Nitramine Cost Reduction Development
Closed Solicitation Posted
- Solicitation number
- SF243-D004
- Agency
-
Air Force Materiel Command
Air Force, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Department of the Air Force Materiel Command seeks proposals for Nitramine Cost Reduction Development, a Direct-to-Phase-II SBIR topic (SF243-D004) for pilot-production methods that synthesize CL-20 precursor and input materials, with proposals due October 23, 2024. The set-aside is Total Small Business, and the topic is ITAR-controlled. As of November 17, 2026, that deadline has passed.
Eligibility filters include exclusion of firms majority-owned by multiple venture capital operating companies, hedge funds, or private equity funds. Offerors must disclose any proposed foreign nationals' involvement and their intended work tasks. Export-controlled topics require DD Form 2345 in Volume 5. All work must be performed in the United States, with the awardee performing a minimum of two-thirds of the research effort.
Technical requirements call for a pilot-production method of about 1 kg that scales to 500 kg at a lower material price point. Offerors must control purity, particle size, and crystal morphology through nitration, polymerization, or recrystallization, and must purify materials from sub-quality feedstocks. Phase I-type feasibility must be substantially performed by the applicant outside prior SBIR/STTR funding. Direct-to-Phase-II proposals must show technology maturity based on prior experimental data with nitrated precursor or input materials. Phase II targets Technology Readiness Level 4-5, with a full technical data package and transition plan. Phase III targets Technology Readiness Level 7-8 and a pilot production line using continental U.S. sources.
Proposals are submitted electronically through DSIP. Offerors must register in SAM with a Unique Entity ID and obtain a CAGE code. The proposal has six volumes: a DoD cover sheet, a technical volume limited to 35 pages (20 pages for specific topics), a cost volume, a commercialization report, supporting documents, and a fraud, waste, and abuse training certification. The technical volume must include a milestone schedule, Phase II objectives, work plans, deliverables, and commercialization plans.
Across the 18 topics in this 24.3 Direct-to-Phase-II solicitation, award values range from $1.8 million to $3.0 million, with performance periods of 15 to 24 months. Proposals receive competitive subject matter expert evaluation that considers security risk assessments covering foreign affiliations, cybersecurity practices, and patent analysis. Evaluation completes within approximately 90 calendar days of solicitation closure. The notice is classified under NAICS 541715 and PSC AC12.
Notice text
DoD SBIR topic SF243-D004
Component: USAF
Command: AFMC
Phase: SBIR Program Phase II Action
Technology Areas: Materials; Space Platforms
Focus Areas: Advanced Materials; Hypersonics; Space Technology
Keywords: Precursor; energetic material; nitramine; explosives; chemical production; synthesis optimization; cost reduction
ITAR: Yes
Objective:
Design, develop and demonstrate a pilot-production method (~1 kg) for synthesizing precursor material(s) and/or input material(s) for CL-20 production that can scale up to 500 kg with a reduction in material price point. Showcase the ability to control purity, particle size, and crystal morphology (if applicable) for each material generated through synthetic techniques such as nitration, polymerization, or recrystallization. Developed processes shall be capable of purifying materials from sub-quality feedstocks and produce precursor materials with sufficient yields or reduced cost.
Description:
Energetic materials are multi-use materials used in private industry, recreational sport, and military applications. Explosives are typically produced at a large-scale, where industrial production facilities range from a couple of pounds to millions of pounds of material each year. Explosives are usually separated by classes (particle granulation sizes) and are produced in accordance with various material specifications that include purity, particle size distributions, and morphology. Since WWII, the US energetics community has relied on a handful of materials as the cornerstones of its explosive arsenal. Combining the high-quality performance metrics of legacy materials, the current existing infrastructure, and their inexpensive production cost, it is logical as to why the energetic community continues to turn to these materials.
