FA8101-15-R-0006-0006_21_Jan_16.pdf

F3Y0AA2341A002

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to correct descriptions on CLINs X002, X004, X004AA, X004AB, X007AB, X007AG, X008AA, X008AB, X010AA, X010AB, X010AC, X014, X015, and 0016, correct appendices numbering in the table of contents and section 4 of the PWS, update the pricing matrix w ith the correct CLIN descriptions, change the quantity and unit of issue on CLINs X015, and correct the formatting of Section J.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 24

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 21-Jan-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X FA8101-15-R-0006

X 9B. DATED (SEE ITEM 11)

10-Jul-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

21-Jan-2016

CODE

AFSC/PZIOCA

CANDACE C DITTMER/405-739-4170

7858 5TH ST, STE 1

TINKER AFB OK 73145

FA8101 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

FA8101-15-R-0006

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

PURPOSE OF AMENDMENT

FIRST: The CLIN descriptions on CLINs X002, X004, X004AA, X004AB, X007AB, X007AG, X008AA, X008AB, X010AA, X010AB, X010AC, X014, X015, and 0016 are hereby revised as follows:

CLIN FROM: TO:

X002 Drafting, Surveying, Mapping and Engineering

Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8.

See Attachment Appendix 4.7 Deliverables A001 & A016.

Drafting, Surveying, Mapping and Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8.

X004 INFORMATION ONLY: Project Management & Preliminary Contract Management (Non- DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru

1.1.4.1. See Attachment Appendix 4.7

Deliverable A017.

INFORMATION ONLY: Project Management & Preliminary Contract Management (Non- DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru

1.1.4.1. See Attachment Appendix 4.7

Deliverables A008 and A009.

X004AA Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru

1.1.4.1. See Attachment Appendix 4.7

Deliverable A017.

Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru

1.1.4.1. See Attachment Appendix 4.7

Deliverables A008 and A009.

X004AB Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru

1.1.4.1. See Attachment Appendix 4.7

Deliverable A017.

Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru

1.1.4.1. See Attachment Appendix 4.7

Deliverables A008 and A009.

X007AB 100% Design $500,001 through $1,000,00 100% Design $500,001 through $1,000,000 X007AG Preliminary 35% Design (SABER or MACC)

PWS Reference Number 1.1.3.3 through 1.1.3.17.

Preliminary 35% Design (SABER or MACC) PWS Reference Number 1.1.3.2.3, 1.1.3.2.4, and 1.1.3.3 thru 1.1.3.17.

X008AA Full Contract & Construction Mgmt (Non-

MILCON)

PWS Reference Number 1.1.5 through

1.1.5.15. See Attachment Appendix 4.7

Deliverables A009 & A010.

___ % price to be earned on each construction management order. See PWS Appendix 4.5.4

Full Contract & Construction Mgmt (Non-

MILCON)

PWS Reference Number 1.1.5 thru 1.1.5.15.

See Attachment Appendix 4.7 Deliverables A009 & A010.

___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes. for workload estimates for bidding purposes.

Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for full contract and construction management is unknown. The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.

X008AB Liaison Contract & Construction (Non- MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.

Liaison Contract & Construction (Non- MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.

Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for liaison contract and construction is unknown. The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.

X010AA Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013 & A014.

Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 thru1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013, and A014.

X010AB Operation Engineering Management (NAVY Facilities) PWS Reference Number 1.1.7 and

1.1.7.3. See Attachment Appendix 4.7

Deliverable A012, A013 & A014.

Operation Engineering Management (NAVY Facilities) PWS Reference Number 1.1.7 thru

1.1.7.3. See Attachment Appendix 4.7

Deliverable A012, A013, and A014.

X010AC Operation Engineering Management (DLA Facilities) PWS Reference Number 1.1.7 and

1.1.7.3. See Attachment Appendix 4.7

Deliverable A012, A013 & A014.

Operation Engineering Management (DLA Facilities) PWS Reference Number 1.1.7 thru

1.1.7.3. See Attachment Appendix 4.7

Deliverable A012, A013, and A014.

X014 Required General Service & Quality Control PWS Reference Number 1.2 through 1.2.10 and 1.4 through 1.4.1.5. See Attachment Appendix 4.7 Deliverable A018 & A019.

Required General Service & Quality Control PWS Reference Number 1.2 thru 1.2.10, 1.4 thru 1.5.12, and 3.1 thru 3.1.9. See Attachment Appendix 4.7 Deliverables A001, A016, A017, A018, and A019.

X015 Quality Performance Incentive (QPI) Populate In Accordance With Pricing Matrix.

IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts

Quality Performance Incentive (QPI) Populate In Accordance With Pricing Matrix.

IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance.

The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month.

will be held in CLINs X015 and may be earned monthly through satisfactory performance.

The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month.

Note: The quantity of 500 lots is for system administration purposes. The quantity of 500 lots allows for orders to be issued with monthly performance measurement and invoicing for monthly service CLINs and performance measurement and invoicing upon completion of non-core design work, construction management (DMAG), and bridge inspection orders.

0016 CONTRACT TRANSITION-IN

PWS Reference Number 1.3 through 1.3.2.4.

CONTRACT TRANSITION-IN

PWS Reference Number 1.3 thru 1.3.1.4.

SECOND: PWS revision 3 dated 12 Jan 2016 is hereby incorporated to correct appendices numbering in the table of contents and section 4 of the PWS.

THIRD: The CE Engineering Management Pricing Matrix, dated 12 Jan 2016, is hereby incorporated to correct the CLIN descriptions on CLINS X007AG, X010AA, X010AB, X010AC X014, and 0016. The pricing matrix does not need to be resubmitted solely due to the corrections made to the CLIN descriptions.

FOURTH: The quantity and unit of issue on CLINs X015 are hereby changed as follows:

MAX QUANTITY UNIT

FROM: 22 Each

MAX QUANTITY UNIT

TO: 500 Lot

FIFTH: The formatting of Section J is hereby updated to make administrative corrections.

SIXTH: Submittal of the signed amendment without supporting documentation for corresponding price adjustment acknowledges no price adjustments are applicable to this amendment. However, if this amendment drives a change in pricing, provide supporting documentation in the form of an updated price matrix and rationale for each adjustment. Pricing shall only be revised for CLINs corrected in this amendment i.e. X002, X004, X004AA, X004AB, X007AB, X007AG, X008AA, X008AB, X010AA, X010AB, X010AC, X014, X016.

Pricing for CLIN X015 will be calculated in accordance with H-1 Performance Incentive/Quality Performance Indicators and the pricing matrix.

SEVENTH: All other terms and conditions remain unchanged and in full force and effect.

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0002

The CLIN extended description has changed from Drafting, Surveying, Mapping and Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8. See Attachment Appendix 4.7 Deliverables A001 & A016.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Drafting, Surveying, Mapping and Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8.

Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145.

SUBCLIN 0004AA

The CLIN extended description has changed from Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverables A008 and A009.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145.

SUBCLIN 0004AB

Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017. Inspection and Acceptance:

At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7 Deliverables A008 and A009. Inspection and Acceptance: At Destination by

GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145.

SUBCLIN 0007AB

The CLIN description has changed from 100% Design $500,001 through $1,000,00 to 100% Design $500,001 through $1,000,000.

SUBCLIN 0007AG

The CLIN extended description has changed from Preliminary 35% Design (SABER or MACC) PWS Reference Number 1.1.3.3 through 1.1.3.17. Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Preliminary 35% Design (SABER or MACC) PWS Reference Number 1.1.3.2.3, 1.1.3.2.4, and

1.1.3.3 thru 1.1.3.17. Inspection and Acceptance: At Destination by GovernmentDelivery:

F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145.

SUBCLIN 0008AA

The CLIN extended description has changed from Full Contract & Construction Mgmt (Non-MILCON) PWS Reference Number 1.1.5 through 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Full Contract & Construction Mgmt (Non-MILCON) PWS Reference Number 1.1.5 thru 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for full contract and construction management is unknown.

The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145.

SUBCLIN 0008AB

The CLIN extended description has changed from Liaison Contract & Construction (Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Liaison Contract & Construction (Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for liaison contract and construction is unknown. The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB

OK 73145.

