MALF-603 (Draft).pdf
PDF 679 KB Posted
- Solicitation number
- W912EQ25SS0010
About this file
This document is a technical drawing for a Side Alignment Assembly (Part Number MALF-603) created by G2 Engineering Consulting. The detailed engineering draft shows a complex mechanical component with precise dimensional specifications, including multiple views and an exploded parts list. The assembly consists of five key components: a Side Alignment Weldment (MALF-909), an Alignment Wear Plate (MALF-104), and various hardware including hex cap screws and flat washers.
The technical specifications include critical manufacturing requirements such as ABS material certification, welding standards per AWS D1.1, and comprehensive non-destructive testing (NDT) protocols. Specific NDT requirements mandate 100% volumetric testing of critical butt welds and 100% surface testing on both sides of critical fillet welds. Dimensional tolerances are tightly controlled, with angular tolerances of ±0.5 degrees and decimal place tolerances ranging from ±0.005 to ±0.05 inches. The draft is marked as confidential and was created by Marc Dickinson on 10/26/2022, with a revision level of 0.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MALF-901-A_B (Draft).PDF | ||
| MALF-911 (Draft).pdf | ||
| MALF-600 (Draft).pdf | ||
| MALF-908 (Draft).pdf | ||
| MALF-604 (Draft).pdf | ||
| MALF-602 (Draft).pdf | ||
| MALF-105 (Draft).pdf | ||
| MALF-104 (Draft).pdf | ||
| REQUEST FOR INFORMATION (RFI) - ACM LIFTING FRAMES.pdf | ||
| MALF-903-A_B (Draft).pdf | ||
| MALF-100-101-102-103 (Draft).pdf | ||
| MALF (Draft).pdf | ||
| MALF-912 (Draft).pdf | ||
| MALF-606 (Draft).pdf | ||
| MALF-907 (Draft).pdf | ||
| MALF-906 (Draft).pdf | ||
| MALF-601 (Draft).pdf | ||
| MALF-902 (Draft).pdf | ||
| MALF-910 (Draft).pdf | ||
| MALF-909 (Draft).pdf | ||
| MALF-605 (Draft).pdf |
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
9"
466.36 18.361
35.74 1.407
502.10 19.768
1478.64 58.214
NOTE:
UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •
APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"
MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND
TEST RESULTS.
ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •
TESTING:
100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDS•
100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDS•
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
SEE NOTES
SIZE
B
PART NUMBER: REV
UNLESS OTHERWISE SPECIFIED
SHEET 1 OF 2
MALF-603
DO NOT SCALE
SIDE ALIGNMENT ASSEMBLYG2 ENGINEERING
CONSULTING
FINISH
SEE NOTES
CREATED:
Marc.Dickinson
10/26/2022
A A
B B
C C
D D
DRAFT
NOTE:
UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •
APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"
MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND
TEST RESULTS.
ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •
TESTING:
100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDS•
100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDS•
ITEM
NO. PART NUMBER QTY. DESCRIPTION
1 MALF-909 1 Side Alignment Weldment
2 MALF-104 1 ALIGNMENT WEAR PLATE
3 STOCK 6 3'8-16 X 1.0in HCS
4 98025A036 6 3/4" FLAT WASHER, GRADE 8 STEEL
5 STOCK 6 3'4-10 X 2.0in HEAVY HCS
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
SEE NOTES
SIZE
B
PART NUMBER: REV
UNLESS OTHERWISE SPECIFIED
SHEET 2 OF 2
MALF-603
DO NOT SCALE
SIDE ALIGNMENT ASSEMBLYG2 ENGINEERING
CONSULTING
FINISH
SEE NOTES
CREATED:
Marc.Dickinson
10/26/2022
A A
B B
C C
D D
DRAFT
| Weldment |
| Drawing View1 |
| Drawing View3 |
| Drawing View5 |
| Drawing View6 |
| Drawing View7 |
| BOM |
| Drawing View2 |
File details come from the government source that posted it. Updated .