MALF-105 (Draft).pdf
PDF 610 KB Posted
- Solicitation number
- W912EQ25SS0010
About this file
This document is a technical engineering drawing (draft) for a Bottom Bumper Plate, part number MALF-105, created by G2 Engineering Consulting on 10/26/2022. The detailed technical drawing specifies precise dimensional measurements for a component made of Nylon MD material, with critical manufacturing specifications including:
Welding and material certification requirements mandate ABS material certification, mill-issued material certificates, adherence to AWS D1.1 Structural Welding Code, and comprehensive non-destructive testing (NDT) protocols. Specific testing requirements include 100% volumetric NDT for critical butt welds and 100% surface NDT on both sides of critical fillet welds. Dimensional tolerances are tightly controlled, with angular tolerances of 0.5 degrees and decimal place tolerances ranging from 0.05 to 0.005 inches. The drawing is marked as a draft and includes a note restricting distribution without consent.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MALF-901-A_B (Draft).PDF | ||
| MALF-911 (Draft).pdf | ||
| MALF-600 (Draft).pdf | ||
| MALF-908 (Draft).pdf | ||
| MALF-604 (Draft).pdf | ||
| MALF-602 (Draft).pdf | ||
| MALF-104 (Draft).pdf | ||
| REQUEST FOR INFORMATION (RFI) - ACM LIFTING FRAMES.pdf | ||
| MALF-903-A_B (Draft).pdf | ||
| MALF-100-101-102-103 (Draft).pdf | ||
| MALF (Draft).pdf | ||
| MALF-912 (Draft).pdf | ||
| MALF-606 (Draft).pdf | ||
| MALF-907 (Draft).pdf | ||
| MALF-603 (Draft).pdf | ||
| MALF-906 (Draft).pdf | ||
| MALF-601 (Draft).pdf | ||
| MALF-902 (Draft).pdf | ||
| MALF-910 (Draft).pdf | ||
| MALF-909 (Draft).pdf | ||
| MALF-605 (Draft).pdf |
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
6"
4"
3/4"
4-1/2"
3/4"
3/4" 2-1/2" 3/4"
1/2" X 45°
A A
1"
6.43 .253
18.97 .747
13/16"
10.08 .397
1"
1/8" X 45°, ALL AROUND
SECTION A-A
SCALE 1 : 1
NOTE:
UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •
APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"
MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND
TEST RESULTS.
ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •
TESTING:
100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDS•
100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDS•
DRAWN BY:
THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED
CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH .5 DEG
ONE PLACE DECIMAL .05
TWO PLACE DECIMAL .01
THREE PLACE DECIMAL .005
MATERIAL
Nylon MD
SIZE
B
PART NUMBER: REV
UNLESS OTHERWISE SPECIFIED
SHEET 1 OF 1
MALF-105
DO NOT SCALE
BOTTOM BUMPER PLATEG2 ENGINEERING
CONSULTING
FINISH
UNFINISHED
CREATED:
Marc.Dickinson
10/26/2022
A A
B B
C C
D D
DRAFT
| Weldment |
| Drawing View1 |
| Drawing View2 |
| Section View A-A |
File details come from the government source that posted it. Updated .