J-0200000-03 29 CFR 1910 - OSH Standards.pdf

Occupational Safety and Health Admin., Labor Pt. 1910

(d) Location of sample Cooperative Agreement. A sample Agreement is available for inspection at all Regional Offices of the Occupational Safety and Health Administration of the U.S. De-partment of Labor.

(e) Action upon requests. The State will be notified within a reasonable pe-riod of time of any decision concerning its request for a Cooperative Agree-ment. If a request is denied, the State will be informed in writing of the rea-sons supporting the decision. If a Coop-erative Agreement is negotiated, the initial finding will specify the period for the Agreement. Additional funds may be added at a later time provided the activity is satisfactorily carried out and appropriations are available.

The State may also be required to amend the Agreement for continued support.

(f) Termination. Either party may ter-minate a Cooperative Agreement under this part upon 30 days’ written notice to the other party.

(Approved by the Office of Management and Budget under control number 1218–0110)

[49 FR 25094, June 19, 1984, as amended at 54 FR 24333, June 7, 1989]

§ 1908.11 Exclusions.

A Cooperative Agreement under this part will not restrict in any manner the authority and responsibility of the Assistant Secretary under sections 8, 9, 10, 13, and 17 of the Act, or any cor-responding State authority.

PART 1910—OCCUPATIONAL

SAFETY AND HEALTH STANDARDS

Subpart A—General

Sec.

1910.1 Purpose and scope.

1910.2 Definitions.

1910.3 Petitions for the issuance, amend-

ment, or repeal of a standard.

1910.4 Amendments to this part.

1910.5 Applicability of standards.

1910.6 Incorporation by reference.

1910.7 Definition and requirements for a na-

tionally recognized testing laboratory.

1910.8 OMB control numbers under the Pa-

perwork Reduction Act.

Subpart B—Adoption and Extension of Established Federal Standards

1910.11 Scope and purpose.

1910.12 Construction work.

1910.15 Shipyard employment.

1910.16 Longshoring and marine terminals.

1910.17 Effective dates.

1910.18 Changes in established Federal

standards.

1910.19 Special provisions for air contami-

nants.

Subpart C [Reserved]

Subpart D—Walking-Working Surfaces

1910.21 Definitions.

1910.22 General requirements.

1910.23 Guarding floor and wall openings

and holes.

1910.24 Fixed industrial stairs.

1910.25 Portable wood ladders.

1910.26 Portable metal ladders.

1910.27 Fixed ladders.

1910.28 Safety requirements for scaffolding.

1910.29 Manually propelled mobile ladder

stands and scaffolds (towers).

1910.30 Other working surfaces.

Subpart E—Means of Egress

1910.33 Table of contents.

1910.34 Coverage and definitions.

1910.35 Compliance with NFPA 101–2000, Life

Safety Code.

1910.36 Design and construction require-

ments for exit routes.

1910.37 Maintenance, safeguards, and oper-

ational features for exit routes.

1910.38 Emergency action plans.

1910.39 Fire prevention plans.

APPENDIX TO SUBPART E—EXIT ROUTES,

EMERGENCY ACTION PLANS, AND FIRE PRE-

VENTION PLANS

Subpart F—Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms

1910.66 Powered platforms for building

maintenance.

1910.67 Vehicle-mounted elevating and ro-

tating work platforms.

1910.68 Manlifts.

Subpart G—Occupational Health and Environmental Control

1910.94 Ventilation.

1910.95 Occupational noise exposure.

1910.97 Nonionizing radiation.

1910.98 Effective dates.

Subpart H—Hazardous Materials

1910.101 Compressed gases (general require-

ments).

1910.102 Acetylene.

1910.103 Hydrogen.

1910.104 Oxygen.

1910.105 Nitrous oxide.

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00097 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

F R

29 CFR Ch. XVII (7–1–07 Edition) Pt. 1910

1910.106 Flammable and combustible liq-

uids.

1910.107 Spray finishing using flammable

and combustible materials.

1910.108 [Reserved]

1910.109 Explosives and blasting agents.

1910.110 Storage and handling of liquified

petroleum gases.

1910.111 Storage and handling of anhydrous

ammonia.

1910.112–1910.113 [Reserved]

1910.119 Process safety management of high-

ly hazardous chemicals.

1910.120 Hazardous waste operations and

emergency response.

1910.121 [Reserved]

DIPPING AND COATING OPERATIONS

1910.122 Table of contents.

1910.123 Dipping and coating operations:

Coverage and definitions.

1910.124 General requirements for dipping

and coating operations.

1910.125 Additional requirements for dipping

and coating operations that use flam-mable or combustible liquids.

1910.126 Additional requirements for special

dipping and coating operations.

Subpart I—Personal Protective Equipment

1910.132 General requirements.

1910.133 Eye and face protection.

1910.134 Respiratory protection.

1910.135 Head protection.

1910.136 Foot protection.

1910.137 Electrical protective equipment.

1910.138 Hand protection.

APPENDIX A TO SUBPART I—REFERENCES FOR

FURTHER INFORMATION (NON-MANDATORY)

APPENDIX B TO SUBPART I—NON-MANDATORY

COMPLIANCE GUIDELINES FOR HAZARD AS-

SESSMENT AND PERSONAL PROTECTIVE

EQUIPMENT SELECTION

Subpart J—General Environmental Controls

1910.141 Sanitation.

1910.142 Temporary labor camps.

1910.143 Nonwater carriage disposal sys-

tems. [Reserved]

1910.144 Safety color code for marking phys-

ical hazards.

1910.145 Specifications for accident preven-

tion signs and tags.

1910.146 Permit-required confined spaces.

1910.147 The control of hazardous energy

(lockout/tagout).

Subpart K—Medical and First Aid

1910.151 Medical services and first aid.

1910.152 [Reserved]

Subpart L—Fire Protection

1910.155 Scope, application and definitions

applicable to this subpart.

1910.156 Fire brigades.

PORTABLE FIRE SUPPRESSION EQUIPMENT

1910.157 Portable fire extinguishers.

1910.158 Standpipe and hose systems.

FIXED FIRE SUPPRESSION EQUIPMENT

1910.159 Automatic sprinkler systems.

1910.160 Fixed extinguishing systems, gen-

eral.

1910.161 Fixed extinguishing systems, dry

chemical.

1910.162 Fixed extinguishing systems, gas-

eous agent.

1910.163 Fixed extinguishing systems, water

spray and foam.

OTHER FIRE PROTECTION SYSTEMS

1910.164 Fire detection systems.

1910.165 Employee alarm systems.

APPENDICES TO SUBPART L OF PART 1910—

NOTE

APPENDIX A TO SUBPART L—FIRE PROTECTION

APPENDIX B TO SUBPART L—NATIONAL CON-

SENSUS STANDARDS

APPENDIX C TO SUBPART L—FIRE PROTECTION

REFERENCES FOR FURTHER INFORMATION

APPENDIX D TO SUBPART L—AVAILABILITY OF

PUBLICATIONS INCORPORATED BY REF-

ERENCE IN SECTION 1910.156 FIRE BRIGADES

APPENDIX E TO SUBPART L—TEST METHODS

FOR PROTECTIVE CLOTHING

Subpart M—Compressed Gas and Compressed Air Equipment

1910.166–1910.168 [Reserved]

1910.169 Air receivers.

Subpart N—Materials Handling and Storage

1910.176 Handling materials—general.

1910.177 Servicing multi-piece and single

piece rim wheels.

1910.178 Powered industrial trucks.

1910.179 Overhead and gantry cranes.

1910.180 Crawler locomotive and truck

cranes.

1910.181 Derricks.

1910.183 Helicopters.

1910.184 Slings.

Subpart O—Machinery and Machine Guarding

1910.211 Definitions.

1910.212 General requirements for all ma-

chines.

1910.213 Woodworking machinery require-

ments.

1910.214 Cooperage machinery. [Reserved]

1910.215 Abrasive wheel machinery.

1910.216 Mills and calenders in the rubber

and plastics industries.

1910.217 Mechanical power presses.

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00098 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

Occupational Safety and Health Admin., Labor Pt. 1910

1910.218 Forging machines.

1910.219 Mechanical power-transmission ap-

paratus.

Subpart P—Hand and Portable Powered Tools and Other Hand-Held Equipment

1910.241 Definitions.

1910.242 Hand and portable powered tools

and equipment, general.

1910.243 Guarding of portable powered tools.

1910.244 Other portable tools and equip-

ment.

Subpart Q—Welding, Cutting and Brazing

1910.251 Definitions.

1910.252 General requirements.

1910.253 Oxygen-fuel gas welding and cut-

ting.

1910.254 Arc welding and cutting.

1910.255 Resistance welding.

Subpart R—Special Industries

1910.261 Pulp, paper, and paperboard mills.

1910.262 Textiles.

1910.263 Bakery equipment.

1910.264 Laundry machinery and operations.

1910.265 Sawmills.

1910.266 Logging operations.

1910.268 Telecommunications.

1910.269 Electric power generation, trans-

mission, and distribution.

1910.272 Grain handling facilities.

Subpart S—Electrical

GENERAL

1910.301 Introduction.

DESIGN SAFETY STANDARDS FOR ELECTRICAL

SYSTEMS

1910.302 Electric utilization systems.

1910.303 General requirements.

1910.304 Wiring design and protection.

1910.305 Wiring methods, components, and

equipment for general use.

1910.306 Specific purpose equipment and in-

stallations.

1910.307 Hazardous (classified) locations.

1910.308 Special systems.

1910.309–1910.330 [Reserved]

SAFETY-RELATED WORK PRACTICES

1910.331 Scope.

1910.332 Training.

1910.333 Selection and use of work practices.

1910.334 Use of equipment.

1910.335 Safeguards for personnel protec-

tion.

1910.336–1910.360 [Reserved]

SAFETY-RELATED MAINTENANCE

REQUIREMENTS

1910.361–1910.380 [Reserved]

SAFETY REQUIREMENTS FOR SPECIAL

EQUIPMENT

1910.381–1910.398 [Reserved]

DEFINITIONS

1910.399 Definitions applicable to this sub-

part.

APPENDIX A TO SUBPART S—REFERENCE DOC-

UMENTS

APPENDIX B TO SUBPART S—EXPLANATORY

DATA [RESERVED]

APPENDIX C TO SUBPART S—TABLES, NOTES,

AND CHARTS [RESERVED]

Subpart T—Commercial Diving Operations

GENERAL

1910.401 Scope and application.

1910.402 Definitions.

PERSONNEL REQUIREMENTS

1910.410 Qualifications of dive team.

GENERAL OPERATIONS PROCEDURES

1910.420 Safe practices manual.

1910.421 Pre-dive procedures.

1910.422 Procedures during dive.

1910.423 Post-dive procedures.

SPECIFIC OPERATIONS PROCEDURES

1910.424 SCUBA diving.

1910.425 Surface-supplied air diving.

1910.426 Mixed-gas diving.

1910.427 Liveboating.

EQUIPMENT PROCEDURES AND REQUIREMENTS

1910.430 Equipment.

RECORDKEEPING

1910.440 Recordkeeping requirements.

APPENDIX A TO SUBPART T OF PART 1910—EX-

AMPLES OF CONDITIONS WHICH MAY RE-

STRICT OR LIMIT EXPOSURE TO

HYPERBARIC CONDITIONS

APPENDIX B TO SUBPART T OF PART 1910—

GUIDELINES FOR SCIENTIFIC DIVING

APPENDIX C TO SUBPART T OF PART 1910—AL-

TERNATIVE CONDITIONS UNDER

§ 1910.401(a)(3) FOR RECREATIONAL DIVING

INSTRUCTORS AND DIVING GUIDES (MANDA-

TORY)

Subparts U–Y [Reserved]

1910.901–1910.999 [Reserved]

SOURCE: 39 FR 23502, June 27, 1974, unless otherwise noted.

Subpart A—General

AUTHORITY: Sections 4, 6, and 8 of the Occu-pational Safety and Health Act of 1970 (29 U.S.C. 653, 655, and 657); Secretary of Labor’s

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00099 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

29 CFR Ch. XVII (7–1–07 Edition) § 1910.1

Order No. 12–71 (36 FR 8754), 8–76 (41 FR

25059), 9–83 (48 FR 35736), 1–90 (55 FR 9033), 6–

96 (62 FR 111), 3–2000 (65 FR 50017), and 5–2002 (67 FR 65008), as applicable.

Sections 1910.7 and 1910.8 also issued under 29 CFR part 1911. Section 1910.7(f) also issued under 31 U.S.C. 9701, 29 U.S.C. 9 a, 5 U.S.C.

553; Public Law 106–113 (113 Stat. 1501A–222);

and OMB Circular A–25 (dated July 8, 1993) (58 FR 38142, July 15, 1993).

EFFECTIVE DATE NOTE: At 72 FR 7190, Feb-ruary 14, 2007, the authority citation for Sub-part A was revised, effective Aug. 13, 2007.

For the convenience of the user, the revised text is set forth as follows:

AUTHORITY: Sections 4, 6, and 8 of the Occu-pational Safety and Health Act of 1970 (29 U.S.C. 653, 655, and 657); Secretary of Labor’s Order No. 12–71 (36 FR 8754), 8–76 (41 FR

25059), 9–83 (48 FR 35736), 1–90 (55 FR 9033), 6–

96 (62 FR 111), 3–2000 (65 FR 50017), or 5–2002 (67 FR 65008), as applicable.

Sections 1910.6, 1910.7, and 1910.8 also issued under 29 CFR part 1911. Section 1910.7(f) also issued under 31 U.S.C. 9701, 29 U.S.C. 9 a, 5 U.S.C. 553; Public Law 106–113 (113 Stat.

1501A–222); and OMB Circular A–25 (dated July 8, 1993) (58 FR 38142, July 15, 1993).

§ 1910.1 Purpose and scope.

(a) Section 6(a) of the Williams-

Steiger Occupational Safety and Health Act of 1970 (84 Stat. 1593) pro-vides that ‘‘without regard to chapter 5 of title 5, United States Code, or to the other subsections of this section, the Secretary shall, as soon as practicable during the period beginning with the effective date of this Act and ending 2 years after such date, by rule promul-gate as an occupational safety or health standard any national con-sensus standard, and any established Federal standard, unless he determines that the promulgation of such a stand-ard would not result in improved safety or health for specifically designated employees.’’ The legislative purpose of this provision is to establish, as rapidly as possible and without regard to the rule-making provisions of the Adminis-trative Procedure Act, standards with which industries are generally famil-iar, and on whose adoption interested and affected persons have already had an opportunity to express their views.

