(Reference Only) Attachment_2c_Appendix_C_MACC_SBSelf_Scoring_Matrix_25 Oct 26.xlsx
XLSX spreadsheet 29 KB Posted
- Solicitation number
- FA8137-26-R-0040
About this file
This file is a self-scoring matrix template for the Tinker Air Force Base 2026 Multiple Award Construction Contract (MACC) solicitation. The document provides a scoring framework for evaluating contractor proposals against established evaluation criteria, though it does not specify the detailed scoring values, weight percentages, or specific evaluation factors. As a template attachment to solicitation FA8137-26-R-0040, this matrix is intended to guide contractors in understanding how their proposals will be assessed during the evaluation process, but the actual scoring thresholds and point allocations are not populated in this reference version dated October 26, 2026.
The MACC itself is an Indefinite Delivery Indefinite Quantity (IDIQ) contract vehicle issued by the Department of the Air Force Materiel Command Air Force Sustainment Center for general construction services at Tinker Air Force Base, Oklahoma. The contract will execute complex sustainment, maintenance, repair, alteration/renovation, and minor construction projects using either Design-Build or Construction with Limited Design delivery methods. The proposal deadline was adjusted multiple times throughout the solicitation process, with the final due date set for October 28, 2026, following multiple amendment cycles addressing contractor questions and clarifications.
View the file
Other files
Show 40 more
Latest 50 of 79 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| Air Force Sustainment Center PZIOC MACC |
| Solicitation No.: FA813726R0040 |
| Appendix C to Section L, Small Business Pool Self-Scoring Matrix |
| Element | Offeror to Fill This Column Only | Point Value | Score | ||
| Instruction to Offeror Paragraph | Section 1 – RELEVANT CONSTRUCTION EXPERIENCE | ||||
| Relevant Construction Projects:The submitted projects must meet the conditions listed below; completed after 1 May 2021; or at least 80% complete as of solicitation date | |||||
| Category 1 | Commercial, Industrial & Residential Construction, Multi Trade | ||||
| Paragraph 5.1.1.1.1. | Submit multiple trade projects within the following thresholds (minimum of 1 project in at least one of the categories, up to 5 in each range, maximum of 10 total) | 1-10 Projects (total) | Point Value Each | Total Across | |
| Prime Contractor, $1M to $5M construction cost, Multiple Trades: Note: each project submitted receives a point value of 400pts | 400 | 0 | |||
| Prime Contractor, greater than $5M construction cost, Multiple Trades: Note: each project submitted receives a point value of 100 pts. | 100 | 0 | |||
| Paragraph 5.1.1.1.2. | Identify the number of projects for each threshold, per definitions provided in referenced paragraph. | 1-10 Projects (total) | Point Value Each | Total Across | |
| Number of trades 5-10 Note: each project submitted receives a point value of 200pts. | 200 | 0 | |||
| Number of trades greater than 10 Note: each project submitted receives a point value of 300pts. | 300 | 0 | |||
| Category 2 | Construction for the DoD/DoW | ||||
| Paragraph 5.1.1.2 | Identify projects executed for the DoD/DoW, up to 4 total | 0-4 Projects | Point Value Each | Total Across | |
| Prime Contractor greater than $1M: Note: each project submitted receives a point value of 300pts. | 300 | 0 | |||
| Category 3 | Multiple Construction Projects Executed in Parallel | ||||
| Paragraph 5.1.1.3 | Identify 2 to 4 Projects executed in parallel during a period of at least 6 months, with multiple trades as defined in referenced paragraph. | 2-4 Projects | Point Value Each | Total Across | |
| Prime Contractor Multiple Projects parallel in execution: Note: each project submitted receives a point value of 200pts. | 200 | 0 | |||
| Category 4 | Specialized Construction (specified construction category shall be at least 60% of total project) | ||||
| Paragraph 5.1.1.4 | Submit a Project for each threshold, up to 1 total specialized construction project for each Specialized Construction category. Note: each project submitted receives a point value of 100pts. | 0-1 Projects | Point Value Each | Total Across | |
| Prime Contractor, geater than $1M construction cost, AT/FP MEASURES (e.g. SECURITY FENCE/BARRIERS, WINDOWS): Note: each project submitted receives a point value of 100pts. | 100 | 0 | |||
| Prime Contractor, geater than $1M construction cost, FIRE PROTECTION/SUPPRESSION SYSTEMS: Note: each project submitted receives a point value of 100pts. | 100 | 0 | |||
| Prime Contractor, geater than $1M construction cost, ROAD/PARKING/PAVEMENT CONSTRUCTION: Note: each project submitted receives a point value of 100pts. | 100 | 0 | |||
| Prime Contractor, geater than $1M construction cost, UTILITY SYSTEM CONSTRUCTION: Note: each project submitted receives a point value of 100pts. | 100 | 0 | |||
| Prime Contractor, geater than $1M construction cost, ROOFING: Note: each project submitted receives a point value of 100pts. | 100 | 0 | |||
| Prime Contractor, geater than $1M construction cost, AIRFIELD CONSTRUCTION: Note: each project submitted receives a point value of 100pts. | 100 | 0 | |||
| SUBTOTAL SCORE FOR THIS SECTION ONLY: | 0 | ||||
| Instruction to Offeror Paragraph | Section 2 - DESIGN EXPERIENCE | ||||
| Relevant Design-Build Projects: The submitted projects must meet the conditions listed below; completed after 1 May 2021; OR at least 80% complete as of solicitation date | |||||
| Category 5 | Experience as Prime on Design-Build Projects (KTR Executes Design and Construction) | ||||
| Paragraph 5.1.2.1. | Submit a Project with Design Build effort | 0-1 Projects | Point Value Each | Total Across | |
| Prime Contractor, greater than $1M construction cost: Note: the project submitted receives a point value of 400pts. | 400 | 0 | |||
| Paragraph 5.1.2.2. | For the Project above, submit all design documents to demonstrate compliance with Unified Facilities Criteria (UFC) and the corresponding International Code Council (ICC) model codes and/or standards (i.e. NFPA, ASTM, ASCE) | Yes or No | Point Value Each | Total Across | |
| Specifications: Note: completeness and accuracy of documents and compliance with local code requirements receives a point value of 20pts. | |||||
| Interior and exterior walls (vertical construction elements) | 20 | 0 | |||
| Ceilings (horizontal construction elements) | 20 | 0 | |||
| Roofs | 20 | 0 | |||
| Waste water, water, and gas systems | 20 | 0 | |||
| Fire-extinguishing systems | 20 | 0 | |||
| Heat-supply systems | 20 | 0 | |||
| HVAC systems | 20 | 0 | |||
| Electrical systems | 20 | 0 | |||
| Communications, security and information systems | 20 | 0 | |||
| Building automation and automation of engineering structures | 20 | 0 | |||
| Drawings: Note: completeness and accuracy of documents and compliance with local code requirements receives a point value of 40pts. | |||||
| Interior and exterior walls (vertical construction elements) | 40 | 0 | |||
| Ceilings (horizontal construction elements) | 40 | 0 | |||
| Roofs | 40 | 0 | |||
| Waste water, water, and gas systems | 40 | 0 | |||
| Fire-extinguishing systems | 40 | 0 | |||
| Heat-supply systems | 40 | 0 | |||
| HVAC systems | 40 | 0 | |||
| Electrical systems | 40 | 0 | |||
| Communications, security and information systems | 40 | 0 | |||
| Building automation and automation of engineering structures | 40 | 0 | |||
| Design Analysis/Calculations: Note: completeness and accuracy of documents and compliance with local code requirements receives a point value of 40pts. | |||||