SUBCLIN 0010AA

The CLIN extended description has changed from Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 thru1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013, and A014.Inspection and Acceptance: At

SUBCLIN 0010AB

(NAVY Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (NAVY Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013, and A014.Inspection and Acceptance: At

SUBCLIN 0010AC

(DLA Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DLA Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

CLIN 0014

The CLIN extended description has changed from Required General Service & Quality Control PWS Reference Number 1.2 through 1.2.10 and 1.4 through 1.4.1.5. See Attachment Appendix 4.7 Deliverable A018 & A019.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Required General Service & Quality Control PWS Reference Number 1.2 through 1.2.10, 1.4 thru 1.5.12, and 3.1 thru 3.1.9. See Attachment Appendix 4.7 Deliverables A001, A016, A017, A018, and A019.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145.

CLIN 0015

The CLIN extended description has changed from Populate In Accordance With Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month. to Populate In Accordance With Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month.Note: The quantity of 500 lots is for system administration purposes. The quantity of 500 lots allows for orders to be issued with monthly performance measurement and invoicing for monthly service CLINs and performance measurement and invoicing upon completion of non-core design work, construction management (DMAG), and bridge inspection orders..

The pricing detail quantity has increased by 478.00 from 22.00 to 500.00.

The unit of issue has changed from Months to Lot.

The cost constraint EST has been added.

CLIN 0016

The CLIN extended description has changed from CONTRACT TRANSITION-IN PWS Reference Number 1.3 through 1.3.2.4Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to CONTRACT TRANSITION-IN PWS Reference Number 1.3 thru 1.3.1.4Inspection and Acceptance: At

CLIN 1002

Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8. See Attachment

Appendix 4.7 Deliverables A001 & A016.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Drafting, Surveying, Mapping and Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8.

SUBCLIN 1004AA

Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverables

SUBCLIN 1004AB

Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017. Inspection and Acceptance:

At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7

SUBCLIN 1007AB

SUBCLIN 1007AG

or MACC) PWS Reference Number 1.1.3.3 through 1.1.3.17. Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Preliminary 35% Design (SABER or MACC) PWS Reference Number 1.1.3.2.3, 1.1.3.2.4, and

SUBCLIN 1008AA

(Non-MILCON) PWS Reference Number 1.1.5 through 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Full Contract & Construction Mgmt (Non-MILCON) PWS Reference Number 1.1.5 thru 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for full contract and construction management is unknown.

The quantity of 500 allows for an unknown amount of orders to be issued with performance

SUBCLIN 1008AB

(Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Liaison Contract & Construction (Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for liaison contract and construction is unknown. The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.Inspection

SUBCLIN 1010AA

(DMAG Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 thru1.1.7.3. See

SUBCLIN 1010AB

(NAVY Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (NAVY Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

SUBCLIN 1010AC

(DLA Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DLA Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

CLIN 1014

Quality Control PWS Reference Number 1.2 through 1.2.10 and 1.4 through 1.4.1.5. See Attachment Appendix 4.7 Deliverable A018 & A019.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Required General Service & Quality Control PWS Reference Number 1.2 through 1.2.10, 1.4 thru 1.5.12, and 3.1 thru 3.1.9. See Attachment Appendix 4.7 Deliverables A001, A016, A017, A018, and

CLIN 1015

Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month. to Populate In Accordance With Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each

CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month.Note: The quantity of 500 lots is for system administration purposes. The quantity of 500 lots allows for orders to be issued with monthly performance measurement and invoicing for monthly service CLINs and performance measurement and invoicing upon completion of non-core design work, construction management (DMAG), and bridge inspection orders..

The pricing detail quantity has increased by 488.00 from 12.00 to 500.00.

CLIN 2002

Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8. See Attachment Appendix 4.7 Deliverables A001 & A016.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Drafting, Surveying, Mapping and Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8.