Such standards are either (1) national concensus standards on whose adoption affected persons have reached substan-tial agreement, or (2) Federal stand-ards already established by Federal statutes or regulations.

(b) This part carries out the directive to the Secretary of Labor under section 6(a) of the Act. It contains occupa-tional safety and health standards which have been found to be national consensus standards or established Federal standards.

§ 1910.2 Definitions.

As used in this part, unless the con-text clearly requires otherwise:

(a) Act means the Williams-Steiger

Occupational Safety and Health Act of 1970 (84 Stat. 1590).

(b) Assistant Secretary of Labor means the Assistant Secretary of Labor for Occupational Safety and Health;

(c) Employer means a person engaged in a business affecting commerce who has employees, but does not include the United States or any State or po-litical subdivision of a State;

(d) Employee means an employee of an employer who is employed in a busi-ness of his employer which affects com-merce;

(e) Commerce means trade, traffic, commerce, transportation, or commu-nication among the several States, or between a State and any place outside thereof, or within the District of Co-lumbia, or a possession of the United States (other than the Trust Territory of the Pacific Islands), or between points in the same State but through a point outside thereof;

(f) Standard means a standard which requires conditions, or the adoption or use of one or more practices, means, methods, operations, or processes, rea-sonably necessary or appropriate to provide safe or healthful employment and places of employment;

(g) National consensus standard means any standard or modification thereof which (1) has been adopted and promul-gated by a nationally recognized stand-ards-producing organization under pro-cedures whereby it can be determined by the Secretary of Labor or by the As-sistant Secretary of Labor that persons interested and affected by the scope or provisions of the standard have reached substantial agreement on its adoption,

(2) was formulated in a manner which afforded an opportunity for diverse views to be considered, and (3) has been designated as such a standard by the Secretary or the Assistant Secretary, VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00100 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

Occupational Safety and Health Admin., Labor § 1910.5 after consultation with other appro-priate Federal agencies; and

(h) Established Federal standard means any operative standard established by any agency of the United States and in effect on April 28, 1971, or contained in any Act of Congress in force on the date of enactment of the Williams- Steiger Occupational Safety and Health Act.

§ 1910.3 Petitions for the issuance, amendment, or repeal of a stand-ard.

(a) Any interested person may peti-tion in writing the Assistant Secretary of Labor to promulgate, modify, or re-voke a standard. The petition should set forth the terms or the substance of the rule desired, the effects thereof if promulgated, and the reasons therefor.

(b)(1) The relevant legislative history of the Act indicates congressional rec-ognition of the American National Standards Institute and the National Fire Protection Association as the major sources of national consensus standards. National consensus stand-ards adopted on May 29, 1971, pursuant to section 6(a) of the Act are from those two sources. However, any orga-nization which deems itself a producer of national consensus standards, within the meaning of section 3(9) of the Act, is invited to submit in writing to the Assistant Secretary of Labor at any time prior to February 1, 1973, all rel-evant information which may enable the Assistant Secretary to determine whether any of its standards satisfy the requirements of the definition of ‘‘national consensus standard’’ in sec-tion 3(9) of the Act.

(2) Within a reasonable time after the receipt of a submission pursuant to paragraph (b)(1) of this section, the As-sistant Secretary of Labor shall pub-lish or cause to be published in the FEDERAL REGISTER a notice of such submission, and shall afford interested persons a reasonable opportunity to present written data, views, or argu-ments with regard to the question whether any standards of the organiza-tion making the submission are na-tional consensus standards.

§ 1910.4 Amendments to this part.

(a) The Assistant Secretary of Labor shall have all of the authority of the Secretary of Labor under sections 3(9) and 6(a) of the Act.

(b) The Assistant Secretary of Labor may at any time before April 28, 1973, on his own motion or upon the written petition of any person, by rule promul-gate as a standard any national con-sensus standard and any established Federal standard, pursuant to and in accordance with section 6(a) of the Act, and, in addition, may modify or revoke any standard in this part 1910. In the event of conflict among any such standards, the Assistant Secretary of Labor shall take the action necessary to eliminate the conflict, including the revocation or modification of a stand-ard in this part, so as to assure the greatest protection of the safety or health of the affected employees.

§ 1910.5 Applicability of standards.

(a) Except as provided in paragraph

(b) of this section, the standards con-tained in this part shall apply with re-spect to employments performed in a workplace in a State, the District of Columbia, the Commonwealth of Puer-to Rico, the Virgin Islands, American Samoa, Guam, Trust Territory of the Pacific Islands, Wake Island, Outer Continental Shelf lands defined in the Outer Continental Shelf Lands Act, Johnston Island, and the Canal Zone.

(b) None of the standards in this part shall apply to working conditions of employees with respect to which Fed-eral agencies other than the Depart-ment of Labor, or State agencies act-ing under section 274 of the Atomic En-ergy Act of 1954, as amended (42 U.S.C.

2021), exercise statutory authority to prescribe or enforce standards or regu-lations affecting occupational safety or health.

(c)(1) If a particular standard is spe-cifically applicable to a condition, practice, means, method, operation, or process, it shall prevail over any dif-ferent general standard which might otherwise be applicable to the same condition, practice, means, method, op-eration, or process. For example, § 1915.23(c)(3) of this title prescribes

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00101 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

29 CFR Ch. XVII (7–1–07 Edition) § 1910.6 personal protective equipment for cer-tain ship repairmen working in speci-fied areas. Such a standard shall apply, and shall not be deemed modified nor superseded by any different general standard whose provisions might other-wise be applicable, to the ship repair-men working in the areas specified in § 1915.23(c)(3).

(2) On the other hand, any standard shall apply according to its terms to any employment and place of employ-ment in any industry, even though par-ticular standards are also prescribed for the industry, as in subpart B or sub-part R of this part, to the extent that none of such particular standards ap-plies. To illustrate, the general stand-ard regarding noise exposure in § 1910.95 applies to employments and places of employment in pulp, paper, and paper-board mills covered by § 1910.261.

(d) In the event a standard protects on its face a class of persons larger than employees, the standard shall be applicable under this part only to em-ployees and their employment and places of employment.

(e) [Reserved]

(f) An employer who is in compliance with any standard in this part shall be deemed to be in compliance with the requirement of section 5(a)(1) of the Act, but only to the extent of the con-dition, practice, means, method, oper-ation, or process covered by the stand-ard.

[39 FR 23502, June 27, 1974, as amended at 58 FR 35308, June 30, 1993]

§ 1910.6 Incorporation by reference.

(a)(1) The standards of agencies of the U.S. Government, and organiza-tions which are not agencies of the U.S. Government which are incor-porated by reference in this part, have the same force and effect as other standards in this part. Only the manda-tory provisions (i.e., provisions con-taining the word ‘‘shall’’ or other man-datory language) of standards incor-porated by reference are adopted as standards under the Occupational Safe-ty and Health Act.

(2) Any changes in the standards in-corporated by reference in this part and an official historic file of such changes are available for inspection at the national office of the Occupational

Safety and Health Administration, U.S. Department of Labor, Washington, DC 20210.

