature into practical use in US propulsion technology. Various factors, such as complex synthesis pathways, difficult to source precursor/input materials, demanding reaction conditions, difficult purification methods, or limited infrastructure has limited CL-20’s ability to achieve a footing in the US industrial base. As a result, the same fuel sources have continued to be the go-to choice for US propulsion technologies as fuels leveraging modern CL- 20 continue to economically fall short of legacy materials, limiting the business case to mature modern materials.

To invest in maturing modern propulsion technologies, this proposal seeks possible partners that are able to develop production techniques for yield, purity, morphology control for precursor/input materials of CL-20.

Maturation of precursor/input materials will not only affect the overall synthesis of the energetic but will reduce the cost to manufacture CL-20, possibly becoming competitive with legacy propulsion energetics on the large scale. With a more defined, cost effective, and commercially viable production pathway for CL-20 precursors/input materials, the propulsion community may begin to develop novel formulations leveraging this higher performing nitramine material. This topic seeks to fund proposals that can develop robust synthetic routes with reduced production cost of CL-20 precursors and/or input materials.

PHASE I:

In the last 40 years, CL-20 has historically been up to 10x the cost of legacy explosives, causing manufacturers to have little desire to mature this chemical into a cornerstone manufacturing material. However, because CL-20 was developed in up to 40 years ago, extensive research and development into its synthesis optimization and various synthesis pathways has been investigated. The precursor/input materials required for synthesis are well known and mature, but few have expanded on optimizing these materials to large-scale production due to their poor economical return at the production scale. However, with a new demand for higher performing nitramines, the economical reason to further mature CL-20 precursor/input materials have taken shape. To capitalize on the increased performance of CL-20, with a known precursor/input material base, a focused effort must be made to further mature their development into large production.

As this is a Direct to Phase II (D2P2) SBIR, proposers should provide evidence showing that their technology is mature enough for D2P2. Evidence should stem from previous experimental data generating nitrated precursor/input materials or other high-performance nitramines with a maturity level near ready pilot-scale production.

PHASE II:

Develop and demonstrate one or more pilot-scale processes for CL-20 precursor/input material production.

Production pathways should exhibit polymorph control (if applicable) and narrow particle size distribution and control along with high purity of precursor/input material generated. Additionally, the process should factor in scalability, limited operator exposure, hazardous waste generation, and show process control measures such as solvent recycling. The process should be applicable to large-scale chemical manufacturing environments and showcase an ability to decease production costs. CL-20 precursor/input materials must be shipped to a DoD customer lab for further evaluation of product quality. Phase 2 deliverables will mature precursor/input material synthesis to a technology readiness level of 4-5, demonstrating the ability to manufacture prototype material in a production relevant environment. The phase will conclude with a full technical data package and transition plan that documents synthetic procedures and achieves consistent reproducibility and cost reduction over current industry processes.

PHASE III DUAL USE APPLICATIONS:

One or more of the processes developed in Phase 2 should be transitioned and scaled to production capacity.

These processes will demonstrate the ability to control purity, polymorph (if applicable), and particle size distributions of the precursor/input materials chosen. The precursor/input material should also be taken through the rest of the synthesis pathway to demonstrate the ability to produce energetic materials. The input material process from Phase III should be scalable and transition-able to integrate into full-rate chemical production plants. The processes delivered will diminish the production risk and manufacturing cost to meet potential energetic or propellant production surge demand. The Phase III activity should mature the Phase II production methodology of precursor/input material to technology readiness level of 7-8 to demonstrate the ability to establish a Pilot line that can begin full rate production of selected precursor materials. At the conclusion of the research activity, there will be infrastructure and technology investments in place that can consistently manufacture high performance nitramine precursors through CONUS sources to feed into production lines.

REFERENCES:

Nielsen, A, et al. J. Org. Chem. 1990, 55, 1459–1466.1.

Peng, C, et al. Chin. J. Explosives & Propellants. 2022, 45, 3, 290-299.2.

Bayat, Y., Taheripouya, G., Zeynali, V., Azizkhani, V. J. Energetic Materials. 2023. 1-35.3.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .