SF243-0002.pdf

Standard Form PDF 53 KB Posted

Attached to
Spectral-Binning Focal Plane Array for Infrared Spectroscopy
Solicitation number
SF243-0002
Issued by

About this file

This is a federal contract topic for small business innovation research (SBIR) solicitation focused on developing infrared spectral detection technology for the Department of Defense.

The topic SF243-0002 seeks development of a spectral-binning focal plane array (FPA) for infrared spectroscopy applications in the 1.5 to 12 micrometer range, with objective performance including 0.05 micrometer spectral resolution, 100 spectra per second capability, and 0.5 average quantum efficiency. The technology must operate in cryo-vacuum environments (20 Kelvin) at the Space Systems Test Facility at Arnold Air Force Base and replace conventional high-speed spectrometers for measuring spectral characteristics of targets and target simulators. Phase I requires demonstration of a proof-of-concept 128x128 pixel FPA with 0.1 micrometer resolution across the long-wave infrared range, including detailed risk mitigation strategies and a testing plan for Phase II validation at AEDC. Phase II requires development and delivery of a prototype 256x256 pixel FPA providing 0.05 micrometer resolution across the full 1.5 to 14 micrometer spectral range, potentially as a suite of arrays, with testing and validation conducted at AEDC prior to Phase II completion. Phase III dual-use applications would focus on larger FPA formats with enhanced spectral resolution for DoD calibration, characterization, and imaging sensor system testing. The technology is ITAR-restricted, requiring disclosure of any proposed foreign nationals and their intended work tasks. No technical point of contact is identified, and no CMMC level requirement applies. The solicitation emphasizes nanolithographic design and manufacturing techniques or other innovative approaches to achieve spectral binning without conventional dispersive elements.

View the file

Other versions and copies of SF 243

File Revision Posted Attached to
SF243-D013.pdf Revision not stated CCDM (Camouflage, Concealment, Deception, and Maneuver) Interrogation
SF243-D012.pdf Revision not stated Foreign Space Launch Detection
SF243-0003.pdf Revision not stated Reentry Events and Impact Location Prediction
SF243-D002.pdf Revision not stated Low Earth Orbit Space Domain Awareness Optical Fence
SF243-D011.pdf Revision not stated Launch Cycle Initiation Detection
SF243-D017.pdf Revision not stated Advancing Expeditionary Space Domain Awareness
SF243-D008.pdf Revision not stated RETURN (Returning ExoaTmospheric Unique Research is Novel)
SF243-0004.pdf Revision not stated Responsible Space Behavior Event Classification
SF243-D003.pdf Revision not stated Characterization and Typing of Hard-to-Acquire Targets using Advanced Machine Learning Methods on WFOV Staring Data
SF243-D009.pdf Revision not stated ASAT Launch Detection and Threat Assessment
SF243-D016.pdf Revision not stated Tactical High Orbit Fast Transfer
SF243-0001.pdf Revision not stated Event Based Data Fusion for Temporal Super Resolution in Image Based Tracking
SF243-D018.pdf Revision not stated Space Sustainment & Maneuver: Advancing Strategic Superiority in Orbital Operations
SF243-D010.pdf Revision not stated Object Transiting Tracking
SF243-D006.pdf Revision not stated Future Space Architectures through Advanced Mission Design and In-Space Development Platforms
SF243-D014.pdf Revision not stated Responsive, Radiation-hardened GEO Rideshare Capability
SF243-D004.pdf Revision not stated Nitramine Cost Reduction Development
SF243-D015.pdf Revision not stated Advancing Space Capabilities for Joint Warfighting Opportunities
SF243-D001.pdf Revision not stated Manufacturing of New Nosetip Materials for Reentry Vehicles
SF243-D005.pdf Revision not stated Event-Based Sensor Readout Integrated Circuit
Show all 20

Who attaches SF 243

Other files

File Type Posted
AF_SBIR_243_PhaseI_v2.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SF243-0002: Spectral-Binning Focal Plane Array for Infrared Spectroscopy

PROJECTED CMMC LEVEL REQUIREMENT:

N/A

TECHNOLOGY AREAS:

Space Platforms

MODERNIZATION PRIORITIES:

Microelectronics | Quantum Science

KEYWORDS:

cryo-vacuum; infrared spectral calibration; infrared detectors; focal plane arrays; infrared spectrometers, imaging sensors; imaging sensor testing; space simulation

ADDITIONAL INFORMATION

N/A

OBJECTIVE:

Development of a sensitive infrared focal plane array (FPA) that intrinsically resolves spectra over the spectral range 1.5 to 12 µm to be used in place of conventional high-speed spectrometers for measuring the spectral characteristics of targets and target simulators. The FPA must provide varying spectral response across one axis, with the other axis used for summation of radiation signal output for each spectral response bin.

