Spectral-Binning Focal Plane Array for Infrared Spectroscopy

Closed Solicitation Posted

Solicitation number
SF243-0002
Agency
Responses due
Set-aside
Total Small Business

Opportunity facts

More information

Notice details come from DoD SBIR/STTR (DSIP). Updated .

About this opportunity

The Department of the Air Force Materiel Command seeks Phase I proposals under DoD SBIR topic SF243-0002 for a spectral-binning focal plane array for infrared spectroscopy, with proposals due October 23, 2024, a date that has passed as of November 17, 2026. The solicitation is set aside for Total Small Business and is ITAR-controlled, so proposers must disclose any foreign nationals with their visa status and intended tasks.

The array must intrinsically resolve spectra to measure the spectral characteristics of targets and target simulators, augmenting the spectral sensing of the space simulation chambers at Arnold Air Force Base's Space Systems Test Facility, operated by AEDC. The objective specifies a 1.5 to 12 micrometer range, while the technical description specifies 1.5 to 14 micrometers. Spectral resolution is 0.1 micrometers (threshold) or 0.05 micrometers (objective), throughput is 10 spectra per second (threshold) or 100 (objective), and average quantum efficiency is 0.5. The device must operate in a low-temperature (20 K), high-vacuum environment.

Per the attached Phase I instructions summary, the maximum contract value is $180,000 over a six-month performance period. Proposals are submitted through the Defense SBIR/STTR Innovation Portal, with a 20-page technical volume limit and seven required volumes. The awardee must perform at least two-thirds of the research effort, measured by direct and indirect costs excluding profit, and subcontracts are capped at one-third of total contract cost excluding profit. All research must occur in the United States unless the DAF approves a deviation in writing. The DAF conducts security risk assessments on all proposals under 15 USC 638(vv). Small businesses majority-owned by multiple venture capital firms, hedge funds, or private equity funds are ineligible. Phase II is limited to Phase I awardees.

Notice text

DoD SBIR topic SF243-0002

Component: USAF

Command: AFMC

Phase: SBIR Program Phase I Action

Technology Areas: Space Platforms

Focus Areas: Microelectronics; Quantum Science

Keywords: cryo-vacuum; infrared spectral calibration; infrared detectors; focal plane arrays; infrared spectrometers, imaging sensors; imaging sensor testing; space simulation

ITAR: Yes

Objective:

Development of a sensitive infrared focal plane array (FPA) that intrinsically resolves spectra over the spectral range 1.5 to 12 µm to be used in place of conventional high-speed spectrometers for measuring the spectral characteristics of targets and target simulators. The FPA must provide varying spectral response across one axis, with the other axis used for summation of radiation signal output for each spectral response bin.

Description:

The space simulation chambers of the Space Systems Test Facility (SSTF) at Arnold Air Force Base facilitate the testing of high-performance interceptors and surveillance sensors in a low background radiation (20 K) environment, as well as making spectral signature measurements of aerospace structures. These facilities offer support for developmental and operational Test and Evaluation (T&E) of aerospace systems. To provide the needed spectral measurement capability, a cryo-vacuum-compatible compact spectrometer is needed to augment the spectral sensing capability of AEDC’s space simulation chambers, as well as provide technology advancement for similar venues throughout DoD. Such a spectral measurement system must operate in a low temperature, high vacuum environment and provide spectral data for point measurements of a targets using a collimating optical system. The spectral system should range from 1.5 to 14 µm with a spectral resolution of 0.1 (threshold) or 0.05 µm (objective), capable of 10 spectra per second (threshold) or 100 per second (objective) and an average quantum efficiency of 0.5. The goal is an FPA (or suite of FPAs) that inherently spectrally resolves the incident light so that, for example, a vertical row of pixels is sensitive only to a narrow spectral band of light would be summed to measure the signal within that narrow spectral band. Each subsequent vertical row increments spectrally so that across orthogonal axis of the FPA the full spectral range can be measured. The goal is to avoid conventional spectral dispersing elements or narrow band filters over the detection elements, or mechanical positioners that are problematic in terms of speed or reliability. The objective of this topic is to develop this FPA to accomplish spectral binning without a conventional dispersive element through the use of nanolithographic design and manufacturing techniques. However, other innovative concepts will be considered. This has the potential to be a technology development that could be extended to the area of hyperspectral scene projectors.

Proposals include detailed risk mitigation strategies by addressing potential challenges in developing and integrating the advanced FPA technology. Also, methodologies should be defined for testing and validation at critical junctures to ensure a clear and robust path to successful implementation.

Phase I:

Demonstrate a proof-of-concept spectral FPA that has a format of 128 x 128 pixels and provides 0.1 µm resolution across the LWIR spectral range. Implement, expound upon and refine, as necessary, the proposed risk mitigation strategies mentioned in the Topic Description. Provide a plan for Phase II testing and validation of the prototype FPA technology in the AEDC Space Systems Test Facility laboratory early enough to allow refinements to ensure a clear and robust path to successful implementation.

Phase II:

Develop, demonstrate and deliver a prototype infrared spectral FPA that has a format of 256 x 256 pixels and provides 0.05 µm resolution across its spectral range (1.5 to 14 µm). The product could be a suite of FPAs that can cover the desired spectral range. Implement the proposed testing and validation of the prototype at AEDC to allow modifications as necessary for successful implementation to the Space Systems Facility prior to the end of the Phase II effort.

Phase III:

Phase III efforts would be directed towards larger FPA formats with higher resolution spectral performance. Instrumentation incorporating this type of technology would be useful in many DoD venues involved in calibration, characterization, and mission performance testing of imaging sensor systems.

Files

File Type Posted
SF243-0002.pdf PDF
AF_SBIR_243_PhaseI_v2.pdf PDF

Similar open opportunities

On GovTribe

Work this opportunity

  • Track it in your pipeline
  • Find teaming partners
  • Similar opportunities
  • Ask GovTribe AI about this opportunity

GovTribe for Federal Contractors