(3) The materials listed in paragraphs

(b) through (w) of this section are in-corporated by reference in the cor-responding sections noted as they exist on the date of the approval, and a no-tice of any change in these materials will be published in the FEDERAL REG- ISTER. These incorporations by ref-erence were approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.

(4) Copies of the following standards that are issued by the respective pri-vate standards organizations may be obtained from the issuing organiza-tions. The materials are available for purchase at the corresponding address-es of the private standards organiza-tions noted below. In addition, all are available for inspection through the OSHA Docket Office, room N2625, U.S.

Department of Labor, 200 Constitution Ave., Washington, DC 20210, or any of its regional offices or at the National Archives and Records Administration (NARA). For information on the avail-ability of this material at NARA, call 202–741–6030, or go to: http:// www.archives.gov/federallregister/ codeloflfederallregulations/ ibrllocations.html.

(b) The following material is avail-able for purchase from the American Conference of Governmental Industrial Hygienists (ACGIH), 1014 Broadway, Cincinnati OH 45202:

(1) ‘‘Industrial Ventilation: A Manual of Recommended Practice’’ (22nd ed., 1995), incorporation by reference (IBR) approved for § 1910.124(b)(4)(iii).

(2) Threshold Limit Values and Bio-logical Exposure Indices for 1986–87 (1986), IBR approved for § 1910.120, PEL definition.

(c) The following material is avail-able for purchase from the American Society of Agricultural Engineers (ASAE), 2950 Niles Road, Post Office Box 229, St. Joseph, MI 49085:

(1) ASAE Emblem for Identifying Slow Moving Vehicles, ASAE S276.2 (1968), IBR approved for § 1910.145(d)(10).

(2) [Reserved]

(d) The following material is avail-able for purchase from the Agriculture

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00102 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

Occupational Safety and Health Admin., Labor § 1910.6

Ammonia Institute-Rubber Manufac-turers (AAI-RMA) Association, 1400 K St. NW, Washington DC 20005:

(1) AAI-RMA Specifications for An-hydrous Ammonia Hose, IBR approved for § 1910.111(b)(8)(i).

(2) [Reserved]

(e) The following material is avail-able for purchase from the American National Standards Institute (ANSI), 11 West 42nd St., New York, NY 10036:

(1) ANSI A10.2–44 Safety Code for Building Construction, IBR approved for § 1910.144(a)(1)(ii).

(2) ANSI A10.3–70 Safety Require-ments for Explosive-Actuated Fas-tening Tools, IBR approved for § 1910.243(d)(1)(i).

(3) ANSI A11.1–65 (R 70) Practice for Industrial Lighting, IBR approved for §§ 1910.219(c)(5)(iii); 1910.261 (a)(3)(i), (c)(10), and (k)(21); and 1910.265(c)(2).

(4) ANSI A11.1–65 Practice for Indus-trial Lighting, IBR approved for §§ 1910.262(c)(6) and 1910.265(d)(2)(i)(a).

(5) ANSI A12.1–67 Safety Require-ments for Floor and Wall Openings, Railings, and Toe Boards, IBR ap-proved for §§ 1910.66 appendix D, (c)(4);

1910.68 (b)(4) and (b)(8)(ii); 1910.261 (a)(3)(ii), (b)(3), (c)(3)(i), (c)(15)(ii), (e)(4), (g)(13), (h)(1), (h)(3)(vi), (j)(4) (ii) and (iv), (j)(5)(i), (k)(6), (k)(13)(i), and (k)(15).

(6) ANSI A13.1–56 Scheme for the Identification of Piping Systems, IBR approved for §§ 1910.253(d)(4)(ii);

1910.261(a)(3)(iii); 1910.262(c)(7).

(7) ANSI A14.1–68 Safety Code for Portable Wood Ladders, Supplemented by ANSI A14.1a–77, IBR approved for § 1910.261 (a)(3)(iv) and (c)(3)(i).

(8) ANSI A14.2–56 Safety Code for Portable Metal Ladders, Supplemented by ANSI A14.2a–77, IBR approved for § 1910.261 (a)(3)(v) and (c)(3)(i).

(9) ANSI A14.3–56 Safety Code for Fixed Ladders, IBR approved for §§ 1910.68(b) (4) and (12); 1910.179(c)(2);

and 1910.261 (a)(3)(vi) and (c)(3)(i).

(10) ANSI A17.1–65 Safety Code for Elevators, Dumbwaiters and Moving Walks, Including Supplements, A17.1a (1967); A17.1b (1968); A17.1c (1969); A17.1d (1970), IBR approved for § 1910.261 (a)(3)(vii), (g)(11)(i), and (l)(4).

(11) ANSI A17.2–60 Practice for the Inspection of Elevators, Including Sup-plements, A17.2a (1965), A17.2b (1967), IBR approved for § 1910.261(a)(3)(viii).

(12) ANSI A90.1–69 Safety Standard for Manlifts, IBR approved for § 1910.68(b)(3).

(13) ANSI A92.2–69 Standard for Vehi-cle Mounted Elevating and Rotating Work Platforms, IBR approved for § 1910.67 (b)(1), (2), (c)(3), and (4) and 1910.268(s)(1)(v).

(14) ANSI A120.1–70 Safety Code for Powered Platforms for Exterior Build-ing Maintenance, IBR approved for § 1910.66 app. D (b) through (d).

(15) ANSI B7.1–70 Safety Code for the Use, Care and Protection of Abrasive Wheels, IBR approved for §§ 1910.94(b)(5)(i)(a); 1910.215(b)(12); and 1910.218(j)(5).

(16) ANSI B15.1–53 (R 58) Safety Code for Mechanical Power Transmission Apparatus, IBR approved for §§ 1910.68(b)(4) and 1910.261 (a)(3)(ix), (b)(1), (e)(3), (e)(9), (f)(4), (j)(5)(iv), (k)(12), and (l)(3).

(17) ANSI B20.1–57 Safety Code for Conveyors, Cableways, and Related Equipment, IBR approved for §§ 1910.218(j)(3); 1910.261 (a)(3)(x), (b)(1), (c)(15)(iv), (f)(4), and (j)(2);

1910.265(c)(18)(i).

(18) ANSI B30.2–43 (R 52) Safety Code for Cranes, Derricks, and Hoists, IBR approved for § 1910.261 (a)(3)(xi), (c)(2)(vi), and (c)(8) (i) and (iv).

(19) ANSI B30.2.0–67 Safety Code for Overhead and Gantry Cranes, IBR ap-proved for §§ 1910.179(b)(2); 1910.261 (a)(3)(xii), (c)(2)(v), and (c)(8) (i) and (iv).

(20) ANSI B30.5–68 Safety Code for Crawler, Locomotive, and Truck Cranes, IBR approved for §§ 1910.180(b)(2) and 1910.261(a)(3)(xiii).

(21) ANSI B30.6–69 Safety Code for Derricks, IBR approved for §§ 1910.181(b)(2) and 1910.268(j)(4)(iv) (E) and (H).

(22) ANSI B31.1–55 Code for Pressure Piping, IBR approved for § 1910.261(g)(18)(iii).

