RSV_Questions_and_Answers_2.docx

NAVAL SEA SYSTEMS COMMAND

N00024-17-R-4415

QUESTIONS AND ANSWERS #2

3 November 2016

The following are answers to questions received from potential offerors. The answers provide clarification only and DO NOT constitute an amendment to the solicitation.

15. Q. Work Item 243-11-001 does not specify removal, inspection, repair, installation of new staves, and reinstallation of the Stern Tube and Strut Bearings. Please clarify the work specification regarding these bearings.

A. Work Item 243-11-001 modified via Errata 3 to correct the work item and to add the requirements of removal, inspection, repair, installation of new staves, and reinstallation of the Stern Tube and Strut Bearings.

16. Q. Work Item 243-12-001 does not specify removal, inspection, repair, installation of new staves, and reinstallation of the Stern Tube and Strut Bearings. Please clarify the work specification regarding these bearings.

A. Work Item 243-12-001 modified via Errata 3 to correct the work item and to add the requirements of removal, inspection, repair, installation of new staves, and reinstallation of the Stern Tube and Strut Bearings.

17. Q. The following equipment is not listed in Work Item 442-11-001, paragraph 5.01:

1.3.3 Quantity (One EA), AN/WQC-2(A) Transducer Cable, Circuit R-SBW3675 (R2)

1.3.4 Quantity (One EA), AN/WQC-2(A) Transducer Cable, Circuit R-SBW3676 (R2)

1.3.5 Quantity (2 EA), Connector Backshell, Sunbank Part Number SE7A1005S2.0-4es

1.3.6 Quantity (One EA), Connector Part Number: 10-214514-7K Circuit Number: R-SB-W3675 (R2)

1.3.7 Quantity (One EA), Connector Part Number: 10-214514-7I Circuit Number: R-SB-W3676 (R2)

Is it the Government’s intention to provide this material?

A. Material listed in 1.3.3 through 1.3.7 shall be provided as CFM. The Government will only provide material listed in paragraph 5.

18. Q. Will the Government please provide reference drawings listed in Work Item 644-80-001, paragraph 2.2, 644-8469995 Rev C, Habitability Improvement (DDG 80) Arrangement CPO & Crew Sanitary Spaces Modifications, and paragraph 2.5, 512-8469996 Rev C, Habitability Improvement (DDG 80) Ventilation CPO & Crew Sanitary Spaces Modifications?

A. Drawings shall be provided with release of Amendment 2.

19. Q. Contractor received a copy of the CD/DVD and a list of missing references. Contractor requests that the Government provide the missing references.

A. The missing references for the following Work Items will be distributed with Amendment 2: 150-80-002 (2.5), 262-21-001(2.3), 451-90-001(2.9), 472-90-002(2.8 & 2.16), 482-90-001(2.4 & 2.12), 571-31-001(2.5), 721-31-001(2.2 & 2.9), 992-21-002(2.9).

Errata 3 has been generated to correct references for the following Work Items: 438-90-002(2.13 – 300-8659914 Rev A), 441-11-002(2.6 – TW272-AB-PRO-010), 442-11-001 (2.7- 06-001-0010-000), 512-90-003(2.20 – Deleted), 992-21-002(2.6 – PM 601-005) . Corrected references will be distributed with Amendment 2

Errata 2 deleted Work Item 857-11-001

20. Q. Work item 110-21-001, Paragraph 3.1 states to accomplish the requirements of 2.2. The Reference listed PM 390-430 is only 1 page of 77. In addition, the Contractor received through email on 10/27/16 a file marked PM 390-430, however it too was only page 1 of 77.

A. Enclosures 2 and 3 for PM 390-430 shall be provided with release of Amendment 2.

21. Q. The files that are loaded on the FBO are confusing as they are listed as Amendments. Please confirm the actual number of Amendments at this time and if there are additional Amendments, contracts requests copies.

A. The attachments were unintentionally added as separate amendments on FBO, but there has only been one solicitation amendment (0001) issued. On FBO, amendments 2 - 5, as well as RSV Q&A, are all in support of solicitation amendment 0001.

22. Q. Work Item 456-90-002, Reference 2.17 as identified in the specification, does not properly identify the reference and does not appear to be in the GFI provided. Will the Government please provide the correct drawing number for reference 2.17?

A. Ref 2.17 has been corrected via Errata 4. The correct title is “PM 390-433, DDG BF Critical Path Equipment/Cable Turnover, Power-up and Test Requirement Schedule for DDG80 FY 17 DMP”. Updated reference will be distributed with Amendment 2.

23. Q. Work Item 411-90-001, LAR 78511/DDG80-1161998 in Reference 2.33 was not provided in the emails received on 10/27/16. Please provide this LAR A. Reference LAR 78511/DDG80-1161998 was distributed in email 2 of 5 accompanying Amendment 1. If offerors did not receive this attachment, notify Stephanie Jabaley at Stephanie.jabaley@navy.mil for redistribution.

24. Q. Work Item 411-90-001, Para 5.3 shows Kitted Material is shown on the 4720. The 4720 for this alt states the following.

NO DRAWINGS FOUND FOR DDG 80 ALT SA 86462 00

SPAWAR Catherine McKenzie (619) 524-7723

Please provide a list of GFM for this item or delete para 5.3

A. Updated 4720/3 will be distributed with Amendment 2.

25. Q. Several references within Work Item 456-90-003 were not provided on the CD or a follow up email that added some RLAR’s and LAR’s. Please provide the following: 78512/DDG80/1159624 ; 78512/DDG80/1155570 ; 78512/DDG/80/1158818 ; 78512/DDG80/1160562 ; 78512/DDG80/1161018

A. Requested references will be distributed with Amendment 2

26. Q. Errata 1 added Reference 2.22 RLAR 78512/DDG80/1162399 to Work Item 456-90-003. This reference was not provided. Please provide this RLAR.

A. Reference LAR 78512/DDG80/1162399 was sent out in email 2 of 5 accompanying Amendment 1. If offerors did not receive this attachment, notify Stephanie Jabaley at Stephanie.jabaley@navy.mil for redistribution.

27. Q. Several Drawings, LARs and RLARs are missing from work item 474-90-001. We did receive some RLAR and LARs via email on 10/27/16, however the majority of the references are missing from this package. Please provide the following: Ref. 2.2 thru 2.8, 2.16 thru 2.20, 2.25 thru 2.52. This item cannot be priced without this information.

A. References were provided with Amendment 1 via email. The reference numbers corresponding with the file titles are listed as follows:

2.2 100-8659844 Rev A, ShipAlt DDG51-84468K, Launching System Decoy, Mk59 Modification 0, Structural and HO Modifications and Material List

2.3 505-8659847 Rev A, ShipAlt DDG51-84468K, Launching System Decoy, Mk59 Modification 0, Piping Modifications and Material List

2.4 300-8659845 Rev A, ShipAlt DDG51-84468K, Launching System Decoy, Mk59 Modification 0, Consolidated Electrical Modifications and Material List

2.5 300-8659846 Rev A, ShipAlt DDG51-84468K, Launching System Decoy, Mk59 Modification 0, Wire Connection List

2.6 LAR 84468/DDG89/1156222, Missing Reference 31

2.7 LAR 84468/DDG89/1156352, DDG89 Modification of Swaging Sleeve for Guide Line

2.8 LAR 84468/DDG89/1156975, DDG89 The Location of Existing Grab Bar & Staple For Jacob's Ladder (STBD-Side)

2.16 LAR 84468/DDG89/1159524, Modify Deflector Disc to Suit Safety Net Interference

2.17 LAR 84468/DDG89/1159578, Revise STBD Deck Drain Design

2.18 LAR 84468/DDG89/1159830, STFG Tube Location for LCHR No. 1, 3, 6, & 8

2.19 LAR 84468/DDG89/1159926, Revise Launcher Foundation Ground Strap Threaded Pads

2.20 LAR 84468/DDG89/1160002, Revise Deck Drain Type

2.25 RLAR 84468/DDG56/1150840, Modify HELO Safety Nets Test Notes

2.26 RLAR 84468/DDG56/1153235, Modify Test Note Pertaining to FLT Deck Net Frame Testing

2.27 RLAR 84468/DDG67/1151090, Fabrication Dimensions of Platforms Clarified and Revised DDG 85 & 89 ASSY No. A006 to A015

2.28 RLAR 84468/DDG67/1151310, RF Shielding is Missing CRES Washers, Which Distribute the Load From the Bolt Head

2.29 RLAR 84468/DDG67/1151913, Add Mach Details to Launcher FDN Top

2.30 RLAR 84468/DDG67/1154217, Revise WCL for Master Control Panel Power Supply Feed Cable

2.31 RLAR 84468/DDG69/1151855, Quantity of Corrosion Preventative Needs to be Specified on the DWG

2.32 RLAR 84468/DDG69/1152196, Shackle (5/8 IN) and Snap Hook (5/8 IN) Are Oversized for the Application

2.33 RLAR 84468/DDG69/1152197, QTY of Corrosion Preventative Needs To Be on the Drawing

2.34 RLAR 84468/DDG69/1152394, Modify Cable Connector to 90 Degree for Easier Cable Installation

2.35 RLAR 84468/DDG69/1152976, Blast Shield Add 2-Inch DIA Drain Hole Elongated 3-Inches

2.36 RLAR 84468/DDG69/1152990, Replace HELO DK Bumpers Item 335 with New Deflector Disc Assembly

2.37 RLAR 84468/DDG69/1152991, Add Weld Details for Stanchions and Rails

2.38 RLAR 84468/DDG69/1153275, Interferences with PORT and STBD Bail Brackets

2.39 RLAR 84468/DDG69/1153916, Cable Between Unit A [PWR DIST Box (1- 145-2)] & Unit B (Power Supply) Has Incorrect Hook Up Shown for the Power Supply Connection