| Interior and exterior walls (vertical construction elements) | 40 | 0 | |||
| Ceilings (horizontal construction elements) | 40 | 0 | |||
| Roofs | 40 | 0 | |||
| Waste water, water, and gas systems | 40 | 0 | |||
| Fire-extinguishing systems | 40 | 0 | |||
| Heat-supply systems | 40 | 0 | |||
| HVAC systems | 40 | 0 | |||
| Electrical systems | 40 | 0 | |||
| Communications, security and information systems | 40 | 0 | |||
| Building automation and automation of engineering structures | 40 | 0 | |||
| SUBTOTAL SCORE FOR THIS SECTION ONLY: | 0 | ||||
| Instruction to Offeror Paragraph | Section 3 - CERTIFICATIONS/LICENCES | ||||
| Category 6 | Does the Offeror have each or any of the following? Type the word Yes or No in Column C. | ||||
| Paragraph 5.1.3.1. | Project Management Professional | Yes or No | Point Value Each | Total Across | |
| Only one Yes which = 100pts /No = 0pts. | 100 | 0 | |||
| Paragraph 5.1.3.2. | LEED Professional | ||||
| Only one Yes which = 100pts/No = 0pts. | 100 | 0 | |||
| Paragraph 5.1.3.3. | Safety Professional | ||||
| Only one Yes which = 100pts/No = 0pts. | 100 | 0 | |||
| Paragraph 5.1.3.4. | Quality Professional | ||||
| Only one Yes which = 100pts/No = 0pts. | 100 | 0 | |||
| SUBTOTAL SCORE FOR THIS SECTION ONLY: | 0 | ||||
| Instruction to Offeror Paragraph | Section 4 - STAFFING | ||||
| Category 7 | Does the Offeror currently have the following employees on their staff or have they previously employed these positions as of 1 May 2021? Type the word Yes or No in Column C. | Need to be currently employed or commitment letter. | |||
| Paragraph 5.1.4.1. | Trade/Construction Workers | ||||
| Submit number of personnel, pick only one | Yes or No | Point Value Each | Total Across | ||
| 1 - 5 Workers: Note: Only one Yes which = 100pts/No = 0pts. | 100 | 0 | |||
| >5 Workers: Note: Only one Yes, which = 200pts/No = 0pts | 200 | 0 | |||
| Paragraph 5.1.4.2. | Architects/Engineers | ||||
| Submit number of personnel, pick only one | |||||
| 1 - 3 A/E: Note: Only one Yes which = 100pts/No = 0pts. | 100 | 0 | |||
| >3 A/E: Note: Only one Yes which = 200pts/No = 0pts. | 200 | 0 | |||
| Paragraph 5.1.4.3. | Contract Program Manager(s) | ||||
| Submit number of personnel, pick only one | |||||
| 1: Note: Only one Yes which = 100pts/No = 0pts. | 100 | 0 | |||
| >1: Note: Only one Yes which = 200pts/No = 0pts. | 200 | 0 | |||
| Paragraph 5.1.4.4. | Quality Control Manager(s) | ||||
| Submit number of personnel, pick only one | |||||
| 1-2: Note: Only one Yes which = 100pts/No = 0pts. | 100 | 0 | |||
| >2: Note: Only one Yes which = 200pts/No = 0pts. | 200 | 0 | |||
| Paragraph 5.1.4.5.1. | Site Safety and Health Manager(s) | ||||
| Submit number of personnel, pick only one for each level | |||||
| Level 1 | |||||
| Only one Yes which = 200pts max /No = 0pts. | 200 | 0 | |||
| Level 2 | |||||
| 1-2: Note: Only one Yes which = 100pts max /No = 0pts. | 100 | 0 | |||
| >2: Note: Only one Yes which = 200pts max /No = 0pts. | 200 | 0 | |||
| Level 3 | |||||
| 1-3: Note: Only one Yes which = 100pts max /No = 0pts. | 100 | 0 | |||
| >3: Note: Only one Yes which = 200pts max /No = 0pts. | 200 | 0 | |||
| Paragraph 5.1.4.6. | Design Program Manager(s) | ||||
| Submit number of personnel, pick only one | |||||
| 1: Note: Only one Yes which = 100pts max /No = 0pts. | 100 | 0 | |||
| >1: Note: Only one Yes which = 200pts max /No = 0pts. | 200 | 0 | |||
| Paragraph 5.1.4.7. | Superintendents | ||||
| Submit number of personnel, pick only one | |||||
| 1-2: Note: Only one Yes which = 100pts max /No = 0pts. | 100 | 0 | |||
| >2: Note: Only one Yes which = 200pts max /No = 0pts. | 200 | 0 | |||
| SUBTOTAL SCORE FOR THIS SECTION ONLY: | 0 | ||||
| TOTAL POINTS SCORED | - 0 | ||||
| MAXIMUM POINTS | 11,700 | ||||
| MINIMUM SCORE REQUIRED | 8,190 |
File details come from the government source that posted it. Updated .