N6134018R0056_APPENDIX_A-3_(C)_EWTGPAC_15_April_2018_Draft.pdf

SURFACE COMS ADDENDUM A N61340-18-R-0056

PWS # 66410-A-0448 15 April 2018

APPENDIX A-3

EXPEDITIONARY WARFARE TRAINING GROUP PACIFIC (EWTGPAC)

CORONADO, SAN DIEGO, CA

1.0 INFORMATION. This Appendix augments Surface COMS SOW Addendum A and the Surface

(Non-LCS) Supplemental Addendum AA, with specific site information requirements related to

Expeditionary Warfare Training Group Pacific (EWTGPAC) Coronado, San Diego, CA. Table 1 provides a visual overview of the document structure developed for the Surface COMS PWS from the bottom up perspective.

TABLE 1

2.0 SITE OPERATIONS AND MATERIAL SUPPORT PACKAGE (MSP) INFORMATION.

The Attachments below provide the lower level maintenance requirements, descriptions, locations and normal operating hours, subsystems / assemblies not subject to supply support, and the major hardware list for the specific Training Systems or Equipment (TS/E). Table 2 provides the list of Attachments associated with this Appendix:

Attachment TS/E S/N Title QTY

(1)* 20E19 1,2,7 Naval Gunfire Support Mobile Team Trainer 3

(2) 20G6 1 Landing Craft Air Cushion Full Mission Trainer

(LCAC FMT)

(3)* N/A TBD 7/11 M RHIB Simulator 1

(4)* TBD Combined Arms Virtual Environment (CAVE) 1

(5) 20G9 1 Virtual Environment LCAC (VELCAC) 1

(6)* 20G8F 233, 234, LCAC Classroom 3

(7)* 16B14A 1 Landing Craft Control Team Trainer 1

TABLE 2

NOTE: *On-Call Corrective Maintenance (OCCM)

2.1 TS/E NORMAL OPERATING HOURS AND SCHEDULING REQUIREMENTS. The

“Normal Operating Hours” are the hours during which the TS/E is available for government use. The normal operating hours are found in Paragraph 3.0 of the Attachments along with the Scheduling

Requirements (if any), Notes (if any), and the Task Numbers.

A Government Scheduled Utilization (GSU), otherwise referred to as a training schedule, may occur within the Operating Window. Changes to the training schedule must be provided to the Contracting

ADDENDUM A

Surface COMS

PWS 66410-A-0448

SUPPLEMENTAL ADDENDUM AA

Surface (Non-LCS)

APPENDIX A-3

EXPEDITIONARY WARFARE TRAINING

GROUP PACIFIC (EWTGPAC)

EXPEDITIONARY WARFARE TRAINING GROUP PACIFIC (EWTGPAC)

Representative (COR) and Contractor with a minimum 24-hour advance notice. Unscheduled use times within the Operating Window may be used for maintenance activities if approved by the COR.

The TS/E “Operating Window” or “Normal Operating Hours” may be shifted forward or backward by as much as four (4) hours from the hours listed in the Attachments by giving 24-hours advance notice by the COR.

The hours outside of the Operating Window are available for maintenance activities.

2.2 MATERIAL SUPPORT PACKAGE (MSP). The official copy of the GFP/GFF turned over to the Contractor (signed by Contracting Officer Representative [COR] / Site Manager) is maintained by the

COR.

2.3 GOVERNMENT FURNISHED PROPERTY (GFP). GFP consists of training system and equipment unique tools and test equipment, unique spare and repair parts, publications and technical data, consumables, and software media. Inventory listings of these items are available at each training system and equipment location.

These inventory lists are intended to identify the items of GFP expected to be placed in the custody of the

Contractor for the term of the contract in support of the performance of its contractual responsibilities.

The lists are materially accurate, though some items of necessity will change prior to turning over said assets to the Contractor.

Specific inventories of all GFP, physically verified by the Government and Contractor, shall be formally turned over to the Contractor on or about the CSD for a given TS/E, for which the Contractor shall sign for and accept their custody. These inventories shall reflect both the existence and condition of these assets, and shall become the baseline inventory and the standard against which the Contractor is measured when the GFP is returned to the Government.

2.4 GOVERNMENT FURNISHED FACILITIES (GFF). The following GFF is intended to be placed in the custody of the Contractor for the term of the contract:

Building Room Description Sq. Ft.

207 116 Simulation Laboratory 2100

207 119 Computer / Instructor 1472

207 120 Maintenance Lab 625

207 121 Storage 324

207 150 Instructor Room 272

207 233 Craft Control Classroom 486

207 234 Mech. Maint. Classroom 486

207 235 LCAC Op Classroom 486

207 148 ABCTT Classroom 648

ATTACHMENT (1)

NAVAL GUNFIRE SUPPORT MOBILE TEAM TRAINER

DEVICE 20E19, SERIAL NUMBER’S 1, 2, 7

1.0 DESCRIPTION. Device 20E19 is a portable computerized device utilizing a rugged portable computer. The device provides shipboard personnel training in the direction of naval gunfire and gunfire support coordination with air and artillery units. Training is conducted on-board and uses the ship’s various tactical control consoles while in port.

1.1 COMPUTER SYSTEM. The computer system is a Pentium-based with 512 Mb RAM and runs

Windows XP operating system. This portable computer has interface circuit cards to read the synchro gun orders from the GCS’s MK 20 SDC/GMP or from the GFCS’s Unit 6 Signal Data Translator and send Naval Tactical Data Standard (NTDS) Type E/A navigation data to the MK 20 SDC/GMP or to the

AN/UYK-7 or AN/UYK-43 computers to simulate NAVSSI GPS data. The monitor and keyboard are self-contained.

