TGI_3819P12316A01_c5v3.pdf

FOUO

FOUO: Public availability to be determined under 5 USC 552

TASK GROUP INSTRUCTION

AIM REV 20.11.4.0 (OCTOBER 2020)

TGI COMPONENT NAME: TYPE: PHASE: REPEAT: CHANGE:

NO.: TK 9-40-0-F&9-40-1-W AY A 0 5

SHIP/HULL NO.: SHIP/HULL NAME: SYSTEM: PROJ/WO NO: CASREP CAT:

LCC-19 USS BLUE RIDGE 19P

CU PHASE TITLE:

F/O - CLEAN AND REPAIR DSTLT FUEL OR BLST 9-40-1-F AND CLEAN SW BLST 9-40-1-W

PREPARING ACTIVITY:

PREPARED BY: CODE PHONE DATE

YOUHEI ARAKAWA 231B 315-243-4496 21-DEC-2023

APPROVED BY: CODE PHONE DATE

RTOUTA TAKAGI 231B 315-243-4502 21-DEC-2023

CONCURRED BY: CODE PHONE DATE

CONCURRED BY: CODE PHONE DATE

CONCURRED BY: CODE PHONE DATE

CONCURRED BY: CODE PHONE DATE

REASON FOR WORK/NEED FOR CHANGE:

The location of work listed in paragraph 5.11.7 is incorrect.

CHANGE INSTRUCTIONS:

CH1: revise the title. (12/22/2023) CH2: revise the quantity of identification 1.3.8. (1/26/2024) CH3: remove JCN EM04-ZAD6. (11/5/2024) CH4: add tank number in paragraph 1.3.1. (3/3/2025) CH5: revise paragraph 5.11.7 to correct the location to 1.2.4 from 1.2.3 (7/18/2025)

SPECIAL REQUIREMENTS:

SURFMEPP

This work Affects a fire zone boundary. Fabrication and/or staging of a non-flammable closure is required.

CLEANLINESS FOR PIPING SYSTEM/EQUIPMENT LEVEL III

WORK CERTIFICATION SIGNATURES

COMPLETION OF WORK REVIEW: BADGE NO.: SHOP/CODE: PHONE: DATE:

ACCEPTANCE OF COMPLETED WORK

PHYSICAL INSPECTION PHYSICAL INSPECTION COMPLETED: BADGE NO.: SHOP/CODE: PHONE: DATE:

REQUIRED:☐YES ☒NO

RECORDS REVIEW: BADGE NO.: SHOP/CODE: PHONE: DATE:

TGI NO.: TK 9-40-0-F&9-40-1-W AY A 0

FOUO

SHIP: LCC-19 CHG/VER: 5/3

LIST OF EFFECTIVE PAGES

SHT NO. CHG NO. SHT NO. CHG NO. SHT NO. CHG NO. SHT NO. CHG NO. SHT NO. CHG NO.

1-7 Sketch (1-2)

J 1-2 Sketch (1)

M-1 Sketch (1-3)

1. SCOPE/PURPOSE

1.1 Title: Distillate Fuel or Ballast 9-40-0-F and Clean Salt Water Ballast 9-40-1-W; clean and repair

1.2 Location of Work:

1.2.1 Distillate Fuel or Ballast (9-40-0-F)

1.2.2 Clean Salt Water Ballast (9-40-1-W)

1.2.3 Air Conditioning Machinery Room No. One and Refrigeration Machinery Room (7-40-0-E)

1.2.4 CHT Tank No. One (8-48-0-W)

1.2.5 SD Storeroom (7-48-0-A)

1.2.6 Underwater Hull Weather, Frames between 43 and 45, Starboard

1.3 Identification:

1.3.1 Quantity (One EA), Distillate Fuel or Ballast

Tank No.: 9-40-0-F Capacity: 67,051 Gallons

1.3.2 Quantity (One EA), Clean Salt Water Ballast

Tank No.: 9-40-1-W Capacity: 27,158 Gallons

1.3.3 Quantity (2 EA), Manhole Cover Plate(s) for 9-40-0-F

Manhole No(s).: 7-45-1 Size: 15 Inches x 23 Inches Manhole No(s).: 7-47-2 Size: 15 Inches x 23 Inches Material: Steel

