N6134018R0056_APPENDIX_B-1_(L)_TSC_TTE_GREAT_LAKES_DRAFT.pdf

SURFACE COMS ADDENDUM A N61340-18-R-0056

PWS # 66410-A-0448 15 April 2018

APPENDIX B-1

TRAINING SUPPORT CENTER (TSC) TECHNICAL TRAINING EQUIPMENT (TTE)

GREAT LAKES, IL

1.0 INFORMATION. This Appendix augments Surface COMS PWS Addendum A and the Surface

(Surface COMS TTE) Supplemental Addendum AB, with specific site information requirements related to Training Support Center Great Lakes, IL. Table 1 provides a visual overview of the document structure developed for the Surface COMS PWS from the bottom up perspective.

TABLE 1

2.0 SITE OPERATONS AND MATERIAL SUPPORT PACKAGE (MSP) INFORMATION.

This appendix provides the general description and requirements for the TTE located at the Training

Support Center Great Lakes, IL. The attachments below provide the maintenance requirements, description, location and normal operating hours for the specific TTE. The normal operating hours are found in paragraph 3.0 of the attachments along with the Scheduling Requirements (if any) and Task

Number. Some attachments may also provide a list of one (1) or more of the following: Equipment and

Parts, and Preventive Maintenance System (PMS) requirements.

The following are the attachments to this appendix:

Attachment Title

(1) Diesel Division Maintenance and Cargo /Weapons Elevator

Maintenance

(2) Hull Technician Maintenance

(3) Machinery Repairman (MR) Maintenance

(4) Steam Division Maintenance/Repair

(5) Mechanical, Electrical/ Calibration

(6) Electronic Technician (ET) /Interior Communications (IC)/Firecontrolman

(FC) “A” School Maintenance

(7) Gunner’s Mate (GM) “A” School Maintenance

(8) Interior Communications (IC) “C” School

(9) Professional Mariners (BM/QM/OS “A”) Equipment Maintenance Maintenance

(10) Module 9C Equipment Maintenance

(11) 2M Support of COMS Equipment

(12) Apprentice Technical Training (ATT) Maintenance

(13) Gas Turbine Propulsion Plant Maintenance

(14) Electrician’s Mate (EM) “C” School Maintenance

(15) 3M Systems Coordinator

(16) Cold Iron

(17) GL-47 Gas Turbine Propulsion Plant Maintenance

ADDENDUM A

Surface COMS

PWS 66410-A-0448

SUPPLEMENTAL ADDENDUM AB

Surface COMS TTE

Training Support Center TTE Great Lakes, IL

TRAINING SUPPORT CENTER (TSC) TECHNICAL TRAINING EQUIPMENT (TTE)

GREAT LAKES, IL

2.1 MATERIAL SUPPORT PACKAGE (MSP). No MSP will be provided at this time.

2.2 GOVERNMENT FURNISHED PROPERTY (GFP). Refer to PWS Addendum A (Para

5.6.2).

2.3 GOVERNMENT FURNISHED FACILITIES (GFF). The Government will provide Furnished

Facilities (GFF) consisting of an office, maintenance and storage space. The Government will place GFF in the custody of the Contractor for the term of the contract. Work area (square footage) values are approximated. Included in this attachment are floor plans for each division/functional area.

SWOSU SYSTEMS SCHOOLS DEPARTMENT

Bldg./Room Bldg./Purpose Floor Level Work Area (Sq. Ft.)

238/125 Diesel Division Maintenance Office 1 650 sf

238/124A Diesel Gauge Calibration (office) 1 105 sf

215/166 Cargo/Weapons Elevator Maintenance 1 11,500 sf

520/146A/146B Hull Technician Equip. Maintenance 1 2316 sf

520/135 Carpenter Shop 1 Shared Space

523/116 Machinery Repairman Equip. Maintenance 1 Shared Space

236/153 Mechanical/ Electrical Calibration 1 950 sf

236/154 2M Support of COMS Equipment 1 1160 sf

6224/128 Gas Turbine Propulsion Plant (Bldg. 6224) 1 682 sf

322/E308 Electrician’s Mate “C”/MODULE 9C/ IC

“C” School

1 285 sf

CSCSU SCHOOLS DEPARTMENT

621/304 Electronic Technician (ET)/Interior Comm.

(IC)/ Fire Controlman (FC) “A

1 533 sf

616 Storage 1 304 sf

616 Apprentice Technical Training (ATT) 1 570 sf

SUPPORT DEPARTMENT

238/129 Command 3-M Systems Coordination 1 70sf

OTHER

238/154 Site Managers Office 1 609sf

2.4 GOVERNMENT FURNISHED SOFTWARE. The following Government Furnished Software is provided: Measure Interactive Query (MIQ), General Distribution APL CD-ROM (GDAPL), Federal

Logistics Data (FEDLOG), Test Measurement Diagnostic Equipment Index (TMDE), Naval Ships

Technical Manual (NSTM), Module Test/Repair Operation, Ship’s 3M Reference Information, Calibration Requirements List for Installed Instrumentation Surface Ships (SISCAL), DDG-51 Class

IETM, Metrology Products (METPRO), and MEASURE Web

ATTACHMENT (1)

DIESEL DIVISION MAINTENANCE AND CARGO/ WEAPONS ELEVATOR MAINTENANCE

1.0 DESCRIPTION. Consists of Diesel Division Maintenance and Cargo/Weapons Elevator

Maintenance

2.0 LOCATION.

BUILDING DESCRIPTION

238 Diesel Division Maintenance

329 Diesel Division Maintenance

215 Cargo/Weapons Elevator Maintenance

3.0 NORMAL OPERATING HOURS AND TASK NUMBER.

NORMAL TRAINING HOURS & TASK NUMBER

TITLE: Diesel Division Maintenance and Cargo

/Weapons Elevator Maintenance

SERIAL #: NONE

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

Diesel Division TTE ALCO Electro Motor Division is used for 5 hours/day for 7 (3 wk. class)/ year

51A 5.0 0700 1200 N/A N/A N/A N/A

51B 9.0 0700 1600 N/A N/A N/A N/A

51C 1.0 0700 0800 N/A N/A N/A N/A

Diesel Division TTE Fairbanks Eng. / Colt Peilstick used for 5 hours /day for 7 (3 wk. class) / year

51D 5.0 0700 1200 N/A N/A N/A N/A

51E 9.0 0700 1600 N/A N/A N/A N/A

51F 1.0 0700 0800 N/A N/A N/A N/A

Diesel Division TTE LSD 41 PC is used for 5 hours /day for 7 (3 wk. class) / year

51G 5.0 0700 1200 N/A N/A N/A N/A

51H 9.0 0700 1600 N/A N/A N/A N/A

51I 1.0 0700 0800 N/A N/A N/A N/A

Diesel Division TTE Generic Equipment is used for 4 hours /day for 7 (3 wk. class) / year

51P 4.0 0700 1100 N/A N/A N/A N/A

51Q 8.0 0700 1500 N/A N/A N/A N/A

51R 0.0 - - N/A N/A N/A N/A

Diesel Division TTE Det. Diesel Eng. Lab is used for 8 hours /day for 7 (3 wk. class) / year

51S 8.0 0700 1500 N/A N/A N/A N/A

51T 12.0 0700 1900 N/A N/A N/A N/A

51U 4.0 0700 1100 N/A N/A N/A N/A

Cargo Weapons Elevator TTE is used for 8 hours/week for 20-30 weeks / year

52A 8.0 0700 1500 N/A N/A N/A N/A

52B 12.0 0700 1900 N/A N/A N/A N/A

52C 4.0 0700 1100 N/A N/A N/A N/A

NOTE: Operational Hours per Day (OHPD)

4.0 MAINTENANCE REQUIRMENTS.

4.1 SELDOM USED OR STORED EQUIPMENT.

4.2 DIESEL MAINTENANCE. Preventive and corrective maintenance will be performed on the following equipment for the remainder of the contract:

EQUIPMENT/PARTS SERIAL NUMBER LOCATION QTY

DeLaval Fuel Oil Purifier 3512587 238/High-Bay 1 Each

4.3 DIESEL MAINTENANCE. Only On Call Corrective Maintenance will be performed on the following equipment for the remainder of the contract:

EQUIPMENT/PARTS SERIAL NUMBER LOCATION QTY

Sound Powered Phone

Headsets N/A 329/114 4

5.0 MAJOR HARDWARE LIST. Preventive and corrective maintenance will be performed on the following equipment for the remainder of contract:

5.1 DIESEL DIVISION MAINTENANCE, BLDG 238.

EQUIPMENT/PARTS SERIAL NUMBER LOCATION QUANTITY

Valves and Valve Operator

(All are on operating blocks) N/A Room 122 &

#1 Detroit/GM 6-71 0580A008405 Room 122 1

#2 Detroit/GM 6-71 6FA2480 Room 122 1

Christie Electric Corp Power Unit N/A Room 122 1

Ingersoll-Rand 15T4 MPAC#1 717004/5523 Room 124 1

Ingersoll-Rand 15T4 MPAC#2 717004/5524 Room 124 1

ALCO 251c, 16 Cylinder Diesel Engine 003628 Diesel Eng

Lab

ALCO Low Air Compressor – Gardner-

Denver

717029 Diesel Eng

Lab

Fuel Oil Transfer Heater 78891019-02-2 Room 124 1

Fairbanks 38D-1/8 Engine Simulator 38D88012DGN Room 124 1

Semler Industries Fuel Oil Service Pump 1420426 Room 124 1

Actuator Tester 0000000000 Room 123 1

5.2 DIESEL SCHOOL EQUIPMENT, BLDG 329. The following equipment will be used 2-3 times each week for 8 hours per day.

Valves and Valve Operator N/A Room

114A/114B

Rigid Hull Inflatable (Boat RHIB 1) 24RB881 Room 119 1

Volvo Penta Outdrive 3102S130S Room 119 1

Volvo Penta Diesel Engine 0000868936 Room 119 1

Fire Pump (Carver) 250 psi. 121845 Room 114A 1

Sea Water Cooling System N/A Room 119 1

Heat Exchanger N/A Room 119 1

Electric Fan N/A Room 119 1

Expansion Tank N/A Room 119 1

The following equipment will be used every other day for 1 hour per day to equal 120 times per year.

Spirax 25P Steam Pressure Reducing Valves N/A Room 119B 2

Valves and Valve Operator N/A Room 119B 36

Relief Valves N/A Room 119B 2

Y Strainers N/A Room 119B 3

Orifices N/A Room 119B 3

Check Valves N/A Room 119B 2

Aero Water Heater N/A Room 119B 1

5.3 CARGO/WEAPONS ELEVATOR SCHOOL MAINTENANCE , BLDG 215.

Full Scale Elevator Trainer (FSET) N/A Room 170

Compressor, Low Press, Air 786093 Compressor Room

Direct Status Logic Controller 6263901010379 Electrical Room

Direct Status Logic Horizontal 68899ED378A Electrical Room

Magnetic Relay Controller 006 Electrical Room

Electromagnetic Controller 007 Electrical Room

Vertical ¼ Scale FSET- lec QSVET-1 Electrical Room

Coupling Shifter Mechanism 62639 Room 170 1

Portable HPU Trainer F184 Compressor Room

Vertical Sliding Door Trainer 84097-08-001 Mech Classroom

Horizontal Rolling Door Trainer 8497-8-001 Mech Classroom

Valves and Valve Operator N/A High Bay 100

Denison Variable Displacement Piston N/A Mech Classroom

Hatch Trainer 84097-6-001 Mech Classroom

Emergency Power Unit E1-15 Compressor Room

Filter Buggy 12AC Compressor Room

Vertical ¼ Scale FSET-Mech 46503-1 Mech Classroom

Vertical ¼ Scale FSET-Mech 51203-1 Mech Classroom

Eyewash Station N/A Room 170 6

Sound Powered Phone System N/A Room 170 1

Compressor, High Pressure Air 0017634 Compressor Room

Unidynamics Port. Card Tester 9510A3SY13 Mech Classroom

Filter Buggy 12ZE Compressor Room

Drill Press 5072KC04386 Compressor Room

Standard Electronic Module Trainer 62639010379 Portable between

153/150

Cargo Elevator Hydraulic Trainer 85120001-001 Mech Classroom

5.4 DIESEL SCHOOL/ CARGO ELEVATOR EQUIPMENT IN LAY-UP MAINTENANCE

STATUS. None

6.0 SPECIAL REQUIRMENTS. None

7.0 LINES OF DEMARCATION. The contractor shall provide support to all fluid systems in direct support of the equipment identified in Appendix B-1, Attachment 1, (i.e., Fuel oil, cooling water, and pneumatic) which includes, but is not limited to tanks, pumps, valves and piping that lie within the diesel lab hi-bay area.

Steam Station includes maintenance on the following:

a. Steam support begins at the Steam root valve in Room 114A (main engine room) and ends up to and including the Valve CNDS-V47 Room 119B and the Condensate Valve DRN-V64 in Room 114A.

b. Potable cold water support begins at the cold water inlet CW-V55 to Aerco water heater up to and including the Dishwater Hot water valves HW-V-57B and HW-V57C in Room 119B.

Fire Main Maintenance begins at the Fire Main Water Pump and ends at the Fire main Cooling Water

Tank.

ATTACHMENT (2)

HULL TECHNICIAN (HT) MAINTENANCE

1.0 DESCRIPTION. Consists of Hull Technician School and Non-Destructive Testing (NDT) preventative and corrective maintenance

Building 520 – Hull Technician Maintenance

Building 520 – Non-Destructive Testing (NDT)

3.0 NORMAL OPERATING HOURS.

TITLE: Hull Technician (HT) Maintenance SERIAL #: None

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

54A 9.0 0700 1600 N/A N/A N/A N/A

54B 13.0 0700 2000 N/A N/A N/A N/A

54C 5.0 0700 1200 N/A N/A N/A N/A

Hull Technician TTE is used for 9 hours /day for 48-50 weeks / year

4.0 SELDOM USED OR STORED EQUIPMENT. NONE

5.0 PROJECT LIST.

5.1 HULL TECHNICIAN MAINTENANCE.

LAB SIZE NOMENCLATURE PROJECT

Projected Daily

Qty of Use

MIN/O

N

HAND

GAS 1” x 6” Schedule 40 Brass Pipe (1” Dia.) Pressure Vessel 25 150

GAS 1” x 6” Schedule 40 Carbon Steel Pipe.

NOT Threaded

Pressure Vessel 25 150

GAS 1” x 6” Scheduled 40 Carbon Steel Pipe.

Threaded on one end only

Pressure Vessel 25 150

GAS 2” x 10” Schedule 40 CUNI Pipe (2” Dia.) Pipe to Coupling 25 150

GAS 1/8” x 41” x

4”

5lb. Carbon Steel Plate. Base Plate

(Cladding)

50 150

GAS 1/8” x 2” x

2”

5lb. Carbon Steel Plate. Base Plate for clips 50 150

GAS 1/8” x 2” x

2”

Brass Plate. Clips 100 150

ARC 2” Schedule 160 Steel Pipe Crank shaft 25 150

ARC ¼” x 3” x 6” 10lb. Carbon Steel Plate. T-Joint 25 150

ARC ¼” x 1 ½” x 10lb. Carbon Steel Plate. T-Joint 75 150

6”

ARC ¼” x 4” x 6” 10lb. Carbon Steel Plate or Strips. Flat Plate

(Cladding)

25 150

PIPE 3/8” x 5” x

5”

15lb. Carbon Steel Plate. 1”, 4 Bolt Flange 25 150

6.0 EQUIPMENT AND PARTS LIST.

6.1 HULL TECHNICIAN (HT) MAINTENANCE.

Preventive and corrective maintenance will be performed on the following equipment:

