(Reference Only) Attachment 3 Section M Evaluation Criteria_25 Oct 26.docx

DOCX document 48 KB Posted

Attached to
Tinker AFB 2026 Multiple Award Construction Contract (MACC)
Solicitation number
FA8137-26-R-0040
Issued by

About this file

This is a Section M Evaluation Criteria document for a Highest Technically Rated Offeror (HTRO) Multiple Award Construction Contract (MACC) Indefinite Delivery Indefinite Quantity (IDIQ) solicitation for Tinker Air Force Base. The Air Force Sustainment Center is seeking qualified contractors for a broad range of sustainment, maintenance, repair, alteration/renovation, and minor construction projects at the facility. The IDIQ has a ceiling of $950 million with a base 5-year ordering period and one optional 5-year ordering period. The minimum guaranteed task order is $500.00, representing only the post-award conference effort, and contractors are not guaranteed additional work beyond this amount.

The evaluation utilizes a self-rated scoring validation methodology where offerors must achieve or exceed the Minimum Technical Threshold Rating (MTTR) of 8,190 points for Appendix C and 7,140 points for Appendix D to be deemed acceptable for award. Technical Experience is the sole evaluation factor across four sections: Relevant Construction Experience (Categories 1-4), Design Experience (Category 5), Certifications/Licenses (Category 6), and Staffing (Category 7). Two separate competitive pools exist—Small Business Pool and Full and Open Pool—with differing project value thresholds; Small Business projects range from $1 million to over $5 million while Full and Open projects must exceed $10 million. Evaluation criteria assess prime contractor experience on multi-trade construction projects, Department of Defense/Department of War projects, parallel project execution, specialized construction, design-build capabilities, professional certifications (PMP, LEED, Safety, Quality), and key personnel including laborers, architects/engineers, program managers, safety officers, quality control managers, and superintendents. The Government reserves the right to evaluate proposals and award without negotiations but may conduct discussions if determined necessary in the Government's best interest. Offerors must submit substantiated claims for all technical experience categories or risk Government downward adjustment of scores, potentially to zero points.

View the file

Other files

File Type Posted
Solicitation Amendment - FA813726R00400008.pdf PDF
Solicitation Amendment FA813726R00400008 SF 30.pdf PDF
01 35 26_25 Oct 26.pdf PDF
Follow up Questions and Answers 3 Nov 2026.xlsx XLSX spreadsheet
Attachment_2e_Appendix_E_MACC_SBCross_Reference_Matrix_05 Nov 26.xlsx XLSX spreadsheet
(Reference Only) Attachment_2c_Appendix_C_MACC_SBSelf_Scoring_Matrix_25 Oct 26.xlsx XLSX spreadsheet
Attachment_2c_Appendix_C_MACC_SBSelf_Scoring_Matrix_05 Nov 26.xlsx XLSX spreadsheet
(Reference Only) Attachment_2e_Appendix_E_MACC_SBCross_Reference_Matrix_25 Oct 26.xlsx XLSX spreadsheet
MACC Summary of Changes October 2026.docx DOCX document
Attachment_2f_Appendix_F_MACC_FOCross_Reference_Matrix_05 Nov 26.xlsx XLSX spreadsheet
(Reference Only) Attachment_2d_Appendix_D_MACC_FOSelf_Scoring_Matrix_25 Oct 26.xlsx XLSX spreadsheet
(Reference Only) Attachment 2 Section L Instructions to Offerors_25 Oct 26.docx DOCX document
(Reference Only) Attachment 1 Statement of Work r4_25 Oct 26.docx DOCX document
Attachment_2d_Appendix_D_MACC_FOSelf_Scoring_Matrix_10 Nov 26.xlsx XLSX spreadsheet
01 45 00_25 Oct 26.pdf PDF
Solicitation Amendment - FA813726R00400007.pdf PDF
Attachment 1 Statement of Work 5_Nov_26.pdf PDF
Solicitation Amendment FA813726R00400007 SF 30.pdf PDF
Attachment 2 Section L Instructions to Offerors_10 Nov 26.pdf PDF
(Reference Only) Attachment_2f_Appendix_F_MACC_FOCross_Reference_Matrix_25 Oct 26.xlsx XLSX spreadsheet
Attachment 3 Section M Evaluation Criteria_10 Nov 26.pdf PDF
Solicitation Amendment FA813726R0040006 SF30.pdf PDF
Solicitation Amendment FA813726R0040005.pdf PDF
Solicitation Amendment FA813726R0040005 SF30.pdf PDF
Solicitation Amendment FA813726R0040006.pdf PDF
Solicitation Amendment FA813726R0040004 SF30.pdf PDF
Solicitation Amendment FA813726R0040004.pdf PDF
Solicitation Amendment FA813726R00400006 SF 30.pdf PDF
Solicitation Amendment - FA813726R00400006.pdf PDF
Solicitation Amendment FA813726R00400005 SF 30.pdf PDF
Solicitation Amendment - FA813726R00400005.pdf PDF
Solicitation Amendment FA813726R00400004 SF 30.pdf PDF
Solicitation Amendment - FA813726R00400004.pdf PDF
Questions and Answers 16 Sep 2026.xlsx XLSX spreadsheet
Solicitation Amendment FA813726R00400001 SF 30.pdf PDF
Solicitation FA813726R0040.pdf PDF
Solicitation Amendment FA813726R00400002 SF 30.pdf PDF
Solicitation Amendment - FA813726R00400002.pdf PDF
Solicitation Amendment - FA813726R00400001.pdf PDF
Solicitation Amendment - FA813726R00400003.pdf PDF
Solicitation Amendment FA813726R00400003 SF 30.pdf PDF
FA813726R0040 Questions and Answers CAO 25 Aug 2026.xlsx XLSX spreadsheet
Attachment_2__Section_L 18 Aug 26.pdf PDF
Solicitation Amendment FA813726R00400002 SF 30.pdf PDF
Solicitation Amendment - FA813726R00400002.pdf PDF
Attachment_2__Section_L 5 Aug 26.pdf PDF
Solicitation Amendment - FA813726R00400001.pdf PDF
Solicitation Amendment FA813726R00400001 SF 30.pdf PDF
dodio-2000.16v1_afi10-245-o.pdf PDF
003 CDRL - TO Progress Mtg Signed.pdf PDF
Show 40 more

Latest 50 of 79 listed here. See the rest on GovTribe.

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

SECTION M

EVALUATION CRITERIA

FOR

MULTIPLE AWARD CONSTRUCTION CONTRACT (MACC)

REQUEST FOR PROPOSAL FA8137-26-R-0040

AIR FORCE SUSTAINMENT CENTER

25 October 2026

FA8137-26-R-0040

Section M Instructions to Offerors

GENERAL INFORMATION

Basis of Contract Award. This is a Highest Technically Rated Offeror (HTRO) source selection conducted in accordance with the DoD Source Selection Procedures and the Revolutionary FAR Overhaul (RFO) 15.2 as supplemented. The best value basis for award will be determined by utilizing the Highest Technically Rated Offerors (HTRO) Minimum Technical Threshold Rating (MTTR) approach. Award will be made to those Offerors whose proposals demonstrate Technical Experience within the Government-validated Minimum Technical Threshold Rating (MTTR), whose proposals conform to the solicitation’s requirements, and who have been determined to be responsible in accordance with RFO Part 9.

The Source Selection Authority (SSA) will base the source selection decision on the evaluation criteria as described later in this section. While the Government source selection evaluation team and the SSA will strive for maximum objectivity, the source selection process, by its nature, is subjective; therefore, professional judgement is implicit throughout the entire process.

Number of Contracts to be Awarded. Contracts for the Small Business Pool will be awarded to small businesses that meet or exceed the HTRO MTTR, whose proposals conform to the solicitation’s requirements and who have been determined to be responsible in accordance with RFO Part 9. Contracts for the Full and Open Pool will be awarded to all offerors, whether large or small business, who submitted a proposal for the Full and Open Pool and meet or exceed the HTRO MTTR and whose proposal conforms to the solicitation’s requirements and who have been determined to be responsible in accordance with RFO Part 9.

Period of Performance. The contracts will consist of a base 5-year ordering period and one 5-year optional ordering period.

Indefinite Delivery Indefinite Quantity (IDIQ) Ceiling. The ceiling of the IDIQ is $950M. The total value of all task orders (TOs) awarded under the IDIQ will not exceed this amount.

Minimum Guaranteed Task Order. The minimum guaranteed order is $500.00. This amount represents the effort involved with an in-person post award conference. This is not a requirements contract and any Contractor that is awarded a MACC IDIQ contract is not guaranteed any task order beyond that for the post-award conference.