2.0 LOCATION.

BUILDING COMMAND FLOOR/ROOM SQ. FT.

15 EWTGPAC 201 (Training Area)

3.0 NORMAL OPERATING HOURS AND TASK NUMBER

NORMAL TRAINING HOURS & TASK NUMBER

TRAINING SYSTEM & EQUIPMENT

(TS/E): 20E19

SERIAL #: 1, 2, 7

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

01A N/A N/A N/A N/A N/A N/A N/A

02A N/A N/A N/A N/A N/A N/A N/A

03A N/A N/A N/A N/A N/A N/A N/A

NOTE: Operational Hours per Day (OHPD)

4.0 SUBSYSTEMS AND ASSEMBLIES REQUIRING CONTRACTOR MAINTENANCE,

BUT NOT SUPPLY SUPPORT. N/A

DEVICE 20E19, SERIAL NUMBER’S 1, 2, 7

5.0 MAJOR HARDWARE LIST.

NOMENCLATURE QUANTITY

NAVAL GUNFIRE SUPPORT MOBILE TEAM TRAINER D20E19

COMPUTER 6 (comprised of the following:)

Rugged Portable Computer (Dolch FlexPac 6) 1

S/D Converter Cards, PCI (DDC SB-36213IX-361) 1

NTDS Type E PCI Cards (Sabtech SW-04101-00) 1

SYNCHRO BOX 6 (comprised of the following:)

Synchro Connection Box (Hammond 1414PHL6) 1

Terminal Boards, 12 contacts (Newark 14F2320) 3

Stuffing Tube (M19622/1-002) 1

Packing Assy (MS16178-2 1

O-Ring (MS28775-214) 1

Synchro Connector Jack (M3402D40-62P) 1

PC Synchro Cable, Synchro-1 (Belden 9813) 15 FT

PC Synchro Connectors w/backshells (HBW51-68K32211) 1

SYNCHRO-3, -3A CABLE 6 (comprised of the following:)

Synchro Cable (3XSOW-14) 15 FT

Synchro Cable Connectors (MS3406D40-62S) 2

Synchro Cable Connector Backshells (M85049/10-83W) 2

Synchro Reference Cable (DXW-4) 3 FT

Synchro Ref Cable Connector (MS3406D14S-7PY) 1

Synchro Ref Cable Connector Backshell (M85049/11-116W) 1

LLS-1 CABLE 6 (comprised of the following:)

LLS Cable (Belden 9222) 20 FT

NTDS Type E Large Connector (PL80-7) 1

NTDS Type E Small Connector (PL74-7) 1

CASE 6 (comprised of the following:)

Stowage Case (Pelican 1660) 1

6.0 SPECIAL REQUIREMENTS. Due to its mobile characteristics, this trainer is normally used on deployment exercises an average of 36 times per year. Contractor shall have three (3) working days from the time notified by the COR to respond and perform Corrective Maintenance on this trainer. Upon notification by the COR of an impending deployment, the Contractor shall have three (3) calendar days to respond and perform a pre-operational readiness checkout to ensure trainer is in Fully Operational

Condition (FOC). While trainer is in port, and with close coordination with the COR, the Contractor shall be responsible for executing the Planned Maintenance in accordance with the MRCs, PMS, and site specific local procedures. This trainer is exempt from Daily Operational Readiness Tests (DORTs).

DEVICE 20E19, SERIAL NUMBER’S 1, 2, 7

The training equipment will be under the custody of the Marines in Building 401. Marine personnel will transport training equipment to COR for turn-in to COMS for maintenance purposes.

This training equipment is exempt from being regularly scheduled for use because of its deployment uses.

7.0 LINES OF DEMARCATION.

7.1 ELECTRICAL. Contractor maintenance responsibility commences at the power cord for each individual component of the training system, and includes items identified in paragraph 5.0 of this

Attachment, and all equipment, components, interconnecting cabling, and target mounting hardware.

8.0 EQUIPMENT CAPABILITY MATRIX (ECM). ECM’S DO NOT APPLY TO

EQUIPMENT UNDER OCCM. Contractor’s Performance will be measured as follows:

Contractor’s failure to respond, perform corrective maintenance, and restore the 20E19 to a FOC within 3-working days of notification by the COR will result in a 30% straight deduction against the devices monthly cost minus supply support for failure to respond.

NOTE: In the event the Government determines the training system or equipment is not in a Fully

Operational Condition (FOC) for the planned objective of the scheduled use, the training system or equipment will be considered hard down and not available for the GSU, resulting in 100 % degradation.

ATTACHMENT (2)

LANDING CRAFT AIR CUSHION FULL MISSION TRAINER (LCAC FMT)

DEVICE 20G6, SERIAL NUMBER 1

1.0 DESCRIPTION. The Landing Craft Air Cushion - Full Mission Trainer (LCAC-FMT), 20G6, is a fully operational LCAC underway control and systems device. It includes a trainee station with operator, engineer, navigator, and group commander positions, a visual system, motion system, instructor station, a computer complex, and power distribution. The device simulates not only the response of the

LCAC overland and over water characteristics and craft systems, but the visual, aural, and environmental sensations as well. It also provides features in the motion system that responds to simulated environmental conditions and control inputs. Visual databases are provided for four (4) separate areas.

The visual scenes represent Open Ocean, surf, harbor areas, beaches, overland offload sites, ramp and apron areas, surrounding terrain and cultural features, support ships, and civilian and military craft and targets. The scenes are valid from engine start through lift-off, hover, departure from land to water, approach and landing to support ship, launch and departure from support ship, and landing from water to land. Aural effects such as engine noise and rotating machinery are simulated. LCAC-FMT consist of the following:

1.1 TRAINEE STATION. Trainee performance is monitored and recorded by the device for post-exercise evaluation.

1.2 INSTRUCTOR OPERATOR STATION (IOS). The IOS features include the capability to operate in run mode in which training is under the direct control of an instructor at the Instructor Operator

Stations (IOS). At their discretion, simulator malfunctions can be inserted or removed and meteorological effects can be tailored to suit a variety of training requirements. The capability for ownership record and playback as target LCAC is provided. Parameter record is available, along with hard copy printout of IOS flat screen monitor displays.

1.3 COMPUTER SYSTEM. The device consists of the Motion Cabinet (Unit 3), System Electrical

Bypass (Unit 11), Visual Image Generator Rack (Unit 20), Host Computer/IOS Rack (Unit 10), Host

Printer (Unit 29), System Rack #1 (Unit 30), System Rack #2 (Unit 31), AC Power Distribution Unit

(Unit 33), Emergency Off Bus (Unit 54), Motion Power Transformer (Unit 55), Host Ethernet Switch

(Unit 56), and 4- Port KVM Switch (Unit 58).

1.4 VISUAL SYSTEM. The major components of the Visual System are three (3) Digital Projection dVision 35 WQXGA LED projectors; with three (3) DP optical blend plate system per projector and auto-alignment/projector control laptop, one (1) Mission Function computer and four (4) Visual Image

Generators (IGs), and a Visual Display. These components together produce real-time out-of-window scenes of colored surfaces and lights representing the visual environment. The Visual System responds to

LCAC simulator data defining viewing conditions and provides video signals to the image display to present corresponding updated images to the crew trainees. The system provides a continuous, full color, collimated image, including complete cross-cabin views, to the LCAC crew.

1.4.1 The visual system provides scenes that support training in overwater operations, visual launch and departure from land and ship, and open water operations in various light conditions (pre-dawn, dawn, day, dusk, and night) for both clear and degraded visibility. Hardware-implemented animation techniques provide realistic visual wave motion. The image display is produced by three (3) projectors and off-axis collimation optics consisting of a rear projection screen and a mirror to produce a virtual image at infinity.

1.4.2 The visual display consists of projector units, edge blend units, collimating mirror, sensor unit, mirror pump, vacuum valve assembly, mirror power supply unit, remote control unit, and back projection

DEVICE 20G6, SERIAL NUMBER 1

screen. The components that are of particular interest to the instructor are described in the following paragraphs.

1.4.3 The visual projectors are three identical projector units mounted above the Student Station on adjustable pan-and-tilt mechanisms; fixed mountings.

1.4.4 The Collimating Mirror is a thin elastic membrane of aluminized polyester stretched over an air tight box and the air within the box partially evacuated the membrane then forms a curved surface closely approximating a sphere. The mirror extends around the front of the simulator fuselage to give an uninterrupted field of view of 170 degrees horizontally and 40 degrees vertically (+15 degrees up, -25 degrees down).

1.4.5 The Back Projection Screen produces a real image from the three projectors and directs the light to the collimating mirror and into the cockpit area.

1.5 MOTION SYSTEM. The Motion System consists of the Moog Next Generation Electric

Motion System, which encompasses the Motion System Supply Scope (Motion Cabinet, Base Joints, Axel Joints, Actuators and Drawbridge). The Motion Base is designed to provide the 6 Degrees of

Freedom (6 DOF), necessary to simulate actual aircraft craft/hovercraft motion. The 6 DOF are longitudinal, lateral, heave, yaw, pitch, and roll. It provides correct correlation of the Trainee Station motion and visual cues.

207 EWTGPAC 116, Simulator Laboratory 2100

207 EWTGPAC 119, Computer/Instructor 1472

207 EWTGPAC 120, Maintenance Laboratory

Office

207 EWTGPAC 121, Storage 324

207 EWTGPAC 150, Instructor Room 272

DEVICE 20G6, SERIAL NUMBER 1

TRAINING SYSTEM & EQUIPMENT

(TS/E): 20G6

SERIAL #: 1

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

04A 16 0530 2130 0700** 1700** 0700** 1700**

04B 20 0530 0130 0700** 1700** 0700** 1700**

04C 12 0530 1730 0700** 1700** 0700** 1700**

NOTE: Operational Hours per Day (OHPD)

**20G6 - Reserve Training - Up to two (2) weekends a month for 20 days a year.

The trainer has an additional 50 hours per year with flexibility to add or change the schedule upon 24 hours advance notice to the COMS Contractor.

Partial weekends may be scheduled.

THE LANDING CRAFT AIR CUSHION – FULL MISSION TRAINER (LCAC-FMT), 20G6

Host Computer 1

Aural ICS System 1

I/O System 1

On-Board Equipment Assembly 1

Trainee Station 1

Access Ramp 1

Visual Display Set 1

Projectors 3

Optical Edge Blend Plates 3

Mission Function Computer 1

Visual Image Generators 4

Hard Copy Laserjet Printer Unit 1

DEVICE 20G6, SERIAL NUMBER 1

RPA Auto-Alignment and Projector Control System 1

Off-Board IOS System 1

AC Power Distribution Unit 1

MOOG Electric Motion System 1

6.0 SPECIAL REQUIREMENTS. N/A

8.0 EQUIPMENT CAPABILITY MATRIX (ECM). The percentages of degradation shown below are the result of each system(s) / subsystem(s) failure or partial failure, and are used in computing the Availability Performance Factor for this training system or equipment for each

Government Schedule Use (GSU):

Readiness Test or Equivalent

*Failure, if configuration cannot be reconfigured for problem areas, 50-100% depending on scenario lost. If trainer for a specific scenario needs constant reboots, the loss shall be considered 100%. Degradations of 50% or more are considered 100% degraded.

NOTE: Additional units, items, or assemblies shall be counted pursuant to local practices. However, the cumulative total of the additional degradations shall not exceed 25%. In the event the Government determines the training system or equipment is not in a Fully Operational Condition (FOC) for the planned objective of the scheduled use, the training system or equipment will be considered hard down and not available for the GSU, resulting in 100 % degradation.

EACH FAILED SYSTEM(S) / SUBSYSTEM(S) PERCENT OF

DEGRADATION

Host Computer 90*

Aural ICS System 10

I/O System 90*

On-Board Equipment Assembly 40

Trainee Station 40

Motion System Equipment 30

Motion Electronics Cabinet 30

Access Ramp 10

Visual Display Set 20

Visual Image Generators 60*

Hard Copy Laserjet Printer Unit 0

RPA Auto-Alignment and Projector Control System 20

Off-Board IOS System 10

AC Power Distribution Unit 90*

MOOG Electric Motion System 10

ATTACHMENT (3)

7/11 M RHIB SIM

SERIAL NUMBER TBD

1.0 DESCRIPTION. This course teaches basic Coxswain Navigation fundamentals and principles.

207 EWTGPAC 213B, Classroom and Full Mock-Up Trainer

(TS/E): 7/11 M RHIB

SERIAL #: TBD

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

06A N/A N/A N/A N/A N/A N/A N/A

FULL MOCK UP TRAINER

Projectors (Optoma TX665UST-3D) 9

Image Generator (Cyberpower Elite 431) 9

Monitor (Samsung 730BF) 1

Speakers (Audix) 2

Camera (Ganz) 1

CONSOLE

CPU (Dell Precision T3500) 1

Monitor (SyncMaster 214T) 1

Keyboard 1

3 Button Track Ball (KMS) 1

USB2 MultiCom CCA (KMS NS2179) 1

VHF Radio (KMS) 1

Throttle Assembly (KMS NS2164) 1

SERIAL NUMBER TBD

USB PanCom CCA (KMS NS2109) 1

Audio Amp (KMS NS2172) 1

Steering System (KMS NS2165) 1

INTERFACE

Twin Bucket Control (KMS NS2164) 1

Helm Wheel Assembly (KMS Multi Turn) 1

Open Mic (EZOG) 1

TI Optoma Projector (L-27231KEY) 9

Remote

SERVER RACK

Image Generator (Cyberpower Elite 431) 9

Surge Protector 1

Network Work Switch (HP ProCurve 2724) 1

Computer Rack Assembly 2

CPU (Dell Precision T3500) 1

Mouse (HP M-UAE96) 1

STUDENT STATIONS 6 (comprised of the following:)

CPU (Dell Precision T3400) 12

Monitor (HP LP2065) 12

Keyboard (Dell) 6

Headset (KOSS SB-40) 6

Joystick (Logitech X3D) 6

Mouse 6

Wheel Assembly (KMS Multi Turn) 6

Student Consoles 6

INSTRUCTOR OPERATOR STATION 1 (comprised of the following:)

CPU (Dell Precision T3500) 1

Monitor (Samsung SynchMaster 740BX) 6

Monitor (HP LP2065) 1

Stereo Mixer (Shore SCM262) 1

VCR Player (GANZ CTR-024N-2) 1

CCTV Monitor (CEM-15A) 1

Keyboard (H KB-0316) 1

Headset (KOSS SB-45) 1

Speakers (Labtec) 2

Modem (US Robotics 56K) 1

Mouse (HP M-UAE96) 1

USB Modem (US Robotics 56K) 1

Surge Protector 1

Instructor Console 1

SERIAL NUMBER TBD

8.0 EQUIPMENT CAPABILITY MATRIX (ECM). ECM’S DO NOT APPLY TO EQUIPMENT

UNDER OCCM. Contractor’s Performance will be measured as follows:

Contractor’s failure to respond, perform corrective maintenance, and restore the 7/11 M RHIB Sim to a FOC within 3-working days of notification by the COR will result in a 30% straight deduction against the devices monthly cost minus supply support for failure to respond.

ATTACHMENT (4)

COMBINED ARMS VIRTUAL ENVIRONMENT (CAVE)

SERIAL NUMBER TBD

1.0 DESCRIPTION. The U.S. Navy Combined Arms Virtual Environment (CAVE) training system provides an immersive, large field of view, partial dome display for individual and team training in the employment of sea and land-based supporting arms and close air support for Joint Terminal Attack

Controllers (JTACs), Joint Fires Observers (JFOs), Forward Air Controllers (FACs), Forward Air

Controllers Airborne (FAC[A]), Forward Observers (FOs), Naval Gunfire Liaison Officers (NGLOs) and the Shore Fire Control Party (SFCP).

The training system will provide a high fidelity environment that will replicate the environmental and tactical conditions of real world operations. The system will replicate a combat environment with enough fidelity and realism to enable trainees to respond to the threats with joint tactics, techniques, and procedures as they would in real world combat operations.

1.1 HARDWARE CONFIGURATION.

1.1.1 MASTER IOS STATION. The Master IOS Station consists of: Semi-Automated Forces

(MACE) Management Computer, Dell UltraSharp U3415W 34-inch curved LED-Lit Monitor, ASUS

VS248H-P 24-inch full HD VGA Back-Lit LED Monitor, PC-Intel Core i7 (6 cores/12 threads) 64-GB

RAM, USB headset, Delcom Foot Switch, Logitech Extreme 3D Pro USB Joystick, 3Dconnexion

SpaceMouse Pro USB 3D Navigation Device, and Logitech USB Gamepad.

1.1.2 ROLE-PLAYER STATION. The Role-Player Station consists of: OTW View (VRSG)/Semi-

Automated Forces (MACE) Computer, Dell UltraSharp U3415W 34-inch Curved LED-Lit Monitor, PC-

Intel Core i7(6 cores/12 threads) 64-GB RAM, Thrustmaster Hotas Warthog Flight Stick, Natural Point

IR Tracker, USB Headset, and Delcom Foot Switch.

1.1.3 SENSOR VIEW STATION. The Sensor View Station consists of: Sensor View Computer, ASUS 19" VE198T LED Display 1440 x 900 (DVI / VGA), and PC-Intel Core i7(6 cores/12 threads) 64-

GB RAM.

1.1.4 STUDENT STATION. The Student Station consists of : Visual Computers (3x Projectors, Sony VPL-GTZ280 4k SXRD Laser Light Source Projector), EME (PLDR) and Computer, EME

(Vector-21) and Computer, EME (IZLID II) no dedicated computer (Note: Connects to any VRSG channel with a single USB cable; it does not communicate on any network) , Sound System, PC-Intel

Core i7(6 cores/12 threads) 64-GB RAM (Projectors/EME), ASUS VT207N Touch Monitor – 19.5”

(1600x900) 10-point touch (Student Comm Suite), Core i3 Processors w/16GB RAM and 750GB SATA

HDD (Student Comm Suite), and SimRadios Interface for Combat Headsets.

1.1.5 SECOND IOS STATION. The second IOS station consists of: ASUS VT207N Touch Monitor

- 19.5" (1600x900) 10-point touch, Core i3 Processors w/16GB RAM and 750GB SATA HDD, USB

Headset, and Delcom Foot Switch.

1.1.6 SUPPORT ARMS DEVICE. The Support Arms Device consists of: OTW View

(VRSG)/Semi-Automated Forces (MACE) Computer, Dell UltraSharp U3415W 34-inch Curved LED-Lit

Monitor, PC-Intel Core i7 (6 cores/12 threads) 64GB RAM, Thrustmaster Hotas Warthog Flight Stick, Logitech Extreme 3D Pro USB Joystick, Logitech USB Gamepad, Natural Point IR Tracker, USB

Headset, Delcom Foot Switch, and Sound System.

SERIAL NUMBER TBD

1.1.7 TERRAIN SERVER. The Terrain Server consists of: PC-Intel Core i7 (6 cores/12 threads)

64GB RAM and (8X) Seagate Enterprise 6TB 128MB 7200RPM SATA-600 Hard Drive - RAID 6 -

~31TB Capacity.

1.1.8 1GB NETWORK. The 1GB Network (DIS Traffic) consists of: (1X) Netgear ProSafe 24-Port

10/100/1000 1U Rackmount Smart Switch.

1.1.9 10GB NETWORK. The 10GB Network (Terrain Traffic) consists of: (2X) Netgear ProSafe

XS708E 8-Port 10-GB 1U Rackmount Smart Switch (14-Ports Useable).

1.2 SOFTWARE CONFIGURATION.

1.2.1 MASTER IOS STATION. The Master IOS Station consists of: Adobe Acrobat Reader DC

V15.017.20053, JAVA V8 Update 101 Build 1.8.0_101-b13, TightVNC 64-Bit V2.7.10, Scooter

Software Beyond Compare V4.1.6 Build 21095, MACE version 1.2.x, NET Framework 4.5.1, Direct X, SlimDX Runtime .NET 4.0 x64 (January 2012), SlimDX Runtime .NET 4.0 x86 (January 2012), DIScord version 1.x, Viper DIS Radio version 15.64, VLC Media Player, Logitech Driver, 3DConnexion, Delcom

Driver.

1.2.2 ROLE-PLAYER STATION. The Role-Player Station consists of: Adobe Acrobat Reader DC

Software Beyond Compare V4.1.6 Build 21095, MACE version 1.2.x, NET Framework 4.5.1, Direct X, SlimDX Runtime .NET 4.0 x64 (January 2012), SlimDX Runtime .NET 4.0 x86 (January 2012), Viper

DIS Radio version 15.64, VRSG (Virtual Reality Scene Generator) 5.11.x, VRSG Scenario Editor, SafeNet 7.41, VS 2013 redist 64, VS 2015 redist 32, VS 2015 redist 64, 3DConnexion, VLC Media

Player, Thrustmaster Driver, Logitech Driver, Delcom Driver, Natural Point IR Tracker Driver.

1.2.3 SENSOR VIEW STATION. The Sensor View Station consists of: Adobe Acrobat Reader DC

Software Beyond Compare V4.1.6 Build 21095 (30-Day TRIAL), Viper DIS Radio version 15.64, NET

Framework 4.5.1, Direct X, SlimDX Runtime .NET 4.0 x64 (January 2012), SlimDX Runtime .NET 4.0 x86 (January 2012), VRSG (Virtual Reality Scene Generator), VRSG Scenario Editor, SafeNet 7.41, VS

2013 redist 64, VS 2015 redist 32, VS 2015 redist 64, 3DConnexion, VLC Media Player, Delcom Driver.