EQUIPMENT LOCATION SERIAL QTY

ROD Oven Room 140 N/A 6

Miller Shopmaster 300 Room 140 LC095444 1

Miller Shopmaster 300 Room 140 LC021532 1

Miller Shopmaster 300 Room 140 LC021534 1

Miller Shopmaster 300 Room 140 LC156563 1

Miller Shopmaster 300 Room 140 LC156587 1

6.1 HULL TECHNICIAN MAINTENANCE (Con’t)

Miller Shopmaster 300 Room 140 LC156589 1

Miller Shopmaster 300 Room 140 LC156590 1

Miller Shopmaster 300 Room 140 LC156591 1

Miller Shopmaster 300 Room 140 LC095445 1

Miller Shopmaster 300 Room 140 LC095456 1

Miller Shopmaster 300 Room 140 LC095470 1

Miller Shopmaster 300 Room 140 LC095493 1

Miller Shopmaster 300 Room 140 LC095494 1

Miller Shopmaster 300 Room 140 LC095495 1

Miller Shopmaster 300 Room 140 LC095497 1

Miller Shopmaster 300 Room 140 LC095451 1

Syncrowave 250DX/350LX Room 140 ME380437L 1

Miller Shopmaster 300 Room 140 KE565648 1

Miller Shopmaster 300 Room 140 KE565620 1

Miller Shopmaster 300 Room 140 KE565646 1

Miller Shopmaster 300 Room 140 KE565616 1

Miller Shopmaster 300 Room 140 KD525970 1

Miller Shopmaster 300 Room 140 KE565625 1

Miller Shopmaster 300 Room 140 KE565641 1

Miller Shopmaster 300 Room 140 K3565617 1

Miller Shopmaster 300 Room 140 KE565640 1

Miller Shopmaster 300 Room 140 KE565622 1

Miller Shopmaster 300 Room 140 KE565636 1

Miller Shopmaster 300 Room 140 KE565638 1

Miller Shopmaster 300 Room 140 KD525969 1

Miller Shopmaster 300 Room 140 KE565615 1

Miller Shopmaster 300 Room 140 KE565643 1

Miller Shopmaster 300 Room 140 KD508927 1

Syncrowave 250DX/350LX Room 140 MA350045L 1

Miller Shopmaster 300 Room 140 LC257669 1

Miller Shopmaster 300 Room 140 LC156592 1

Miller Shopmaster 300 Room 140 LC156593 1

Miller Shopmaster 300 Room 140 KE565623 1

Miller Shopmaster 300 Room 140 LC238405 1

Miller Shopmaster 300 Room 140 KE565621 1

Miller Shopmaster 300 Room 140 LC257671 1

Miller Shopmaster 300 Room 140 LC257674 1

Miller Shopmaster 300 Room 140 LC293965 1

Miller Shopmaster 300 Room 140 LC293966 1

Miller Shopmaster 300 Room 140 LC294017 1

Miller Shopmaster 300 Room 140 LA268716 1

Miller Shopmaster 300 Room 140 LA274216 1

Miller Shopmaster 300 Room 140 KE565618 1

Miller Shopmaster 300 Room 140 LA249741 1

Miller Shopmaster 300 Room 140 LA098092 1

Miller Shopmaster 300 Room 140 LA268712 1

Miller Shopmaster 300 Room 140 LA268713 1

6.1 HULL TECHNICIAN MAINTENANCE (Con’t)

Miller Shopmaster 300 Room 140 LA243680 1

Miller Shopmaster 300 Room 140 LA243682 1

Miller Shopmaster 300 Room 140 LA243683 1

Miller Shopmaster 300 Room 140 KE565644 1

Miller Shopmaster 300 Room 140 KE565619 1

Miller Shopmaster 300 Room 140 KE565634 1

Miller Shopmaster 300 Room 140 KE565647 1

Miller Shopmaster 300 Room 140 KD511403 1

Miller Shopmaster 300 Room 140 KE565628 1

Miller XMT 304 Room 140 LC591900 1

Miller XMT 304 Room 140 LC591902 1

Miller XMT 304 Room 140 LC591908 1

Miller XMT 304 Room 140 LC591954 1

Miller XMT 304 Room 140 LC591903 1

Miller XMT 304 Room 140 LC591901 1

Miller XMT 304 Room 140 LC591898 1

Miller XMT 304 Room 140 LC591905 1

Miller XMT 304 Room 140 LC591907 1

Miller XMT 304 Room 140 LC591951 1

Miller XMT 304 Room 140 LC591958 1

Miller XMT 304 Room 140 LC591952 1

6.2 GOVERNMENT FURNISHED EQUIPMENT (GFE)

Preventive and corrective maintenance will be performed on the following equipment:

EQUIPMENT MANUFACTURER LOCATION SERIAL QTY

Portable Welder Miller Bobcat 225G Room 146B KD399114 1

Lathe Lodge and Shipley Room 146B 41964 1

Lathe Monarch Room 146B 38327 1

Lathe Clausing Room 146B 301864 1

Turret Lathe Warner & Swasey Room 146B 590102 W+S 1

Band Saw-Horizontal Doall Room 146B 546-01134 1

Shear Lodge & Shipley Room 146B 44099 1

Pipe Threading Machine Ridged Room 146B EC10562J95 1

Pedestal Grinder Baldor Room 146B P7-94-1 1

Pedestal Grinder Baldor Room 146B P7-94-2 1

Band Saw-Horizonal Doall Room 146B 173-63522 1

Band Saw-Vertical Metalmizer Room 146B MS0695356 1

Band Saw-Horizontal Jet Model MBS-10M Room 146B 507840309 1

Iron Worker Metal Muncher Model #MM61E Room 146B 2997381 1

Hydraulic Press 30 Ton Model Room 146B C-1608 1

Drill Press Clausing Room 146B 127558 1

6.3 NON-DESTRUCTIVE METAL TESTING.

Preventive and corrective maintenance will be performed at all times other than the documented shut-down periods.

EQUIPMENT MANUFACTURER LOCATION SERIAL QTY

X-Ray Machine Vault 1 Pantec 93100587EC 1

X-Ray Machine Vault 2 Pantec 93100625EC 1

X-Ray Machine Vault 3 Pantec 92110135EC 1

X-Ray Machine Vault 4 Pantec 92030131EC 1

X-Ray Machine Vault 5 Pantec 92040133EC 1

X-Ray Machine Vault 6 Pantec 92080134EC 1

Mag particle testing machine Gould-Bass 1500 Core Lab Room B06 930017 1

Mag particle testing machine Gould-Bass 1500 Core Lab Room B06 930018 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930019 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930020 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930021 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930022 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930023 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930024 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930025 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930026 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930027 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930028 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930029 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930030 1

Mag Particle testing machine Gould-Bass 1500 Core Lab Room B06 930031 1

Mag Particle testing machine Gould-Bass Core Lab Room B06 930032 1

P-70 mag particle testing machine Magnaflux Core Lab Room B06 93140 1

P-70 mag particle testing machine Magnaflux Core Lab Room B06 93141 1

P-70 mag particle testing machine Magnaflux Core Lab Room B06 93142 1

P-70 mag particle testing machine Magnaflux Core Lab Room B06 93143 1

P-70 mag particle testing machine Magnaflux Core Lab Room B06 93144 1

P-70 mag particle testing machine Magnaflux Core Lab Room B06 93145 1

P-70 mag particle testing machine Magnaflux Core Lab Room B06 93146 1

Eye Wash Station Core Lab Room B06 N/A 1

Eye Wash Station Core Lab Room B27 N/A 1

Eye Wash Station Core Lab Room B35 N/A 1

7.0 LINES OF DEMARCATION.

Contractor shall maintain equipment that commences at the load side of the main facility power panel for each weld booth, arc lab, gas and cutting lab ventilation and the equipment hard wired into such a panel.

If the equipment is plugged into a power receptacle, then the Contractor shall maintain this equipment starting at this power plug. Contractor shall also maintain all piping, valves and components oxygen, acetylene and compressed air systems in arc, gas and cutting labs. Contractor shall maintain each individual component of the technical training equipment, which includes, but not limited to items identified in Appendix B-1, Attachment 2, and all equipment, components, interconnecting cabling, and target mounting hardware. Government will maintain the facility power distribution.

ATTACHMENT (3)

MACHINERY REPAIRMAN (MR) MAINTENANCE

1.0 DESCRIPTION. Consists of Machinery Repairman School preventative and corrective maintenance

Building 523

TITLE: Machinery Repairman (MR)

Maintenance

SERIAL #: None

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

55A 9.0 0700 1600 N/A N/A N/A N/A

55B 13.0 0700 2000 N/A N/A N/A N/A

55C 5.0 0700 1200 N/A N/A N/A N/A

Machinery Repairman TTE is used for 9 hours /day for 48-50 weeks / year

4.0 PROJECT LIST.

4.1 MACHINERY REPAIRMAN MAINTENANCE.

ITEM PROJECT MINIMUM ON HAND

6”x 6” x ¼” Mild Steel Plate Cutting Flanges 36 per quarter

5.0 EQUIPMENT AND PARTS LIST.

5.1 MACHINERY REPAIRMAN MAINTENANCE.

Preventative and corrective maintenance will be performed on the following equipment: MIP 6612/054

A-1 Clean Coolant Screen and Reservoir, Renew Coolant is added to the pumps connected to the

Colchester lathes.

GRINDERS

EQUIPMENT LOCATION QTY REMARKS

Bench Grinder 1 MR School 1 Used Tool Line 2728783

Bench Grinder 2 MR School 1 Used Tool Line 34774

Bench Grinder 3 MR School 1 Used Tool Line 2729198

Bench Grinder 4 MR School 1 Used Tool Line 2729102

Bench Grinder 5 MR School 1 Used Tool Line 2729016

Bench Grinder 6 MR School 1 Used Baldor W0105

Bench Grinder 7 MR School 1 Used Tool Line 2714115

Bench Grinder 8 MR School 1 Used Baldor W0105

Bench Grinder 9 MR School 1 Used Tool Line 2728782

Bench Grinder 10 MR School 1 Used Tool Lone 805251

Bench Grinder 11 MR School 1 Used Tool Line 805251

Bench Grinder 12 MR School 1 Used Tool Line 2720929

Carbide Grinder MR School CG-1 1 Used Baldor P8-91

Tool / Cutter Grinder MR School 1 Used K.O. LEE 25760XD

Surface Grinder MR School 1 K.O. LEE 25613-WL

Drill Grinder MR School 1 Sterling DG5653

Drill Press 1 MR School 1 Wilton 31004

Drill Press 2 MR School 1 Wilton 310108

Drill Press 3 MR School 1 Wilton 310105

Drill Press 4 MR School 1 Wilton 308094

Drill Press 5 MR School 1 Wilton 308093

Drill Press 6 MR School 1 Wilton 308091

Drill Press 7 MR School 1 Wilton 308095

Drill Press 8 MR School 1 Wilton 308092

MISCELLANEOUS MACHINES

Butt Welder MR School 4 1 Used Doall 471-943186

Vertical Bandsaw MR School BS 29 1 Used Doall 423474

Horizontal Bandsaw MR School BS 204 1 Used Jet 508840323

Horizontal Bandsaw MR School BS 207 1 Used W.F. Wells

A2005F887325

Torit Dust Collector MR School 1 Torit- IG377835-001

MILLING MACHINES

Milling Machine 5 MR School 1 Used Cincinnati 2J2U1Z-76

Milling Machine 6 MR School 1 Used Cincinnati 5J2P5U-13

Milling Machine 7 MR School 1 Used Cincinnati 2J2PLY-56

Milling Machine 8 MR School 1 Used Cincinnati 2J2P1Z-108

Milling Machine 10 MR School 1 Used Cincinnati 4A2P1Y-80

Milling Machine 11 MR School 1 Used Cincinnati 4A2P5A-32

Milling Machine 12 MR School 1 Used Cincinnati 5J2PU-5

Milling Machine 15 MR School 1 Used Brown/Sharpe 501-2-6

Milling Machine 16 Tool Room MR School 1 Used Bridgeport J-202379

LATHES

Colchester 1 MR School 1 Used Eqpt. 306026

Colchester 2 MR School 1 Used Eqpt. 306075

Colchester 3 MR School 1 Used Eqpt. 306087

Colchester 4 MR School 1 Used Eqpt. 306071

Colchester 5 MR School 1 Used Eqpt. 306082

Colchester 6 MR School 1 Used Eqpt. 306086

Colchester 7 MR School 1 Used Eqpt. 306074

Colchester 8 MR School 1 Used Eqpt. 306048

Colchester 9 MR School 1 Used Eqpt. 306110

Colchester 10 MR School 1 Used Eqpt 306019

Colchester 11 MR School 1 Used Eqpt. 306089

Colchester 12 MR School 1 Used Eqpt. 306078

6.0 MACHINERY REPAIRMAN MAINTENANCE. Only On Call Corrective Maintenance will be performed on the following equipment for the period 01 January through 30 April for each Fiscal Year of the contract. Both preventative and corrective maintenance will be performed for the remainder of each

Fiscal Year.

BENCH GRINDERS

Bench Grinder 13 MR School 1 Used Tool Lone 07421

Bench Grinder 14 MR School 1 Used Tool Lone 306087

Bench Grinder 15 MR School 1 Used Tool Lone 2729060

Bench Grinder 16 MR School 1 Used Tool Lone 2792051

Bench Grinder 17 MR School 1 Used Tool Lone 2729009

6.0 MACHINERY REPAIRMAN MAINTENANCE (Con’t)

BENCH GRINDERS

Bench Grinder 18 MR School 1 Used Tool Lone 2713925

Bench Grinder 19 MR School 1 Used Tool Line 2729110

Bench Grinder 20 MR School 1 Used Tool Line 2729037

Bench Grinder 21 MR School 1 Used Tool Line 7414

Bench Grinder 22 MR School 1 Used Tool Line 2714106

Bench Grinder 23 MR School 1 Used Baldor MW0100

Bench Grinder 24 MR School 1 Used Baldor F275

Bench Grinder 25 MR School 1 Used Tool Lone 2729101

Belt/Disk Sander 27 MR School 1 New Wilton 06050082

DRILL PRESSES

Drill Press 17 MR School 1 Used Cincinnati Bickford

1R4718

Colchester 13 MR School 1 Used Eqpt. 306079

Colchester 14 MR School 1 Used Eqpt. 306084

Colchester 15 MR School 1 Used Eqpt 306745

Engine Lathe 25 MR School 1 Used Lodge & Shipley 51338F

Milling Machine 13 A7020019 621 MR School 1 Used Cincinnati 2JPIW-86

Milling Machine 14 A7020019 621 MR School 1 Used Cincinnati 2JJ2UIZ

Miller Welding Machine MR School 1 Miller- JG103946

7.0 MACHINERY REPAIRMAN LAY UP MAINTENANCE

Pedestal Grinder 26 MR School 1 Used Dayton 200109

Hydraulic Press MR School 1 Used Dake 184042

Bench Grinder MR School 1 Used Wissota W-10-87

DRILL PRESSES

Drill Press 9 A7020019 621 MR School 1 Wilton 6060059

Drill Press 10 A7020019 621 MR School 1 Wilton 6060032

Drill Press 11 MR School 1 Rikon 04307Q0077

Drill Press 12 A7020019-621 MR School 1 Rikon 04307Q0068

Drill Press 13 A7020019-621 MR School 1 Delta 18-ZLA

Drill Press 14 MR School 1 Delta 18XLB

Drill Press 15 A7020019 621 MR School 1 Wilton 134930

Drill Press 16 MR School 1 Used Jet 5080364

Drill Press 18 MR School 1 Used Cleerman 14438

Colchester 16 MR School 1 Used Eqpt. 306091

Colchester 17 MR School 1 Used Eqpt. 301847

Colchester 18 MR School 1 Used Eqpt. 301862

Colchester 19 MR School 1 Used Eqpt. 301862

Colchester 20 MR School 1 Used Eqpt. 301863

Colchester 21 MR School 1 Used Eqpt. 301866

Colchester 22 MR School 1 Used Eqpt. 301028

Colchester 23 MR School 1 Used Eqpt. 301033

Colchester 24 MR School 1 Used Eqpt. 301858

Engine Lathe 26 MR School 1 Used Lodge & Shipley 51277F

Engine Lathe 27 MR School 1 Used Lodge & Shipley 51337F

Engine Lathe 30 MR School 1 Used LeBond 12C-1415

Milling Machine 1 MR School 1 Used Cincinnati 2J2U1Z-74

Milling Machine 2 MR School 1 Used Cincinnati 5J2P5J-3

Milling Machine 3 MR School 1 Used Cincinnati 2J2P1Y-12

Milling Machine 4 MR School 1 Used Cincinnati 2J2U5L-37

Milling Machine 9 MR School 1 Used Cincinnati 2J2P1Y-105

8.0 LINES OF DEMARCATION.

The Contractor shall maintain equipment that commences at the load side of the main facility power panel. If the equipment is plugged into a power receptacle, then the Contractor shall maintain this equipment starting at this power plug. The Contractor shall also maintain all piping and valves. The

Contractor shall maintain each individual component of the technical training equipment which includes, but not limited to, items identified in Appendix B-1, Attachment 3 and all equipment, components, interconnecting cabling and target mounted hardware. The Government will maintain the facility power distribution.

ATTACHMENT (4)

STEAM DIVISION MAINTENANCE/REPAIR

1.0 DESCRIPTION. Corrective and preventive maintenance for equipment listed in 4.2.

Building 239 – Room 103A

Building 239 – Steam Propulsion Plant

TITLE: Steam Division Maintenance/Repair SERIAL #: None

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

56A 7.5 0700 1430 N/A N/A N/A N/A

56B 11.5 0700 1830 N/A N/A N/A N/A

56C 3.5 0700 1030 N/A N/A N/A N/A

Steam School TTE is used for 7.5 hours /day for 48-50 weeks / year

4.0 GOVERNMENT FURNISHED EQUIPMENT AND PARTS LIST

4.1 Room 103A - Government Furnished Property

NOTE: The following Government Furnished Test Equipment does NOT require maintenance, but does require calibration/repair in accordance with paragraph 4.12.2

EQUIPMENT SERIAL # LOCATION QTY

Hydro-Pump Pneum 9035 RM 103A 1

Hydro-Pump Pneum 9013 RM 103A 1

Hydro Stand 2574-1 RM 103A 1

4.2 STEAM PROPULSION PLANT TRAINER (PPT)

NOTE: Preventive and corrective maintenance is required on the following equipment:

EQUIPMENT SERIAL # LOCATION QTY

2JV Sound Powered Phones Fire Room Upper A/B 2

2JV Sound Powered Phones Feed Tanks 1

2JV Sound Powered Phones Fire Room Console 1

2JV Sound Powered Phones Fire Room Lower 1

System, Electrical Lighting Distribution Various 1

System, Electrical Switchboard Various 1

ATTACHMENT (4)

STEAM DIVISION MAINTENANCE/REPAIR

5.0 LINES OF DEMARCATION

Contractor shall maintain the electrical distribution system to all equipment that commences on building entry to the main facility power panel to each piece of equipment is hardwired from to include but not limited to the load panel. If the equipment is plugged into a power receptacle, then the Contractor shall maintain this equipment starting at this power plug.

ATTACHMENT (5)

MECHANICAL, ELECTRICAL AND ELECTRONIC CALIBRATION

1.0 DESCRIPTION. Consists of Mechanical, Electrical and Electronic Calibration

1.1 MEASURE INTERACTIVE QUERY (MIQ). The MIQ Report identifies all equipment at TSC requiring calibration. This report contains information of the equipment, i.e. identification numbers, nomenclature, calibration date information, school lab. Both Mechanical Calibration Laboratory and

Electronic/Electrical Calibration Laboratory at TSC are responsible to calibrate all test equipment. Mid-

Atlantic Regional Maintenance Center (MARMC), Norfolk or the appropriate center receives all MIQ reports and certifies our calibration technicians on site at TSC. This report is part of the Material Support

Package.

Building 236 – Mechanical/Electrical/Electronic Calibration

TITLE: Mechanical, Electrical and Electronic

Calibration

SERIAL #: None

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

57A 9.0 0700 1600 N/A N/A N/A N/A

57B 13.0 0700 2000 N/A N/A N/A N/A

57C 5.0 0700 1200 N/A N/A N/A N/A

NOTE: Operational Hours per Day (OHPD)

Mechanical, Electrical and Electronic Calibration TTE is used for 9 hours /day for 48 weeks