Proposal Substantiation. An Offeror’s submittal of unsubstantiated and/or misleading claims, for even a single Technical Experience evaluation criterion, could result in the Government determining that the Offeror’s proposed self-rated score is disingenuous and/or artificially inflated. If this were to occur, the Government would unilaterally downward adjust the Offeror’s score, potentially down to zero (0) points.

Negotiations. The Government intends to evaluate proposals and award without negotiations but reserves the right to conduct negotiations if the Government determines discussions to be necessary. Negotiations will be conducted in accordance with RFO 15.204-2.

Competitive Range Determination. If negotiations are conducted, the Government must establish a competitive range comprised of the best suited proposals for further negotiations, in accordance with RFO 15.204-1(a).

Clarifications. The Government reserves the right to conduct clarifications in accordance with RFO 15.202(a)(2)(i-iv).

Negotiations. In accordance with RFO 15.203, the Government intends to evaluate proposals and make award without negotiations. Therefore, it is imperative that Offerors submit their best terms initially. However, if during the evaluation period it is determined to be in the best interest of the Government to hold negotiations, the Government will do so via Evaluation Notices (ENs). Additionally, the Government will determine if responses to ENs received during negotiations will be considered formal proposal revisions, or if offerors will be required to include EN responses in the Final Proposal Revision (FPR). The Request for FPR letter will include specific instructions on how offerors will submit FPRs

PROPOSAL COMPLIANCE AND RESPONSIBILITY

Proposal Compliance. Offerors shall meet all solicitation requirements, such as terms and conditions, technical requirements, representations and certifications, and other instructions identified within the solicitation. Offerors shall comply with content required within each of the proposal volumes and sections. If a proposal fails to conform to any requirements of the solicitation the Offeror may be deemed ineligible for award. Offerors are NOT permitted to take exception to any terms and conditions within the solicitation.

The Government will review each Offeror’s proposal documentation to ensure all required documentation was provided in response to the solicitation. The Government will rely on the documentation provided by the Offeror to facilitate the Contracting Officer’s determination of proposal compliance.

Responsibility. No award shall be made to an Offeror unless the Contracting Officer determines it to be responsible. To be determined responsible, an Offeror shall meet the general standards described in RFO 9.104-1. The Contracting Officer may consider information provided within any volume of the proposal, and other information, not limited to proposal information, when making the determination of responsibility.

Organizational Conflict of Interest (OCI). Conflict of Interest issues are treated in a manner similar to responsibility determinations. An Offeror’s actual or potential OCI concerns must be avoided, mitigates, or neutralized before that Offeror may receive an award of this contract. Please see Section L, Para 3.6 for additional information and submission requirements for actual and/or perceived OCIs.

EVALUATION METHODOLOGY AND FACTORS

Evaluation Methodology. The Government will utilize the HTRO MTTR methodology. This method requires the Offeror to score itself on Volume II: Technical Experience, based on the criteria described in Section L, Instruction to Offerors. The Government will validate scores and evaluate all the requirements mentioned in Section L, including Appendix C and D to Section L, Self- Scoring Matrix, even if not reiterated in this document, Section M, Evaluation Criteria.

The evaluation uses Technical Experience as the evaluation factor. There is no cost/price evaluation for this acquisition at the IDIQ level, and therefore there will be no trade-offs between cost/price and technical. The Government intends to conduct the technical evaluation using a HTRO Self-Rated Scoring Validation methodology where the Offeror’s Government-validated rating must meet or exceed the MTTR to be deemed an acceptable Offer.

Minimum Technical Threshold Rating. The Government has established an MTTR that an Offeror must meet or exceed in order to to be considered acceptable for award. The Government has determined that an Offeror’s Government-validated rating represents its level of demonstrated capability to perform similar work, and those with a high level of demonstrated capability of the categories contained in the Scoring Matrix (Appendix C and D to Section L) present a lower risk of unsuccessful performance to the Government. The Government has set the MTTR at 8,190 points for Appendix C and 7,140 points for Appendix D.