1.2.4 STUDENT STATION. The Student Station consists of: Projector Computers/EME

(PLDR)/EME (Vector-21), Student Comm/DAGR/ROVER Computer, Combat Headset, and Projector

Computers/EME (PLDR)/EME (Vector-21). The Projector Computers/EME (PLDR)/EME (Vector-21) consists of: Adobe Acrobat Reader DC V15.017.20053, JAVA V8 Update 101 Build 1.8.0_101-b13, TightVNC 64-Bit V2.7.10, Scooter Software Beyond Compare V4.1.6 Build 21095, NET Framework

4.5.1, Direct X, SlimDX Runtime .NET 4.0 x64 (January 2012), SlimDX Runtime .NET 4.0 x86 (January

2012), VRSG (Virtual Reality Scene Generator) 5.11.x, VRSG Scenario Editor, SafeNet 7.41, VS 2013 redist 64, VS 2015 redist 32, VS 2015 redist 64, 3DConnexion, and VLC Media Player. The Student

Comm/DAGR/ROVER Computer consists of: .NET Framework 4.5.1, Direct X, SlimDX Runtime .NET

4.0 x64 (January 2012), SlimDX Runtime .NET 4.0 x86 (January 2012), Viper DIS Radio version 15.64, VLC Media Player, C-EAGR Software_x64, Logitech Driver, and Delcom Driver. The Combat Headset consists of: SimRadios SimPPT Driver. The Projector Computers/EME (PLDR)/EME (Vector-21) consists of: linux-kernel, alsa-lib, busybox, crypto, directfb, dosfstools, e2fsprogs, exceptionmonitor, fuse, gdisk, glib, glibc, iptables, libmicrohttpd, libnuma (in numactl), procps, pump-autoip, and XZ utils.

SERIAL NUMBER TBD

1.2.5 SECOND IOS STATION. The Second IOS Station consists of: NET Framework 4.5.1, Direct

X, SlimDX Runtime .NET 4.0 x64 (January 2012), SlimDX Runtime .NET 4.0 x86 (January 2012), Viper

DIS Radio version 15.64, VLC Media Player, C-EAGR Software_x64, Logitech Driver, and Delcom

Driver.

1.2.6 SUPPORT ARMS TRAINER. The Support Arms Trainer consists of: Adobe Acrobat Reader

DC V15.017.20053, JAVA V8 Update 101 Build 1.8.0_101-b13, TightVNC 64-Bit V2.7.10, Scooter

Software Beyond Compare V4.1.6 Build 21095, MACE version 1.2.x, NET Framework 4.5.1, Direct X, SlimDX Runtime .NET 4.0 x64 (January 2012), SlimDX Runtime .NET 4.0 x86 (January 2012), Viper

DIS Radio version 1.x, VRSG (Virtual Reality Scene Generator) 5.11.x, VRSG Scenario Editor, SafeNet

7.41, VS 2013 redist 64, VS 2015 redist 32, VS 2015 redist 64, 3DConnexion, VLC Media Player, Thrustmaster Driver, Logitech Driver, Delcom Driver, and Natural Point IR Tracker Driver.

1.2.7 TERRAIN SERVER. The Terrain Server consists of: ASUS SABERTOOTH X99 - Bios

Version# 3301 / Chipset Driver V10.1.2.8 WHQL / MEI Driver V11.0.5.1189 or Latest, NVIDIA

Reference Graphics Driver Version# 372.54 or Latest, ASMEDIA USB 3 Driver V1.16.35.1 or Latest -

From ASUS Motherboard Driver Site, INTEL SAS Hardware Raid Driver For Windows Version#

6.710.11.00 or Latest, INTEL Raid Web Console 2 Utility for Windows Version# 15.11.00.13 or Latest, REALTEK Audio Drive V6.0.1.7848 or Latest - From ASUS Motherboard Driver Site, REALTEK LAN

Driver V10.1.505.2015 / INTEL LAN Driver V20.1.2019.0 or Latest - From ASUS Motherboard Driver

Site, INTEL Network Driver for Windows 10 Version# 21.0 or Latest, Microsoft Windows Server 2012

R2 STD Version# 6.3.9600 Build 9600 + All Windows Updates and Client Access Licenses, and ESRI

ArcGIS 10.2.2 + 3D Analyst Extension (pre-req for VRSG Terrain Tools). The Open Street Map Virtual

Server consists of: Red Hat Enterprise Linux (RHEL) Server v7, Open Street Maps (open-source) map data, Tirex (open-source software) map tile generator, PostgreSQL (open-source software) database for

OSM data, and Oracle Virtual Box v5 free virtualization software to run RHEL on Windows.

401 EWTGPAC 168, CAVE Briefing Room

401 EWTGPAC 168, CAVE Dome Room

401 EWTGPAC 168, CAVE IG Room

SERIAL NUMBER TBD

(TS/E): CAVE

SERIAL #: TBD

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

07A N/A 0700 1800 N/A N/A N/A N/A

MASTER IOS STATION

Computer Intel i7 1

Monitor 3

PTT Microphone/Headset 1

Joystick for Sensor Control 1

3D Mouse 1

ROLE-PLAYER STATION

Computer Intel i7 1

Monitor 2

PTT Microphone/Headset 1

Joystick for Flight Control 1

IR Head Tracker 1

SENSOR VIEW STATION

Computer Intel i7 1

Monitor 1

PTT Microphone/Headset 1

STUDENT STATION

Computer Intel i3 2

SERIAL NUMBER TBD

6.0 SPECIAL REQUIREMENTS. Under this OCCM concept, the Contractor shall have two (2) hours to respond and three (3) working days to complete all necessary actions to restore the device to a

Fully Operational Capability (FOC), once the COR has provided any necessary parts / software.

6.1 GOVERNMENT FURNISHED EQUIPMENT (GFE). The Contractor shall inform the COR of all hardware failures and action taken. A Cost CLIN will be established to allow the Contractor to bill for other direct costs (shipping and materials) in the execution of warranted replacement parts /equipment.

The spares for the CAVE are listed below for informational purposes. The Government will be responsible for storage, inventory and replenishment.