ITAR:

The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with section 3.5 of the Announcement. Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.

DESCRIPTION:

The space simulation chambers of the Space Systems Test Facility (SSTF) at Arnold Air Force Base facilitate the testing of high-performance interceptors and surveillance sensors in a low background radiation (20 K) environment, as well as making spectral signature measurements of aerospace structures. These facilities offer support for developmental and operational Test and Evaluation (T&E) of aerospace systems. To provide the needed spectral measurement capability, a cryo-vacuum-compatible compact spectrometer is needed to augment the spectral sensing capability of AEDC’s space simulation chambers, as well as provide technology advancement for similar venues throughout DoD. Such a spectral measurement system must operate in a low temperature, high vacuum environment and provide spectral data for point measurements of a targets using a collimating optical system. The spectral system should range from 1.5 to 14 µm with a spectral resolution of 0.1 (threshold) or 0.05 µm (objective), capable of 10 spectra per second (threshold) or 100 per second (objective) and an average quantum efficiency of 0.5. The goal is an FPA (or suite of FPAs) that inherently spectrally resolves the incident light so that, for example, a vertical row of pixels is sensitive only to a narrow spectral band of light would be summed to measure the signal within that narrow spectral band. Each subsequent vertical row increments spectrally so that across orthogonal axis of the FPA the full spectral range can be measured. The goal is to avoid conventional spectral dispersing elements or narrow band filters over the detection elements, or mechanical positioners that are problematic in terms of speed or reliability. The objective of this topic is to develop this FPA to accomplish spectral binning without a conventional dispersive element through the use of nanolithographic design and manufacturing techniques. However, other innovative concepts will be considered. This has the potential to be a technology development that could be extended to the area of hyperspectral scene projectors.

Proposals include detailed risk mitigation strategies by addressing potential challenges in developing and integrating the advanced FPA technology. Also, methodologies should be defined for testing and validation at critical junctures to ensure a clear and robust path to successful implementation.

PHASE I:

Demonstrate a proof-of-concept spectral FPA that has a format of 128 x 128 pixels and provides 0.1 µm resolution across the LWIR spectral range. Implement, expound upon and refine, as necessary, the proposed risk mitigation strategies mentioned in the Topic Description. Provide a plan for Phase II testing and validation of the prototype FPA technology in the AEDC Space Systems Test Facility laboratory early enough to allow refinements to ensure a clear and robust path to successful implementation.

PHASE II:

Develop, demonstrate and deliver a prototype infrared spectral FPA that has a format of 256 x 256 pixels and provides 0.05 µm resolution across its spectral range (1.5 to 14 µm). The product could be a suite of FPAs that can cover the desired spectral range. Implement the proposed testing and validation of the prototype at AEDC to allow modifications as necessary for successful implementation to the Space Systems Facility prior to the end of the Phase II effort.

PHASE III DUAL USE APPLICATIONS:

Phase III efforts would be directed towards larger FPA formats with higher resolution spectral performance.

Instrumentation incorporating this type of technology would be useful in many DoD venues involved in calibration, characterization, and mission performance testing of imaging sensor systems.

REFERENCES:

Nicholson, R.A., Mead, K.D., and Lowry, H.S., “Radiometric Calibration and Mission Simulation Testing of Sensor Systems in the AEDC 7V and 10V Chambers,” SPIE Proceedings, Vol. 6208-46 (2006).

1.

McGovern, W.R., et.al., “Metal-mesh optical filter technology for mid-IR, far-IR, and submillimeter,” SPIE Proc. Vol. 8385, 838506 (2012).

2.

Le Perchec, J., et.al., “High rejection bandpass optical filters based on sub-wavelength metal patch arrays,” Optics Express, Vol. 19, No. 17, 15 Aug 2011.

3.

Fan, K, and Padilla, W.J., “Dynamic electromagnetic metamaterials,” Materials Today, Vol. 18, No. 1, Jan/Feb 2015, Dynamic electromagnetic metamaterials - ScienceDirect.

4.

Jiang, S., Li, J., Lai, J., Yi, F., “Metamaterial microbolometers for multi-spectral infrared polarization imaging,” Opt Express, 2022 Mar 14, 30(6):9065-9087.doi: 10.1364/OD.45298, Metamaterial microbolometers for multi-spectral infrared polarization imaging - PubMed (nih.gov).

5.

TECHNICAL POINT OF CONTACT (TPOC):

None

File details come from the government source that posted it. Updated .