/ year

4.0 LIST OF STANDARDS.

4.1 MECHANICAL CALIBRATION.

Model # Nomenclature Manufacture Qty

1105T Gage Tool Kit Dresser 2

1127-2 Pump Unit Datametrics 5

1433N Decade Resistor Genrad 1

23-00-61G Toolmakers Flat Starrett 1

230P301 Electronic Height Gage Federal 1

2400 Height Stand Federal 1

2455 Gage King Nutronics 23

3112 Pressure Gage Tester King Nutronics 1

3460-117-1 Nitrogen Supply Regulator King Nutronics 1

3460-55-1 Pressure Test Stand King Nutronics 1

3461 Control Unit/Accessory Kit King Nutronics 1

350 Pressure Gage Tester King Nutronics 1

3604-1-101 Thermo Unit King Nutronics 2

3605-1-101 Thermo Unit King Nutronics 4

3657-1-1 Portable Comparator King Nutronics 3

3657-1-5 Hand Pump King Nutronics 3

3657-48-1 Adapter Kit King Nutronics 1

3666-10K1 Control Unit King Nutronics 1

3666-10K1 Intensifier/Accessory Kit King Nutronics 1

3666-2K1 Control Unit/Accessory Kit King Nutronics 1

5 lb. Weight Pan NSWC Corona 1

50 Micrometer Maintenance Kit Van Keuren 1

Model # Nomenclature Manufacture Qty

56912-66A123 Thermohumidigraph Bristol-Babcock 1

56912-70A124 Thermohumidigraph Bristol-Babcock 1

599-7041 Accessory Kit Brown/Sharpe 1

701-114 Granite Surface Plate Brown/Sharpe 1

716 Dial Indicator Calibrator Starrett 1

B Supermicrometer Pratt & Whitney 1

C2 Monochromatic Light Van Keuren 1

CC Gage King Nutronics 10

D-77 Class C Weight Set Naval Warfare 1

N-11-ECS-3A Tachometer Tester Quantum Dynamics 1

N-11-ES18 Speed Increaser Quantum Dynamics 2

N-11-ESR4 Speed Increaser Quantum Dynamics 1

OP2B Optical Flat Van Keuren 2

RS36A1 Rectangular Gage Block Set Starrett 1

SS81A1X Square Gage Block Set Starrett 1

SXC Deburring Stone Starrett 1

TSD 111-010 Torque Cell AKO Torque 1

TSD 111-100 Torque Cell AKO Torque 1

TSD 111-200 Torque Cell AKO Torque 1

TSD-1002-12 3/4 inch Torque Plate AKO Torque 1

TSD-1002-16 1 inch Torque Plate AKO Torque 1

TSD-1002-6 1/4 inch Torque Plate AKO Torque 1

TSD-1002-8 1/2 inch Torque Plate AKO Torque 1

TSD2011 Torque Cell AKO Torque 1

TSD6000-4 Torque Master AKO Torque 1

4.2 ELECTRICAL/ELECTRONIC CALIBRATION

Model # Nomenclature Manufacture Qty

015-0310-01 Comparator Head Tektronix 2

015-0385-00 Diplexer Tektronix 1

015-0611-00 Pulse Head Tektronix 1

015-0611-01 Pulse Head Tektronix 1

015-2350-01 Amplitude Level Head Tektronix 1

067-0529-00 Voltage Divider Tektronix 2

0874-9099 Adapter Kit Genrad 2

1040C Panel Meter Calibrator Arbiter 1

114A Pulse Generator HP 1

11667A Power Divider HP 1

11683A Range Calibrator HP 1

11708A Attenuator HP 2

11722A Sensor Module HP 1

11792A Power Sensor HP 1

Model # Nomenclature Manufacture Qty

11793A Microwave Converter HP 1

1395A1-9 Therm Voltmeter Ballentine 1

1395A3-9 Therm Voltmeter Ballentine 1

1395A4-9 Therm Voltmeter Ballentine 1

1395A6-9 Therm Voltmeter Ballentine 1

1432N Decade Resistor Genrad 1432N

1433N Decade Resistor Genrad 1

1433B Decade Resistor Genrad 1

1433M Decade Resistor Genrad 1

1433T Decade Resistor Genrad 1

1433Y Decade Resistor Genrad 1

1450TB Attenuator Genrad 1

145-S-872 Function Generator Wavetek 2

1506A Power Divider Weinschel 1

1722A/AP Instrument Controller Fluke 3

175AV Multimeter Keithley 1

211B Square Wave Generator HP 1

2-30 Attenuator Weinschel 2

240C Decade Resistor Clarostat 1

2465B Oscilloscope Tektronix 3

323-07M40 True RMS Voltmeter Ballentine 1

3440A RF Millivoltmeter Ballentine 1

3501-1000 Distortion Analyzer Amber 1

355C01 Attenuator HP 1

355D Attenuator HP 1

400F Voltmeter HP 1

415E SWR Meter HP 2

4200-4E Power Sensor Boonton 1

4200-6E Power Sensor Boonton 1

4200S21 Microwattmeter Boonton 1

432A Power Meter HP 1

436A22 Power Meter HP 1

466WX Oscilloscope Tektronix 1

5220A Transconductance Amp Fluke 1

5334B/H05 Frequency Counter HP 2

5340A01 Frequency Counter HP 1

545CCN1402 Frequency Counter EIP Microwave 1

5691266A113 Thermohumidigraph Bristol Babcock 1

5691266A123 Thermohumidigraph Bristol Babcock 1

5700A/AN Meter Calibrator Fluke 2

5725A Calibrator Amplifier Fluke 1

6060A/AN Signal Generator Fluke 3

6205B Power Supply HP 1

Model # Nomenclature Manufacture Qty

6296A Power Supply HP 1

6852 Decade Resistor Shallcross 1

720A Voltage Divider Fluke 1

72-6345-1 Decade Resistor AVO Biddle 2

80J10 Current Shunt Fluke 2

80K40 High Voltage Probe Fluke 1

80TK Thermocouple Module Fluke 1

8406A Frequency Comb Generator HP 1

845AB Null Detector Fluke 1

8477A Power Meter Calibrator HP 1

8478B Thermistor Mount HP 1

8481A Power Sensor HP 3

8482A Power Sensor HP 1

8484A Power Sensor HP 2

8491A Attenuator HP 1

8491B Attenuator HP 1

8505A Multimeter Fluke 1

8562A Spectrum Analyzer HP 1

8562A Spectrum Analyzer HP 1

8620C Sweep Oscillator HP 1

86290A RF Sweep Plug in HP 1

8640B1-2-3 Signal Generator HP 1

8671B Signal Generator HP 1

8840A/AA Digital Multimeter Fluke 1

8840A/AA Digital Multimeter Fluke 2

8902AE02 Measuring Receiver HP 1

8902AE41 Measuring Receiver HP 1

8903A Audio Analyzer HP 1

8904A Multifunction Synthesizer HP 1

8904A06H16 Multifunction Synthesizer HP 2

905 Coax Variable Attenuator Weinschel 1

900W50 Standard Termination Genrad 1

900WR120 Standard Mismatch Genrad 1

957A Signal Generator Wavetek 1

A007A Connector Gage Kit Maury Microwave 2

AS210A13 Frequency Calibrator Argo Systems 1

AS-6 Attenuator Set Weinschel 1

PT5 Ratio Transformer Gertsch 1

RB3MOD VSWR Bridge ANZAC 1

SG5030 Sinewave Generator Tektronix 1

SR-15 Precision Resistor EIS 1

T10AR100 Variable Resistor Beckman 1

T10AR10000 Variable Resistor Beckman 1

Model # Nomenclature Manufacture Qty

T10AR5000 Variable Resistor Beckman 1

TM5006A Prog Mainframe Tektronix 1

TM503 Power Module Tektronix 1

TM515 Power Module Tektronix 1

W10MT3A Variac Genrad 3

W5MT3A Variac Genrad 1

ATTACHMENT (6)

ELECTRONIC TECHNICIAN (ET) / INTERIOR COMMUNICATIONS (IC) / FIRE

CONTROLMAN (FC) “A” SCHOOL MAINTENANCE

1.0 DESCRIPTION. Consists of Electronic Technician (ET) / Interior Communications (IC) / Fire

Controlman (FC) “A” School Maintenance School preventative and corrective maintenance.

Building 621

TITLE: Electronic Technician (ET) / Interior

Communications (IC) / Fire Controlman (FC) “A” School

Maintenance

SERIAL #: None

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Division/

Function

Area Task OHPD From: To: From: To: From: To:

Calendar YR- Their training is currently on the first shift and will swap with FC on 01 Jan every year.

ElectTech

(ET) &

Interior

Comm.

Tech (ET &

IC “A”)

58A 9.0 0630 1530 N/A N/A N/A N/A

58B 10.0 1400 2400 N/A N/A N/A N/A

58C 2.0 0700 0900 N/A N/A N/A N/A

58D 6.0 1800 2400

N/A N/A N/A N/A

NOTE: ET & IC “A” School is used for 9 hours/day for 50 weeks/year/requiring 1 st shift maintenance support Mon-Fri

Calendar YR- Their training is currently on the second shift and will swap with ET/IC on 01 Jan every year

Firecontrol

Tech (FC

“A”)

59A 8.0 1530 2330 N/A N/A N/A N/A

59B 18.0

0600-

1600-

N/A N/A N/A N/A

59C 8.0 0700 1100 N/A N/A N/A N/A

59D 15.0

0700-

1800-

N/A N/A N/A N/A

N/A N/A N/A N/A

NOTE: (FC) ‘A” School TTE is used for 8 hours/ day for 50 weeks/year/requiring only 1 st shift maintenance support Mon-Fri

4.0 EQUIPMENT AND PARTS LIST.

4.1 ELECTRONIC TECHNICIAN (ET) / FIRE CONTROLMAN (FC) “A”

MAINTENANCE.

EQUIPMENT NOMENCLATURE QTY ROOM

SCHOOL

AM-2123A(V)U Frequency Distribution Amplifier 10 (Total) ET

7 330

3 329

AM 3729/SR Audio Amplifier 4 329 ET

AN/SRA-56 Antenna Coupler Group(4 EA per Group) 1 329 ET

AN/SRA-57 Antenna Coupler Group(4 EA per Group) 1 329 ET

AN/SRA-58 Antenna Coupler Group(4 EA per Group) 1 329 ET

AN/SRA-49B/ SB 3332 Antenna Coupler Group(4 EA per Group) 1 329 ET

AN/SSQ-88B System Quality Monitor 1 329 ET

AN/UGC-143A Teleprinter, Set 10 329 ET

CV-3510/URA-17 Converter, Signal Data 10 329 ET

CU-938/URA-38 Antenna Coupler Group 4 329 ET

AN/URT-23D Transmitting Set Radio 46 (Total) ET

(The 8 in room 311 and 14 in room 332 10 329 are in IEM Status I) 14 332

14 313

8 311

AN/WSC-3(V)6 Satellite Communications Set(UHF Transceiver) 16 312 ET

AN/WSC-3(V)7 Satellite Communications Set 8 329 ET

OA-9123/SRC Coupler Group Antenna 2 329 ET

AS-2537/SR Antenna, Whip 2 ROOF ET

AT-150/SRC Antenna, UHF 2 ROOF ET

C-1004/SG TTY Transmitter Control 10 329 ET

C-1138B/UR Control, Radio Set 4 329 ET

SA-2112(V)3/STQ Secure Audio System 1 329 ET

C-10276/SSC Control Indicator 3 329 ET

TA-970 Telephone Set 3 329 ET

CV-2460A/SGC Frequency Converter 4 329 ET

LS-474U Speaker Set 4 329 ET

4.1 ELECTRONIC TECHNICIAN (ET) / FIRE CONTROLMAN (FC) “A”

MAINTENANCE (Con’t)

EQUIPMENT NOMENCLATURE QTY ROOM/QTY

SCHOOL

R-2368A(V)1/URR Receiver, Radio 28 (Total) ET

12 329

16 330

SB-2727 Receiver Switchboard 2 329 ET

SB-863/SRT XMTR Switchboard 3 329 ET

SB-3189A TTY DC Patch Panel 4 329 ET

AM-7115A/UP Radar Video Amplifier 18 (Total) ET/FC

3 335

3 304

12 350D

AM-7116A/UP Radar Trigger Amplifier 2 350D ET/FC

AN/SPA-25G Indicator, Azimuth-Range 32 (Total) ET/FC

14 350C

14350E

4 350D

AN/SPS-T3 Trainer, Radar 1 350D ET/FC

AN/SPS-64(V)9 Radar Search 16 (Total) ET/FC

14 335

(Includes Antenna Pedestal and Array for each) 2 350D

AN/SPS-67(V)1 Radar, Surface Search 2 350D ET/FC

(Includes Antenna Pedestal and Array for each)

CV-3989/SP Converter, Data 7 350D ET/FC

SB-4229/SP Radar Switchboard 6 350D ET/FC

AS-3194/SPS-64 Radar Surface Search

(was array & pedestal) 2 350D ET/FC

4.2 INTERIOR COMMUNICATIONS “A” SCHOOL MAINTENANCE 621

Contractor shall provide preventative and corrective contract maintenance

EQUIPMENT NOMENENCLATURE QTY ROOM

Microphone Control Station 2 112

ICSM Alarm Panel 1 112

Loudspeaker 5 112

Synchro Trainers 4 114

OCS Group Alarm Contact Maker 5 112

Mercury Switch 3 114

Air Flow Indicating Panel 1 114

Air Flow Indicating Panel 1 114

917-1-002 Air Flow Sensor 2 114

AM-2316D/SIC Amplifier Group, AUDIO FREQ. 1 112

AN/SIA-114B AMPR. OSCILLATOR GROUP 1 112

AM-2210G/WTC AUDIO AMPLIFIER 1 114

4.2 INTERIOR COMMUNICATIONS “A” SCHOOL MAINTENANCE 621 (Cont)

EQUIPMENT NOMENENCLATURE QTY ROOM

IC/E1D1 BUS FAILURE ALARM SIGNAL 1 112

IC/SM 10-10 ALARM SWITCHBOARD 2 112

IC/RH FLOAT SWITCH 1 112

IC/RL FLOAT SWITCH 3 112

IC/J 105 HEAT IND. 3 112

222-10 DETROIT SWITCH 2 (Total) 1 112

1 114

IC/DM-1-0 DOOR SWITCH 2 112

IC/D GROWLER 6 (Total) 3 112

3 114

POWER SECT. IC SWITCHBOARD 1 112

ACO SECT. IC SWITCHBOARD 1 112

IC/9UC46-1 POT INDICATOR-TRANSMITTER1 1 112

IC/7UE 44-1B EOT INDICATOR-TRANSMITTER1 1 112

IC/30D01-1A SHIPS CONTROL CONSOLE 1 112

5.0 LINES OF DEMARCATION.

Contractor shall maintain equipment that commences at the load side of the main facility power panel for each Watchstation Trainer if the equipment is hard wired into such a panel. If the equipment is plugged into a power receptacle, then the Contractor shall maintain this equipment starting at this power plug.

Contractor shall also maintain each individual component of the technical training equipment, which includes, but not limited to items identified in Appendix B-1, Attachment 6, and all equipment, components, interconnecting cabling, and target mounting hardware. Government will maintain the facility power distribution.

ATTACHMENT (7)

GUNNER’S MATE (GM) “A” SCHOOL MAINTENANCE

1.0 DESCRIPTION. Consists of Gunnery School preventative and corrective maintenance

Building 621

TITLE: Gunner’s Mate (GM) “A” School

Maintenance

SERIAL #: None

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

Calendar YR- Their training is currently on the second shift and will swap with ET/IC on 01 Jan every year.

60A 8.0 1530 2330 N/A N/A N/A N/A

60B 12.0 0700 1900 N/A N/A N/A N/A

60C 4.0 0700 1100 N/A N/A N/A N/A

60D 8.0 0700 1500 N/A N/A N/A N/A

NOTE: Operational Hours per Day (OHPD)

Gunner’s Mate (GM) “A” School Maintenance TTE is used for 8 hours /day for 50 weeks / year requiring only 1 st shift maintenance support Mon-Fri

4.1 GM “A” SCHOOL MAINTENANCE.

EQUIPMENT/PART QTY SERIAL NUMBER(S) LOCATION

Ingersoll Rand LP Compressor, Model 7100 1 4033514 Bldg. 621, Basement

Ingersoll Rand HP Compressor, Model 15T4 1 873359 Bldg. 621, Basement

Ingersoll Rand LP Dryer 1 26699900003 Bldg. 621, Basement

Ingersoll Rand HP Dryer, Model 1SS3000BA100 1 238873 Bldg. 621, Basement

Oil/Water Separator 1 Bldg. 621, Basement

Magazine Sprinkler System, Model 3-Way 2 Bldg. 621, RM 138

MK 46 Exer. Trainer (Rextorp) 1 RT 0731 Bldg. 621, RM 138

MK 54 Exer. Trainer (Rextorp) 1 54T504 Bldg. 621, RM 138

MK 9 Loading Tray & Acces. 2 1 Bldg. 621, RM 138

434 Bldg. 621, RM 138

MK 432 Mod 2 Test Set 1 931 Bldg. 621, RM 138

MK 432 Mod 4 Test Set 2 4421 Bldg. 621, RM 138

4395 Bldg. 621, RM 138

MK 432 Mod 6 Test Set 1 6202 Bldg. 621, RM 138

MK 1 Mod 1 Breech Mechanism 6 L32921 Bldg. 621, RM 138

L33357 Bldg. 621, RM 138

L33189 Bldg. 621, RM 138

L32927 Bldg. 621, RM 138

L32929 Bldg. 621, RM 138

L33671 Bldg. 621, RM 138

Wallace Gantry, Model S2T12-205 2 Bldg. 621, Rm 138

Yale Air Hoist, Model 2000 1 CB 011 Bldg. 621, Rm 138

MK 32 SVTT Mod 14 1 1721 Bldg. 621, Rm 138

MK 32 SVTT Mod 15 1 3007 Bldg. 621, RM 138

MK 32 SVTT Mod 17 3 Bldg. 621, RM 138

MK 32 SVTT Mod 19 1 2486 Bldg. 621, RM 138

MK 60 Mod 0 Bulkhead Mounted

Control Box 1 L43455 Bldg. 621, RM 138

MK 50 Rextorp 1 21 Bldg. 621, RM 138

MK 437 Presetter 4 220 Bldg. 621, RM 138

338 Bldg. 621, RM 138

16 Bldg. 621, RM 138

122 Bldg. 621, RM 138

MK 24 Dolly W/137 Adapter 1 186 Bldg. 621, RM 138

MK 106 Nylon Sling 6 Bldg. 621, RM 138

4.1 GM “A” SCHOOL MAINTENANCE (Con’t)

EQUIPMENT/PART QTY SERIAL NUMBER LOCATION

Power Supply 28 VDC, Model 19200-101 2 Bldg. 621, RM 138

MK 21 Dolly 6 Bldg. 621, RM 138

MK 46 Torpedo W/H Dummy 1 481115 Bldg. 621, RM 138

MK 46 Torpedo Exer. Trainer 1 48-1023 Bldg. 621, RM 138

MK 45 Handlift Truck 2 16 Bldg. 621, RM 138

79 Bldg. 621, RM 138

Operator Control Box 1 Bldg. 621, RM 138

MK 309 Control Panel 1 73 Bldg. 621, RM 138

Canister Weight 1 P-26 Bldg. 621, RM 138

MK 429 Mod 1 Air Charging Station 1 69 Bldg. 621, RM 138

Fire Arms Training Simulator (FATS) Air Lines 3* Bldg. 621

*NOTE: 2 in small arms and 1 crew served lab

The Contractor shall maintain all pneumatic and hydraulic pumps and motors for each TTE system and the TTE itself. All facility or external TTE piping into the TTE systems will be maintained by the government. All piping systems that are internal to the TTE shall be maintained by the Contractor. The contract shall maintain the FATS lines inclusive of all of the lines leading from the air compressor up and to and including the gun manifolds. Contractor shall maintain equipment that commences at the load side of the main facility power panel for each workbench and the equipment hard wired into such a panel. If the equipment is plugged into a power receptacle, then the Contractor shall maintain this equipment starting at this power plug. Contractor shall also maintain each individual component of the technical training equipment, which includes, but not limited to items identified in Appendix B-1, Attachment 7, and all equipment, components, interconnecting cabling, and target mounting hardware. Government will maintain the facility power distribution.

ATTACHMENT (8)

INTERIOR COMMUNICATIONS (IC) TECHNICIAN “C” SCHOOL

1.0 DESCRIPTION. Consists of Interior Communications (IC) Technician “C” School preventative and corrective maintenance as indicated.

Building 322

TITLE: Interior Communications (IC) Technician “C”

School

SERIAL #: None

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Division/

Function Area Task OHPD From: To: From: To: From: To:

IC “C” Vistol 61A 6.0 0700 1300 N/A N/A N/A N/A

61B 10.0 0700 1700 N/A N/A N/A N/A

61C 2.0 0700 0900 N/A N/A N/A N/A

NOTE: Interior Communications “ C” School VISTOLTTE is used for 6 hours /day for 2 consecutive weeks 2-3 times/ year

IC “C”

SITES/ILARTS

63A 6.0 0700 1300 N/A N/A N/A N/A

63B 10.0 0700 1700 N/A N/A N/A N/A

63C 2.0 0700 0900 N/A N/A N/A N/A

NOTE: Interior Communications “C” School SITES/ ILARTS TTE is used for 6 hours /day for 18 consecutive overlapping class weeks 4-6 times / year

IC “C” FODMS 64A 6.0 0700 1300 N/A N/A N/A N/A

64B 10.0 0700 1700 N/A N/A N/A N/A

64C 2.0 0700 0900 N/A N/A N/A N/A

NOTE: Interior Communications “C” School FODMS/ TTE is used for 6 hours /day for 8 consecutive weeks 4-5 times 48 weeks / year

IC “C” DMS

Degaussing

65A 6.0 0700 1300 N/A N/A N/A N/A

65B 10.0 0700 1700 N/A N/A N/A N/A

65C 2.0 0700 0900 N/A N/A N/A N/A

NOTE: Interior Communications “C” School DMS/TTE is used for 6 hours/day for 8 consecutive weeks

3-5 times/year

IC “C” WSN2

66A 6.0 0700 1300 N/A N/A N/A N/A

66B 10.0 0700 1700 N/A N/A N/A N/A

66C 2.0 0700 0900 N/A N/A N/A N/A

NOTE: Interior Communications “C” School WSN2/TTE is used for 6 hours/day for 3 consecutive weeks 2-3 times /year