Projectors Computers Intel i7 3

Sony 4K Projectors 3

Emulated Military Equipment (EME) 3

EME Computers Intel i7 2

Sound System 1

SECOND IOS STATION

Computer Intel i3 1

Monitor 1

PTT Microphone/Headset 1

SUPPORT ARMS TRAINER STATION (SAMT)

Computer Intel i7 2

Monitor 3

PTT Microphone/Headset 1

Joystick for Flight control 1

Gamepad 1

Sound System 1

MISCELLANEOUS

Network Switch (1GB) 1

Network Switch (10 GB) 2

Terrain Server 1

EQUIPMENT QUANTITY

Spare Computers 3

Projector Service Contract with Immersive Display Solutions 3

1 GB Network Switch (24-Port) 3

10 GB Network Switch (8-Port) 3

Student Computers 3

Combat Headset Plugin Set 3

Monitors 3

Keyboard/Mouses 3

Thrustmaster Hotas Warthog Flight Stick 1

Loitech Extreme 3D Pro USB Joystick 1

Logitech Gamepad 3

Solid State Drives 4

SERIAL NUMBER TBD

6.2 EMULATED MILITARY EQUIPMENT SPARES OF PHASE I.

*NOTE: There is only one (1) spare for LANT and PAC to be shared; it will be stored at PAC and shipped when required at Government expense.

6.3 EXTRA SPARES PHASE 1 INSTALLATION.

6.4 SOFTWARE MAINTENANCE.

7.0 LINE OF DEMARCATION.

8.0 EQUIPMENT CAPABILITY MATRIX (ECM). ECM’S DO NOT APPLY TO EQUIPMENT

UNDER OCCM. Contractor’s Performance will be measured as follows:

Graphic Card 3

Headsets 6

Gamepads 6

6 DOF 1

Foot Switch 3

EQUIPMENT QUANTITY

IZLID-BE Meyers Body 1

Vector 21-Vectronix Body 1

PLDR-GFE* 1

EQUIPMENT QUANTITY

Spare Student station with small computer/touch monitor 1

50ft High Speed M/M HDMI Cable for Monitors 1

10ft High Speed M/M HDMI Cable 1

Logitech Extreme 3D Pro USB Joystick 1

Logitech USB Headset 2

Logitech Gamepad 1

Delcom foot switch 2

Black USB Keyboard 1

USB Mouse 2

Combat Headset plugin 1

Spare computer in the Server Rack 1

SOFTWARE QUANTITY

BSI-Modern Air Combat Environment – Dome Support 1

BSI-Modern Air Combat Environment 1

MetaVR-Virtual Reality Scene Generator 11

Scalable Display Technologies Software Maintenance 1

SERIAL NUMBER TBD

Contractor’s failure to respond to perform corrective maintenance and restore the CAVE to a FOC within three (3) working days of receipt of hardware/software from the COR will result in a 30% straight deduction against the devices monthly cost minus supply support for failure to respond.

ATTACHMENT (5)

VIRTUAL ENVIRONMENT LCAC (VELCAC)

DEVICE 20G9, SERIAL NUMBER 1

1.0 DESCRIPTION. The Virtual Environment Landing Craft Air Cushion (VELCAC) is a supplemental training device that provides students the ability to familiarize themselves with buttons, screens, and various SEAOPS procedures. The VELCAC is not designed to be a replacement for the full motion trainer (FMT) but to be used as supplemental station for sequencing tasks and procedural remediation. VELCAC consist of the following:

1.1 TRAINEE STATION. The Trainee Station is a mockup of the starboard (STBD) cabin of an

LCAC. A yoke and rudder pedal set, pitch / throttle control is added to the Craftmaster station, and a trackball for the engineering station. Each station has two (2) LCD touchscreens that simulate the interface between the crewmember and the UKB / display screens. One (1) visual display screen displays the simulated sight picture while the craft is in operation. All stations have fully functioning LCAC seat and restraint system.

1.2 INSTRUCTOR OPERATOR STATION (IOS). The station consists of a standard student desk with a COTS PC and a monitor. The station allows the instructor to load the mission into the VELCAC and monitor the students.

1.3 COMPUTER SYSTEM. The system requires four (4) COTS PC computers to simulate the operation of the STBD cabin.

1.4 VISUAL SYSTEM. The trainee station consists of six (6) touch screen LCD displays that replicate UKB and display screens and three (3) visual displays that replicate the student’s sight picture of flying in the craft.

207 EWTGPAC 119, Computer/Instructor Stations 1472

207 EWTGPAC 120, Maintenance Laboratory Office 625

207 EWTGPAC 121, Storage 324

207 EWTGPAC 150, Instructor Room 272

DEVICE 20G9, SERIAL NUMBER 1

(TS/E): 20G9

SERIAL #: 1

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

05A 16.0 0530 2130 0700** 1700** 0700** 1700**

05B 20.0 0530 0130 0700** 1700** 0700** 1700**

05C 12.0 0530 1730 0700** 1700** 0700** 1700**

NOTE: Operational Hours per Day (OHPD)

**20G9- Reserve Training- Up to Two weekends a month for 20 days a year.

The trainer has an additional 50 hours per year with flexibility to add or change the schedule upon 24 hours advance notice to the COMS Contractor.

Partial weekends may be scheduled.

VIRTUAL ENVIRONMENT LANDING CRAFT AIR CUSHION (VELCAC)

Host Computer 4

Mock Up Craftmaster Station 1

Mock Up Engineer Station 1

Mock Up Navigator Station 1

Instructor Operator Station 1

7.1 ELECTRICAL. Contractor maintenance responsibility commences at the power cord for each

DEVICE 20G9, SERIAL NUMBER 1

FAILED SYSTEM(S) OR SUBSYSTEM(S) PERCENT OF

DEGRADATION

Instructor Operator Station 90*

Mock Up Craftmaster Station 33.3

Mock Up Engineer Station 33.3

Mock Up Navigator Station 33.3

ATTACHMENT (6)

LCAC CLASSROOM

DEVICE 20G8F, SERIAL NUMBER’S 233, 234, 235

1.0 DESCRIPTION. The Landing Craft Air Cushion (LCAC) Classrooms are used for the formal delivery of course matter in a classroom setting. The classroom can support PowerPoint presentations, computer based training lectures and testing, and various forms of multimedia.

