Event-Based Sensor Readout Integrated Circuit
Closed Solicitation Posted
- Solicitation number
- SF243-D005
- Agency
-
Air Force Materiel Command
Air Force, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 541715 Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)
- More information
Notice details come from DoD SBIR/STTR (DSIP). Updated .
About this opportunity
The Department of the Air Force Materiel Command seeks development of a radiation-hardened Event-Based Sensor readout integrated circuit under DoD SBIR topic SF243-D005, with proposals due October 23, 2024. The set-aside is Total Small Business, and the technology is ITAR-restricted, so offerors must disclose any proposed use of foreign nationals.
The Phase II prototype must use a pixel unit size of 30 micrometers or smaller, with desired 10 and 20 micrometer options, and an array format of 320 x 256 or larger that scales to 2 MPixel arrays or larger. The design must be usable across all three infrared bands (1-1.7, 3-5, and 8-12 micrometers) in both p-on-n and n-on-p configurations, at an operating temperature of 60-240 Kelvin. It must be radiation-hardened for latch-up, single event upset, and total ionizing dose. Performance targets include pixel latency under 10 microseconds, timing accuracy of 1 microsecond, event stream support of 10^9 events per second or greater, 10 milliwatts static-scene power, and 100 milliwatts dynamic-scene power at 80 Kelvin. Phase II requires delivery of prototypes at relevant format sizes achieving Technology Readiness Level 4, plus a Draft Interface Control Document and an insertion plan for a test dewar.
The companion Direct-to-Phase II instructions require a Phase I-type feasibility study performed substantially by the applicant and/or Principal Investigator, independent of prior or ongoing SBIR/STTR funding. The Principal Investigator must maintain primary employment with the proposing small business, and all research and development must be performed in the United States. Applicants must hold an active UEI in SAM and complete Fraud, Waste, and Abuse training before submission. Proposals are submitted through the Defense SBIR/STTR Innovation Portal, and the technical volume is limited to 35 pages.
Those instructions cover 18 space-related topics with awards from $1.8 million to $3.0 million and performance periods of 15 to 24 months. Evaluation weighs technical merit, feasibility, and commercialization potential, with multiple awards anticipated and selections expected within approximately 90 calendar days of solicitation close. The opportunity is classified under NAICS 541715 and PSC AC12.
Notice text
DoD SBIR topic SF243-D005
Component: USAF
Command: AFMC
Phase: SBIR Program Phase II Action
Technology Areas: Sensors; Space Platforms
Focus Areas: Integrated Sensing and Cyber; Space Technology
Keywords: Event Based Sensor; neuromorphic imaging; ROIC; Infrared; read out integrated circuit design; focal plane array design; FPA
ITAR: Yes
Objective:
This topic seeks to develop a radiation hardened Event-Based Sensor (EBS) readout integrated circuit (ROIC) with small pixel pitch, large format, and the ability to hybridize to commonly available infrared detector material.
Description:
Infrared EBS may offer many advantageous capabilities to Intelligence, Surveillance, and Reconnaissance (ISR) missions. Many tracking applications produce extremely high data rates (>10 GBps) that could be drastically reduced using a properly designed infrared EBS. An EBS accomplishes this goal by asynchronously recording data when a change in the pixel irradiance is detected. An EBS ROIC design could also enable reduced background data generation rates with novel design choices. The scope of this project is to design a prototype EBS ROIC demonstrating a signal-integrating unit cell, lower data rates, and downstream asynchronous handshake logic to provide actionable information on scene movement. This design will be optimized for Air Force needs and will be directly compared to a standard framing ROIC to provide a deeper understanding of the image scene and motion detection algorithms.
The key optimization parameters are as follows. The pixel unit size shall be 30 um or smaller, with a desire for options at 10 um and 20 um to match existing optics. The array format shall be 320 x 256 or larger for demonstration purposes, with the ability to scale to 2 MPixel arrays or larger. All three infrared bands (i.e. 1-1.7 um, 3-5 um, and 8-12 um) shall be usable under this design, including both p-on-n and n-on-p designs. To support all of these designs, the ROIC operating temperature shall be 60 – 240 K. The ROIC shall be radiation-hardened for latch-up, single event upset, and total ionizing dose. The ROIC shall also have an integrating mode to compare with its EBS mode.
EBS-specific parameters include the latency, timing accuracy, event rate, and power consumption. The pixel latency shall be less than 10 microseconds and the timing accuracy shall be 10x better (i.e. 1 microsecond). The ROIC shall support event streams of 109 events per second or greater, with a static scene power consumption of 10 mW and a dynamic scene power consumption of 100 mW. These are for operation at 80 K.
Contractor shall deliver a Draft ICD and insertion plan into a test dewar for demonstration by the end of Phase II.
Phase I:
To demonstrate Phase I-type feasibility, applicant(s) must demonstrate the following:
- Unit level devices in relevant IR or Visible bands.
- Preliminary designs for a prototype device.
- Items should be suitable for Technology Readiness Level 2.
Phase II:
Prototype devices at relevant format sizes will be constructed and tested for relevant specifications. Tests will be performed against relevant metrics. A final packaged system will be produced that meets the specifications and is suitable for Technology Readiness Level 4. Preliminary designs will be made for phase III device.
Phase III:
A field test ready version of the design will be built from a compact and lightweight design and with standard interfaces. A field test ready version shall be robust to intended environments. Manufacturing process will be evaluated and refined to improve yield while reducing cost.
Files
| File | Type | Posted |
|---|---|---|
| SF243-D005.pdf | ||
| AF_SBIR_243_DP2_v4.pdf |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| High Speed, Low Temperature Hyperspectral Imager for High Enthalpy Ground Testing | Air Force Materiel Command | Total Small Business | |
| Reusable Illumination System | Air Force Materiel Command | Total Small Business | |
| Low - Cost Neuromorphic Edge Intelligence for Persistent Autonomous Change Detection and Machine Situational Memory | Air Force Materiel Command | Total Small Business | |
| Low-cost Mid-wave Infrared Focal-Plane Array (FPA) Fabrication through Direct-bond Interconnection | Office of Naval Research | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity