CDRL A003 Product Dwgs.doc

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item) Form Approved

CMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 222202-2302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for the Contract. PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

FORMTEXT

B. EXHIBIT

C. CATEGORY

TDP _X_

TM

OTHER

D. SYSTEM/ITEM.

FOSOV System Technical Support (STS)

E. CONTRACT/PR NO.

F. CONTRACTOR

1. DATA ITEM NO.

A003

2. TITLE OF DATA ITEM

PRODUCT DRAWINGS / MODELS AND ASSOCIATED LISTS

3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.)

DI-SESS-81000C

5. CONTRACT REFERENCE

C.2.11.1, C6.2, C.11.4.1

6. REQUIRING OFFICE

SOAL-SW, PM-FOSOV

7. DD 250 REQ

LT

9. DIST STATEMENT REQUIRED

D

10. FREQUENCY

AS REQUIRED

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

8. APP CODE

A

11. AS OF DATE

N/A

13. DATE OF SUBSEQUENT SUBMISSION

SEE BLKS 10 & 16

16 REMARKS

BLK 8 - Government approval/disapproval turn-around time is 30 days after receipt. Contractor correction response and resubmit time is 30 days after Government notification. Technical Inspection and Acceptance shall be IAW MIL-DTL-31000C, Section 4. Verification.

BLK 9 – Required markings: Technical Distribution Statement D, Export Control Warning, Government Part Number and CAGE, and Government approved Contractor Rights-in-Data (if applicable) shall be applied to engineering drawings, models, and associated documentation IAW ASME Y14.100, Y14.24, Y14.35, Y14.41, DoDD 5230.24 and 5230.25. The Contractor’s name and the contract number shall be identified on all documents. Apply on all delivered models, sheets of drawings, associated documents, packaging instructions, lists, and other technical data:

DISTRIBUTION STATEMENT D: DISTRIBUTION IS AUTHORIZED TO THE DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY. REASON: (ADMINISTRATIVE OR OPERATIONAL USE). DATE OF DETERMINATION: (31 JUL 08). OTHER REQUESTS SHALL BE REFERRED TO THE SPECIAL OPERATIONS COMMAND, PROGRAM MANAGER, FAMILY OF SPECIAL OPERATIONS VEHICLES, PM-FOSOV, PROJECT OFFICE, ATTN: SOAL-SW, PM-FOSOV, TAMPA, FLORIDA, 33621-5223.

EXPORT CONTROL WARNING. WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET. SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED, TITLE 50, U.S.C., APP. 2401 ET. SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.

BLK 12/13/14 – Submit for drawing/model product data set approval 7 days after receipt of Government approval of associated ECP (engineering change proposal). Submit approved product data IAW ERR CDRL A007.

BLK 13 – Transfer master files at end of contract IAW CDRL A008.

BLK 14b – Email Addresses:

SOFSA

Mike.doroha.ctr@SOFSA.mil SOAL-SW, PM-FOSOV Michael.ellis1@socom.mil

AMSRD-TAR-E

mark.fox@us.army.mil Distribution shall also include any others specified in the work directive.

BLK 14 –

SOW Para C.2.7: Convert non-digital reproduction copies of legacy Family of Special Operation Vehicles (FOSOV) technical and engineering product data into 1:1 digital PDF vector image documents. Reduced sizes are prohibited. Data shall conform to MIL-PRF-5480G requirements. When requested by the COTR, deliver technical and engineering product data in electronic format. This includes data on a CD, DVD, or electronic file sent by email. Deliver data via U.S. Mail to TACOM, ATTN: AMSRD-TAR-E (John Kane), 6501 E. 11 Mile, Warren, MI 48397-5000.

SOFSA

PM-FOSOV

AMSRD-TAR-E

15. TOTAL

G. PREPARED BY

John Kane

H. DATE

24 FEB 09

I. APPROVED BY

J. DATE

DD FORM 1423-1, FEB 2001

PREVIOUS EDITIONS ARE OBSOLETE

Page of Pages

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A. CONTRACT LINE ITEM NO.

DATA ITEM NO. A003 (Cont’d) FORMTEXT

B. EXHIBIT

A

C. CATEGORY

TDP X

TM

OTHER

D. SYSTEM/ITEM.

FOSOV System Technical Support (STS)

E. CONTRACT/PR NO.

F. CONTRACTOR

16 REMARKS (Continued) SOW Para C.2.13.3: Email data to PDM Team (SOAL-SW, PM-FOSOV; AMSRD-TAR-E) within 7 days of request.

BLK 16 – SEE ATTACHED TDP Worksheets for Product Drawings and Solid Models, and the Product Drawings /Associated List Tailoring Checklist.

* Letter of Transmittal only

DD FORM 1423-1, FEB 2001

PREVIOUS EDITIONS ARE OBSOLETE

Page of Pages