Despite increases in performance compared to legacy energetic materials, the explosive CL-20 has struggled to mature into practical use in US propulsion technology. Various factors, such as complex synthesis pathways, difficult to source precursor/input materials, demanding reaction conditions, difficult purification methods, or limited infrastructure has limited CL-20’s ability to achieve a footing in the US industrial base. As a result, the same fuel sources have continued to be the go-to choice for US propulsion technologies as fuels leveraging modern CL-20 continue to economically fall short of legacy materials, limiting the business case to mature modern materials.
To invest in maturing modern propulsion technologies, this proposal seeks possible partners that are able to develop production techniques for yield, purity, morphology control for precursor/input materials of CL-20. Maturation of precursor/input materials will not only affect the overall synthesis of the energetic but will reduce the cost to manufacture CL-20, possibly becoming competitive with legacy propulsion energetics on the large scale. With a more defined, cost effective, and commercially viable production pathway for CL-20 precursors/input materials, the propulsion community may begin to develop novel formulations leveraging this higher performing nitramine material. This topic seeks to fund proposals that can develop robust synthetic routes with reduced production cost of CL-20 precursors and/or input materials.
Phase I:
In the last 40 years, CL-20 has historically been up to 10x the cost of legacy explosives, causing manufacturers to have little desire to mature this chemical into a cornerstone manufacturing material. However, because CL-20 was developed in up to 40 years ago, extensive research and development into its synthesis optimization and various synthesis pathways has been investigated. The precursor/input materials required for synthesis are well known and mature, but few have expanded on optimizing these materials to large-scale production due to their poor economical return at the production scale. However, with a new demand for higher performing nitramines, the economical reason to further mature CL-20 precursor/input materials have taken shape. To capitalize on the increased performance of CL-20, with a known precursor/input material base, a focused effort must be made to further mature their development into large production.
As this is a Direct to Phase II (D2P2) SBIR, proposers should provide evidence showing that their technology is mature enough for D2P2. Evidence should stem from previous experimental data generating nitrated precursor/input materials or other high-performance nitramines with a maturity level near ready pilot-scale production.
Phase II:
Develop and demonstrate one or more pilot-scale processes for CL-20 precursor/input material production. Production pathways should exhibit polymorph control (if applicable) and narrow particle size distribution and control along with high purity of precursor/input material generated. Additionally, the process should factor in scalability, limited operator exposure, hazardous waste generation, and show process control measures such as solvent recycling. The process should be applicable to large-scale chemical manufacturing environments and showcase an ability to decease production costs. CL-20 precursor/input materials must be shipped to a DoD customer lab for further evaluation of product quality. Phase 2 deliverables will mature precursor/input material synthesis to a technology readiness level of 4-5, demonstrating the ability to manufacture prototype material in a production relevant environment. The phase will conclude with a full technical data package and transition plan that documents synthetic procedures and achieves consistent reproducibility and cost reduction over current industry processes.
Phase III:
One or more of the processes developed in Phase 2 should be transitioned and scaled to production capacity. These processes will demonstrate the ability to control purity, polymorph (if applicable), and particle size distributions of the precursor/input materials chosen. The precursor/input material should also be taken through the rest of the synthesis pathway to demonstrate the ability to produce energetic materials. The input material process from Phase III should be scalable and transition-able to integrate into full-rate chemical production plants. The processes delivered will diminish the production risk and manufacturing cost to meet potential energetic or propellant production surge demand. The Phase III activity should mature the Phase II production methodology of precursor/input material to technology readiness level of 7-8 to demonstrate the ability to establish a Pilot line that can begin full rate production of selected precursor materials. At the conclusion of the research activity, there will be infrastructure and technology investments in place that can consistently manufacture high performance nitramine precursors through CONUS sources to feed into production lines.
Files
| File | Type | Posted |
|---|---|---|
| AF_SBIR_243_DP2_v4.pdf | ||
| SF243-D004.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| US Production of Ultra-High Temperature Ceramic-Yielding Preceramic Polymers | Air Force Materiel Command | Total Small Business | |
| Shallow Jet Spurt Engineering Model | Air Force Materiel Command | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity