MALF-910 (Draft).pdf

-1 /2

'4 -1 /2

1' 2"

8' -1 /2

2' 1- 1/

2' 4"

A

A

B

C C

4-3/8"

8"

7/16"

SECTION A-A

SCALE 1 : 8

6" 8"

3-1/2"

DETAIL B

SCALE 1 : 12

4-3/8"

SECTION C-C

SCALE 1 : 12

NOTE:

UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE Å

APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"

MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE Å MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND

TEST RESULTS.

ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"Å ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING Å MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD Å

TESTING:

100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDSÅ

100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDSÅ

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

SEE NOTES

SIZE

B

PART NUMBER: REV

UNLESS OTHERWISE SPECIFIED

SHEET 1 OF 3

MALF-910

DO NOT SCALE

HORIZONTAL SUPPORT, WELDMENTG2 ENGINEERING

CONSULTING

FINISH

SEE NOTES

CREATED:

Marc.Dickinson

11/19/2022

A A

B B

C C

D D

DRAFT

NOTE:

UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE Å

APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"

MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE Å MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND

TEST RESULTS.

ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"Å ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING Å MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD Å

TESTING:

100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDSÅ

100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDSÅ

ITEM

NO. PART NUMBER QTY. DESCRIPTION

1 MALF-910-01 6 Horizontal Support V5.01

2 MALF-910-02 2 Horizontal Support V5.03

3 MALF-910-03 1 Horizontal Support V5.04

4 MALF-910-04 5 Horizontal Support V5.07

5 MALF-910-05 2 Horizontal Support V5.10

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

SEE NOTES

SIZE

B

PART NUMBER: REV

UNLESS OTHERWISE SPECIFIED

SHEET 2 OF 3

MALF-910

DO NOT SCALE

HORIZONTAL SUPPORT, WELDMENTG2 ENGINEERING

CONSULTING

FINISH

SEE NOTES

CREATED:

Marc.Dickinson

11/19/2022

A A

B B

C C

D D

3-9/16"

2-9/16"

1"

1"

1"

MALF-910-01

3/8"

214.98 8.464

0.82 .032

2.09 .082

39.49 1.555

91.72 3.611

123.26 4.853

121.95 R4.801

MALF-910-02

3/8"

MALF-910-03

22'4"

21'0" 8" 8"

4"

7/16"

7/16"

3-1/8"

4"

4"

3/8"

8" 6"

1"

1"

3-1/2" 3/4" 3/4"

5"

4X 1/2" X 45Á

19.84 .781

MALF-910-04 3/8"

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

SEE NOTES

SIZE

B

PART NUMBER: REV

UNLESS OTHERWISE SPECIFIED

SHEET 3 OF 3

MALF-910

DO NOT SCALE

HORIZONTAL SUPPORT, WELDMENTG2 ENGINEERING

CONSULTING

FINISH

SEE NOTES

CREATED:

Marc.Dickinson

11/19/2022

A A

B B

C C

D D