SUBCLIN 2004AA

Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverables

SUBCLIN 2004AB

Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017. Inspection and Acceptance:

At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7

SUBCLIN 2007AB

SUBCLIN 2007AG

or MACC) PWS Reference Number 1.1.3.3 through 1.1.3.17. Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Preliminary 35% Design (SABER or MACC) PWS Reference Number 1.1.3.2.3, 1.1.3.2.4, and

SUBCLIN 2008AA

(Non-MILCON) PWS Reference Number 1.1.5 through 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Full Contract & Construction Mgmt (Non-MILCON) PWS Reference Number 1.1.5 thru 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for full contract and construction management is unknown.

The quantity of 500 allows for an unknown amount of orders to be issued with performance

SUBCLIN 2008AB

(Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Liaison Contract & Construction (Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for liaison contract and construction is unknown. The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.Inspection

SUBCLIN 2010AA

(DMAG Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 thru1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013 & A014.Inspection and Acceptance: At

SUBCLIN 2010AB

(NAVY Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (NAVY Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

SUBCLIN 2010AC

(DLA Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DLA Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

CLIN 2014

Quality Control PWS Reference Number 1.2 through 1.2.10 and 1.4 through 1.4.1.5. See Attachment Appendix 4.7 Deliverable A018 & A019.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Required General Service & Quality Control PWS Reference Number 1.2 through 1.2.10, 1.4 thru 1.5.12, and 3.1 thru 3.1.9. See Attachment Appendix 4.7 Deliverables A001, A016, A017, A018, and

CLIN 2015

Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month. to Populate In Accordance With Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month.Note: The quantity of 500 lots is for system administration purposes. The quantity of 500 lots allows for orders to be issued with monthly performance measurement and invoicing for monthly service CLINs and performance measurement and invoicing upon completion of non-core design work, construction management (DMAG), and bridge inspection orders..

CLIN 3002

Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8. See Attachment Appendix 4.7 Deliverables A001 & A016.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Drafting, Surveying, Mapping and Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8.

SUBCLIN 3004AA

Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverables

SUBCLIN 3004AB

Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017. Inspection and Acceptance:

At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7

SUBCLIN 3007AB

SUBCLIN 3007AG

or MACC) PWS Reference Number 1.1.3.3 through 1.1.3.17. Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Preliminary 35% Design (SABER or MACC) PWS Reference Number 1.1.3.2.3, 1.1.3.2.4, and

SUBCLIN 3008AA

(Non-MILCON) PWS Reference Number 1.1.5 through 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Full Contract & Construction Mgmt (Non-MILCON) PWS Reference Number 1.1.5 thru 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for full contract and construction management is unknown.

The quantity of 500 allows for an unknown amount of orders to be issued with performance

SUBCLIN 3008AB

(Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Liaison Contract & Construction (Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for liaison contract and construction is unknown. The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.Inspection

SUBCLIN 3010AA

(DMAG Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverables A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 thru1.1.7.3. See

SUBCLIN 3010AB

(NAVY Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (NAVY Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

SUBCLIN 3010AC

(DLA Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DLA Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

CLIN 3014

Quality Control PWS Reference Number 1.2 through 1.2.10 and 1.4 through 1.4.1.5. See Attachment Appendix 4.7 Deliverable A018 & A019.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Required General Service & Quality Control PWS Reference Number 1.2 through 1.2.10, 1.4 thru 1.5.12, and 3.1 thru 3.1.9. See Attachment Appendix 4.7 Deliverables A001, A016, A017, A018, and

CLIN 3015

Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month. to Populate In Accordance With Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month.Note: The quantity of 500 lots is for system administration purposes. The quantity of 500 lots allows for orders to be issued with monthly performance measurement and invoicing for monthly service CLINs and performance measurement and invoicing upon completion of non-core design work, construction management (DMAG), and bridge inspection orders..

CLIN 4002

Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8. See Attachment Appendix 4.7 Deliverables A001 & A016.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Drafting, Surveying, Mapping and Engineering Technical Services PWS Reference Number 1.1.2 thru 1.1.2.8.

