MALF-604 (Draft).pdf
PDF 816 KB Posted
- Solicitation number
- W912EQ25SS0010
About this file
The document is a technical engineering drawing for a G2 Engineering Lifting Arm Assembly (Part Number MALF-604), created on 10/26/2022. The detailed two-page draft technical drawing provides precise specifications for a lifting arm with multiple components, including:
Key technical specifications include precise dimensional measurements (5'3-1/2" height), material certification requirements, and welding standards. The Bill of Materials lists eight specific components, including a lifting arm pivot (MALF-901-B), various fasteners, bearing retention plates, and a lifting arm bottom weldment. The design incorporates high-load ultra-low-friction sleeve bearings and specifies strict material and welding requirements, including 100% volumetric and surface non-destructive testing for critical welds. The drawing is marked as confidential and includes detailed tolerance specifications for manufacturing.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MALF-901-A_B (Draft).PDF | ||
| MALF-911 (Draft).pdf | ||
| MALF-600 (Draft).pdf | ||
| MALF-908 (Draft).pdf | ||
| MALF-602 (Draft).pdf | ||
| MALF-105 (Draft).pdf | ||
| MALF-104 (Draft).pdf | ||
| REQUEST FOR INFORMATION (RFI) - ACM LIFTING FRAMES.pdf | ||
| MALF-903-A_B (Draft).pdf | ||
| MALF-100-101-102-103 (Draft).pdf | ||
| MALF (Draft).pdf | ||
| MALF-912 (Draft).pdf | ||
| MALF-606 (Draft).pdf | ||
| MALF-907 (Draft).pdf | ||
| MALF-603 (Draft).pdf | ||
| MALF-906 (Draft).pdf | ||
| MALF-601 (Draft).pdf | ||
| MALF-902 (Draft).pdf | ||
| MALF-910 (Draft).pdf | ||
| MALF-909 (Draft).pdf | ||
| MALF-605 (Draft).pdf |
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5'3-1/2"
1'5-7/16"
1233.51 48.563
1'1-1/4"
NOTE:
UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •
APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"
MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND
TEST RESULTS.
ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •
TESTING:
100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDS•
100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDS•
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
SEE NOTES
SIZE
B
PART NUMBER: REV
UNLESS OTHERWISE SPECIFIED
SHEET 1 OF 2
MALF-604
DO NOT SCALE
LIFTING ARM ASMG2 ENGINEERING
CONSULTING
FINISH
SEE NOTES
CREATED:
ggoldman
10/26/2022
A A
B B
C C
D D
DRAFT
NOTE:
UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •
APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"
MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND
TEST RESULTS.
ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •
TESTING:
100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDS•
100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDS•
ITEM
NO. PART NUMBER QTY. DESCRIPTION
1 MALF-901-B 1 LIFTING ARM PIVOT, MACHINED
2 98025A036 20 3/4" FLAT WASHER, GRADE 8 STEEL
3 STOCK 10 3'4-10 X 2.5in HEAVY HCS
4 STOCK 10 3'4"-10 HEX HEAVY NUT
5 STOCK 16 1'4-20 X 0.75in FHSCS
6 2 High-Load Ultra-Low-Friction Sleeve Bearing
7 MALF-101 2 BEARING RETENTION PLATE
8 MALF-902 1 LIFTING ARM BOTTOM, WELDMENT
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
SEE NOTES
SIZE
B
PART NUMBER: REV
UNLESS OTHERWISE SPECIFIED
SHEET 2 OF 2
MALF-604
DO NOT SCALE
LIFTING ARM ASMG2 ENGINEERING
CONSULTING
FINISH
SEE NOTES
CREATED:
ggoldman
10/26/2022
A A
B B
C C
D D
DRAFT
| Weldment |
| Drawing View1 |
| Drawing View3 |
| Drawing View4 |
| Drawing View5 |
| Drawing View6 |
| BOM |
| Drawing View7 |
| Drawing View8 |
File details come from the government source that posted it. Updated .