N32205-15-R-5000-P0003.doc

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION B - SUPPLIES OR SERVICES AND PRICES

The following have been modified:

SUMMARY OF CHANGES

A. REQUEST FOR SPECIFICATION CLARIFICATION

SPECIFICATION ITEM NO: HULL STRUCTURE – Work Items - 101, 102, 105, 109, 110, 111, and 112.

PARAGRAPH / SECTION NO: __VARIOUS_______

TITLE:_STEEL REPAIRS _

QUESTIONS:

Upon review of the various work items involving steep repairs, it appears there are numerous unknowns and variables to take into account in order to provide a competitive proposal.

1. Is there a general report from which the steel work items are based on?

2. Can MSC provide exact locations on the vessel where work will commence in order to determine what and if any interference will need to be accounted for?

ANSWERS:

1. There is an Ultrasonic Gauging Survey report performed on the USNS MERCY (T-AH 19) during its previous availability in 2015, annotating the following items which were ultrasonically gauged:

a. Three Transvers Belts of Deck, Bottom and Side Shell Plating;

b. Plating and Stiffeners in the Fore Peak and Aft Peak Tanks;

c. Aft Main Deck, Forecastle and 01 Deck Plating;

d. Port/Starboard Wind-and-Water Strakes;

e. Keel and Bottom Shell Plating;

f. Sea Chests;

g. Suspect Areas.

Any interested offerors or its subcontractors must sign the attached Non-Disclosure Form and return it to Melanie Barrett at Melanie.Barrett@navy.mil or to Eddie Nelson at Eddie.Nelson1@navy.mil prior to receiving this report.

Ms. Barrett can also be reached via phone at (757) 443-5962 or (757) 777-6766.

Attached: Non-Disclosure Form

2. Refer to the two (2) CDs provided – one (1) which identifies all work items, in particular the steel replacement specifications; and two (2) which identifies all references for all work items with the exception of WI 101. The references for WI 101 were provided via Amendment P0001 dated, 13 July 2015.

B. REQUEST FOR SPECIFICATION CLARIFICATION

SPECIFICATION ITEM NO.: _302 & 510_________________

PARAGRAPH / SECTION NO:___1.1_________________

TITLE: TURNING GEAR MOTOR OVERHAUL

QUESTION:

It is noted that work items 302 and 510 are titled “TURNING GEAR MOTOR OVERHAUL.” Which of the two (2) work items is correct and should be accomplished, Section 300-Electrical or Section 500-Machinary?

1. Please verify which item is to be accomplished.

ANSWER:

1. The correct Work Item is 302: “TURNING GEAR MOTOR OVERHAUL (VRR15-005)” is to be accomplished.

2. Work Item 510 is a duplicate work item and will be removed from the availability work specifications.

Work Item 510 is hereby cancelled in its entirety due to duplication; Work Item 302 outlines the correct work specifications.

(End of Summary of Changes)