MALF-906 (Draft).pdf
PDF 623 KB Posted
- Solicitation number
- W912EQ25SS0010
About this file
This document is a draft technical drawing for a Lifting Clevis Weldment (part number MALF-906), specifically designed for articulated concrete mattress (ACM) lifting frames. The technical drawing provides detailed schematics and specifications for a complex geometric component with multiple angular protrusions and precise dimensional measurements. The drawing includes orthographic projections, isometric views, and top-down perspectives of the component, with annotations indicating tolerances, material specifications, and welding requirements.
The technical specifications emphasize rigorous material and welding standards, including requirements that all materials have ABS material certification, be furnished with certificates from mill or material manufacturers, and comply with the latest edition of AWS structural welding code for steel. Critical welding specifications mandate non-destructive testing methods such as volumetric radiographic testing, ultrasonic testing, surface end techniques, and magnetic particle inspection. The document appears to be a technical specification for a specialized lifting frame component intended for use in revetment mat loading operations, consistent with the associated federal contract opportunity for the U.S. Army Corps of Engineers Memphis District.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| REQUEST FOR INFORMATION (RFI) - ACM LIFTING FRAMES.pdf | ||
| MALF-903-A_B (Draft).pdf | ||
| MALF-100-101-102-103 (Draft).pdf | ||
| MALF (Draft).pdf | ||
| MALF-912 (Draft).pdf | ||
| MALF-606 (Draft).pdf | ||
| MALF-907 (Draft).pdf | ||
| MALF-603 (Draft).pdf | ||
| MALF-601 (Draft).pdf | ||
| MALF-902 (Draft).pdf | ||
| MALF-910 (Draft).pdf | ||
| MALF-901-A_B (Draft).PDF | ||
| MALF-911 (Draft).pdf | ||
| MALF-600 (Draft).pdf | ||
| MALF-908 (Draft).pdf | ||
| MALF-604 (Draft).pdf | ||
| MALF-602 (Draft).pdf | ||
| MALF-105 (Draft).pdf | ||
| MALF-104 (Draft).pdf | ||
| MALF-909 (Draft).pdf | ||
| MALF-605 (Draft).pdf |
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2-1/4" 3-3/4" 3-3/4" 2-1/4"
6"
7-1/4"
NOTE:
UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE Å
APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"
MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE Å MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND
TEST RESULTS.
ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"Å ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING Å MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD Å
TESTING:
100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDSÅ
100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDSÅ
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
SEE NOTES
PART NUMBER: REV
SHEET 1 OF 3
MALF-906
DO NOT SCALE
LIFTING CLEVIS, WELDMENT
ggoldman
FINISH
SEE NOTES
CREATED: 11/19/2022
SIZE
AUNLESS OTHERWISE SPECIFIED
G2 ENGINEERING
CONSULTING
A A
B B
C C
D D
DRAFT
NOTE:
UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE Å
APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"
MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE Å MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND
TEST RESULTS.
ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"Å ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING Å MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD Å
TESTING:
100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDSÅ
100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDSÅ
ITEM
NO. PART NUMBER QTY. DESCRIPTION
1 MALF-906-001 1 BOX FRAME WELDMENT V3.02
2 MALF-906-002 6 BOX FRAME WELDMENT V3.05
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
SEE NOTES
PART NUMBER: REV
SHEET 2 OF 3
MALF-906
DO NOT SCALE
LIFTING CLEVIS, WELDMENT
ggoldman
FINISH
SEE NOTES
CREATED: 11/19/2022
SIZE
AUNLESS OTHERWISE SPECIFIED
G2 ENGINEERING
CONSULTING
A A
B B
C C
D D
1'0"
6" 6"
2"
4"
6"
1-3/4"
R2"
MALF-906-001
1-1/4"
2-3/4"
3" 3/4"
2"
2" 1"
MALF-906-002
3/4"
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
SEE NOTES
PART NUMBER: REV
SHEET 3 OF 3
MALF-906
DO NOT SCALE
LIFTING CLEVIS, WELDMENT
ggoldman
FINISH
SEE NOTES
CREATED: 11/19/2022
SIZE
AUNLESS OTHERWISE SPECIFIED
G2 ENGINEERING
CONSULTING
A A
B B
C C
D D
| Weldment |
| Drawing View1 |
| Drawing View3 |
| Drawing View4 |
| Drawing View5 |
| Drawing View6 |
| BOM |
| Drawing View7 |
| Components |
| Drawing View9 |
| Drawing View10 |
| Drawing View11 |
| Drawing View12 |
File details come from the government source that posted it. Updated .