The Government will only validate self-scored matrices at or above the MTTR. The Offeror’s Self-Score is the total of all points claimed for each category. The Government-validated rating is the total of all points that the Government evaluation team validates during their assessment. The Government will validate based on documents contained in the submitted work samples and identified within the Cross Reference Matrix (Appendix E and F to Section L). The Government-validated rating may be lower than the Offeror’s Self-Score if the Government evaluation team is unable to find evidence for the claimed points within the Offeror’s proposal as cited in Appendix E or F.

The Burden of Proof for substantiating points in the HTRO MTTR Self-Rated Scoring Matrix rests with the Offeror. As stated in Section 1.6, the substantiating documentation shall contain sufficient data to validate points claimed in the Offeror’s proposal.

Evaluation Factor. Award will be made to the Offerors proposing the combination of factors deemed most advantageous to the Government based upon an integration assessment of the evaluation factors described below:

Factor: Technical Experience – Small Business Pool Section 1: Relevant Construction Experience (Categories 1-4) Section 2: Design Experience (Category 5) Section 3: Certifications/Licenses (Category 6) Section 4: Staffing (Category 7) Factor: Technical Experience – Full and Open Pool Section 1: Relevant Construction Experience (Categories 1-4) Section 2: Design Experience (Category 5) Section 3: Certifications (Category 6) Section 4: Staffing (Category 7)

EVALUATION METHODOLOGY

TECHNICAL EXPERIENCE SMALL BUSINESS POOL Evaluation Section 1, (Categories 1-4): RELEVANT CONSTRUCTION EXPERIENCE.

Category 1: Commercial, Industrial & Residential Construction, Multi-Trade.

Commercial, Industrial & Residential Construction - Project Value. In this category, the Government will assess the Offerors Technical Experience by validating points assigned to the value number of multiple trade construction projects, where the Offeror was Prime Contractor, within the thresholds betweenwith values in the following ranges:

$1 Million and to $5 Million, and Greater than $5 Million to $10 Million.

Commercial, Industrial & Residential Construction - Number of Trades. In this category, the Government will assess the Offerors Technical Experience by validating points assigned to the number of trades for each of the submitted construction projects.

Category 2: Construction for the Department of Defense (DoD)/Department of War (DoW). In this category, using only projects submitted for Category 1, the Government will assess the Offeror’s Technical Experience by validating points assigned to the number of projects executed as Prime Contractor executed for the Department of War DoD/DoW with a magnitude of over $1 Million.

Category 3: Multiple Construction Multi Trade Projects Executed in Parallel. In this category, using only projects submitted for Category 1, the Government will assess the Offeror’s Technical Experience by validating points assigned for performing multi-trademultiple construction projects with multiple projects performed in parallel, during a period of at least six (6) months. Multiple Trade is defined as having more than one trade within a single project. Execution in parallel is defined as concurrent.

Category 4: Specialized Construction. In this category, using only projects submitted for Category 1, the Government will access the Offeror’s Technical Experience by validating points assigned to Prime Contractor experience in up to one (1) specialized construction projects exceeding $1 Million in each of the following subcategories (up to one per category):

AT/FP Measures, Fire Protection/Suppression Systems Road/Parking/Pavement construction Utility System Construction Roofing Airfield Construction Section 2, Category 5: DESIGN EXPERIENCE Experience as Prime Contractor on Design-Build Projects. In this category, the Government will assess the Offeror’s Technical Experience by validating points assigned to the Offeror’s experience as a Prime Contractor with for a Design-Build projects. It is important for the Government to understand the Offeror’s prior experience and ability to identify problem solving if, and when, unknowns arise in a given construction project.

Design Document Submission. In this category, the Government will assess the Offeror’s Technical Experience by validating points assigned to the design-build project, including completeness of the design across the drawings, specifications, and design analysis/calculations; and compliance with Unified Facilities Criteria (UFC) and the corresponding International Code Council (ICC) model codes and/or standards (i.e. NFPA, ASTM).the Offeror’s compliance with Unified Facilities Guides Specification (UFGS) 01 33 16.00.10, Design Data (Design After Award).

Section 3, Category 6: CERTIFICATIONS Project Management Professional. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the Project Management Professional certification as defined in SOW 3.1.2. Only employees who are currently employed within the Offeror’s own company or that of a teaming subcontractor shall or contingent hires will be evaluated. Expired certification(s) will receive a score of zero.

Certification for Leadership in Energy and Environmental Design (LEED) Professionals. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the LEED Professional certification (Green Associate (GA) or Accredited Professional (AP)). Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated. Expired certification(s) will receive a score of zero.