4.0 EQUIPMENT AND PARTS LIST

4.1 INTERIOR COMMUNICATIONS TECH MAINTENANCE

LOCATION NOMENCLATURE QTY MAINTENANCE

C-206 WSN-2 AN/WSN-2 Gyro Set 2 PMS & CM

C-206 WSN-2 IMU MX-9904/ WSN-2 7 PMS & CM

C-206 WSN-2 Pitch & Roll Assembly 1 PMS & CM

C-206 WSN-2 SEACOR Repeater Console 2 PMS & CM

C-207 ILARTS Audio Amplifier 2 PMS & CM

C-207 ILARTS 32 x 1 Pushbutton Panels 1 PMS & CM

C-207 ILARTS 32 x 32 Remote Pushbutton Panel 2 PMS & CM

C-207 ILARTS Audio Distribution Amp 1 PMS & CM

C-205 ILARTS Audio Interface Panel 1 PMS & CM

C-205 ILARTS Audio Changeover Switch 1 PMS & CM

C-207 ILARTS Camera Assembly 5 PMS & CM

C-207 ILARTS Centerline Camera Housing Assembly 2 PMS & CM

C-207 ILARTS Data Generator 1 PMS & CM

C-207 ILARTS Electronic Crosshair Stabilization System 1 PMS & CM

C-207 ILARTS Equipment Control Panel 1 PMS & CM

C-207 ILARTS Equipment Interface Panel 1 PMS & CM

C-207 ILARTS Ethernet Assembly 1 PMS & CM

C-207 ILARTS LCD, 17” with Quad Splitter 1 PMS & CM

C-207 ILARTS LENS Remote (ZM/FOC/IRIS) 3 PMS & CM

C-207 ILARTS Spot 7 Control RM Junction Box 1 PMS & CM

C-207 ILARTS Spot 7 Camera Junction Box 1 PMS & CM

C-207 ILARTS Power Interface Panel 5 PMS & CM

C-207 ILARTS Monitor, Waveform 2 PMS & CM

C-207 ILARTS Multi Windows Display Processor 1 PMS & CM

C-207 ILARTS Pan/Tilt Assembly 1 PMS & CM

C-207 ILARTS Pan/Tilt Controler 3 PMS & CM

C-207 ILARTS Pan/Tilt Lens Remote 3 PMS & CM

C-207 ILARTS Panel, Quad 4” LCD Rackmount 2 PMS & CM

C-207 ILARTS Quad View (Manf RGB Spectrum) 1 PMS & CM

C-207 ILARTS Rack Mount dual 8.9” LCD Panel 1 PMS & CM

C-207 ILARTS Rack Mount Keyboard/15” TFT Monitor 1 PMS & CM

C-207 ILARTS Sony DVCAM Player Recorder 2 PMS & CM

C-207 ILARTS SYNC Generator 1 PMS & CM

4.1 INTERIOR COMMUNICATIONS TECH MAINTENANCE (Con’t)

C-207 ILARTS UXGA Recorder 1 PMS & CM

C-207 ILARTS Video Distribution Amp 1 PMS & CM

C-207 ILARTS Video Mirror Pair 1 PMS & CM

C-207 ILARTS Video Routing Switcher 1 PMS & CM

C-207 ILARTS VTR Remote Control 1 PMS & CM

C-204, C-206 Input/Output Unit 3 PMS & CM

E-206 Input/Output Unit 2 PMS & CM

SW end of BLDG TV-DTS Dome 1 PMS

SW end of BLDG TV-DTS Pedestal 1 PMS

SW end of BLDG TV-DTS Dish 1 PMS

SW end of BLDG TV-DTS LNB 1 PMS

SW end of BLDG TV-DTS Inertial Measuring Unit 1 PMS

SW end of BLDG TV-DTS Servo Drive Unit 1 PMS

SW end of BLDG TV-DTS Uninterruptible Power Supply 1 PMS

SW end of BLDG TV-DTS Antenna Control Unit 1 PMS

W-203 SITE 300 Compressor/Limiter 2 PMS

W-203 SITE 300 Fan 2 PMS

W-203 SITE 300 TV Modulator Assembly 2 PMS

W-203 SITE 300 FM Modulator Assembly 2 PMS

W-203 SITE 300 RF Panel 2 PMS

W-203 SITE 300 RF Combiner 2 PMS

W-203 SITE 300 Antenna Control Unit 2 PMS

W-203 SITE 300 Computer 2 PMS

W-203 SITE 300 DTS Satellite Receiver 8 PMS

W-203 SITE 300 Keyboard 2 PMS

W-203 SITE 300 Multi-switch 2 PMS

W-203 SITE 300 Monochrome Monitor 6 PMS

W-203 SITE 300 Demodulator/Tuner 2 PMS

W-203 SITE 300 Color Monitor 4 PMS

W-203 SITE 300 Sony 8mm VCR 4 PMS

W-203 SITE 300 Audio/Video Switcher 2 PMS

W-203 SITE 300 Titler 2 PMS

W-203 SITE 300 Patch Panel 2 PMS

W-203 SITE 300 DVD Player / VHS VCR 2 PMS

W-203 SITE 300 Uninterruptable Power Supply 2 PMS

W-203 SITE 300 NDVD Player 4 PMS

W-203 SITE CKT 27 TV Patch Panel 1 PMS

W-203 SITE CKT 27 Blonder Tongue Port Amplifier 1 PMS

W-203 SITE CKT 27 Amplifier 1 PMS

W-203 SITE CKT 27 Demodulator 12 PMS

W-203 SITE CKT 27 Modulators 12 PMS

W-203 SITE CKT 27 Power Supply 3 PMS

W-203 SITE CKT 27 Power Distribution Panels 3 PMS

W-203 SITE CKT 27 Single Channel Bandpass Filter 1 PMS

W-203 SITE CKT 27 Television Muting-Voice Override Panel 1 PMS

W-203 SITE CKT 27 Source Combination Amplifier 1 PMS

W-203 SITE CKT 27 Forward Amplifier 1 PMS

W-203 SITE CKT 27 Return Amplifier 1 PMS

W-203 SITE CKT 27 Video Multiplexer 1 PMS

W-203 SITE CKT 27 Matrix Switcher 1 PMS

W-203 SITE CKT 27 Surveillance Combiner 1 PMS

W-203 SITE CKT 27 Audio/Video Modulator 3 PMS

C-203 SITE 400 Video Distribution Amplifier 3 PMS

C-203 SITE 400 Monochrome Monitor 12 PMS

C-203 SITE 400 Camera Control Unit 3 PMS

C-203 SITE 400 Sony 8mm VCR 6 PMS

C-203 SITE 400 DVD Player / VHS VCR 3 PMS

C-203 SITE 400 Router Power Supply 3 PMS

C-203 SITE 400 Video Patch Panel 6 PMS

C-203 SITE 400 Video Matrix 3 PMS

C-203 SITE 400 Production Switcher Electrical Assembly 3 PMS

C-203 SITE 400 Compressor / Limiter 12 PMS

C-203 SITE 400 Audio Monitor 3 PMS

C-203 SITE 400 Dual Color Monitor 12 PMS

C-203 SITE 400 Triple Color Monitor 9 PMS

C-203 SITE 400 Waveform Monitor / Vectorscope 3 PMS

C-203 SITE 400 Audio Output Modulator 3 PMS

C-203 SITE 400 Audio Mixer 6 PMS

C-203 SITE 400 Audio / Video Router 3 PMS

C-203 SITE 400 Sony Production Switcher 2 PMS

C-203 SITE 400 Grass Valley Production Switcher 1 PMS

C-203 SITE 400 Audio Patch Panel 3 PMS

C-203 SITE 400 Antenna Control Unit 3 PMS

C-203 SITE 400 Non-linear Editor 2 PMS

C-203 SITE 400 Linear Editor 1 PMS

C-203 SITE 400 Sony Editor VCR 4 PMS

C-203 SITE 400 CD Player 3 PMS

C-203 SITE 400 Direct Satellite Service Receiver 6 PMS

C-203 SITE 400 Uninterruptable Power Supply 6 PMS

C-203 SITE 400 TV Modulator Assembly 3 PMS

C-203 SITE 400 RF Combiner 3 PMS

C-203 SITE 400 RF Switch 3 PMS

C-203 SITE 400 FM Modulator 3 PMS

C-203 SITE 400 TV-DTS Computer 3 PMS

C-203 SITE 400 NDVD Player 4 PMS

C-203 SITE 400 DTS Satellite Receiver 12 PMS

E-206 Remote Multiplex 2 PMS & CM

C-204, C-206 Area Multiplexer 2 PMS & CM