(23) ANSI B31.1–67, IBR approved for § 1910.253(d)(1)(i)(A)

(24) ANSI B31.1a–63 Addenda to ANSI B31.1 (1955), IBR approved for § 1910.261(g)(18)(iii).

(25) ANSI B31.1–67 and Addenda B31.1 (1969) Code for Pressure Piping, IBR ap-proved for §§ 1910.103(b)(1)(iii)(b);

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00103 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

1910.104(b)(5)(ii); 1910.218 (d)(4) and (e)(1)(iv); and 1910.261 (a)(3)(xiv) and (g)(18)(iii).

(26) ANSI B31.2–68 Fuel Gas Piping, IBR approved for § 1910.261(g)(18)(iii).

(27) ANSI B31.3–66 Petroleum Refin-ery Piping, IBR approved for § 1910.103(b)(3)(v)(b).

(28) ANSI B31.5–66 Addenda B31.5a (1968) Refrigeration Piping, IB ap-proved for §§ 1910.103(b)(3)(v)(b) and 1910.111(b)(7)(iii).

(29) ANSI B56.1–69 Safety Standard for Powered Industrial Trucks, IBR ap-proved for §§ 1910.178(a) (2) and (3) and

1910.261 (a)(3)(xv), (b)(6), (m)(2), and (m)(5)(iii).

(30) ANSI B57.1–65 Compressed Gas Cylinder Valve Outlet and Inlet Con-nections, IBR approved for § 1910.253(b)(1)(iii).

(31) [Reserved]

(32) ANSI B175.1–1991, Safety Require-ments for Gasoline-Powered Chain Saws 1910.266(e)(2)(i).

(33) ANSI C1–71 National Electrical Code, IBR approved for § 1910.66 appen-dix D (c)(22) (i) and (vii).

(34) ANSI C33.2–56 Safety Standard for Transformer-Type Arc Welding Ma-chines, IBR approved for § 1910.254(b)(1).

(35) [Reserved]

(36) ANSI H23.1–70 Seamless Copper

Water Tube Specification, IBR ap-proved for § 1910.110(b) (8)(ii) and (13)(ii)(b)(1).

(37) ANSI H38.7–69 Specification for Aluminum Alloy Seamless Pipe and Seamless Extruded Tube, IBR approved for § 1910.110(b)(8)(i).

(38) ANSI J6.4–71 Standard Specifica-tion for Rubber Insulating Blankets, IBR approved for § 1910.268 (f)(1) and (n)(11)(v).

(39) ANSI J6.6–71 Standard Specifica-tion for Rubber Insulating Gloves, IBR approved for § 1910.268 (f)(1) and (n)(11)(iv).

(40) ANSI K13.1–67 Identification of Gas Mask Canisters, IBR approved for § 1910.261 (a)(3)(xvi) and (h)(2)(iii).

(41) ANSI K61.1–60 Safety Require-ments for the Storage and Handling of Anhydrous Ammonia, IBR approved for § 1910.111(b)(11)(i).

(42) ANSI K61.1–66 Safety Require-ments for the Storage and Handling of Anhydrous Ammonia, IBR approved for § 1910.111(b)(11)(i).

(43) ANSI O1.1–54 (R 61) Safety Code for Woodworking Machinery, IBR ap-proved for § 1910.261 (a)(3)(xvii), (e)(7), and (i)(2).

(44) ANSI S1.4–71 (R 76) Specification for Sound Level Meters, IBR approved for § 1910.95 appendixes D and I.

(45) ANSI S1.11–71 (R 76) Specification for Octave, Half-Octave and Third-Oc-tave Band Filter Sets, IBR approved for § 1910.95 appendix D.

(46) ANSI S3.6–69 Specifications for Audiometers, IBR approved for § 1910.95(h)(2) and (5)(ii) and appendix D.

(47) ANSI Z4.1–68 Requirements for Sanitation in Places of Employment, IBR approved for § 1910.261 (a)(3)(xviii) and (g)(15)(vi).

(48) [Reserved]

(49) ANSI Z9.1–51 Safety Code for

Ventilation and Operation of Open Sur-face Tanks, IBR approved for §§ 1910.94(c)(5)(iii)(e) and 1910.261 (a)(3)(xix), (g)(18)(v), and (h)(2)(i).

(50) ANSI Z9.1–71 Practices for Ven-tilation and Operation of Open-Surface Tanks, IBR approved for § 1910.124(b)(4)(iv).

(51) ANSI Z9.2–60 Fundamentals Gov-erning the Design and Operation of Local Exhaust Systems, IBR approved for §§ 1910.94(a)(4)(i) introductory text, (a)(6) introductory text, (b)(3)(ix), (b)(4)(i) and (ii), (c)(3)(i) introductory text, (c)(5)(iii)(b), and (c)(7)(iv)(a);

1910.261(a)(3)(xx), (g)(1)(i) and (iii), and (h)(2)(ii).

(52) ANSI Z9.2–79 Fundamentals Gov-erning the Design and Operation of Local Exhaust Systems, IBR approved for § 1910.124(b)(4)(i).

(53) ANSI Z12.12–68 Standard for the Prevention of Sulfur Fires and Explo-sions, IBR approved for § 1910.261 (a)(3)(xxi), (d)(1)(i), (f)(2)(iv), and (g)(1)(i).

(54) ANSI Z12.20–62 (R 69) Code for the Prevention of Dust Explosions in Woodworking and Wood Flour Manu-facturing Plants, IBR approved for § 1910.265(c)(20)(i).

(55) ANSI Z21.30–64 Requirements for Gas Appliances and Gas Piping Instal-lations, IBR approved for § 1910.265(c)(15).

(56) ANSI Z24.22–57 Method of Meas-urement of Real-Ear Attenuation of Ear Protectors at Threshold, IBR ap-proved for § 1910.261(a)(3)(xxii).

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00104 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

(57) ANSI Z33.1–61 Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Con-veying, IBR approved for §§ 1910.94(a)(4)(i); 1910.261 (a)(3)(xxiii) and (f)(5); and 1910.265(c)(20)(i).

(58) ANSI Z33.1–66 Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Con-veying, IBR approved for § 1910.94(a)(2)(ii).

(59) ANSI Z35.1–68 Specifications for Accident Prevention Signs, IBR ap-proved for § 1910.261 (a)(3)(xxiv) and (c)(16).

(60) ANSI Z41.1–67 Men’s Safety Toe Footwear, IBR approved for §§ 1910.94(a)(5)(v); 1910.136(b)(2) and 1910.261(i)(4).

(61) ANSI Z41–91, Personal Protec-tion-Protective Footwear, IBR ap-proved for § 1910.136(b)(1).

(62) ANSI Z48.1–54 Method for Mark-ing Portable Compressed Gas Con-tainers to Identify the Material Con-tained, IBR approved for §§ 1910.103(b)(1)(i)(c); 1910.110(b)(5)(iii);

and 1910.253(b)(1)(ii).

(63) ANSI Z48.1–54 (R 70) Method for Marking Portable Compressed Gas Con-tainers To Identify the Material Con-tained, IBR approved for §§ 1910.111(e)(1) and 1910.134(d)(4).

(64) ANSI Z49.1–67 Safety in Welding and Cutting, IBR approved for § 1910.252(c)(1)(iv) (A) and (B).