1.3.4 Quantity (2 EA), Manhole Cover Plate(s) for 9-40-1-W

Manhole No(s).: 7-40-1 Size: 15 Inches x 23 Inches Manhole No(s).: 7-47-1 Size: 15 Inches x 23 Inches Material: Steel

1.3.5 Quantity (2 EA), Bolting Ring for Manhole Cover Plate(s) for 9-40-0-F Manhole No(s).: 7-45-1 and 7-47-2 Material: Steel

FOUO

SHIP: LCC-19 CHG/VER: 5/3

1.3.6 Quantity (2 EA), Bolting Ring for Manhole Cover Plate(s) for 9-40-1-W Manhole No(s).: 7-40-1 and 7-47-1 Material: Steel

1.3.7 Quantity (7 EA), Bracket in 9-40-0-F

Remarks: See Sketch Enclosure-01 for location details.

1.3.8 Quantity (5 EA), Stud in 9-40-0-F

Remarks: See Sketch Enclosure-01 for location details.

1.3.9 Quantity (2 EA), Bracket in 9-40-1-W

Remarks: See Sketch Enclosure-02 for location details.

1.3.10 Quantity (One AY), Obsolete Piping including penetration Sleeve in 9-40-1-W Size: 1/2 Inch NPS Remarks: See Sketch Enclosure-02 for location details.

1.3.11 Quantity (One Lot), Web Frame 48 in 9-40-1-W, between Second Platform and Stringer S12 Base Material: OS, MIL-S-22698 GR A, 20.4 LBs Plate

1.3.12 Quantity (6 AY), Liner for Pipe Hanger Assembly of Heating Coil Piping located in 1.2.1 Size: 5 Inch IPS, 1/4 Inch THK Material: Synthetic Rubber Specification: MIL-PRF-6855, Class One, Grade 30 Remarks: See Sheet One (Zone 8-C) of 2.13, 2.14 and Sketch Enclosure-03 for detail

JCN: ES01-NPA3

1.3.13 Quantity (One EA), Cap for Drainage System Piping of Distillate Fuel or Ballast located in 1.2.3 Size: 1-1/2 Inch IPS Material: Bronze Specification: 803-1385711 Remarks: See Sheet One (Zone 5-B) of 2.15, Sheet One (Zone 8-C) of 2.16 and 2.17 for detail

Display of Local Label Plate: Sounding Tube 9-44-0-Q

JCN: ES01-NPA2

1.4 Security Classification: None. 1.5 Initial

Condition:

1.5.1 Potential Lead Hazard.

1.5.2 Dry Dock Work.

1.6 Contractor Work start date: 7/21/2026

1.7 Contractor Work completion date: 10/21/2027

2. REFERENCES:

REF.

NO.

DOCUMENT

/DRAWING

NUMBER

DOCUMENT/DRAWING TITLE REV CHG

NO.

COPY

REQ’D

(Y/N)

SOURCE

DOC

(Y/N)

PARA SEC PG CHP

1 NSI FY-25 NAVSEA Standard Items - ORG N 2 LI FY-25 Local Standard Items - ORG N

FOUO

SHIP: LCC-19 CHG/VER: 5/3

REF.

NO.

DOCUMENT

/DRAWING

NUMBER

DOCUMENT/DRAWING TITLE REV CHG

NO.

COPY

REQ’D

(Y/N)

SOURCE

DOC

(Y/N)