2.40 RLAR 84468/DDG69/1154198, Add Cable Penetration on Each Blast Shield

2.41 RLAR 84468/DDG69/1154299, Fill and Drain No Longer REQ'D

2.42 RLAR 84468/DDG69/1154410, Revise HELO Net Deflector Disc Assembly Staple Location

2.43 RLAR 84468/DDG69/1154417, Revise MLCP Connectors in WCL

2.44 RLAR 84468/DDG69/1154594, Add Pressure Relief Holes Warning

2.45 RLAR 84468/DDG69/1155140, Revise Conduit & Fittings to Launcher Horns

2.46 RLAR 84468/DDG89/1153039, Stanchions are in Close Proximity of Each Other

2.47 RLAR 84468/DDG89/1153040, Add Stanchion Mod Details

2.48 RLAR 84468/DDG89/1154203, Decoy Launcher Foundations Revised Details

2.49 RLAR 84468/DDG89/1154452, Add Additional Deck Drains to MK 59 Launcher Platforms

2.50 RLAR 84468/DDG89/1155146, Revise M0112 Conduit Fitting

2.51 RLAR 84468/DDG89/1155267, New TDP and ISEA Feedback Require SID to be Updated to Reflect CHG

2.52 RLAR 84468/DDG89/1156960, Add Deck Pads for Foundation Legs

28. Q. Work Item 482-90-001, Para 5.3 shows Kitted Material is shown on the 4720. The 4720 for this alt states the following:

NO DRAWINGS FOUND FOR DDG 80 ALT SA 81961 00

NAVAIR PMA 280 Wayne Boyce (805) 228-8256

Please provide a list of GFM for this item or delete para 5.3

A. 4720/3 for SA 81961 will be distributed with Amendment 2. The 4720-DDG80-FY17, Ship Alteration Material Summary (4720/3) will be updated and distributed with Amendment 2.

29. Q. Work Item 482-90-00, reference 2.4 8605556 was not provided with this package. Please provide this reference.

A. Requested references will be distributed with Amendment 2

30. Q. Work Item 482-90-001, Para 5.3 indicates the 4720 lists what is being provided as GFM. This shipalt doesn’t exist on the 4720. Please provide a list of GFM for this item.

A. 4720/3 for SA 81961 will be distributed with Amendment 2. The 4720-DDG80-FY17, Ship Alteration Material Summary (4720/3) will be updated and distributed with Amendment 2.

31. Q. Work Item 482-90-002, Reference 2.12 and 2.15 were not provided with this package. Please provide these drawings.

A. References were provided with Amendment 1 via email. The reference numbers corresponding with the file titles are listed as follows:

2.12 600-8696899 Rev A, SHIPALT DDG-51-86881 CIWS SEARAM UPGRADE Equipment Stowage and Material List

2.15 7C521C102, Washdown Countermeasures System Operational Demonstration

32. Q. Work Item 495-90-002 Para 5.3 shows Kitted Material is shown on the 4720. The 4720 for this alt states the following:

DDG 80 ALT SA 81798 00 COVERED UNDER SA 88045 00

SPAWAR PMW 160 Michael Davis (619) 524-2425

Please provide a list of GFM for this item or delete para 5.3

A. Requested references will be distributed with Amendment 2.

33. Q. Work Item 495-90-002, Para 3.1.3 states to procure and turn over to the AIT a list of material on reference 2.3. Reference 2.3 is the Cnsld Vent and Piping Mod. The pieces listed in 3.1.3 do not match anything in the 2.3 reference, except item 111, which is 3 SF of Sheetmetal. Please indicate what the Government wants the contractor to procure.

A. Correction to para 3.1.3 of Work Item 495-90-002 incorporated via Errata 4, Contractor to procure listed item numbers of ref 2.2 vice 2.3.

3.1.3 Procure and turn over to the AIT via the SUPERVISOR, Item Numbers; 111, 112, 154, 155, 157-160, 171-175, 178, 181, 182, 231-234, 249, 250, 252, 255-260, 261, 263-269, 280, 281, 285, 306-312, 327-329, 341, 342, 379, 392-394, 446, 481, 494-496 of 2.2.