(65) ANSI Z53.1–67 Safety Color Code for Marking Physical Hazards and the Identification of Certain Equipment, IBR approved for §§ 1910.97(a)(3)(ii);

1910.145(d) (2), (4), and (6).

(66) ANSI Z54.1–63 Safety Standard for Non-Medical X-Ray and Sealed Gamma Ray Sources, IBR approved for § 1910.252(d) (1)(vii) and (2)(ii).

(67) ANSI Z87.1–68 Practice of Occu-pational and Educational Eye and Face Protection, IBR approved for §§ 1910.133(b)(2); 1910.252(b)(2)(ii)(I); and

1910.261 (a)(3)(xxv), (d)(1)(ii), (f)(5), (g)(10), (g)(15)(v), (g)(18)(ii), and (i)(4).

(68) ANSI Z87.1–89, Practice for Occu-pational and Educational Eye and Face Protection, IBR approved for § 1910.133(b)(1).

(69) ANSI Z88.2–69 Practices for Res-piratory Protection, IBR approved for §§ 1910.94(c)(6)(iii)(a); 1910.134(c); and

1910.261 (a)(3)(xxvi), (b)(2), (f)(5), (g)(15)(v), (h)(2) (iii) and (iv), and (i)(4).

(70) ANSI Z89.1–69 Safety Require-ments for Industrial Head Protection, IBR approved for §§ 1910.135(b)(2); and

1910.261 (a)(3)(xxvii), (b)(2), (g)(15)(v), and (i)(4).

(71) ANSI Z89.1–86, Protective Headwear for Industrial Workers Re-quirements, IBR approved for § 1910.135(b)(1).

(72) ANSI Z89.2–71 Safety Require-ments for Industrial Protective Hel-mets for Electrical Workers, Class B, IBR approved for § 1910.268(i)(1).

(f) The following material is avail-able for purchase from the American Petroleum Institute (API), 1220 L Street NW, Washington DC 20005:

(1) [Reserved]

(2) API 12B (May 1958) Specification for Bolted Production Tanks, 11th Ed., With Supplement No. 1, Mar. 1962, IBR approved for § 1910.106(b)(1)(i)(a)(3).

(3) API 12D (Aug. 1957) Specification for Large Welded Production Tanks, 7th Ed., IBR approved for § 1910.106(b)(1)(i)(a)(3).

(4) API 12F (Mar. 1961) Specification for Small Welded Production Tanks, 5th Ed., IBR approved for § 1910.106(b)(1)(i)(a)(3).

(5) API 620, Fourth Ed. (1970) Includ-ing appendix R, Recommended Rules for Design and Construction of Large Welded Low Pressure Storage Tanks, IBR approved for §§ 1910.103(c)(1)(i)(a);

1910.106(b)(1)(iv)(b)(1); and 1910.111(d)(1)

(ii) and (iii).

(6) API 650 (1966) Welded Steel Tanks for Oil Storage, 3rd Ed., IBR approved for § 1910.106(b)(1)(iii)(a)(2).

(7) API 1104 (1968) Standard for Weld-ing Pipelines and Related Facilities, IBR approved for § 1910.252(d)(1)(v).

(8) API 2000 (1968) Venting Atmos-pheric and Low Pressure Storage Tanks, IBR approved for § 1910.106(b)(2)(iv)(b)(1).

(9) API 2201 (1963) Welding or Hot Tapping on Equipment Containing Flammables, IBR approved for § 1910.252(d)(1)(vi).

(g) The following material is avail-able for purchase from the American Society of Mechanical Engineers (ASME), United Engineering Center, 345 East 47th Street, New York, NY 10017:

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00105 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

(1) ASME Boiler and Pressure Vessel Code, Sec. VIII, 1949, 1950, 1952, 1956, 1959, and 1962 Ed., IBR approved for §§ 1910.110 (b)(10)(iii) (Table H–26), (d)(2) (Table H–31); (e)(3)(i) (Table H–32), (h)(2) (Table H–34); and 1910.111(b)(2)(vi);

(2) ASME Code for Pressure Vessels, 1968 Ed., IBR approved for §§ 1910.106(i)(3)(i); 1910.110(g)(2)(iii)(b)(2);

and 1910.217(b)(12);

(3) ASME Boiler and Pressure Vessel Code, Sec. VIII, 1968, IBR approved for §§ 1910.103; 1910.104(b)(4)(ii); 1910.106 (b)(1)(iv)(b)(2) and (i)(3)(ii); 1910.107;

1910.110(b)(11) (i)(b) and (iii)(a)(1);

1910.111(b)(2) (i), (ii), and (iv); and 1910.169(a)(2) (i) and (ii);

(4) ASME Boiler and Pressure Vessel Code, Sec. VIII, Paragraph UG–84, 1968, IBR approved for § 1910.104 (b)(4)(ii) and (b)(5)(iii);

(5) ASME Boiler and Pressure Vessel Code, Sec. VIII, Unfired Pressure Ves-sels, Including Addenda (1969), IBR ap-proved for §§ 1910.261; 1910.262;

1910.263(i)(24)(ii);

(6) Code for Unfired Pressure Vessels for Petroleum Liquids and Gases of the API and the ASME, 1951 Ed., IBR ap-proved for § 1910.110(b)(3)(iii); and

(7) ASME B56.6–1992 (with addenda), Safety Standard for Rough Terrain Forklift Trucks, IBR approved for § 1910.266(f)(4).

(h) The following material is avail-able for purchase from the American Society for Testing and Materials (ASTM), 1916 Race Street, Philadel-phia, PA 19103:

(1) ASTM A 47–68 Malleable Iron Castings, IBR approved for § 1910.111(b)(7)(vi).

(2) ASTM A 53–69 Welded and Seam-less Steel Pipe, IBR approved for §§ 1910.110(b)(8)(i) (a) and (b) and 1910.111(b)(7)(iv).

(3) ASTM A 126–66 Gray Iron Casting for Valves, Flanges and Pipe Fitting, IBR approved for § 1910.111(b)(7)(vi).

(4) ASTM A 391–65 (ANSI G61.1–1968)

Alloy Steel Chain, IBR approved for § 1910.184(e)(4).

(5) ASTM A 395–68 Ductile Iron for Use at Elevated Temperatures, IBR ap-proved for § 1910.111(b)(7)(vi).

(6) ASTM B 88–69 Seamless Copper Water Tube, IBR approved for § 1910.110(b) (8)(i)(a) and (13)(ii)(b)(1).

(7) ASTM B 88–66A Seamless Copper Water Tube, IBR approved for § 1910.252(d)(1)(i)(A)(2).

(8) ASTM B 117–64 Salt Spray (Fog) Test, IBR approved for § 1910.268(g)(2)(i)(A).

(9) ASTM B 210–68 Aluminum-Alloy Drawn Seamless Tubes, IBR approved for § 1910.110(b)(8)(ii).

(10) ASTM B 241–69, IBR approved for § 1910.110(b)(8)(i) introductory text.

(11) ASTM D 5–65 Test for Penetra-tion by Bituminous Materials, IBR ap-proved for § 1910.106(a)(17).

(12) ASTM D 56–70 Test for Flash Point by Tag Closed Tester, IBR ap-proved for § 1910.106(a)(14)(i).