PARA SEC PG CHP

3 TM S9086-

CJ-STM-

010/CH-075

Fasteners 7 N

4 DWG 103-

2491032

2ND PLTF PLATING FR 8-52 G Y AL

L

5 DWG 114-

2491155

TRANSV BHD FR 40, Pump RM BHD and Trunk BHD FR 44-45

K Y AL

6 DWG 114-

2491161

DEEP TANK BHD FR 24, 48, 56, &

LONG BHD BEL 2ND PLATF FR

30-76

F Y AL

7 DWG 114-

2491156

AGC19 TRANSV BHD FR 52 & 64 G Y AL

8 DWG 102-

2491030

INNER BOTTOM PLTG FR8-1/2 -

51-1/2

G Y AL

9 DWG 101-

2491020

WEBS FR 42, 44, 46, 48 & 50 J Y AL

10 DWG 100-

2491003

SHELL PLTG & STGR FRAME 51

1/2 -102 1/4 CL TO 4 TH DECK

11 DWG 101-

2491011

CVK & SHELL LONG FR8-51-1/2 E Y AL

12 DWG 100-

2491001

Shell Plating & Stringer - Fr51-1/2 Ctr to 4th Dk

H Y AL

13 DWG 512-

2492465

HEATING COILS F.O., JP-5

TRANS & STRIPPING PIPING IN

INNER BOTTOM - FO JP-5 & CL

J Y AL

14 DWG 810-

4714432

STD Pipe Hangers Fabrication

DETS & INSTL

L N

15 DWG 508-

2492360

DRAINAGE SYS, ST & AE FWD FR

52 - ELEV & SECT

16 DWG 508-

2492359

DRAINAGE SYS. S.T. & A.E - FWD

FR 52 - PLAN

F Y AL

17 DWG 803-

1385711

VALVE, HOSE GLOBE, IN-LINE &

ANGLE 1-1/2 IN. - 250 PSI

N N

3. APPENDICES:

3.1. Appendix “J” TGI Job Summary Information Sheet

3.2. Appendix "M" TGI Material List

3.3. Appendix “D” Deficiency Form

4. GENERAL REQUIREMENTS:

4.1 Not Applicable.

5. PROCEDURE:

5.1 Accomplish the requirements of 099-902YO of 2.2 for each tank listed in 1.3.1 and 1.3.2.

5.1.1 Accomplish the requirements of 009-107 of 2.1.

5.1.1.2 Ensure General Cleaning must be Level III.

5.1.2 Accomplish installation of each manhole cover for each tank listed in 1.3.1 and 1.3.2 in accordance with Figure 075-4-1 of 2.3.

FOUO

SHIP: LCC-19 CHG/VER: 5/3

5.2 Repair each tank listed in 1.3.1, based on the CCIMS assessment report as designated by the SUPERVISOR, using 2.4 through 2.12 for guidance. See 5.11.4 through 5.11.6.

5.2.1 Vee-out and weld a total of one linear feet of each deteriorated and damaged weld. Each area of repair must include deck, bulkhead, shell plating, and overhead.

5.2.2 Chip and grind each surface flush in way of each repair.

5.2.3 Base metal weld buildup a total of 60 square inches of each plate defect in the tank.

5.2.3.1 For bidding purposes the base metal weld buildup must be one quarter inch thick.

5.2.3.2 Surface must be ground to sound metal prior to base metal weld buildup.

5.2.3.3 Fill each local pit and groove with weld material prior to application of each principal build up layer.

5.2.3.4 Grind each surface of completed base weld metal buildup smooth if greater than 1/8 inch above plate surface.

5.2.4 Remove existing, fabricate and install new a total of 10 square feet of deteriorated plate.

5.2.5 Remove existing, fabricate and install new a total of 4 linear feet of defective stiffener.

5.2.6 Accomplish the requirements of 009-12 of 2.1, including Table 2, Columns A, Lines One through 7.

5.2.6.1 Accomplish nondestructive testing in accordance with Line 11.

5.2.7 Accomplish the requirements of 009-25 of 2.1 for an air hose, water hose, or vacuum box test of each new insert weld seam. Allowable leakage: None.

5.3 Accomplish the requirements of 009-32 of 2.1 including Table 4, Line(s) 11, for tank side surface, and Table 3, Line(s) 12, for machinery space side surface of each cover plate listed in 1.3.3 and Table 4, Line(s) 17, for tank side surface, and Table 3, Line(s) 12, for machinery space side surface of each cover plate listed in 1.3.4

5.4 Accomplish the requirements of 009-32 of 2.1 for each bolting ring listed in 1.3.5 and 1.3.6.

5.5 Remove unused each existing bracket and stud listed in 1.3.7 through 1.3.9, using 2.6 and 2.9 through 2.11 for guidance.

5.6 Remove unused each existing obsolete piping listed in 1.3.10, using 2.9 for guidance.

5.7 Accomplish build up weld of remaining hole on each web frame listed in 1.3.11 where removal of each obsolete piping listed in 1.3.10, using 2.9 for guidance.

5.7.1 Accomplish the requirements of 009-12 of 2.1, including Table 2, Column(s) A, Lines One through 7.

5.7.2 Accomplish the requirements of 009-25 of 2.1 for a local air hose test of each new weld of the web frame.

Allowable leakage: None.

5.8 Install each new pipe hanger liner listed in 1.3.12 to pipe hanger assembly of heating coil piping, using 2.13, 2.14 and Enclosure-03 for guidance.

5.9 Install each new cap for drainage system piping of distillate fuel or ballast tank listed in 1.3.13, using 2.15 through 2.17 for guidance.

5.10 Accomplish the requirements of 009-32 of 2.1 for each new and disturbed surface.

FOUO

SHIP: LCC-19 CHG/VER: 5/3

5.11 Notes:

5.11.1 Planner: Code 231B Y. Arakawa, 243-4496

Planner: Code 234 R. Saeki, 243-1109 Engineer: Code 250 M. Kunugi, 243-7885

5.11.2 Work Integration Manager (WIM): Code 333 T. Yaginuma, 080-5419-0598

5.11.3 This TGI meets the intent of DDG CSWT File Nos. 123-133 and 123-142.

5.11.4 CCIMS assessment of each tank listed in 1.3.1 will be accomplished by SRF-JRMC (TGI No.

3819P12316I01), and the Project team will provide the assessment report with engineering evaluation under DL process for front loading structure repair.

5.11.5 Removal and installation of interferences, and gas free operation, preservation of boundary spaces relating to front loading structure repair are not included in this TGI. They will be covered by a DL in the future based on Contractor submitted condition report.

5.11.6 Materials for structure members relating to front loading repair will be provided in the future as a DL based on Contractor submitted condition report.

5.11.7 Opening, initial cleaning, and closing of each space listed in 1.2.4 will be covered by TGI No.

3819P12355A01 (KTR TGI).

5.11.8 JCNs ES01-NPA2, ES01-NPA3, and ES01-NPA8 are in response to Condition Report No. NNR17001-8-02 from Sumitomo Heavy Industries, Ltd. Dated 17 AUG 2021.

5.11.9 JCNs ES01-NPAH and ES01-NPAJ are in response to Condition Report No. NNR17001-8-08 from Sumitomo Heavy Industries, Ltd. Dated 24 DEC 2021.

5.11.10 Work per this instruction involves cutting an access (or removal of a door) through a fire zone bulkhead, through the hull of the ship above the turn of the bilge, through ventilation components (ducting, plenums, etc.), or through any air-tight, fume-tight or watertight bulkheads normally used to control air flow in the event of a shipboard fire. A nonflammable closure is required in accordance with COMNAVSEASYSCOM MSG R 261400Z JUL 12. The closure, if not continuously in use, shall be staged near the access, readily visible and accessible, so that any emergency responder can install the closure to affect proper air flow onboard the ship.

5.11.11 JCNs ER02-ZA01, ER01-ZAN2, EM04-ZAB6, ES01-NPAH, ES01-NPA8, ES01-NPAJ, ES01-NPA2, ES01- NPA3 are related to this TGI.

5.12 Government Furnished Material (GFM):

5.12.1 SRF-JRMC will provide GFM listed in Appendix “M”.

5.13 SRF-JRMC will provide the following service work: (TGI No. 3819P12316S02)

5.13.1 [C740] Crane and crane rigging service.

5.13.2 [X99E] Utility service, electrical.

5.13.3 [X99M] Utility service, including low pressure air supply, water supply, and steam supply.

5.13.4 [C106.1] Safety inspection for SRF-JRMC employees.

5.13.5 [C106.2] Gas free inspection for SRF-JRMC employees.

FOUO

SHIP: LCC-19 CHG/VER: 5/3

5.13.6 [C133] QA inspection for (G) symbol(s).

5.13.7 [C135] QA inspection for (G) symbol(s).

5.13.8 [C250] Technical support.

