Exhibit_B_Title_Sheet-_Dixon_Landing_Park_Scoreboard_Replacement_Project.docx
DOCX document 21 KB Posted
- Attached to
- Scoreboard Replacement Project
- Solicitation number
- 25-1038
- Issued by
- Santa Clara County, California
About this file
This document is an Exhibit B Title Sheet for the Dixon Landing Park Scoreboard Replacement Project, issued by the City of Milpitas, California. The project involves the complete removal of three existing scoreboards at Dixon Landing Park, located at Milimont Dr. at Jurgens Drive, and their replacement with one large Daktronics BA2014 scoreboard and two small Daktronics BA624 scoreboards. The scope of work includes demolition of existing above-ground and below-ground structures, filling previous footings with engineered slurry, installing new supporting structures and scoreboards per AKH Structural Engineers' plans dated 3/15/24, and updating electrical connections to meet 2022 building and electrical codes.
The project is part of a broader City of Milpitas initiative to replace scoreboards at three city locations, with the city purchasing and providing all seven scoreboards and necessary building permits. The contractor is required to perform at least 50% of the work directly, with the option to subcontract up to 50% of the project. Electrical work will involve replacing conduits, conductors, and disconnects while ensuring compliance with California Electrical Code standards, including specific load determinations and grounding requirements. The project will adhere to multiple 2022 and 2023 building codes, including CBC, CEC, CEnC, CalGreen, and MMC, with comprehensive documentation including demolition plans, site plans, structural drawings, and structural calculations.
View the file
Other files
Show all 35
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
| Project Name: | Dixon Landing Park Scoreboard Replacement | |
| Address: | Milimont Dr. at Jurgens Drive (northwest corner) | |
| Applicable Codes: | 2022 CBC, 2022 CEC, 2022 CEnC, 2022 CalGreen, 2023 MMC |
Scope of Work:
Demolition
1. Remove three of three existing scoreboards, including:
a) All above ground supporting structures
b) All below ground footings
c) Disconnect existing electrical as necessary Footings
1. Fill previous footings with engineered slurry fill. Place new footings per AKH Structural Engineers, Inc. plans dated 3/15/24.
New Scoreboard Installation – one large (Daktronics Model BA2014) & two small (Daktronics BA624)
1. Install new scoreboard supporting structures per AKH Structural Engineers, Inc. plans dated 3/15/24
2. Mount new scoreboards per AKH Structural Engineers, Inc. plans dated 3/15/24 Electrical at Each Scoreboard
1. New scoreboards electrical loads are equal to or less than those of the existing boards being removed.
2. Over current protection, conduits and conductors from the panel to the new disconnects are existing to be re-used.
3. Replace existing above ground conduit and liquid tight from disconnect with new above ground conduit and liquid tight.
4. Conductors shall be sized per CEC Table 310.16 and shall be listed for wet service.
5. Conduits shall be sized per CEC Chapter 9 Tables 4 & 5.
6. The load determination shall also consider Case B and Case C from ASCE 7-16 Figure 29.3-1. Case B required for all scoreboards, and Case C required for the 20’-0” W x 8’-6” H scoreboard (BA2014).
7. Install new electrical disconnect. New disconnect shall be NEMA 3R (outdoor/rainproof) and shall be sized no smaller than the electrical load of the scoreboard.
8. Install minimum of one new ground rod in accordance with CEC 250.52(A)(5) and CEC 250.53.
9. Connect scoreboard to new conduit
| Demolition Plan: | Yes | |
| Site Plan: | Yes | |
| Structural Drawings: | Yes | |
| Structural Calculations: | Yes |
File details come from the government source that posted it. Updated .