(13) ASTM D 86–62 Test for Distilla-tion of Petroleum Products, IBR ap-proved for §§ 1910.106(a)(5) and 1910.119(b) ‘‘Boiling point.’’

(14) ASTM D 88–56 Test for Saybolt Viscosity, IBR approved for § 1910.106(a)(37).

(15) ASTM D 93–71 Test for Flash Point by Pensky Martens, IBR ap-proved for § 1910.106(a)(14)(ii).

(16) ASTM D 323–68, IBR approved for § 1910.106(a)(30)

(17) ASTM D 445–65 Test for Viscosity of Transparent and Opaque Liquids, IBR approved for § 1910.106(a)(37).

(18) ASTM D 1692–68 Test for Flam-mability of Plastic Sheeting and Cel-lular Plastics, IBR approved for § 1910.103(c)(1)(v)(d).

(19) ASTM D 2161–66 Conversion Ta-bles For SUS, IBR approved for § 1910.106(a)(37).

(i) The following material is avail-able for purchase from the American Welding Society (AWS), 550 NW, LeJeune Road, P.O. Box 351040, Miami

FL 33135:

(1) AWS A3.0 (1969) Terms and Defini-tions, IBR approved for § 1910.251(c).

(2) [Reserved]

(3) AWS B3.0–41 Standard Qualifica-tion Procedure, IBR approved for § 1910.67(c)(5)(i).

(4) AWS D1.0–1966 Code for Welding in Building Construction, IBR approved for § 1910.27(b)(6).

(5) AWS D2.0–69 Specifications for Welding Highway and Railway Bridges, IBR approved for § 1910.67(c)(5)(iv).

(6) AWS D8.4–61 Recommended Prac-tices for Automotive Welding Design, IBR approved for § 1910.67(c)(5)(ii).

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00106 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

(7) AWS D10.9–69 Standard Qualifica-tion of Welding Procedures and Weld-ers for Piping and Tubing, IBR ap-proved for § 1910.67(c)(5)(iii).

(j) The following material is avail-able for purchase from the Department of Commerce:

(1) Commercial Standard, CS 202–56 (1961) ‘‘Industrial Lifts and Hinged Loading Ramps,’’ IBR approved for § 1910.30(a)(3).

(2) Publication ‘‘Model Performance Criteria for Structural Fire Fighters’ Helmets,’’ IBR approved for § 1910.156(e)(5)(i).

(k) The following material is avail-able for purchase from the Compressed Gas Association (CGA), 1235 Jefferson Davis Highway, Arlington, VA 22202:

(1) CGA C–6 (1968) Standards for Vis-ual Inspection of Compressed Gas Cyl-inders, IBR approved for § 1910.101(a).

(2) CGA C–8 (1962) Standard for Re-qualification of ICC–3HT Cylinders, IBR approved for § 1910.101(a).

(3) CGA G–1 (1966) Acetylene, IBR ap-proved for § 1910.102(a).

(4) CGA G–1.3 (1959) Acetylene Trans-mission for Chemical Synthesis, IBR approved for § 1910.102(b).

(5) CGA G–1.4 (1966) Standard for Acetylene Cylinder Charging Plants, IBR approved for § 1910.102(b).

(6) CGA G–7.1 (1966) Commodity Spec-ification, IBR approved for § 1910.134(d)(1).

(7) CGA G–8.1 (1964) Standard for the Installation of Nitrous Oxide Systems at Consumer Sites, IBR approved for § 1910.105.

(8) CGA P–1 (1965) Safe Handling of Compressed Gases, IBR approved for § 1910.101(b).

(9) CGA P–3 (1963) Specifications, Properties, and Recommendations for Packaging, Transportation, Storage and Use of Ammonium Nitrate, IBR ap-proved for § 1910.109(i)(1)(ii)(b).

(10) CGA S–1.1 (1963) and 1965 Ad-denda. Safety Release Device Stand-ards—Cylinders for Compressed Gases, IBR approved for §§ 1910.101(c);

1910.103(c)(1)(iv)(a)(2).

(11) CGA S–1.2 (1963) Safety Release Device Standards, Cargo and Portable Tanks for Compressed Gases, IBR ap-proved for §§ 1910.101(c);

1910.103(c)(1)(iv)(a)(2).

(12) CGA S–1.3 (1959) Safety Release Device Standards-Compressed Gas Storage Containers, IBR approved for §§ 1910.103(c)(1)(iv)(a)(2);

1910.104(b)(6)(iii); and 1910.111(d)(4)(ii)(b).

(13) CGA 1957 Standard Hose Connec-tion Standard, IBR approved for § 1910.253(e) (4)(v) and (5)(iii).

(14) CGA and RMA (Rubber Manufac-turer’s Association) Specification for Rubber Welding Hose (1958), IBR ap-proved for § 1910.253(e)(5)(i).

(15) CGA 1958 Regulator Connection Standard, IBR approved for § 1910.253(e) (4)(iv) and (6).

(l) The following material is avail-able for purchase from the Crane Man-ufacturer’s Association of America, Inc. (CMAA), 1 Thomas Circle NW, Washington DC 20005:

(1) CMAA Specification 1B61, Speci-fications for Electric Overhead Trav-eling Cranes, IBR approved for § 1910.179(b)(6)(i).

(2) [Reserved]

(m) The following material is avail-able for purchase from the General Services Administration:

(1) GSA Pub. GG-B–0067b, Air Com-pressed for Breathing Purposes, or In-terim Federal Specifications, Apr. 1965, IBR approved for § 1910.134(d)(4).

(2) [Reserved]

(n) The following material is avail-able for purchase from the Department of Health and Human Services:

(1) Publication No. 76–120 (1975), List of Personal Hearing Protectors and At-tenuation Data, IBR approved for § 1910.95 App. B.

(2) [Reserved]

(o) The following material is avail-able for purchase from the Institute of Makers of Explosives (IME), 420 Lex-ington Avenue, New York, NY 10017:

(1) IME Pamphlet No. 17, 1960, Safety in the Handling and Use of Explosives, IBR approved for §§ 1910.261 (a)(4)(iii) and (c)(14)(ii).

(2) [Reserved]

(p) The following material is avail-able for purchase from the National Electrical Manufacturer’s Association

(NEMA):

(1) NEMA EW–1 (1962) Requirements for Electric Arc Welding Apparatus, IBR approved for §§ 1910.254(b)(1).

(2) [Reserved]

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00107 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

(q) The following material is avail-able for purchase from the National Fire Protection Association (NFPA), 11 Tracy Drive, Avon, MA 02322:

(1) NFPA 30 (1969) Flammable and Combustible Liquids Code, IBR ap-proved for § 1910.178(f)(1).

(2) NFPA 32–1970 Standard for Dry Cleaning Plants, IBR approved for § 1910.106(j)(6)(i).

(3) NFPA 33–1969 Standard for Spray Finishing Using Flammable and Com-bustible Material, IBR approved for §§ 1910.94(c) (1)(ii), (2), (3) (i) and (iii), and (5).

(4) NFPA 34–1966 Standard for Dip Tanks Containing Flammable or Com-bustible Liquids, IBR approved for § 1910.124(b)(4)(iv).

(5) NFPA 34–1995 Standard for Dip Tanks Containing Flammable or Com-bustible Liquids, IBR approved for § 1910.124(b)(4)(ii).

