MALF-901-A_B (Draft).PDF

1'9"

1'5-7/16"

2-5/8"

8"

217.51 8.563

204.76 8.062

8"

10-7/16"

10-1/4"

6-1/4"

1"

19.84 .781

6"

8-1/4"

NOTE:

UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •

APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"

MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND

TEST RESULTS.

ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •

TESTING:

100% VOLUMETRIC NDT OF ALL CRITICAL BUTT WELDS•

100% SUFACE NDT ON BOTH SIDES OF CRITICAL FILLET WELDS•

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

SEE NOTES

PART NUMBER: REV

SHEET 1 OF 5

MALF-901-A

DO NOT SCALE

LIFTING ARM PIVOT, WELDMENT

ggoldman

FINISH

SEE NOTES

CREATED: 8/24/2022

SIZE

AUNLESS OTHERWISE SPECIFIED

A A

B B

C C

D D

G2 ENGINEERING

CONSULTING

DRAFT

NOTE:

UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •

APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"

MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND

TEST RESULTS.

ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •

TESTING:

ITEM

NO. PART NUMBER QTY.

1 MALF-901-001 1

2 MALF-901-002 1

3 MALF-901-003 2

4 MALF-901-004 4

5 MALF-901-005 2

6 MALF-901-006 1

7 MALF-901-007 1

8 MALF-901-008 1

9 MALF-901-009 1

10 MALF-901-010 1

11 MALF-901-011 1

12 MALF-901-007-B 1

13 MALF-901-013 1

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

SEE NOTES

PART NUMBER: REV

SHEET 2 OF 5

MALF-901-A

DO NOT SCALE

LIFTING ARM PIVOT, WELDMENT

ggoldman

FINISH

SEE NOTES

CREATED: 8/24/2022

SIZE

AUNLESS OTHERWISE SPECIFIED

A A

B B

C C

D D

G2 ENGINEERING

2-5/8"

217.51 8.563

8"

204.76 8.062

A

7"

3-1/2"

A

B

.201 5.11 1"

TAP 1/4"-20

2-3/4"

B

B

DETAIL A

SCALE 1 : 4

61.00+

0.20 0.00

2.402+ .008 0"

52.00 2.047

60.00+

0.51 0.00

2.362+ .020 0"

3/8"

SECTION B-B

SCALE 1 : 4

NOTE:

UNLESS OTHERWISE SPECIFIED ALL MATEIRALS USED IN CONSTRUCTION OF COMPONETNS ARE TO HAVE ABS MATERIAL CERTIFICATION IN ACCORDINATE WITH THE •

APPLICAPLE SECIONS OF "ABS RULES FOR MATERIALS AND WLEDING (PART 2)"

MATERIALS ARE TO BE FURNISHED WITH CERTIFICATES ISSUED BY THE MILL OR MATERIAL MANUFACTURER, INDICATING, AS A MINIMUM AND AS APPLICABLE, THE • MATERIAL SPECIFICATION, GRADE, PROCESS OF MANUFACTURE, HEAT TREATMENT DETAILS, MECHANICAL AND CHEMICAL PROPERTIES, IDENTIFICATION NUMBERS, AND

TEST RESULTS.

ALL WELDING SHALL BE IN ACCORDANCE WITH THE LATEST EDITION OF AWS D1.1 "STRUCTURAL WELDING CODE - STEEL"• ALL WELDS SHALL BE TESTED USING EITHER VOLUMETRIC RADIOGRAPHIC TESTING (RT) OR ULTRASONIC TESTING (UT) METHODS OR SURFACE NDT TECNIQUES INCLUDING • MAGNETIC PARTICLE INSPECTION (MPI), PENETRANT TESTING (PT), EDDY CURRENT (EC) OR ALTERNATING CURRENT FIELD MEASURMENT (AFCM) CRITICAL WELDS ARE TO BE SUBJECTED TO THE FOLLOWING NONDESTRUCTIVE TESTING TO THE SATISFACTION OF THE ATTENDING SURVEYOR PRIOR TO PROOF LOAD •

TESTING:

NOTE:

POST MACHINE PROCESS TO OCCUR AFTER ALL

WELDS ARE COMPLETED AND INSPECTED AS PER

SPECIFICATION

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

SEE NOTES

PART NUMBER: REV

SHEET 3 OF 5

MALF-901-A

DO NOT SCALE

LIFTING ARM PIVOT, WELDMENT

ggoldman

FINISH

SEE NOTES

CREATED: 8/24/2022

SIZE

AUNLESS OTHERWISE SPECIFIED

A A

B B

C C

D D

G2 ENGINEERING

1'2-5/8"

5-1/2"

3/8"

MALF-901-001

7.490

5-1/2"

3/8"

6.232

3/4"

54° 105° 4"

53.52 2.107

1/2"

8"

2"

1"

1"

3/8"

1'3-1/2"

97°

8"

R2"

75°

134.67 5.302

3-1/2"

284.19 11.188

207.99 8.188

9-7/16"

8"

3/8"

1'3-1/2"

214.34 8.438

3/8"

R1"

111.99 4.409

143.72 5.658

3/8"

323.69 12.744

145.98 5.747

1-1/2"

1/2" 30°

R1/2"

DO

W

N

.1

4° R

MALF-901-002

MALF-901-003

MALF-901-004

MALF-901-005

MALF-901-006 MALF-901-007-A

(MALF-901-007-B MIRROR)

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

ASTM A572 Grade 50 Steel

PART NUMBER: REV

SHEET 4 OF 5

SEE SHEET

DO NOT SCALE

LIFTING ARM PIVOT, WELDMENT

ggoldman

FINISH

UNFINISHED

CREATED: 8/24/2022

SIZE

AUNLESS OTHERWISE SPECIFIED

A A

B B

C C

D D

G2 ENGINEERING

104.72 4.123

3/8"

7.918

5-1/2"

3/8"

.781 THRU

10-1/4"

8"

1/2"

1/2"

3/8"

7-1/2"

3-1/2"

.726MIN

5-1/2"

1'2-7/8"

3/8"

MALF-901-008

MALF-901-009

MALF-901-010

MALF-901-011

MALF-901-012

DRAWN BY:

THE INFORMATION CONTAINED IN THIS DRAWING IS CONSIDERED

CONFIDENTIAL. CONTENT SHOULD NOT BE DISTRIBUTED WITHOUT CONSENT

DIMENSIONS ARE IN INCHES

TOLERANCES:

ANGULAR: MACH .5 DEG

ONE PLACE DECIMAL .05

TWO PLACE DECIMAL .01

THREE PLACE DECIMAL .005

MATERIAL

ASTM A572 Grade 50 Steel

PART NUMBER: REV

SHEET 5 OF 5

SEE SHEET

DO NOT SCALE

LIFTING ARM PIVOT, WELDMENT

ggoldman

FINISH

UNFINISHED

CREATED: 8/24/2022

SIZE

AUNLESS OTHERWISE SPECIFIED

A A

B B

C C

D D

G2 ENGINEERING