1.1 TRAINEE STATION. Each classroom can support 12 students with a dedicated commercial-off-the-shelf (COTS) computer and two monitors for every workstation. All workstations are interconnected to and networked through the instructor station. The student stations do not have outside connectivity capability.

1.2 INSTRUCTOR OPERATOR STATION (IOS). The station consists of a podium and a COTS

PC, two monitors, and a dedicated printer.

1.3 VISUAL MEDIA SYSTEM. Each classroom has a media projector to display PowerPoint presentations and other multimedia products.

207 EWTGPAC 233, Craft Control Classroom 486

207 EWTGPAC 234, Mech Maint. Classroom 486

207 EWTGPAC 235, LCAC Op Classroom 486

(TS/E): 20G8F

SERIAL #: 233, 234, 235

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

08A N/A N/A N/A N/A N/A N/A N/A

ATTACHMENT (6)

LCAC CLASSROOM

DEVICE 20G8F, SERIAL NUMBER’S 233, 234, 235

LANDING CRAFT AIR CUSHION (LCAC) CLASSROOMS

LCAC Classrooms 3

IOS STATION 3 (comprised of the following:)

COTS PC 1

Monitors 2

Printer 1

TRAINEE STATION 36 (comprised of the following:)

COTS PC 1

Monitors 2

VISUAL MEDIA SYSTEM 3 (comprised of the following:)

Projector 1

8.0 EQUIPMENT CAPABILITY MATRIX (ECM). The percentages of degradation shown below are the result of each system(s) / subsystem(s) failure or partial failure, and are used in computing the

Availability Performance Factor for this training system or equipment for each Government Schedule Use

(GSU):

EACH FAILED SYSTEM(S) / SUBSYSTEM(S) PERCENT OF

ATTACHMENT (7)

LANDING CRAFT CONTROL TEAM TRAINER

DEVICE 16B14A, SERIAL NUMBER 1

1.0 DESCRIPTION. Device16B14A is a radar target generator unit which generates simulated radar ship or aircraft moving target and landmass. Device16B14A is designed primarily for use as a problem generator for Combat Information Center (CIC) and Helicopter Direction (HDC) training. It provides realistic radar signals representing ships or moving aircraft targets which are displayed by the two (2) AN/SPA-25G radar indicators. Device16B14A consist of the following:

1.1 TRAINEE STATION. There are five (5) types of trainee stations. They include:

a. The Dead Reckoning Table (DRT) station with a Parallel Motion Protractor (PMP) - allows the students to become familiar with the plotting of navigational maps.

b. The AN/SPA-25G radar indicator stations two (2) - teaches students the skills necessary to interpret radar signals representing ships or moving aircraft targets.

c. The communications stations comprised of sound powered phones (amplified by AM-

2210G/NTC phone amplifiers) and ten (10) radio stations - provide a communications net between students and instructors.

d. The vertical plotting board station consisting of two (2) lighted boards - designed to teach students plotting techniques.

e. Ships Self Defense System (SSDS) computer and Large Screen Display.

1.2 INSTRUCTOR OPERATOR STATION (IOS). This station consists of two (2) AN/SPA-25G radar indicators, a radar target generator unit, and a communications station.

3504 EWTGPAC 210, Eqpt/Operation Room 157

3504 EWTGPAC 210, Operation/Plotting Room 228

(TS/E): 16B14A

SERIAL #: 1

WEEKDAY (Monday - Friday) SATURDAY SUNDAY

Task OHPD From: To: From: To: From: To:

09A N/A N/A N/A N/A N/A N/A N/A

DEVICE 16B14A, SERIAL NUMBER 1

BUT NOT SUPPLY SUPPORT. The Contractor shall be responsible for organizational level maintenance and for requisitioning material from the Government through the COR for the following:

Audio Freq AMP (AM-2210G/WTC) 4

Radar Indicator SPA25G (2F584-01-231-2595) 2

Audio Freq AMP (AM-2210G/WTC) 4

Clock (01-150400) 1

Dead Reckoning Table (MARK 6 MOD4) * 2

PMP Arms 4

Radar Indicator SPA25G (2F584-01-231-2595) 2

Status Board (1H6605-866-3257) 2

Target/Landmass Gen/Mon (PCS-200) 1

Marine Radio, Std-Horizon Eclipse (407726) 5

Marine Radio, King-VHF 7200 (063-3014-00) 5

Power Supply, Radio Shack (22-504) 6

Speaker, Radio Shack (21-549A) 10

Uninterruptible Power Supply (UPS) (BackUPSPro 650) 1

SSDS Dell Computer (T3610) 1

Large Screen Display, 42 Inch (Phillips TV) 1

Computer Rack w/Monitor (Rack-111) 1

*NOTE: Non-functioning

DEVICE 16B14A, SERIAL NUMBER 1

FAILED SYSTEM(S) OR SUBSYSTEM(S) PERCENT OF

Audio Freq AMP (AM-2210G/WTC) 20

Clock (01-150400) 20

Input Power Panel 20

PMP Arms 20

Radar Indicator SPA25G (2F584-01-231-2595) 25

Target/Landmass Gen/Mon (PCS-200) 40

Vertical Plotting Boards 5

Radio Stations 20

SSDS Dell Computer (T3610) 40

Large Screen Display, 42 Inch (Phillips TV) 40