Certification for Safety Professionals. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to one or more certified Safety Professionals. Certifications must be above and beyond the minimum requirements in Section 7, Staffing, Site Safety and Health Manager. Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Certification for Quality Personnel. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to one or more certified Quality Personnel. Certifications must be above and beyond minimum requirements in Section 7, Staffing, Quality Control Manager. Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Section 4, Category 7: STAFFING Trade/Construction Laborers. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Trade/Construction Laborers. Trade/Construction Laborers are defined as workers whose duties are manual or physical in nature (including those workers who use tools or who are performing the work of a trade), as distinguished from mental or managerial. Only employees who are currently employed within the Offeror’s own company or that of a teaming subcontractor shall will be evaluated.

Architects/Engineers. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Architects and/or Engineers. An classified Architect or Engineer is defined as an individual who is licensed to practice as a professional engineer or registered architect to practice and commands the necessary expertise, in terms of knowledge and experience, to undertake the required task. Only employees who are currently employed within the Offeror’s own company or that of a teaming subcontractor shall will be evaluated.

Contract Program Manager. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Program Managers. Program Managers are required to meet the qualifications for Contract Program Manager as defined in the contract SOW. Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Quality Control Manager. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Quality Control Manager. Quality Control Managers are required to meet the qualifications for Quality Control Manager as defined in contract SOW and specification section 01 45 00, Quality Control.

Personnel used for rating of Level 2 Site Safety and Health Officer (SSHO) may also be used for this category, as long as qualifications for both are met. Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Site Safety and Health Officer. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Level 1, Level 2, and Level 3 Site Safety Health Officers who meet the qualifications as defined in contract SOW, specification section 01 35 26, Governmental Safety Requirements and US Army Corp of Engineers publication EM 385-1-1, Safety – Safety and Occupational Health Requirements.

Personnel used for rating of Quality Control Manager may also be used for Level 2 SSHOs, as long as qualifications for both are met.

Personnel used for rating of Superintendents may also be used for Level 3 SSHOs, as long as qualifications for both are met.

Only employees who are employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Design Program Manager. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Design Program Manager as defined in contract SOW. Only employees who are employed within the Offeror’s own company or that of a teaming subcontractor shall will be evaluated.

Superintendents. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Superintendent as defined in contract SOW. Personnel used for ratings of Level 3 SSHOs may also be used for this category, as long as qualifications for both are met. Only employees who are employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

TECHNICAQL EXPERIENCE FULL AND OPEN POOL Evaluation Section 1, (,Categories 1-4) : RELEVANT CONSTRUCTION EXPERIENCE.

Category 1: Commercial, Industrial & Residential Bldg.Construction Multi-Trade.

Commercial, Industrial & Residential Construction. In this category, the Government will assess the Offerors Technical Experience by validating points assigned to the value number of multiple trade construction projects, where the Offeror was Prime Contractor, within thresholdwith values of over $10 million.

Commercial, Industrial & Residential Construction - Number of Trades. In this category, the Government will assess the Offerors Technical Experience by validating points assigned to the number of trades for each of the submitted construction projects.

Category 2: Construction for the Department of Defense (DoD)/Department of War (DoW). In this category, using only projects submitted for Category 1, the Government will assess the Offeror’s Technical Experience by validating points assigned to the number of projects executed as Prime Contractor executed for the Department of War DoD/DoW with a magnitude of over $10 Million.

Category 3: Multiple Construction Multi TradeProjects in Parallel. In this category, using only projects submitted for Category 1, the Government will assess the Offeror’s Technical Experience by validating points assigned for performing multi-trade multiple construction projects with multiple projects performed in parallel during a period of at least six (6) months. Multiple Trade is defined as having more than one trade within a single project. Execution in parallel is defined as concurrent.

Category 4: Specialized Construction. In this category, using only projects submitted for Category 1, the Government will access the Offeror’s Technical Experience by validating points assigned to Prime Contractor experience in up to one (project exceeding $10 Million specialized construction projects in each of the following subcategories (up to one per category):

AT/FP measuresMeasures, Fire Protection/Suppression Systems Road Parking/Pavement Construction Utility System Construction Roofing Airfield Construction Section 2, Category 5: DESIGN EXPERIENCE Experience as Prime Contractor on Design Build Projects. In this category, the Government will assess the Offeror’s Technical Experience by validating points assigned to the Offeror’s experience as a Prime Contractor with for Design-Build projects.