SUBCLIN 4004AA

Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (Non-DMAG Funded Program) PWS Reference Number 1.1.3. and 1.1.4 thru 1.1.4.1. See Attachment Appendix 4.7 Deliverables

SUBCLIN 4004AB

Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7 Deliverable A017. Inspection and Acceptance:

At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Project Management & Preliminary Contract Management (DMAG Funded Program) PWS reference paragraphs 1.1.3 and 1.1.4 through 1.1.4.1. See Attachment Appendix 4.7

SUBCLIN 4007AB

SUBCLIN 4007AG

or MACC) PWS Reference Number 1.1.3.3 through 1.1.3.17. Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Preliminary 35% Design (SABER or MACC) PWS Reference Number 1.1.3.2.3, 1.1.3.2.4, and

SUBCLIN 4008AA

(Non-MILCON) PWS Reference Number 1.1.5 through 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Full Contract & Construction Mgmt (Non-MILCON) PWS Reference Number 1.1.5 thru 1.1.5.15. See Attachment Appendix 4.7 Deliverables A009 & A010.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for full contract and construction management is unknown.

The quantity of 500 allows for an unknown amount of orders to be issued with performance

SUBCLIN 4008AB

(Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order. See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Liaison Contract & Construction (Non-MILCON) PWS Reference Number 1.1.5.16.___ % price to be earned on each construction management order.

See PWS Appendix 4.5.4 for workload estimates for bidding purposes.Note: The quantity of 500 lots is for system administration purposes. The exact amount of orders for liaison contract and construction is unknown. The quantity of 500 allows for an unknown amount of orders to be issued with performance measurement and invoicing at the completion of each order.Inspection

SUBCLIN 4010AA

(DMAG Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7

Deliverables A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DMAG Facilities) PWS Reference Number 1.1.7 thru1.1.7.3. See

SUBCLIN 4010AB

(NAVY Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (NAVY Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

SUBCLIN 4010AC

(DLA Facilities) PWS Reference Number 1.1.7 and 1.1.7.3. See Attachment Appendix 4.7 Deliverable A012, A013 & A014.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Operation Engineering Management (DLA Facilities) PWS Reference Number 1.1.7 thru 1.1.7.3. See

CLIN 4014

Quality Control PWS Reference Number 1.2 through 1.2.10 and 1.4 through 1.4.1.5. See Attachment Appendix 4.7 Deliverable A018 & A019.Inspection and Acceptance: At Destination by GovernmentDelivery: F3Y0AA – 72 ABW/CE, Tinker AFB OK 73145 to Required General Service & Quality Control PWS Reference Number 1.2 through 1.2.10, 1.4 thru 1.5.12, and 3.1 thru 3.1.9. See Attachment Appendix 4.7 Deliverables A001, A016, A017, A018, and

CLIN 4015

The CLIN extended description has changed from Populate In Accordance With Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs

X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place.

Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered.

Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month. to Populate In Accordance With Pricing Matrix.IAW H-1 Performance Incentive/Quality Performance Indicators, 8% of all Contract Line Items (CLINs) will be held “at risk” for satisfactory performance. In general, each CLIN will be reduced by 8%. These amounts will be held in CLINs X015 and may be earned monthly through satisfactory performance. The contractor may earn a percentage of the performance incentive based on the percentage of QPI earned during the respective month performance takes place. Because this is an IDIQ contract the 8% being held at risk is based on all proposed contract quantities being ordered. Therefore the monthly pool the QPI factors will be applied to will be based on 8% of actual orders placed each month.Note: The quantity of 500 lots is for system administration purposes. The quantity of 500 lots allows for orders to be issued with monthly performance measurement and invoicing for monthly service CLINs and performance measurement and invoicing upon completion of non-core design work, construction management (DMAG), and bridge inspection orders..

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

The following have been modified:

LIST OF DOCUMENT/ATTACHMENTS

Section J

DOCUMENT NAME PAGES

PWS Revision 3 dated 12 Jan 16 56

Appendix 4.1 Acronyms dated 10 Jul 15 3

Appendix 4.2 Applicable Publications and Forms Appendix 4.2.1 General Specifications for Construction 4.2.1a 00 70 00 General Requirements for Construction dated 18 Jun 14 29 4.2.1b 00 71 00 General Safety Requirements for Construction dated 18 Jun 14 10 4.2.1c 00 72 00 Environmental Requirements for Construction dated 18 Jun 14 83 4.2.1d 00 80 00 Special Provisions dated 10 Jul 15 2 4.2.1e 01 33 00 Unified Facilities Guide Specifications dated 10 Jul 15 14 4.2.1f 01 45 00 Contractor Quality Control dated 10 Jul 15 7 4.2.1g 01 50 00 Contractor Facilities dated 10 Jul 15 4