(6) NFPA 35–1970 Standard for the Manufacture of Organic Coatings, IBR approved for § 1910.106(j)(6)(ii).

(7) NFPA 36–1967 Standard for Sol-vent Extraction Plants, IBR approved for § 1910.106(j)(6)(iii).

(8) NFPA 37–1970 Standard for the In-stallation and Use of Stationary Com-bustion Engines and Gas Turbines, IBR approved for §§ 1910.106(j)(6)(iv) and

1910.110 (b)(20)(iv)(c) and (e)(11).

(9) NFPA 51B–1962 Standard for Fire Protection in Use of Cutting and Weld-ing Processes, IBR approved for § 1910.252(a)(1) introductory text.

(10) NFPA 54–1969 Standard for the Installation of Gas Appliances and Gas Piping, IBR approved for § 1910.110(b)(20)(iv)(a).

(11) NFPA 54A–1969 Standard for the Installation of Gas Piping and Gas Equipment on Industrial Premises and Certain Other Premises, IBR approved for § 1910.110(b)(20)(iv)(b).

(12) NFPA 58–1969 Standard for the Storage and Handling of Liquefied Pe-troleum Gases (ANSI Z106.1–1970), IBR approved for §§ 1910.110 (b)(3)(iv) and (i)(3) (i) and (ii); and 1910.178(f)(2).

(13) NFPA 59–1968 Standard for the Storage and Handling of Liquefied Pe-troleum Gases at Utility Gas Plants, IBR approved for §§ 1910.110 (b)(3)(iv) and (i)(2)(iv).

(14) NFPA 62–1967 Standard for the Prevention of Dust Explosions in the

Production, Packaging, and Handling of Pulverized Sugar and Cocoa, IBR ap-proved for § 1910.263(k)(2)(i).

(15) NFPA 68–1954 Guide for Explosion Venting, IBR approved for § 1910.94(a)(2)(iii).

(16) NFPA 70–1971 National Electrical Code, IBR approved for § 1910.66 App.

D(c)(2).

(17) NFPA 78–1968 Lightning Protec-tion Code, IBR approved for § 1910.109(i)(6)(ii).

(18) NFPA 80–1968 Standard for Fire Doors and Windows, IBR approved for § 1910.106(d)(4)(i).

(19) NFPA 80–1970 Standard for the Installation of Fire Doors and Win-dows, IBR approved for § 1910.253(f)(6)(i)(I).

(20) NFPA 86A–1969 Standard for Oven and Furnaces Design, Location and Equipment, IBR approved for §§ 1910.107 (j)(1) and (l)(3) and 1910.108 (b)(2) and (d)(2).

(21) NFPA 91–1961 Standard for the Installation of Blower and Exhaust Systems for Dust, Stock, and Vapor Removal or Conveying (ANSI Z33.1–61), IBR approved for § 1910.107(d)(1).

(22) NFPA 91–1969 Standards for Blower and Exhaust Systems, IBR ap-proved for § 1910.108(b)(1).

(23) NFPA 96–1970 Standard for the Installation of Equipment for the Re-moval of Smoke and Grease Laden Va-pors from Commercial Cooking Equip-ment, IBR approved for § 1910.110(b)(20)(iv)(d).

(24) NFPA 101–1970 Code for Life Safe-ty From Fire in Buildings and Struc-tures, IBR approved for § 1910.261(a)(4)(ii).

(25) NFPA 203M–1970 Manual on Roof Coverings, IBR approved for § 1910.109(i)(1)(iii)(c).

(26) NFPA 251–1969 Standard Methods of Fire Tests of Building Construction and Materials, IBR approved for §§ 1910.106 (d)(3)(ii) introductory text and (d)(4)(i).

(27) NFPA 302–1968 Fire Protection Standard for Motor-Craft (Pleasure and Commercial), IBR approved for § 1910.265(d)(2)(iv) introductory text.

(28) NFPA 385–1966 Recommended Regulatory Standard for Tank Vehicles for Flammable and Combustible Liq-uids, IBR approved for § 1910.106(g)(1)(i)(e)(1).

VerDate Aug<31>2005 08:47 Jul 26, 2007 Jkt 211112 PO 00000 Frm 00108 Fmt 8010 Sfmt 8010 Y:\SGML\211112.XXX 211112rf re de ric k on

P R

O D

1P C w ith C

(29) NFPA 496–1967 Standard for Purged Enclosures for Electrical Equipment in Hazardous Locations, IBR approved for § 1910.103(c)(1)(ix)(e)(1).

(30) NFPA 505–1969 Standard for Type Designations, Areas of Use, Maintenence, and Operation of Pow-ered Industrial Trucks, IBR approved for § 1910.110(e)(2)(iv).

(31) NFPA 566–1965 Standard for the Installation of Bulk Oxygen Systems at Consumer Sites, IBR approved for §§ 1910.253 (b)(4)(iv) and (c)(2)(v).

(32) NFPA 656–1959 Code for the Pre-vention of Dust Ignition in Spice Grinding Plants, IBR approved for § 1910.263(k)(2)(i).

(33) NFPA 1971–1975 Protective Cloth-ing for Structural Fire Fighting, IBR approved for § 1910.156(e)(3)(ii) introduc-tory text.

(r) The following material is avail-able for purchase from the National Food Plant Institute, 1700 K St. NW., Washington, DC 20006:

(1) Definition and Test Procedures for Ammonium Nitrate Fertilizer (Nov.

1964), IBR approved for § 1910.109 Table H–22, ftn. 3.

(2) [Reserved]

(s) The following material is avail-able for purchase from the National In-stitute for Occupational Safety and Health (NIOSH):

(1) Registry of Toxic Effects of Chem-ical Substances, 1978, IBR approved for § 1910.20(c)(13)(i) and appendix B.

(2) Development of Criteria for Fire Fighters Gloves; Vol. II, Part II; Test Methods, 1976, IBR approved for § 1910.156(e)(4)(i) introductory text.

(3) NIOSH Recommendations for Oc-cupational Safety and Health Stand-ards (Sept. 1987), IBR approved for § 1910.120 PEL definition.

(t) The following material is avail-able for purchase from the Public Health Service:

(1) U.S. Pharmacopeia, IBR approved for § 1910.134(d)(1).

(2) Publication No. 934 (1962), Food Service Sanitation Ordinance and Code, Part V of the Food Service Sani-tation Manual, IBR approved for § 1910.142(i)(1).

(u) The following material is avail-able for purchase from the Society of

Automotive Engineers (SAE), 485 Lex-ington Avenue, New York, NY 10017:

(1) SAE J185, June 1988, Rec-ommended Practice for Access Systems for Off-Road Machines, IBR approved for § 1910.266(f)(5)(i).

(2) SAE J231, January 1981, Minimum Performance Criteria for Falling Ob-ject Protective Structure (FOPS), IBR approved for § 1910.266(f)(3)(ii).

(3) SAE J386, June 1985, Operator Re-straint Systems for Off-Road Work Ma-chines, IBR approved for § 1910.266(d)(3)(iv).

(4) SAE J397, April 1988, Deflection Limiting Volume-ROPS/FOPS Labora-tory Evaluation, IBR approved for § 1910.266(f)(3)(iv).

(5)…