FOUO

J-1

SHIP: LCC-19 CHG/VER: 5/3

APPENDIX "J"

TGI JOB SUMMARY INFORMATION SHEET

SYSTEM: PLANT NO.: COMPONENT NAME: TYPE: PHASE: REPEAT: CU PH

VERSION:

CASREP

CAT:

TK 9-40-0-F&9-40-1-W AY A 0 3

CU PHASE TITLE:

F/O - CLEAN AND REPAIR DSTLT FUEL OR BLST 9-40-1-F AND CLEAN SW BLST 9-40-1-W

PRIMARY COMPONENT:

COMPONENT UNIT LIST (FOR ASSEMBLIES):

FO/BLST 9-40-0-F TK BLST 9-40-1-W TK BLST 7-40-0-E PP MANHOLE 7-47-1 HA

MANHOLE 7-47-2 HA MANHOLE 7-40-1 HA MANHOLE 7-45-1 HA

ATTACHMENT LIST:

1. ENCLOSURE-01 (3819P12316A01-Sketch-01.pdf) saved on 21-DEC-2023 0000.

2. ENCLOSURE-02 (3819P12316A01-Sketch-02.pdf) saved on 21-DEC-2023 0000.

3. ENCLOSURE-03 (3819P12316A01-Sketch-03.pdf) saved on 21-DEC-2023 0000.

ZONE MANAGER: ZONE: COMPARTMENT: LEVEL: FRAME: SIDE:

TAKAHASHI ,YASUHIKO

JO: KO: TOTAL MAN HRS: TOTAL MAT’L COST TOTAL DURATION: PLANNING ACCEPTANCE:

3819P12316 A01 1773 $135.00 1

CU PHASE DESCRIPTION:

The purpose of this TGI is to clean and repair distillate fuel or ballast 9-40-0-F and clean salt water ballast 9-40-1- W

Location of Work:

Distillate Fuel or Ballast (9-40-0-F) Clean Salt Water Ballast (9-40-1-W) Air Conditioning Machinery Room No. One and Refrigeration Machinery Room (7-40-0-E) CHT Tank No. One (8-48-0-W) SD Storeroom (7-48-0-A) Underwater Hull Weather, Frames between 43 and 45, Starboard

TASK NAME

SHOP TSD/WC TS CREW# MHRS

HIGH RAD

HOURS

RC

GRID#

5.1 LBR 576HRs 22 KE PC 1 576 0

5.2 SFTR 480HRs, WELD 270HRs, CARP 16HRs, PNTR 8HRs, QA 2HRs

22 KE PC 1 776 0

5.3 PNTR 22HRs, QA 10HRs 22 KE PC 1 32 0

5.4 PNTR 22HRs, QA 10HRs 22 KE PC 1 32 0

5.5 SFTR 32HRs, WELD 16HRs, RGRS 64HRs 22 KE PC 1 112 0

5.6 PFTR 24HRs, WELD 16HRs, PNTR 8HRs, RGRS 32HRs 22 KE PC 1 80 0

5.7 WELD 30HRs, PNTR 8HRs, QA 2HRs 22 KE PC 1 40 0

5.8 PFTR 24 HRs, RGRS 32 HRs 22 KE PC 1 56 0

5.9 PFTR 12 HRs 22 KE PC 1 12 0

5.10 PNTR 46HRs, QA 10HRs 22 KE PC 1 56 0

FOUO

J-2

SHIP: LCC-19 CHG/VER: 5/3

TASK NAME

SHOP TSD/WC TS CREW# MHRS

HIGH RAD

HOURS

RC

GRID#

Dewatering and Cleaning Work CFM: $8,550 marine chemist, gaskets, fasteners, tank watch cost, and MISC.

22 MQ CS 0 0 0

Structural Work CFM: $21,900 for all paints, thinner, grit including waste disposal cost, fire watch and tank watch cost, MT inspection cost, lead sampling/analysis cost, air compressor rental cost and fuel oil cost for air hose test, and MISC such as electrode, gases, temporary closure and covering material, and other consumable.

22 MQ CS 0 0 0

CFM: $ 786 for piping work, tank watch cost, hanger liner material cost and MISC.