Appendix 4.2.2 A&E Expectations Summary, GS-04 Attachment-1 dated 05 Feb 13 48 Appendix 4.2.3 AF Form 813 dated 30 Jan 13 1 Appendix 4.2.4 AFPAM 23-1004 Volume 2, Working in the Operation Flight

Maintenance Engineering dated 01 Nov 12 107 Appendix 4.2.5 Airfield Construction Temporary Waiver Application Form dated 10 Jul 15 1 Appendix 4.2.6 Constructability Checklist dated 10 Jul 15 7 Appendix 4.2.7 DD Form 254 DoD Contract Security Classification Specification dated 12 Jan 15 2 Appendix 4.2.8 DOD Engineering Design Criteria Index dated 26 Oct 12 104 Appendix 4.2.9 Engineering Technical Letter Listing dated 26 Oct 12 15 Appendix 4.2.10 Excavation Permit dated 10 Jul 15 2 Appendix 4.2.11 Green Procurement Recovered Materials Determination Form dated 10 Jul 15 2 Appendix 4.2.12 MicroPAVER 6.5 Brochure dated 15 Jan 14 25 Appendix 4.2.13 MicroPAVER 6.5 Manual dated 15 Jan 14 303 Appendix 4.2.14 Project Manager’s Guide to Design and Construction dated

28 Sep 12 93 Appendix 4.2.15 Shop User Outage Request dated 10 Jul 15 1 Appendix 4.2.16 Temporary Air Field Waiver dated 10 Jul 15 1 Appendix 4.2.17 Tinker AFB Plan 19-2, Spill Prevention and Emergency Response

Plan dated 15 Dec 14 313 Appendix 4.2.18 UNIFORMAT- II- Elemental- Classification for Building

Elements dated 13 Jan 14 109

Appendix 4.3 Environmental Requirements dated 10 Jul 15 9

Appendix 4.5 Workload Data

4.5.1 MILCON and Work Order Evaluation Workload dated 10 Jul 15 1

4.5.2 Technical Engineering Support Workload dated 10 Jul 15 1

4.5.3 Project Workload

4.5.3a Design Project Workload dated 20 Oct 15 23 4.5.3b Protective Coating Project Workload dated 10 Jul 15 7

4.5.4 Construction Management Workload dated 10 Jul 15 25

4.5.5 Work Order by Contract Workload dated 10 Jul 15 12

4.5.6 Real Property Listing Workload dated 10 Jul 15 53

4.5.7 Roads, Driveways, and Parking Lots Workload dated 10 Jul 15 5

Appendix 4.6 Government Furnished Property

4.6.1 Government Furnished Property dated 24 Jul 15 32

4.6.2 Government Furnished Facilities dated 7 Apr 15 4

4.6.3 Government Provided Furnishing dated 17 Jul 15 17

4.6.4 Government Provided Tools and Equipment dated 17 Jul 15 4

Appendix 4.7 Deliverables 11

And Attachments Attach A004 Etl 04_2 dated 05 Jun 15 47 Attach A004 Etl 97_17 dated 05 Jun 15 11 Attach A004 Rubber Removal & Stripping Contract dated 10 Jul 15 1 Attach A005 AFMC Generic RD Template dated 10 Jul 15 19 Attach A005 Example_RD_TAFB_Control_Tower dated 10 Jul 15 25 Attach A005 Example_RD-TAFB_Hydrant_Fuels dated 10 Jul 15 14

Attach A005 Example_RD-WPAFB_Security_Forces dated 10 Jul 15 31 Attach A008 Design File Index dated 10 Jul 15 1 Attach A008 Design Milestones Table dated 10 Jul 15 1 Attach A009 ACES PM Required Fields for Design & Construction dated 10 Jul 15 1 Attach…