Design Document Submission. In this category, the Government will assess the Offeror’s Technical Experience by validating points assigned to one design-build project, including completeness of the design across the drawings, specifications, and design analysis/calculations; and compliance with Unified Facilities Criteria (UFC) and the corresponding International Code Council (ICC) model codes and/or standards (i.e. NFPA, ASTM).the Offeror’s compliance with Unified Facilities Guides Specification (UFGS) 01 33 16.00.10, Design Data (Design After Award). It is important for the Government to understand the Offeror’s prior experience and ability to problem solve if, and when, unknowns arise in a given construction project.

Section 3, Category 6: CERTIFICATIONS Project Management Professional. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the Project Management Professional certification as defined in SOW 3.1.2. Only employees who are currently employed within the Offeror’s own company or that of a teaming subcontractor contingent hires shall will be evaluated. Expired certifications will receive a score of zero.

Certification for Leadership in Energy and Environmental Design (LEED) Professionals. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the LEED Professional certification (Green Associate (GA) or Accredited Professional (AP)). Only employees who are currently employed within the Offeror’s own company (or congent hire) or that of a teaming subcontractor shall will be evaluated. Expired certification(s) will receive a score of zero.

Certification for Safety Professionals. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to one or more certified Safety Professionals. Certifications must be above and beyond the minimum requirements in Section 7, Staffing, Site Safety and Health Manager. Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Certification for Quality Personnel. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to one or more certified Quality Personnel. Certifications must be above and beyond minimum requirements in Section 7, Staffing, Quality Control Manager. Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Section 4, Category 7: STAFFING Trade/Construction Laborers. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Trade/Construction Laborers. Trade/Construction Laborers are defined as workers whose duties are manual or physical in nature (including those workers who use tools or who are performing the work of a trade), as distinguished from mental or managerial. Only employees who are currently employed within the Offeror’s own company or that of a teaming subcontractor shall will be evaluated.

Architects/Engineers. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Architects and/or Engineers. An classified Architect or Engineer is defined as an individual who is licensed as a professional engineer or registered architect to practice and commands the necessary expertise, in terms of knowledge and experience, to undertake the required task. Only employees who are currently employed within the Offeror’s own company or that of a teaming subcontractor shall will be evaluated.

Contract Program Manager. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Program Managers. Program Managers are required to meet the qualifications for Contract Program Manager as defined in the contract SOW. Only employees who are currently employed within the Offeror’s own company (or contingent hire) or that of a teaming subcontractor shall will be evaluated.

Quality Control Manager. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Quality Control Manager. Quality Control Managers are required to meet the qualifications for Quality Control Manager as defined in contract SOW and specification section 01 45 00, Quality Control.

Personnel used for rating of Level 2 Site Safety and Health Officer (SSHO) may also be used for this category, as long as qualifications for both are met. Only employees who are currently employed within the Offeror’s own company (or contingent hire) willor that of a teaming subcontractor shall be evaluated.

Site Safety and Health Officer. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Level 1, Level 2, and Level 3 Site Safety Health Officers who meet the qualifications as defined in contract SOW, specification section 01 35 26, Governmental Safety Requirements and US Army Corp of Engineers publication EM 385-1-1, Safety – Safety and Occupational Health Requirements.

Personnel used for rating of Quality Control Manager may also be used for Level 2 SSHOs, as long as qualifications for both are met.

Personnel used for rating of Superintendents may also be used for Level 3 SSHOs, as long as qualifications for both are met.

Only employees who are employed within the Offeror’s own company (or contingent hire) willor that of a teaming subcontractor shall be evaluated.

Design Program Manager. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Design Program Manager as defined in contract SOW. Only employees who are employed within the Offeror’s own company or that of a teaming subcontractor shall will be evaluated.

Superintendents. In this category, the Government will assess the Offeror’s Technical Expertise by validating points assigned to the number of personnel classified as Superintendent as defined in contract SOW. Personnel used for ratings of Level 3 SSHOs may also be used for this category, as long as qualifications for both are met. Only employees who are employed within the Offeror’s own company (or contingent hire)or that of a teaming subcontractor shall will be evaluated.

File details come from the government source that posted it. Updated .