22 MQ CS 0 0 0

Process Funding Document 10 CT OM 1 1 0

Version-01: revise title. C231B R. Takagi 12/22/2023 -/-/N V-01 0 0 0

Version-02: revise title and description. C231B R. Takagi 12/22/2023 -/-/N

V-02 0 0 0

Version-03: remove JCN EM04-ZAD6. C231B R. Takagi 11/5/2024 Y/Y/N

V-03 0 0 0

FOUO

M-1

SHIP: LCC-19 CHG/VER: 5/3

APPENDIX “M”

TGI MATERIAL LIST

SYSTEM: PLANT NO.: COMPONENT NAME: TYPE: PHASE: REPEAT: CU PH

VERSION:

CASREP

CAT:

TK 9-40-0-F&9-40-1-W AY A 0 3

CU PHASE TITLE:

F/O - CLEAN AND REPAIR DSTLT FUEL OR BLST 9-40-1-F AND CLEAN SW BLST 9-40-1-W

MATERIAL REFERENCES

REF

NO.

DOCUMENT/DRAWING

NUMBER

DOCUMENT/DRAWING TITLE REV

JOB ORDER: KEY OP:

3819P12316 A01

MATERIAL LIST

ITEM

NO.

PC

NO.

REF

NO.

M

C DESCRIPTION

STOCK

NUMBER

GENERIC

MATL

TYPE LVL QA

HAZ

MAT

DOC

NO.

QTY

REQD/

UNIT

QTY

USED/

UNIT

401 M CAP, BRONZE, ASTM B61, USE

FOR VALVE HOSE GLOBE IN-

LINE & ANGLE, 1-1/2 IN,

250PSI,

NAVAL SHIP SYSTEMS

COMMAND DWG# 803-

1385711G, ORDERED FOR KTR

ORIG: C234 R.SAEKI 243-1109

9B 4730 LL9001632 NA 4 N 40047412 1/EA

NOTES:

FOUO: Public availability to be determined under 5 USC 552 SHEET_____OF_____

☐ NUCLEAR APPENDIX "D"

DEFICIENCY FORM

☐ NON-NUCLEAR

1. SHIP/HULL NO.: 2a. DL or DR No.

(Circle One)

2b. REVISION: 3a. COMPONENT NAME: 3b. TYPE: 3c. PHASE: 3d. REPEAT:

LCC-19 TK 9-40-0-F&9-40-1-W AY A 0

4a. ICN: 4b. KEY OP: 5. LOC SPACE/LVL: FRAME: P/S/C: 6. CAUSED BY:

3819P12316 A01

7. DESCRIPTION:

8. ORIGINATOR: NAME: BADGE: SHOP/CODE: DATE: PHONE NO.:

9. CORRECTIVE ACTION:

10. EVALUATOR: NAME: BADGE: SHOP/CODE: DATE: PHONE NO.:

FOR NON-NUCLEAR USE ONLY

11. RFD/RFW REQ’D ☐ LAR REQ'D ☐

ILS MOD REQ’D ☐

SRD/PLAN REV REQ'D ☐

DWG NO.: _____________________ S/A NO.: ___________________

12. ISOLATION SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.:

SATISFACTORY:

13. SUBSAFE OQE RECORD? SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

YES ☐ NO ☐

14. CORRECTIVE ACTION SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

COMPLETE:

15. INSPECTION REQ’D? INSPECTION COMPLETE/SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

_________:YES ☐ NO ☐

16. RECORDS REVIEW SIGN: BADGE: SHOP/CODE: DATE: PHONE NO.

COMPLETE (DR ONLY)

DL’s ISSUED

(DR ONLY)

FOUO: Public availability to be determined under 5 USC 552 SHEET_____OF_____

☐ NUCLEAR Deficiency Form Continuation Sheet ☐ NON-NUCLEAR

1. SHIP/HULL NO.: 2a. DL or DR No.

(Circle One) 2b. REVISION: 3a. COMPONENT NAME: 3b. TYPE: 3c. PHASE: 3d. REPEAT:

LCC-19 TK 9-40-0-F&9-40-1-W AY A 0

SKETCH

3819P12316A01 ENCLOSURE-01 Sheet 1 of 3

Youhei.Arakawa.ja Text Box Location Detail of obsolete bracket and stud in 9-40-0-F

Youhei.Arakawa.ja_1 Line

Youhei.Arakawa.ja_2 Line

Youhei.Arakawa.ja_3 Text Box Section 3-A

Youhei.Arakawa.ja_4 Line

Youhei.Arakawa.ja_5 Line

Youhei.Arakawa.ja_6 Text Box Elecation 3-B

Youhei.Arakawa.ja_7 Text Box Plan 1-B Inner Bottom (Far Side) 9-40-0-F

Youhei.Arakawa.ja_8 Line

Youhei.Arakawa.ja_9 Rectangle

Youhei.Arakawa.ja_10 Text Box Plan 1-A Inner Bottom 9-40-0-F

Youhei.Arakawa.ja_11 Line

Youhei.Arakawa.ja_12 Line

Youhei.Arakawa.ja_13 Line

Youhei.Arakawa.ja_14 Line

Youhei.Arakawa.ja_15 Line

Youhei.Arakawa.ja_16 Text Box Section 2-A

Youhei.Arakawa.ja_17 Rectangle

Youhei.Arakawa.ja_18 Rectangle

Youhei.Arakawa.ja_19 Rectangle

Youhei.Arakawa.ja_20 Rectangle

Youhei.Arakawa.ja_21 Rectangle

Youhei.Arakawa.ja_22 Rectangle

Youhei.Arakawa.ja_23 Text Box Fuel/Ballast Tank (9-40-0-F)

Youhei.Arakawa.ja_24 Callout Fuel/Ballast Tank (9-40-0-F)

Youhei.Arakawa.ja_25

Section 2-B

3819P12316A01 ENCLOSURE-01 Sheet 2 of 3

Youhei.Arakawa.ja_26

Section 2-A

OT TRANSV BHD FR 48

LKG AFT

Youhei.Arakawa.ja_27 Line

Youhei.Arakawa.ja_28 Text Box Section 2-B

OT TRANSV BHD FR 48

LKG AFT

Youhei.Arakawa.ja_29 Line

3819P12316A01 ENCLOSURE-01 Sheet 3 of 3

Youhei.Arakawa.ja_30

Section 3-A Center Vertical Keel LKG Port

Youhei.Arakawa.ja_31 Line

Youhei.Arakawa.ja_32 Text Box Elevation 3-B OT Frame 48 LKG Aft

Youhei.Arakawa.ja_33

3819P12316A01 ENCLOSURE-02 Sheet 1 of 2

Youhei.Arakawa.ja_34

Location Detail of obsolete bracket and piping sleeve in 9-40-1-W

Youhei.Arakawa.ja_35 Text Box Obsolete Bracket See Section 2-B

Youhei.Arakawa.ja_36 Line

Youhei.Arakawa.ja_37 Line

Youhei.Arakawa.ja_38 Line

Youhei.Arakawa.ja_39 Line

Youhei.Arakawa.ja_40 Text Box Obsolete Piping See Section 2-A

Youhei.Arakawa.ja_41 Line

Youhei.Arakawa.ja_42 Line

Youhei.Arakawa.ja_43 Text Box Obsolete Bracket on Stringer S8 at FR 52 See Detail 1-A

Youhei.Arakawa.ja_44 Text Box Detail 1-A Stringer 8(S)

LKG INBD

Youhei.Arakawa.ja_45 Line

Youhei.Arakawa.ja_46 Rectangle

Youhei.Arakawa.ja_47 Text Box Plan View 2nd PLTF

Youhei.Arakawa.ja_48

3819P12316A01 ENCLOSURE-02 Sheet 2 of 2

Youhei.Arakawa.ja_49

Section 2-B

WEB FR 44

LKG FWD

Youhei.Arakawa.ja_50 Line

Youhei.Arakawa.ja_51 Text Box Section 2-A

WEB FR 48

LKG AFT

Youhei.Arakawa.ja_52

ENCLOSURE-013819P12316A01 Sheet 1 of 1

Heating Coil Piping

Youhei.Arakawa.ja_53

ENCLOSURE-03